Problem while using camera connetor and Sony DSC-M1

Dear all
My digital Camera Sony DSC-M1 is able to take pictures and take video into mpeg4 format .
this is the revirew of this camera
http://www.steves-digicams.com/2004_reviews/m1.html
However, I got a problem while using this camera with iPod +Camera connector.
When I plug this camera into camera connector , ipod will transfer all photo from the camera , but do nothing with the video.
I guess that problem is the video file is not inside the "/DCIM" folder
All video file ( *.mp4 ) are all in the folder named " /MP_ROOT/101MNV01/ "
Can anyone help me how to make this sync from camera to ipod automatically both photo and video ?
This problem also bother me while I am using iPhoto to transfer the file when I was home .
pls , help me , thanks a lot

Hi there, I'm having exactly the same problem. Have you found out how to do it?

Similar Messages

Camera Connector and Sony DSC-P200

Are the iPod Camera Connector and the Sony DSC-P200 compatible with eachother?
Moritz

ptp is to go to a printer. i have 3 transfer modes on my minolta and 2 on my sony, they both only work when they are in normal mode.
one quick note. i had a problem when i was transfering pics on one occasion, it just stopped mid-way and then would no longer recognise the camera. i turned both off then back on, nothing. i did the select+menu reset and everything was back to normal.
i am quickly finding that the camera connector is a finnicky piece now that i am looking to find a card reader that it will recognize. i doesn't recognise much. good luck

Facing problem while using apps world and games

Hi ,
i bought blackberry z3 1 week ago, when i want to download apps from blackberry world its show a message that " AN ERROR OCCURED WHILE PROCESSING YOUR REQUEST "
AND OTHER PROBLEM WHILE GOING TO GAMES APPS IT SHOWS THAT "AN ERROR OCCURED.PLEASE TRY AGAIN LATER( SC_HTTP_server_ERROR).
PLS HELP ME AS SOON AS POSSIBLE.
THANK YOU

Hi and Welcome to the Community!
First:
http://kathrynvercillo.hubpages.com/hub/What-People-Think-When-You-Type-in-All-Caps
Now, please try this process.
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to pop up
2) Reboot
Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt a harsher method by holding down the up/down volume keys together until the device has fully shut down.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

AUDIO PROBLEM WHILE USING OR ALONG WITH WEBCAM

Hi friends,
SUBJECT : AUDIO PROBLEM WHILE USING OR ALONG WITH WEBCAM
I'm not getting any sound while using web-cam.
I tried recording my voice , and played.. i can see my video but audio
Do we have any settings where i need to cross-check to make sure that everything being turned-on ?
My laptop details:-
HP Pavilion dv6 laptop
Operating system Installed - Windows 7
Can someone help me with this?
Thanks
kiran

Hi,
not sure if coincidence or the same question, but the same question got asked internally. The seeded option is required to get the OJSP filter installed. Here's the internal response
ADF View integration with MDS not configured
In web.xml, you need to have mds-ojsp intg enabled to load jspx base + customizations from MDS. In your web project in Jdev, go to ADFv project properties and select “Seeded customization” property. It would enable mds-jsp engine configuration in web.xml. If you want to use user personalization feature at runtime, you would need to select “User customization” property as well which would enable ADFv change persistence config in web.xml.
Warning: Some of the metadata under ... is packaged as part of both WAR and MAR. This metadata cannot be accessed from WAR using MDS.
For these two packages, you are including the files in both WAR & MAR. This warning conveys that since these base files are being put in MAR, at runtime they would be read from mds repository & not from WAR.
Frank

I am having problem while using ms word with anjal( OS X Lion 10.7.5 (11G63))

i am having problem while using ms word with anjal is not working properly but its working in facebook and other areas.i need and its very important to using tamil fonts for my job.can anyone help me out from this problem.
thanking you
by
moses

Those who are knowledgable in this area (myself not among them) say that Word's support for Asian languages is faulty. The best word processor for that use is "Mellel."

