Problem while uploading Parallel Unit of measure in MM02 through LSMW

Hi Guys,
I am uploading data via LSMW using BDC Recording for MM02.
1)Actually when I am uploading Alternate & Parallel Unit of Measure records it is only taking upto 11 records bcoz after 10th record it is a table control .I heard that Table control can be handled using a flag and make that flag to 'X'.
Where is this FLAG how to handle this in LSMW program.
2)And one more requirement is if I already uploaded Alternate Unit of Measure.How to upload Parallel Unit to one of the Alternate Unit.
I need to do this requirements in LSMW.
Or is there any other way i can do this?
Thanks,
Prasad.

for this you can use below LSMW BAPI method.. here you have separate strcture you can pass multiple values more than 10 also...
Business Object      BUS1001006   Standard material
Method               SAVEDATA                    Create and change materia
Message Type         MATMAS_BAPI                 Create and change materia
Basic Type           MATMAS_BAPI02               Create and Change Materia

Similar Messages

Long text problem while uploading Inspection plan through BDC.

Hi,
I am facing some problem while uploading the inspection plan. There are few MICs for which we are having long text, while uploading the inspection plan through BDC - some other long text is getting copied into the MIC's long text. After checking I came to know that in function module, read_text - some text which is stored in ABAP memory is getting copied into the inspection plan.
I am working in SAP release 4.7. I have checked with SAP notes: 97419, but it is also not satisfying.
Waiting for quick solution.
Thanks in advance.
Fahié

Hi a®s,
Thanks a lot for your kind reply.
My requirement is I want to maintain long text for few MICs (which are not having long texts at MIC level) in inspection plan (QP01).
When I am trying to manually assign the MIC's to inspection plan (QP01), long text is copied whereas I am not clicking the long text icon in (QP01). Long text is not maintained in MIC level, still some long text is copied to this MIC. This was also happening while uploading the inspection plan thro' BDC.
I believe what you have mentioned about function module SAVE_TEXT cannot be used here since long text is already copied before we pass the long text. Also if we pass some long text, still apart from the long text what we have passed there is some other long text copied (extra long text).
Waiting for quick solution.
Thanks in advance.
Fahié

Problem while uploading bank details in Vendor Master - XK01

Hello Experts,
I am encountering a problem while uploading Vebndor Master Details in Quality server . The bank details for a given bank (Eg : BankABC and Bank Key IN) throws an error saying BANK IN BANKABC DOES NOT EXIST . But , with the same details i am able to upload in Sandbox and Development Servers. Pls suggest on the same.

Hello again,
Thank you for the inputs.
Venkat,
All the required fields are active. Please give some more input.
Rob,
Bank is supposed to be created during the upload. The bank details which already exists in the sytem are not throwing the error. Please give suggestions for this scenario.
Regards,
Trishna

Problem while uploading data with GUI UPLOAD Function

Hi,
I am facing problem while uploading data with FM GUI UPLOAD in out text file there are 7 row but after the FM GUI UPLOAD there are 14 entries are coming in Internal table and each alternate row is coming as blank with 0000 in some column in internal table first row is proper and second line is blank so on.
what can be the problem .
The program in which we are using this we are using it from last 2 year but we are facing problem today only.
regards,
zafar

Hi,
The file formate is same as it is from last two years it is automatically generated by one another bar code server and there is no change in the file formate.
So waht can be the problem to check any inconsistancy in system i have develop a samll program fro uploading a text file with same function module , but it is working fine.
regards,
zafar

Material upload: alternate unit of measure problem

Hello,
I'm uploading materials using LSMW (BAPI nethod: BUS1001006). I have a problem for the records with alternate units of measure. I put the units in a separate file and map the ISO code and the Numerator. However, I receive an error M3333 for the materials with 2 rows (one basic UoM and other alternate), which says that I have to maintain conversion factors for the alternate UoM. I thought, I'm doing so by providing Numerator (E1BP_MARM-NUMERATOR), but somehow it's not enough.
Any assistance will be highly appreciated
Thanks in advance,
Eli

Wrong definition in MARMX structure.

