Problem while transporting query from development to quality
Hi ,
At the time of collecting objects, we are getting an error.
Object '48NYONN6RPXN7Q9YDS6DWSM35' (ROUT) of type 'Routine' is not available in version 'A'
(Infact similar error statements round 16 are displayed).
I don't see any object as such.
i don't understand what the problem is? pls help.
Rgds,
Raghu
Hi
Go to table RSZCOMPDIR and enter this in the comp id
48NYONN6RPXN7Q9YDS6DWSM35
it will give you the technical name of the variable or the report .
if it is variable transport the variable first and then transport the report.
This will solve your problem.
Reggards
RaM
Similar Messages
-
Problem transporting Request from Development to Quality Assurance Server
Hi All,
I m facing a problem of Transporting requests from one System to other.
When adjusting the Request ,the error message reads as follows :
<b>RFC system error in system/destination
[email protected]_HSE</b>
Now,when I check the RFC Connection for <b>[email protected]_HSE</b>,,
i get the message :
<b>" License Check required "</b>
Please respond to this query urgently.....
Thanks in advanceHi!
I think it's better to call SAP support, if you have problems with the licenses...
Maybe your company forget to pay their fees since a while
Regards
Tamá -
Transporting ODS from Developement to Quality server
Hi,
In Quality server I am haveing ODS with out one navigational attribute included in it but it contains data.same is avaliable in development with navigation attribute object included in it.Now we want to transport this ODS from development to Quality.Kindly let us know if we need to delete the data from ODS in quality before moving this ods which is in the delevopment.Technical name for both ods is same.
Regards,Hi,
You don't have to delete the data. The transport will work fine. But, the more data you have, the longer the transport will take.
Cheers,
Kedar -
Transporting Report from Development to Quality
Hi,
1. I need to transport Report & Custom Data Source from Development to Quality System. Please help me about procedure & prerequisites .
2. When I search a report from Business Analytics--> Design Reports . I need Hide some reports. Do we have any such possibility ?
Regards,
RohitRohit,
As Eduardo said there is a possibility to Assigned to a Work center a way to make Reports visible to users. But from 1405 we can control the Visibility of Reports as per business role as well.
Please follow steps below to make this feature available:
1) Go to "Administrative Analytics Settings" configuration element.
2) Check the check box of " Allow the assignment of Business Roles "
This will show one more Business role Tab when you are trying to assign the reports.
Please see image for details. -
Transporting content from development to quality
Hi,
What is the steps involved in transporting the EP content from EP development system to quality as well as production system.
Thanks,
KundanPlease try searching before posting. There are all sorts of good information about transporting in SDN and help.sap.com.
-
Transporting infosets from Development to quality and then to production
Hi,
I created a infoset in development under the Standard Area.
I want to move it to Quality and finally to production after the testing. When I created the infoset it never asked for any package and transport request.
How should I go about this ?
TIA
Rahulwhen you are in transaction SQ02, click on the truck button (Transports)
you will get to the transport utility. This one allows to export/import infosets, usergroups and queries from a system to another.
select the type of objects you want to transport (you may need to do it once for usergroups and once for infoset + queries)
look at the Information button to know how it works -
Transporting Objects from Development to Quality
Hello Friends,
I am working on a project where I have created Cubes, InfoObjects, DTP, Transformations and Open Hub Destinations in a Development Client.
Now It's time to transport all these objects in to Q-Client.
Can any one let me know the steps to do so? This is really very urgent.
Your help is greatly appriciated.
Thanks in advance,
KavitaHi
Before transporting your complete data model
Transport all the required info objects and its attributes First.(If you do not tranport the info objects first then when you transport the infosource the import will be failed saying that inactive info objcts found)
Then replicate the required datasources in the target system. (If you do not replicate before transporting the request into the target system then it will give an error log saying that Fields does not exist in the dataosurce XXXX)
So do the above two steps first and then proceed
Then you can collect all the objects , Cube , Infosource, ODS, Open hub etc and transport it.
You can transport from SE01 or SE09
Go to SE01
Select Modiafiable and display.
Release the task of the corresponding request first and then the Request
Go to STMS and then select your target system and import the transport request.
Regards
M.A
Edited by: M.A on Jun 19, 2008 10:05 PM -
Problem in transporting dc from development to test
Hello Everybody,
I have released nine activities for Java dictionary tables dc seperately.
Then i have clubed rest of the Java dictionary dc activities into single request and then released.
In consolidation tab of CMS of transport studio, I selected all these release activities and imported into assembly tab. But, it failed showing that Assembly failed.
I went to the log and it was saying that DC is broken.
it means Dc cannot build by CBS properly.
What should be the reason behind this?
Application is working perfectly on Development environment.
Thanks in advance,
BhavikHi Helmut,
Yes I expalin you what happened actually.
We have imported those three SCAs in developement and then in consolidation system too. But, at that time we have checked the checkbox "Desable automatic deployment" in runtime systems tab for consolidation system. So, It didn't deployed automatically on consolidation system.
