Problem while transporting transfer rules in BW 3.5

Hi All,
I have a problem while transporting transfer rules in BW 3.5.
I have just checked the box for conversion to Transfer structure / Transfer rules of an infoobject and tried to transport it to quality. I got this below error message:
The selections T ZBW_ZBILLRATP_TEXT_BA specify more than one DataSource
Diagnosis
You need to select an individual DataSource based on the selection conditions
InfoSource =
Source System =
Object Version = T
Transfer Structure = ZBW_ZBILLRATP_TEXT_BA
although the select event is not unique.
Procedure
Check the objects to which the selection applies.
Reference to transfer structure ZBW_ZBILLRATP_TEXT_BA not available. No activation possible.
Message no. RSAR436
Diagnosis
Transfer structure ZBW_ZBILLRATP_TEXT_BA should be transported into this system.
However, no DataSource mapping refers to this transfer structure.
System response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer structure ZBW_ZBILLRATP_TEXT_BA is on the same transport request. Use the transport connection to create a consistent request.
Can any one provide me details of how to overcome this issue. I tried transporting all related objects.
Regards
Lakshmi

Hi Lakshmi,
Befor Transporting the Transfer rules, make sure that you are transporting the Active Versions of your Datasource & DataTarget between which your transfer rules exist.
Also make sure that the Transfer rules are active before it is transported.
Hope it helps!
Regards,
Pavan

Similar Messages

Error when transporting transfer rules

Hi, i got an error when i transport transfer rules. i got the following errors in various transfer rules:
Mapping between data source 0CUSTOMER_ATTR and source system EMP300 is inconsistent
AND
Reference to transfer structure 0CUSTOMER_ATTR_BB not available. No activation possible.
I tried to activate the data sources and transport them several times, but i got the same errors. Checking manually i can see the data sources active in my source system, in development and productive instances.
Thanks in advance.
Diego Lombardini

Hello Diego
Do you choose the correct Transfer Structure in DEV?
I mean the one that is assigned to EMP300.
Are you saying that your PROD have the following:
0customer_text_BA
And that your DEV only have the following:
0customer_text_BB
If the answer to the above questions is YES;
Find out if some one has assigned ATTR to 0CUSTOMER directly in PROD or somebody has changed 0CUSTOMER_ATTR in DEV without transporting it to PROD.
I think that one way to resolve this problem is to use the option "overwrite origanls" in STMS.
Use it with caution and do not mass transport when you use this option.
Good luck
/FZA
Message was edited by: Fariborz Zangoui
Message was edited by: Fariborz Zangoui

Error while installing transfer rules for 0PM_C03 from Business content

Hi All,
When i try to install the transfer rules for the Infocube 0PM_C03 from the Business Content, i get the following error:
"Mapping between 2LIS_17_I3HDR 2LIS_17_ORDER is inconsistent".
Here 2LIS_17_ORDER is the Infosource, and 2LIS_17_I3HDR is the datasource.
Also, kindly let me know how can the Infosource and the datasource have different names, like in the case for this Cube.
Kindly help...

Hi,
The datasource and infosource can have different names no issue with that.
and while selecting transfer rule for installing find with '2LIS_17_I3HDR'.
Regards,
Rathy

Error in Transporting Transfer rule/structure to Q for generic DS

Hi,
We're in NW2004s. we're getting error when we transport Transfer Rules and Structure of generic data sources to Q.
In R3 Q the DS is active and it pulls data in RSA3 and it is replicated and all the fields are available in BW side as well, but when we transport TR/TS i still get error saying the Datasource is not active. This happens only for generic ones.
Any idea.
thanks
Mayil

Hi,
have you inserted both the transfer rule and the communication structure in the same change request?
When you transport an InfoSource, all it's dependent objects must be present in the same change request; in this way the datasource will be activated.
I hope it helps you,
Vito

Error message while upgrading transfer rules

hi
while migrating transfer rules to transformations
i am getting
automatic time convension not possible for source field kmonth.
i say continue and continue i got transformations
whjat is this message how can i solve

Hi,
Please check the settings for the mappings in the Transfer Rules. Also, have you made some settings for "kmonth' ?