Error while creating PO -- Unit of measure not defined for lanuage ZH

Hi all,
i have created the PR with EA as UOM. Then while creating PO, i am getting error like
' Unit of measure not defined for lanuage ZH' .
Then I execute CUNI
Then menu is GOTO > Translation > units of measure
enter source language and target language . After this i am getting the below message
---> Language not available on server
Please suggest what i should do. Thanks.
Thanks
pabi

HI Pabi,
Go to material master for material in purchase requisition, the Go to Additional data and maintained language as ZH in material master data.
Also the other possibility, that if in your case purchase requisition are converted to purchase orders through background jobs,
then check the background job execution in SM37 whether that background job has been triggered twice parellely in the background, which could have resulted in locking of same purchase requisition at same time and hence your are getting the Error.
Br,
Tushar

Problem while uploading data from flat file

hi friends,
suppose if there are 100 records in flat file , if 20 records uploaded with out any problem and if error occurs while uploading remaing data . is necessary to upload entire data again or else only remaining data should be uploaded?
i had used call transaction for purchase order application?
please give me reply soon its urgent
thanks & regards
priya

Hi Hari,
you have to upload the remaining data.
as u have used CT method, do 1 thing trap the error data in runtime & prepare another flat file. next time correct the data in new flat file. & run the DBC program again with this new flat file.
Reward if useful
Regards
ANUPAM

Problem while uploading data through F-43

Hello Experts ,
I am facing a problem while data uploading through F-43.
Suppose I have many vendors with having several debit and credit items for each.So in t code same screen will appear for same vendor several times where we have to enter debit / credit items.
Please suggest how to solve this issue through LSMW/BDC program.
Thanks in adv.
A Miter.

Hi..
Use BDC Recording MEthod ...
Develop BDC program, Before Recording the Transaction sit with Functional Consulatnt for REcord The f-43.
After that that u can do ur coding and built ur own logic.
Prabu

Time out problem while uploading large bpel processes into oracle soa suite

Hi everyone,
I'm using oracle soa suite 10.1.3.4.0 and I'm encountering time out problem while trying to upload a 5MB bpel process into my bpel process server located in the LAN network. The error is coming from apache common file upload.
Is there a way to increate the connection time out for oc4j to avoid this problem?
Thanks for any help.
Regards
Esfand

Hi Marc.
Thanks for your reply. I increased the transaction manager time-out but still I have the same problem. I believe this is something related to oc4j settings and related to upload bpel process. here is my stack trace output:
79: A problem occured while connecting to server "192.168.0.12" using port "8888": bpel_JazbModaresJadidBPEL_1.0.jar failed to deploy. Exception message is: javax.transaction.RollbackException: Timed out
at com.oracle.bpel.client.util.ExceptionUtils.handleServerException(ExceptionUtils.java:94)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:324)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:341)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: oracle.oc4j.rmi.OracleRemoteException: An exception occurred during transaction completion: ; nested exception is:
javax.transaction.RollbackException: Timed out
at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:152)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:57)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:319)
... 25 more
Caused by: javax.transaction.RollbackException: Timed out
at com.evermind.server.ApplicationServerTransaction.checkForRollbackOnlyWhileInCommit(ApplicationServerTransaction.java:664)
at com.evermind.server.ApplicationServerTransaction.doCommit(ApplicationServerTransaction.java:273)
at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:162)
at com.evermind.server.ApplicationServerTransactionManager.commit(ApplicationServerTransactionManager.java:472)
at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:137)
... 33 more
Total time: 4 minutes 30 seconds
The bpel jar file is about 2MB and is uploaded from my machine located in the same LAN.
Any hints?
Thanks
Esfand