Problem while using trigger from line of 6534

I have faced some problems while using triggering with 6534. They are listed below. Please provide solution me.
1. ) i was using pattern input with triggering(buffered) in which i am using the example given in library buffered pattern input-triggered.vi
Now i am using port 0 to take input. From line 0 of port 2 i want to generate a pulse which can trigger the operation & start acquisition. For that i am using write to single line.vi . My DPULL is open so bydefault the line will be at low level & by vi i will make it high which will trigger the operation.
In normal condition if we use write to a single line.vi it will write the given status on that line within a fraction of second and abort execution. But when i am usin
g it for trigger in following manner, it did not work.
First i started the VI buffered pattern input-triggered.vi.I have configured the start trigger with leading edge trigger. I have set the time limit properly.Synchronous operation is set at the front panel of vi.
Now if start the write to a single line.vi to give start trigger, nether it triggered the operation,nor it abort execution of single line write vi.When time out occured in triggered vi, then both vis stopped simultaneously. Why this happened?
2.) Similar problem i faced when i wanted to perform the change detection.vi Port 0 is configured for input.Line 1 to 7 are fixed with some status by connecting them to Vcc or GND. I have connected port 0 line 0 with port 2 line 0. So when i change status of line 0 of port 2 change detection should be occured o port 0. i am changing the status of line 0 of port 2 by write to a single line.vi But here i faced same problem as first that it was not writing to port 0 line 0. And bo
th process stopped when time limit occured in change detection vi.
So what can be the problem? Please help me.

Hi Vishal,
1) You should check to see that when you are writting a static 1 to line 0 you see a pulse high. You should also make sure that you wire this line to the STARTTRIG for group 0.
2) If you solve question 1 you will also have question 2 solved.
It might be helpful to create a program that configures both programs (pattern I/O on port 0 and static I/O on port 2) in the same program and then starts both groups. I would do a little testing to see exactly what signals you do or do not see.
Ron

Problem while using receive after invoke activity

Hi,i have got a problem while using a receive activity,after a invoke activity.The invoke acivity seems that does not work and also the debugger runs forever....But if i remove the receive activity,the invoke activity works fine.
<h2>The output of GlassfishV2 is:<h2>
This is from the exception block.
com.sun.bpel.model.meta.impl.RInvokeImpl@f590c6={<?xml version="1.0" encoding="utf-8" ?>
*<invoke name="Invoke1"*
partnerLink="PartnerLink2"
portType="tns:test_service3"
operation="luizao"
inputVariable="LuizaoIn"
outputVariable="LuizaoOut"
xmlns:tns="http://dim.test.org/"></invoke>}
*[Fatal Error] :1:1: Content is not allowed in prolog.*
System exception occured while executing a business process instance.
java.lang.NullPointerException: WSDL message model is null
at com.sun.jbi.engine.bpel.core.bpel.debug.WSDLMessageImpl.<init>(WSDLMessageImpl.java:56)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.CallFrame.onFault(CallFrame.java:380)
at com.sun.jbi.engine.bpel.core.bpel.model.runtime.impl.SyntheticThrowUnitImpl.doAction(SyntheticThrowUnitImpl.java:91)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELInterpreter.execute(BPELInterpreter.java:145)
at com.sun.jbi.engine.bpel.core.bpel.engine.BusinessProcessInstanceThread.execute(BusinessProcessInstanceThread.java:76)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELProcessManagerImpl.process(BPELProcessManagerImpl.java:818)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:261)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:742)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.processRequest(BPELSEInOutThread.java:401)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.processMsgEx(BPELSEInOutThread.java:240)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.run(BPELSEInOutThread.java:158)
This is from the exception block.
I think correlation sets are ok(i have two receive activities).
I use Netbeans6.0 IDE.
Can anyone help me?
Sorry,but i don't speak English fluently