Transport Error while moving Transfer rules - RS_ISMP_AFTER_IMPORT for object type(s) ISMP ( )

Hello Experts
Strucked up with an issue while transporting the Transfer rules that are created for an UPFILE source system.
Transport is included with list of Data source Replica, Transfer rules, Transfer structure and Info Package.
My data Source : ZVPRCRDT for an UPFILE
Below is my error screen :
Tried to resolve the error by moving the Data source Replica as an individual Transport.
Still see the same error and my data source is active in the current system.
Looking for a resolution to find out the root cause.
Any help is appreciated...

Thanks for your response Ram.
My Source System UPFILE is in active mode.
Unsure why system is throwing error as source system assignement was inconsistency.
All fields are mapped perfect with one-one relation.
Worked by reassigning the UPFILE - source system to the data source but still i m seeing the same error : Data Source doesnt exist in source system of version A.
Transported the DS alone to Quality initially where i m unable to find the transported data source in my quality(target). DO i need to perform replicate meta data ...something like that in quality so that imported data sources will get refreshed?
If so can you let me know the approach.
Thanks

Transports(transfer rule)Problem

Hi Experts,
Bi Patch :16   BI_CONT :8
We are moving from DEV to QA.i ve transported infoareas,infoobject catalogs and infoobjects.
now im trying to transport master data infosources UR and transfer rules.
im collecting the objects in the following manner.
Ex:0material
Grouping :in data flow before
collection mode : automatic
Here im unable see the transfer rules but UR and infosources are there.(in transport connection screen)
Conversion of logical system names
in Dev i didnt maintain any thing
in QA i ve mainted Conversion of logical system names as
*Original S S            Target S S
BI DEV                     BI QA
R3 DEV                    QA DEV
I havnt chkd the box 7.0.
Assgnment of source system to source system id
here i clicked on suggest source system ids
i ve AU and AU.
Even i did a trail with transporting the request to QA but no luck it ended with error 4,but not getting anything even info source or UR etc.........
Plz help me,suggest me solution its very urgent.
Thanks,
Yunus

hii check the foll links and award some points
Re: Transfer rule error
Re: Transfer structure problem

Error while Transporting Update Rules.

hi xperts,
   I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
    Start of the after-import method for object type R3TR ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Is the error,I didn't change any thing in the Cube or changes to Update rules.
Can anybody Help me?.
   thanking you,
                               with regards,
                               Narendra.

Hi,
Are you still facuing the issue ?
No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
If you know the technical names of the routines you can check in the TADIR table.
Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
Hope it helps.
Thanks,
Soumya

Error while transporting update rule.

Hi experts
I am trying to transport one update rule to production..
But it is ending with error code 8 n it is giving me following error :
      Errors when activating update rule XXX
      IC=0PP_DS03 IS=0CO_OM_OPA_6 error when checking update rules
Kindly tell me what need to be done now.
Regards
Swati

Hi Swati,
Before transporting the update rule, in the present scenario, you have to transport the infosource which contains the corresponding "0recordmode".
Whenever you transport anything into the quality or production, the list should be as followed in the given manner :
Seq No     Objects in Request
1     Package(DEVC), InfoArea(AREA), Application Component(APCO)
2     Function Modules
3     Keyfigure Catalog(IOBC), Keyfigures(IOBJ), Units(IOBJ)
4     Characteristic Catalog(IOBC), Characteristic Infoobjects(IOBJ)
5     Infosources (ISCS, ISTD, ISMP, ISTS, ISFS, ROUT) and
                Generic Data Sources(DataSrce Active Version(OSOA), ISMP, ISTS,DataSourceReplica (ISFS)
                and Tables (TABL)
6     Infoproviders(ODS(ODSO), Cube(CUBE), Infoset(ISET))
7     Update Rules(UPDR, ROUT)
8     Infopackages(ISIP)
9     Queries(ELEM)
10     Webtemplates(TMPL, BLTM, BPTM)
Just transport all your things in the above sequence, and it will be done successfully.
Also, remember there should not be any data in the corresponding infoprovider while you transfer the update rule, else it will fail.
Hope it helps,
Regards,
Neha.

Error while activating transfer rules needs help.

The error while activating 0FI_AP_6 transfer rules is listed below.
''InfoObj. 0DEBITOR from fld KUNNR of dataSource 0FI_AR_6 is not active but BCT ex. -> Dtl'' how to resolve this issue and activate transfer rules?