Error while defining alt unit of measurement in material master

All SAP gurus,
i am trying to define a alt unit of measurement in a finished material, the base unit of measurement is in MT, and the sales unit is nos. the conversion formula is 53 nos = 1kg i.e. 1MT = 53000 nos. as conversion can be done only with base unit of measurement i am giving 53000 nos = 1 MT, but system unable to calculate the conversion as it is not taking mere than 3 digit after decimal.
e.g. if 53000 nos = 1 MT
then 1 nos should be = 0.000018 MT
but system not taking this value as this value contain 6 digit after decimal
suggest me what can be the way out? with detailed steps. can i increase the post decimal value or i have to define another middle alt unit of measurement (like KG). and if that is to be done then how.
Regards
BKR

Hi,
With help of Basis team check the decimal places for u r user ID.
In t-code SU01 >>> Under Default tab
Kapil

Problems while uploading Task List - Service Pack with LSMW

We are trying to upload General Maintenance Task List using LSMW. We are using Standard Batch/Direct Input method with Object 0490.
We need to upload task list header, operations, maintenance pack, component and service pack for operations.
We have created separate files containing data for different structures and they are linked using Group, group counter and operation number according below
Header
|----Operations
.......... |----Long Text
..........|----Maintenance Pack
..........|----Components
..........|----Service Pack
We have multiple operations per task list and multiple services per operation. The service pack is required only for a specific control key - PM03. As per the configuration this screen (PROGRAM - SPLMLSP, Screen Number - 0200) is accessible only when the value PM03 is entered in the operation. We are able to upload all other details except service pack details. We have tried using structure IBIPBDCD for the same.
While uploading the task list in foreground, when control key is entered as PM03 in an operation, service pack screen is displayed with error u201CNo batch input data for screen SAPLMLSP 0200u201D. The data provided in structure IBIPBDCD does not get processed at this time.
On exiting the screen using back button, the data in IBIPBDCD structure is passed incorrectly to fields in screen 3400 (SAPLCPDI)
Are we doing something incorrect? Is there a way to use this standard functionality to upload task lists with service packs?
Thanks
Edited by: jvalitp on Dec 15, 2011 12:46 PM

Hi,
When loading the tasklists you need to define a source structure as per the IBIP structure. You have different levels for example level 1 - header then below that level 2 - Operations, Header Long text then below that you have level 3 - Operation Long text, Operation Package assignments, operation component allocation.
For each of these levels you need an identifier that links then together. In your source file specify identifier 1 for header, Identifier 1 and Identifier 2 for operations, identifier 1 identifier 2 and identifier 3 for packages. This way the system can create the correct structure when it reads the data from the text file.
The identifiers are numeric and will dissapear once the files are loaded. specify then in the source structure as 2 characters and remember to set the xcel file up to have a 2 character field.
For the header file each line will be a new identifier 1,2,3,etc.
The operations are assigned to the header and have 2 identifiers. The first corresponds to the header identifier the next is a sequential number stating at 1 and incrementing for each line e.g Header 1 op 1, header 1 op 2, header 2 op 3, header 2 op 4, header 2 op 5 (this would be 2 header records. The first with 2 operations on it the second with 3 operations)
The package is assigned to the operation and as such needs to have a third identifier. Header (identifier 1), Operation (identifier 2), Package (identifier 3) Example Header 1 op 1 pack 1, header 1 op 2 pack 2, header 2 op 3 pack 3, header 2 op 4 pack 4, header 2 op 5 pack 5
I have a loading file for each of the items i.e. Header file, Operation file, maintenance package file. This is then assigned to the respective source structure.
Regards,
ravi

Problem while uploading FF_5

Hello,
We are uploading the bank file using FF_5. when we upload the file the file is getting uploaded but showing error message difference is to large for clearing. When we check in FEBA the items in files are displayes as TO BE POSTED.
Can any one let me know the reason of the error.
BR,
Zulfikar

Hi,
Thanks for your response on this.
In my text file korean language is there....but while uploading this text file containing korean language properly formatted in the tcode ff.5 then it is not recoginising that text and also the format of the data is changing...
PLz suggest on that...
Regards,
Rohan.