I can't debug it more,because the bpel variables window disappears when the proccess comes to invoke activity.
The bpel code is simple:I have got a sequence with follow activities:
receive
assign
invoke
receive
assign
reply
The code is:
<?xml version="1.0" encoding="UTF-8"?>
<process
    name="Testfile2"
    targetNamespace="http://enterprise.netbeans.org/bpel/Test2/Testfile2"
    xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:tns="http://enterprise.netbeans.org/bpel/Test2/Testfile2" xmlns:ns0="http://xml.netbeans.org/schema/Testfile2" xmlns:ns1="http://j2ee.netbeans.org/wsdl/Testfile2">
   <import namespace="http://j2ee.netbeans.org/wsdl/Testfile2" location="Testfile2.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <import namespace="http://enterprise.netbeans.org/bpel/test_service3Wrapper" location="Partners/test_service3/test_service3Wrapper.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <import namespace="http://dim.test.org/" location="Partners/test_service3/test_service3.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <import namespace="http://enterprise.netbeans.org/bpel/test_service2Wrapper" location="Partners/test_service2/test_service2Wrapper.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <import namespace="http://dim.test.org/" location="Partners/test_service2/test_service2.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <partnerLinks>
      <partnerLink name="PartnerLink3" xmlns:tns="http://enterprise.netbeans.org/bpel/test_service2Wrapper" partnerLinkType="tns:test_service2LinkType" myRole="test_service2Role"/>
      <partnerLink name="PartnerLink2" xmlns:tns="http://enterprise.netbeans.org/bpel/test_service3Wrapper" partnerLinkType="tns:test_service3LinkType" partnerRole="test_service3Role"/>
      <partnerLink name="PartnerLink1" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" partnerLinkType="tns:Testfile21" myRole="Testfile2PortTypeRole"/>
   </partnerLinks>
   <variables>
      <variable name="Testfile2OperationOut" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" messageType="tns:Testfile2OperationReply"/>
      <variable name="Operation1In" xmlns:tns="http://dim.test.org/" messageType="tns:operation1"/>
      <variable name="LuizaoOut" xmlns:tns="http://dim.test.org/" messageType="tns:luizaoResponse"/>
      <variable name="LuizaoIn" xmlns:tns="http://dim.test.org/" messageType="tns:luizao"/>
      <variable name="Testfile2OperationIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" messageType="tns:Testfile2OperationRequest"/>
   </variables>
   <correlationSets>
      <correlationSet name="CorrelationSet1" properties="ns1:My_Property"/>
   </correlationSets>
   <sequence>
      <receive name="Receive1" createInstance="yes" partnerLink="PartnerLink1" operation="Testfile2Operation" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" portType="tns:Testfile2PortType" variable="Testfile2OperationIn">
         <correlations>
            <correlation set="CorrelationSet1" initiate="yes"/>
         </correlations>
      </receive>
      <assign name="Assign1">
         <copy>
            <from>$Testfile2OperationIn.part1/ns0:ena</from>
            <to>$LuizaoIn.parameters/ena</to>
         </copy>
         <copy>
            <from>$Testfile2OperationIn.part1/ns0:id</from>
            <to>$LuizaoIn.parameters/id</to>
         </copy>
      </assign>
      <invoke name="Invoke1" partnerLink="PartnerLink2" operation="luizao" xmlns:tns="http://dim.test.org/" portType="tns:test_service3" inputVariable="LuizaoIn" outputVariable="LuizaoOut"/>
      <receive name="Receive2" createInstance="no" partnerLink="PartnerLink3" operation="operation1" xmlns:tns="http://dim.test.org/" portType="tns:test_service2" variable="Operation1In">
         <correlations>
            <correlation set="CorrelationSet1" initiate="no"/>
         </correlations>
      </receive>
      <assign name="Assign2">
         <copy>
            <from>$Operation1In.parameters/hik</from>
            <to>$Testfile2OperationOut.part1/ns0:hik</to>
         </copy>
      </assign>
      <reply name="Reply1" partnerLink="PartnerLink1" operation="Testfile2Operation" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" portType="tns:Testfile2PortType" variable="Testfile2OperationOut"/>
   </sequence>
</process>If it's a bug,that means that i can't use second receive after invoke any more?

Problem while using h:selectOneMenu tag

Hello All,
I am facing a problem while using the <h:selectOneMenu in my JSP.
My requirement is as below,
I am having a list of manager in the select box.
User will select any of the manager and click a command link to assign the manager.
On click of this command link backerbean method should be invoked.
My problem is,
I am able to display the list box without any problem.
But Once I select any value from the list box the command link is not working.
That is click on the command link is not invoking the backer bean method.
My code look as below,
JSP
<td>
<h:selectOneMenu value="#pc_EmployeeDetailsView.assignedMgrPositionId}" id="assignedMgrPositionId" style="width: 170px">
<f:selectItems value="#{pc_EmployeeDetailsView.managerList}" />
</h:selectOneMenu>
</td><td>�</td>
<td><h:commandLink action="#pc_EmployeeDetailsView.assignManager}" onmousedown="setEditAction('assign');">
<h:outputText value="Assign"></h:outputText>
</h:commandLink></td>Backer Bean
     SelectItem managerSelectItem = new SelectItem("0","Select Manager");
     ArrayList managerSelectItemList = new ArrayList();
     managerSelectItemList.add(managerSelectItem);
     int managerListSize = managerSearchList.size();
     for (int i=0; i<managerListSize; i++) {
          Employee manager = (Employee) managerSearchList.get(i);
          managerSelectItem = new SelectItem(StringUtils.isNotEmpty(manager.getOrgInfo().getPositionNumber())?manager.getOrgInfo().getPositionNumber():"",StringUtils.isNotEmpty(manager.getFullDisplayName())?manager.getFullDisplayName():"");
          managerSelectItemList.add(managerSelectItem);
     setManagerList(managerSelectItemList);Please help me on this.
Thanks In Advance