Hi
The problem is with your data source replication.
Activate your data source & replication too.
Activate your transfer atructure through RS_TRANSTRU_ACTIVATE_ALL .
If not so, Activate your transfer rule manually.
Regadrs
Saravanan.ar

What are the objects need to collect while moving transfer rules to quality

Hi All,
In production data loads we have faced alpha conversion errror for the customised object ,so chkd transfer rules in that the conversion box is not chkd for that particular infoobject.So i have chkd that box in dev and activated the transfer rules.So now to transport to quality what are all the objects i need to select ?.
If i drag drop the transfer rules in transport connection it shows like none of them are selected even infoobjects,infosource,source system and the selection box is inactive for transfer rules.
So please provide me inputs how to goahead....Thanks

Hi,
While activating the transfer rules(after changes)-it proposes you the request number .. that u can transport to target systems.
Else, using transport conn--> select only necessary objects in grouping --> find ur transfer rules and transport it.
you can expand all the objects and check only required ones (uncheck others and source sys, coz ss cant be transported)
Thanks,

Problem in activating Transfer rules

Hi Experts,
I could not able to activate transfer rules using program "RS_TRANSTRU_ACTIVATE_ALL" by giving source system name and Infosource in Quality system.I am getting success status "No Transfer Structure Selected" but still transfer rules are in inactivate.I tried replicating data sources also still problem persists.
Please provide any suggestion how can i go about it.
Edited by: Sunilbm on Oct 30, 2009 12:16 PM

Hi,
Is there any error message when the transfer rules are transported from Dev to Quality?
Are the transfer rules transported from Dev to Quality successfully.
Post the message if any when the transport request is moved from Dev to Quality.
Regards,
Rama Murthy.

Transporting Transfer rules

Hi All
Trasnfer rules are source system specific. In development say we have created them for BW-Dev to R/3 Dev. While transporting them to production. How will we change the assignment from BWDev-R/3DEv to BWprod-R/3 Prod.
Thanks PB

You are right,
but if you want to transport anything directly to your production environment you have to build a consequent landscape...where is your problem ?
We are talkin'about source system mapping assignment, but starting from the assumption that you can do this type of transport accordingly to your landscape !
Bye,
Roberto

Cannot transport transfer rules!

Hi,
We have a problem transporting the transfer rules from BWD to BWQ.
Here are the steps I did :
New object ZZRANK was added to user exit on R/3 dev. and transported
New infor object ZZRANK was created in BWD
ZZRANK was added as attribute to 0PLANT (mater data)
Transfers were created and comm struc updated.,
testing was successful in Dev, r3 changes were transported to Q and BWD transports to BWQ. ALL info objects transported successfull but the transfer rules failed. Cannot determine why.,
   Start of the after-import method for object type R3TR ISMP (Activation Mode)
   Mapping between data source 0PLANT_ATTR and source system PR2200LS is inconsistent
   Field ZZRANK will not be delivered from DataSource 0PLANT_ATTR in source system PR2200LS
   Mapping between data source 0PLANT_TEXT and source system PR2200LS is inconsistent
   Field KEY1 will not be delivered from DataSource 0PLANT_TEXT in source system PR2200LS
   Errors occurred during post-handling RS_AFTER_IMPORT for ISMP L
   The errors affect the following components:
      BW-WHM (Warehouse Management)
Any help is appreciated.

You may have to replicate your data source on BWQ.
First replicate and then send your transport again from BWD to BWQ.
Regards.
Sanjay
Message was edited by:
        Sanjay Sinha

Error while creating transfer rules.

Hi
I am creating transfer rules and a error message says " IS_00_BB does not exist". (IS_00) is the desc. of the info source)
can someone help me on this????
I had created transfer rules for another cube in the same info area, but no error had come then..
Thanks.
Aswath.

Hello,
The problem you are reporting could be that you are using the Transfer
Method 'IDOC' for the affected transfer rule(s). You should use the
'PSA' transfer method (rather than the 'IDOC' method), as the IDOC
method is very old.
If so, please change the transfer method in the affected transfer rules
to 'PSA', then try to activate the transfer structure again. This should
solve the problem, in which case, please let us know by clicking on the
'Close' button.
If the problem persists please create the report that is relevant for your system release
as per the SAP note 493422 and execute the report in your system, the report can be
created in se38, please talk to your basis team if you have problems creating the report.
Best Regards,
Des

Problem while transporting transfer rules in BW 3.5

Similar Messages

Maybe you are looking for