But, now we have changed it and unchecked the check box. Now, we have imported those three SCAs once again in development. They were successfully imported in developement system. But they are not showing in consolidation system as "waiting for Queue".
So, how can I import those in consolidation system?
I have tried importing those SCAs 3 to 4 times. But, same thing happens each time. It doesn't show those SCAs in consolidation as Waiting for import.
And because of this reason, our DC is failed in assembly.
So, how can we import those SCAs in consolidation system?
Thanks,
Bhavik -
Hierarchy transport from developement to Quality?
Dear SDN,
Hierarchy transport from developement to Quality.
I have created one balance sheet Hierarchy on 0Account infoobject.
Could you please tell me how to transport hierarchy from development to Quality.
Waiting for response.
Thanks & Regards,
KiranHi Kiran,
Kiran Hierarchy data can be loade from source system, flat file or manually maintained in system.
since you have done manulally you can do the same in other systems also, but you need authrizations to maintain manually
I have manually created my balance sheet hierarchy using RSH1 transaction code.
you have do the same in quality also, since all required infoobjects are available in quality system, manulally create balance sheet hierarchy using RSH1 transaction code in Quality system.
check whether you have authorization to manually create in Quality system. you have to do the same procedure in production also i guess.
Regards
Daya Sagar -
Transport the created Storage Bin Automatic from develop to quality LS10
Hello,
My customer has created a new entry in LS10 u2013 Create Storage Bin Automatically in the development system with a transport order.
He forgot to do Environment u2013 Create bins. I did it with my user in the development system and SAP has created the bins automatically (the system creates and launch a batch-input). The system did not ask me for a transport order (I think because this created data is master data).
The user has transported the transport order from development to quality system but the Storage Bins are not in QAS. I told to the user that the Storage Bin are master data and we has to do Environment u2013 Create bins in each new environment but LS10 transaction has status 'not modifiable' in quality and production system.
There is a way to transport the created Storage Bin Automatically from development to quality and production? Now the user is asking me to have the Storage Bins in quality and production with access LS10 in status 'not modifiable'.
Cheers,
MartaI could not transport them but I have created the storage bin directly in QAS with LS05 because LS10 is not available.
Thank you very much. -
Transporting data from Dev to quality using CMS
hi....Fri's
i am transporting data from development to quality, igetting this error
Workspace was not defined for software component version PROC_SA_PROJECT , 1.0 of unilever.com Assign the software component version in the Landscape Configurator of the Change Management Service to a track..
who will define the workspace for the SWCV, how can i rectify this error.....
thanks in advance
Pasi.hi pasi,
just got to the link
http://host:port/devinf/main.
it will ask for cms user,get the details from basis.
afte login go to LANDSCAPE CONFIGURATOR
there select IR.REP and configure respective
consolidation,production .
please eneter in consolidation field " http://<quality host><port>/rep
and production field as "http://<production host><port>/rep
now select IR.DIR and configure similar to IR.REP and replace rep with dir
give consoldated system(QUALITY system) http://<quality host><port>/dir
and and production field as "http://<production host><port>/dir
now cms is done with configuring part
now add the software component which u want to export .
Thanks & Regards,
Rama Krishna -
Transporting an Object from Development to quality and then to Production
Hello SAP Friends
I want to know the step by step navigation for Transporting an Object from Development to Quality and from there to production..
Please give some detailed Navigation...Hi Kiran,
use transport connection to collect the objects to request, rsa1->transprot connection.
use infocube as starting point to collect objects, left side choose 'object type', middle frame choose 'infocube' expand 'select objects', locate/search your infocube' and 'transfer', it will go to right side.
in right up, there are buttons, click 'mode' and choose manual, and grouping 'only necessary objects', and execute, this will collect infocube and required objects like infoobjects, infoarea, etc.
after that change grouping 'in dataflow before' and execute, this will collect update rules, ods, infosource, transfer rules, datasource assigned etc.
remember to assign source system, click yellow box with X icon and mark the source system.
after that use grouping 'in dataflow afterwards' to collect query, web template, role etc.
take a look transport docs
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
Re: Transport Organizer---
transport query (bex objects)
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
hope this helps.
(Courtesy AHP from Re: transport)
Bye
Dinesh -
Transport Table with Data from Development to Quality
Hi
Requirement:
Transporting Table with Values from Development to Quality System.
I have a Z* - table, appended one field at the end.
I need to transport data along with the table structure from Development System to Quality System.
In Development System, I have assigned the Transport request in Client 100(We can't add data to the table in this client).
What needs to be done to migrate the new table structure with Values.
Thanks in Advance
Regards,
Baburaj
NOTE: the requirement is to transport table and table entries through a transport request.
There should not be any manual update for the table in the target System (Quality System).Check the delivery class assigned to the table. Please see the documentation
Delivery class
The delivery class controls the transport of table data when installing
or upgrading, in a client copy and when transporting between customer
systems. The delivery class is also used in the extended table
maintenance.