I have solved this problem by putting the list in portlet session and allowing the get method to get the SelectItem from the session

Lightroom 4 and 5 my program constantly freezes while using the crop and straighten tool

In both Lightroom 4 and 5 my program constantly freezes while using the crop and straighten tool with horizontal images. Im running Lightroom on a Quad-Core Intel Xeon Mac with 32 GB of memory with OS 10.8.4, this problem has gotten worse and worse to the point where the crop tool is unusable. Please help!

Alright,
no replies so far! Anyways, here's some more information which is leading me to the conclusion that the bug causing the effect described above is a combination of Apple's SMB implementation of Mavericks and the way Lightroom is actually using SMB network access:
I did another trial by connecting a USB hard drive to the USB port of my router (Netgear). The connection is quite slow, but moving one of the folders in question (see my 1st post above) to the shared drive connected to the Router made Lightroom on my Windows machine to see the photos again, when I told Lightroom where to find the moved folder!
Everything was working as expected, on the Windows machine again! Moving the folder back again to the Mac Mini fileshare was causing Lightroom on the PC to get blind again for the pictures trying to sync or import. However, accessing and modifying a photo was possible again, like it was before the trial. So it's only the sync and import function having a problem!
I also did some trial in re-building ACLs and access rights on the file server with no luck. So there's got to be a functionality in sync and import of Lightroom which is using a certain SMB feature which is not supported by Apple's SMB implementation!
Any thoughts or hints?
Thanks!

Volume problem while using headphone

when I use my headphone I have no problem while talking on phone but when I try to listen to music or watch you tube I cannot hear the left side. I restored iphone and got replacement but same problem. I changed headphones but that wasent the problem as well. please help!

s. laxnars wrote:
I am facing some problem while using preparedStatement.setNull while using Bea's Orale XA Driver, the same code works fine with oracle XA driver,
Can any one plz help on this.
Here the code
String insertIntoTestRequestQuery = "Insert into A values(?,?,?)";
PreparedStatement dbInsertStatement = connection.prepareStatement(insertIntoTestRequestQuery);
dbInsertStatement.setLong(1, 3L);
dbInsertStatement.setString(2,"test");
dbInsertStatement.setNull(3,java.sql.Types.NULL);
I am using Weblogic 9.2 with Oracle 9i
here the Spy Log
spy>> PreparedStatement[163].setNull(int parameterIndex, int sqlType)
spy>> parameterIndex = 1
spy>> sqlType = 0
spy>> java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver. ErrorCode=0 SQLState=HY004
java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver.
     at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
     at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.validateSqlType(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.setObjectInternal(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.setNull(Unknown Source)
     at weblogic.jdbcx.base.BasePreparedStatementWrapper.setNull(Unknown Source)
     at weblogic.jdbcspy.SpyPreparedStatement.setNull(Unknown Source)
     at weblogic.jdbc.wrapper.PreparedStatement.setNull(PreparedStatement.java:491)Hi. This is a known issue. Call official BEA support and open a case
so you will be notified when a new driver will have the fix. In the
meantime, if you set the Type to correspond to the DBMS's column type,
it will work. In fact, I'll bet that if you just set the Type to VARCHAR
it will work, regardless of the actual column type...
Joe