Problems while uploading text documents into Unicode Database

I just upgraded our database from 9iR1 to 9iR2 (9.2.0.1.0). The server
character set is AL32UTF8. Now I'm facing a problem when
uploading text documents into the database via a web frontend.
I use the upload table defined for the PL/SQL Database Access Descriptor:
create table TB_UPLOAD (
NAME VARCHAR2(256) not null,
MIME_TYPE VARCHAR2(128),
DOC_SIZE NUMBER,
DAD_CHARSET VARCHAR2(128),
LAST_UPDATED DATE,
CONTENT_TYPE VARCHAR2(128),
BLOB_CONTENT BLOB);
After uploading a text document containing the two words "hallo welt",
the following statement returns not "hallo welt", but "68616C6C6F2077656C74":
declare
b_loc blob;
v_amount integer := 100;
v_buffer varchar2(100);
v_offset integer := 1;
begin
select blob_content into b_loc from tb_upload where name like 'mydoc.txt';
dbms_lob.read(b_loc, v_amount, v_offset, v_buffer);
htp.prn(v_buffer);
end;
What is this? I studied the documentation, but didn't found a solution.
When trying to use Oracle's built-in procedure wpg_docload.download_file,
the content is shown the way it should be. Unfortunately, I can't use
wpg_docload.download_file in order to copy the BLOB content to another table.
Any hints would be appreciated!
Thanks so much in advance!
Roman
E-Mail: [email protected]

Hi Roman,
the upload uses a BLOB (Binary Lob). Your Document is
stored as is in the binary representation. If you
use dbms_lob.read on a blob and your buffer is a varchar2 the binary representation is not translated!!!
use a raw for the buffer and utl_raw.cast_to_varchar2
to do the conversion to varchar.
try this
Procedure SHOW_DOC(p_name doc_test.name%TYPE)
IS
v_len number;
v_mime_type tb_upload.mime_type%TYPE;
v_offset integer := 1;
v_Buf_size integer := 32767;
v_buf raw(32767);
v_blob blob;
v_Doc_name varchar2(1000);
BEGIN
v_doc_name := url_Decode(p_name);
select mime_type,doc_size,blob_content
into v_mime_Type,v_len,v_blob
from tb_upload
where name = v_doc_name;
OWA_UTIL.MIME_HEADER(v_Mime_Type);
begin
LOOP
DBMS_LOB.READ(v_blob,v_buf_size,v_offset,v_buf);
HTP.PRN(UTL_RAW.CAST_TO_VARCHAR2(v_buf));
v_offset := v_offset + v_buf_size;
END LOOP;
exception
when no_data_found then
null;
end;
END;
HTH
detlev

Problems while uploading text documents into Database

I just upgraded our database from 9iR1 to 9iR2 (9.2.0.1.0). The server
character set is AL32UTF8. Now I'm facing a problem when
uploading text documents into the database via a web frontend.
I use the upload table defined for the PL/SQL Database Access Descriptor:
create table TB_UPLOAD (
NAME VARCHAR2(256) not null,
MIME_TYPE VARCHAR2(128),
DOC_SIZE NUMBER,
DAD_CHARSET VARCHAR2(128),
LAST_UPDATED DATE,
CONTENT_TYPE VARCHAR2(128),
BLOB_CONTENT BLOB);
After uploading a text document containing the two words "hallo welt",
the following statement returns not "hallo welt", but "68616C6C6F2077656C74":
declare
b_loc blob;
v_amount integer := 100;
v_buffer varchar2(100);
v_offset integer := 1;
begin
select blob_content into b_loc from tb_upload where name like 'mydoc.txt';
dbms_lob.read(b_loc, v_amount, v_offset, v_buffer);
htp.prn(v_buffer);
end;
What is this? I studied the documentation, but didn't found a solution.
When trying to use Oracle's built-in procedure wpg_docload.download_file,
the content is shown the way it should be. Unfortunately, I can't use
wpg_docload.download_file in order to copy the BLOB content to another table.
Any hints would be appreciated!
Thanks so much in advance!
Roman
E-Mail: [email protected]