There are the following delivery classes:
o A: Application table (master and transaction data).
o C: Customer table, data is maintained by the customer only.
o L: Table for storing temporary data.
o G: Customer table, SAP may insert new data records, but may not
overwrite or delete existing data records. The customer namespace
must be defined in table TRESC. (Use Report RDDKOR54 here).
o E: System table with its own namespaces for customer entries. The
customer namespace must be defined in table TRESC. (Use Report
RDDKOR54 here.)
S: System table, data changes have the same status as program
changes.
W: System table (e.g. table of the development environment) whose
data is transported with its own transport objects (e.g. R3TR PROG,
R3TR TABL, etc.).
or during client copy
the data of client-specific tables is copied.
Classes C, G, E, S: The data records of the table are copied to the
target client.
Classes W, L: The data records of the table are not copied to the
target client.
Class A: Data records are only copied to the target client if
explicitly requested (parameter option). Normally it does not make
sense to transport such data, but is supported to permit you to copy
an entire client environment.
or during installation, upgrade and language import
behavior differs here for client-specific and cross-client tables.
nt-specific tables
Classes A and C: Data is only imported into client 000. Existing
data records are overwritten.
Classes E, S and W: Data is imported into all clients. Existing data
records are overwritten.
Class G: Existing data records are overwritten in client 000. In all
other clients, new data records are inserted, but existing data
records are not overwritten.
Class L: No data is imported.
Cross-client tables
o Classes A, L and C: No data is imported.
o Classes E, S, and W: Data is imported. Exisitng data records with
the same key are overwritten.
o Classe G: Data records that do not exist are inserted, but existing
data records are not overwritten.
ehavior during transport between customer systems
Data records of tables of delivery class L are not imported into the
target system. Data records of tables of delivery classes A, C, E, G, S
and W are imported into the target system (this is done for the target
client specified in the transport for client-specific tables).
se of the delivery class in the extended table maintenance
The delivery class is also analyzed in the extended table maintenance
(SM30). The maintenance interface generated for a table makes the
following checks:
o You cannot transport the entered data with the transport link of the
generated maintenance interface for tables of delivery classes W and
L.
o When you enter data, there is a check if this data violates the
namespace defined for the table in table TRESC. If the data violates
the namespace, the input is rejected.
Thanks, -
If I trasport a object from Development to Quality
Dear One's,
I have query, If I trasport a R/3 source system object in BW from Development to Quality and then to Production. How this will reflects in Dev., Qty & Prod. of R/3 source systems?
Thanks in advance,
RajHi Rajasekhar,
when you are talking of the source system dependent objects it should be a datasource.
Data Source should be transported first in r3 and then in transports starts in BW.
When you are talking about BW transports which are not dependent on souce system there is no need to collect the source system while transporting.
When the object is transported to Quality or from quality to production the source system mapping should be accordingly changed to R3 quality and R3 production.
For this to haapen you should maintain an assignment in Rsa1.
go to rsa1> tools> conversion of logical system names.
go to new entries--> enter your r3 development server logical system name and in next column enter r3 quality system logical name.
Save the assignment.
Hope this is helps.
Please correct me if Iam wrong.
Regards
Mahesh -
Error while Transport objects from DEv to QA-File transport
Hai Experts!
While exporting objects from Dev to Quality using File Transport. it taking long time and no erro msg is thown and it is not getting end .Did any face this problem. Can any one help me to solve this.
Regard's
Preethi.Hai!
Issue is solved.
I try to export the Individual object -->Message mapping.
While exporting i unchecked the Option With software component version Defenition.
Now it is success. Thanks all replies.
Regard's
Preethi.
Maybe you are looking for
-
MM - Pedido de Compra - Determinação de Preços por Data do Doc MIGO ou MIRO
Olá Pessoal, Tenho uma particularidade neste momento que talvés possam me ajudar: A empresa onde trabalho atualmente recebe diariamente uma grande quantidade de materiais de compras e boa parte destes materiais possuem variação de preços mensal. Visa
-
Audio Inputs no longer work after upgrade to 10.4.10
Anyone else having trouble with audio inputs after upgrading to 10.4.10? Here's my deal: MacPro dual 2.66, 4GB RAM, running 10.4.10 as of this morning. Upgraded to 10.4.10 today and the mic on my Plantronics USB headset quit working. 'Phones still wo
-
Microsoft Office - Test Drive Complete
I bought a new G5 and sync'd it w/ my old iBook. I purchased Microsoft Office Suite for that computer and now it won't run on my new system. Can someone help me figure out why.
-
Color XML Data Not Importing Into FCP
When I finish rendering my clips in color and I send them to FCP, FCP says importing XML data and the progress bar stays at 50% and doesn't move. Anybody have any clue on what to do??
-
Unable to connect Internet on 16 G IPAD 2 + Sim Message
Hi, Got an IPAD 2 2 weeks ago, and am new to it. I entered my wireless network setting for Wi-Fi, network is detected and everything was working with Internet, mail, MyPad+, Apple store. However since 2 days ago, Internet is not working anymore. I ch