Problem while using BEA's Oracle Driver

I am facing some problem while using preparedStatement.setNull while using Bea's Orale XA Driver, the same code works fine with oracle XA driver,
Can any one plz help on this.
Here the code
String insertIntoTestRequestQuery = "Insert into A values(?,?,?)";
PreparedStatement dbInsertStatement = connection.prepareStatement(insertIntoTestRequestQuery);
dbInsertStatement.setLong(1, 3L);
dbInsertStatement.setString(2,"test");
dbInsertStatement.setNull(3,java.sql.Types.NULL);
I am using Weblogic 9.2 with Oracle 9i
here the Spy Log
spy>> PreparedStatement[163].setNull(int parameterIndex, int sqlType)
spy>> parameterIndex = 1
spy>> sqlType = 0
spy>> java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver. ErrorCode=0 SQLState=HY004
java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver.
     at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
     at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.validateSqlType(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.setObjectInternal(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.setNull(Unknown Source)
     at weblogic.jdbcx.base.BasePreparedStatementWrapper.setNull(Unknown Source)
     at weblogic.jdbcspy.SpyPreparedStatement.setNull(Unknown Source)
     at weblogic.jdbc.wrapper.PreparedStatement.setNull(PreparedStatement.java:491)

s. laxnars wrote:
I am facing some problem while using preparedStatement.setNull while using Bea's Orale XA Driver, the same code works fine with oracle XA driver,
Can any one plz help on this.
Here the code
String insertIntoTestRequestQuery = "Insert into A values(?,?,?)";
PreparedStatement dbInsertStatement = connection.prepareStatement(insertIntoTestRequestQuery);
dbInsertStatement.setLong(1, 3L);
dbInsertStatement.setString(2,"test");
dbInsertStatement.setNull(3,java.sql.Types.NULL);
I am using Weblogic 9.2 with Oracle 9i
here the Spy Log
spy>> PreparedStatement[163].setNull(int parameterIndex, int sqlType)
spy>> parameterIndex = 1
spy>> sqlType = 0
spy>> java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver. ErrorCode=0 SQLState=HY004
java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver.
     at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
     at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.validateSqlType(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.setObjectInternal(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.setNull(Unknown Source)
     at weblogic.jdbcx.base.BasePreparedStatementWrapper.setNull(Unknown Source)
     at weblogic.jdbcspy.SpyPreparedStatement.setNull(Unknown Source)
     at weblogic.jdbc.wrapper.PreparedStatement.setNull(PreparedStatement.java:491)Hi. This is a known issue. Call official BEA support and open a case
so you will be notified when a new driver will have the fix. In the
meantime, if you set the Type to correspond to the DBMS's column type,
it will work. In fact, I'll bet that if you just set the Type to VARCHAR
it will work, regardless of the actual column type...
Joe

Problem while using netscape.ldap.util.ConnectionPool

Hi,
We have a problem while using netscape's netscape.ldap.util.ConnectionPool class.
( iPlanet 5.1
ldap sdk 4.0 )
First we obtain a connection from the ConnectionPool class by using the constructor as below
//create pool
pool = new ConnectionPool(10, 50, "localhost", 389, "cn=Directory Manager", "password");
//get conn from pool
conn = pool.getConnection();
After doing some ldap read only operations if we disconnect using
//disconnect
conn.disconnect();
the junit test cases whihc use the above code
take sometime to execute fully
Sometimes there's no response also.
Also just the disconnection alone takes quite some time(~1000 ms)..
If the conn.disconnect() is not used then its pretty fast.
Could anybody throw more light on this issue
Thanx

I think i found the problem..correct me if i'm wrong
I tried using
pool.close( conn );
and the time taken now is almost negligible
If you can give suggestions I would be only glad