Hi Roman,
the upload uses a BLOB (Binary Lob). Your Document is
stored as is in the binary representation. If you
use dbms_lob.read on a blob and your buffer is a varchar2 the binary representation is not translated!!!
use a raw for the buffer and utl_raw.cast_to_varchar2
to do the conversion to varchar.
try this
Procedure SHOW_DOC(p_name doc_test.name%TYPE)
IS
v_len number;
v_mime_type tb_upload.mime_type%TYPE;
v_offset integer := 1;
v_Buf_size integer := 32767;
v_buf raw(32767);
v_blob blob;
v_Doc_name varchar2(1000);
BEGIN
v_doc_name := url_Decode(p_name);
select mime_type,doc_size,blob_content
into v_mime_Type,v_len,v_blob
from tb_upload
where name = v_doc_name;
OWA_UTIL.MIME_HEADER(v_Mime_Type);
begin
LOOP
DBMS_LOB.READ(v_blob,v_buf_size,v_offset,v_buf);
HTP.PRN(UTL_RAW.CAST_TO_VARCHAR2(v_buf));
v_offset := v_offset + v_buf_size;
END LOOP;
exception
when no_data_found then
null;
end;
END;
HTH
detlev

Problem while changing the width of the Indesign document through inx.

Hi Guys,
I am facing a problem related to the width of InDesign documents. Description of the problem is as follows:-
I have created an InDesign document with height = 700 and width = 500 and export this as an inx file (lets say Doc1.inx).
As "Doc1.inx" is just an xml file I have made certain changes to the height and width fields of the dcoument in it. (Height =900 and Width = 600)
For Height changes are made under following tags :- <docu>
                                                                               <docp>
                                                                                 phgt = "U_900" ;
For Width changes are made under tags :- <docu>
                                                                <docp>
                                                                  pwdt = "U_600";
Now when I opened the modified "Doc1.inx" file with InDesign the modifications for height are correctly reflected, but the width of the column doesn't gets changed. Please open the attachments to see the difference.
Attachment contains the snap shots of documents created at step 1(Initial_Doc1.indd) and step 3(Modified_Doc1.indd).
What should be the modifications we have to do in inx file to reflect the correct modified width of the document. Also is there any document or article which gives the correct understanding of the tags used in inx files.
Any help will be appreciable.

I'm having troubles getting any sensible values at all using CS -- on the other hand, you forgot to mention your version, so I figgered I could try.
(Just as an example, setting width & height to 600 pt and 900 pt -- you don't mention your units of measure either, is it meters? inches? -- I get "phgt="u_408c2000~0" pwdt="u_4082c000~0"", which doesn't make sense. Cicero's!? [*])
But further below, I can see some definitions for columns: count (colc="l_1") and some measurements in that same system, which I suspect to be the width and height you are looking for. You switch between describing you succesfully changed the width and height of the document, and complaining the column does not change. Apparently, the column width is defined in itself, rather than using the "document marges" you are used to in the interface itself.
[*] On second look, I can see more hexadecimal digits in other 'numbers'. It must be hexadecimally encoded IEEE floating point numbers -- "408c2000" decodes to 4.378906, and 4082c000 to 4.085938 -- both valid floating point numbers, but still I wouldn't know in what system.
I hope your version uses regular decimal notation!

Problem while uploading Parallel Unit of measure in MM02 through LSMW

Similar Messages

Maybe you are looking for