Problem while using struts 1.3.8

Hi All,
I have some problem while using struts 1.3.8 in my application.
I am using OC4J 10.1.2.0.2, my simple coding is follows:
<%@ page contentType="text/html;charset=utf-8"%>
<%@ taglib uri="/WEB-INF/tlds/struts-tiles.tld" prefix="tiles"%>
<%@ taglib uri="/WEB-INF/tlds/struts-bean.tld" prefix="bean"%>
<%@ taglib uri="/WEB-INF/tlds/struts-html.tld" prefix="html"%>
<%@ taglib uri="/WEB-INF/tlds/struts-logic.tld" prefix="logic"%>
<html:xhtml />
<html:form action="<action page>" method="POST" enctype="multipart/form-data" >
<p>
     <label for="Subject" ><span class="Mandatory">*</span> Subject:</label>
     <html:text size="40" property="subject" />
</p>
<p>
     <label for="upload" >Attachment:</label>
     <html:file size="40" property="attachmentFile" />
</p>
<p>
         <html:submit />
</p>after clicking my the submit button in the server console i m getting
JAAS-OC4J: JAZNFilter.doFilter - unable to find the current servlet
javax.servlet.ServletException: JAAS-OC4J: JAZNFilter.doFilter - unable to find the current servlet
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222)
at org.apache.struts.tiles.commands.TilesPreProcessor.doForward(TilesPreProcessor.java:260)
at org.apache.struts.tiles.commands.TilesPreProcessor.execute(TilesPreProcessor.java:217)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:462)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at com.ed.ecomm.edcore.web.filters.SecurityFilter.doFilter(SecurityFilter.java:196)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at com.ed.ecomm.edcore.web.filters.MonitoringFilter.doFilter(MonitoringFilter.java:138)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at com.ed.ecomm.edcore.web.filters.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:92)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
further i investigate and i removed the "enctype=multipart/form-data" from the form attribute its working fine..
but without using this attribute struts doesn't support the "upload" i.e, form file... its throwing another exeception..
could you anyone please let me know whether i can change my OC4J server version of anything need to do..
many thanks in advance

I'm having the same exact problem. Any ideas?
Schema sfactory;
Schema schema;
sfactory = SchemaFactory.newInstance(XMLConstants.W3C_XML_SCHEMA_NS_URI);
ErrorHandler eHandler = new MyErrorHandler();
sfactory.setErrorHandler(eHandler);
LSResourceResolver lsrResolver = new MyLSResourceResolver();
sfactory.setResourceResolver(lsrResolver);
schema = sfactory.newSchema(new File(argv[1]));The last line gives me NullPointerException. I know the file (argv[1]) exists and can be read because I can print it with a BufferedReader.

Assertion problem while using C++ 5.0 compiler

Hi,
we are using C++ compiler 5.0 on sparc solaris 2.6 machine.
when we tried to build the debug version of a particular exe with -g
option , we are getting the following error message
Assertion : ( ../links/dgb_cstabs.cc line 1516)
while compiling a .cc file.
without the -g option ,the file compiles successfully.
so please throw some light on this problem and help us to getout of
this problem.
regards
tunga

Assertion problem while using C++ 5.0 compiler on solaris 2.6

Assertion problem while using C++ 5.0 compiler on Solaris 2.6

Hi,
we are using C++ compiler 5.0 on sparc solaris 2.6 machine.
when we tried to build the debug version of a particular exe with -g
option , we are getting the following error message
Assertion : ( ../links/dgb_cstabs.cc line 1516)
while compiling a .cc file.
Compiler options we used is
/opt/SUNWspro/bin/CC -c -compat=4 -g -KPIC -w -features=namespace,no%except,bool,mutable -verbose=template -DOS_USE_SHORT_NAMES -DINCLUDEALL +d -DRWSTD_MULTI_THREAD -D_REENTRANT -D_THREAD_SAFE -D_POSIX_C_SOURCE=199506L -DOS_NEW_CHECK -DOS_STL_ASSERT -DOS_NO_WSTRING -DOS_ALTERNATIVE_STL_NAMES -DRWSTD_NO_CONST_INST -DNO_ALLOCATOR_STL -DOS_OMIT_BOOL -DEXE_HANDLING -DNO_CPLM -DALO_ON -DSUBPROC_ON -DCANCEL_ON -D__EXTENSIONS__ -DEXPLICIT_OPERATOR_INVOKE -DSTL_SUPPORT_OPERATOR -DSUNSOLARIS -DWHAT_TIME_DATE="\"Build Date Time Not Set\"" -I/opt/orbplus/include -I/opt/orbplus/include/naming -I/opt/SUNWspro/SC5.0/include/CC4 -I/opt/SUNWspro/SC5.0/include/CC -I/usr/include/reentrant -I../.. -I../../include -I../inc -I. -I/opt/odbc/include -I/oracle/home/oracle/include -I/oracle/home/oracle/rdbms/demo pdl.tab.c -o ../../bin/hpux/obj/pdl.tab.o
without the -g option ,the file compiles successfully.
so please throw some light on this problem and help us to getout of
this problem.
regards
tunga

Assertion problem while using C++ 5.0 compiler on solaris 2.6

Problem while using camera connetor and Sony DSC-M1

Similar Messages

Maybe you are looking for