Problem while using dynamic geo characteristic on a map

Dear all,
I'm not able to display dynamic geo characteristics on a map though I am able to display static geo chars on a map. I have done the following:
- Define the characteristic as dynamic geo characteristic.
- Download the Geo data from the char on my local system.
- Edit the data and enter the value in the fields X & Y (For latitude and longitue).
- Save the file as csv and load the master data attr file back to the system along with the value of latitude and longitue.
- Create a query and add keep only this char in a rows.
- Use this query as a data provider for a map web item in WAD.
After doing this I get 'Map can not be displayed' error when I execute this web template. Is there some step I have missed here? There's no problem with the IGS because I'm able to display the queries with static geo characteristics on a map using WAD.
Another query I have is which shape file will be used and displayed as a map in the web template in case of dynamic geo chars (I'm confused because dynamic geo chars do not allow shape files to be loaded unlike the static geo chars). I'll be grateful for any suggestions on this. Thanks in advance.
Regards,
Sumit

Just follow instructions for query design for class 2 renderers (symbol, bar chart, pie chart for dynamic geo-characteristics).
"For these renderers, the dynamic geo characteristic must appear in the related data provider in the rows. You must have also selected the Longitude and Latitude display attributes to be displayed. No other characteristics or key figures must appear in the rows. Only the first column is considered by the symbol renderers. The renderers bar chart, pie chart, and pie chart (split) consider all columns."
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
In my case it helped

Similar Messages

I am having problem while using ms word with anjal( OS X Lion 10.7.5 (11G63))

i am having problem while using ms word with anjal is not working properly but its working in facebook and other areas.i need and its very important to using tamil fonts for my job.can anyone help me out from this problem.
thanking you
by
moses

Those who are knowledgable in this area (myself not among them) say that Word's support for Asian languages is faulty. The best word processor for that use is "Mellel."

Problem while using trigger from line of 6534

I have faced some problems while using triggering with 6534. They are listed below. Please provide solution me.
1. ) i was using pattern input with triggering(buffered) in which i am using the example given in library buffered pattern input-triggered.vi
Now i am using port 0 to take input. From line 0 of port 2 i want to generate a pulse which can trigger the operation & start acquisition. For that i am using write to single line.vi . My DPULL is open so bydefault the line will be at low level & by vi i will make it high which will trigger the operation.
In normal condition if we use write to a single line.vi it will write the given status on that line within a fraction of second and abort execution. But when i am usin
g it for trigger in following manner, it did not work.
First i started the VI buffered pattern input-triggered.vi.I have configured the start trigger with leading edge trigger. I have set the time limit properly.Synchronous operation is set at the front panel of vi.
Now if start the write to a single line.vi to give start trigger, nether it triggered the operation,nor it abort execution of single line write vi.When time out occured in triggered vi, then both vis stopped simultaneously. Why this happened?
2.) Similar problem i faced when i wanted to perform the change detection.vi Port 0 is configured for input.Line 1 to 7 are fixed with some status by connecting them to Vcc or GND. I have connected port 0 line 0 with port 2 line 0. So when i change status of line 0 of port 2 change detection should be occured o port 0. i am changing the status of line 0 of port 2 by write to a single line.vi But here i faced same problem as first that it was not writing to port 0 line 0. And bo
th process stopped when time limit occured in change detection vi.
So what can be the problem? Please help me.

Hi Vishal,
1) You should check to see that when you are writting a static 1 to line 0 you see a pulse high. You should also make sure that you wire this line to the STARTTRIG for group 0.
2) If you solve question 1 you will also have question 2 solved.
It might be helpful to create a program that configures both programs (pattern I/O on port 0 and static I/O on port 2) in the same program and then starts both groups. I would do a little testing to see exactly what signals you do or do not see.
Ron

Problem while using receive after invoke activity

Hi,i have got a problem while using a receive activity,after a invoke activity.The invoke acivity seems that does not work and also the debugger runs forever....But if i remove the receive activity,the invoke activity works fine.
<h2>The output of GlassfishV2 is:<h2>
This is from the exception block.
com.sun.bpel.model.meta.impl.RInvokeImpl@f590c6={<?xml version="1.0" encoding="utf-8" ?>
*<invoke name="Invoke1"*
partnerLink="PartnerLink2"
portType="tns:test_service3"
operation="luizao"
inputVariable="LuizaoIn"
outputVariable="LuizaoOut"
xmlns:tns="http://dim.test.org/"></invoke>}
*[Fatal Error] :1:1: Content is not allowed in prolog.*
System exception occured while executing a business process instance.
java.lang.NullPointerException: WSDL message model is null
at com.sun.jbi.engine.bpel.core.bpel.debug.WSDLMessageImpl.<init>(WSDLMessageImpl.java:56)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.CallFrame.onFault(CallFrame.java:380)
at com.sun.jbi.engine.bpel.core.bpel.model.runtime.impl.SyntheticThrowUnitImpl.doAction(SyntheticThrowUnitImpl.java:91)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELInterpreter.execute(BPELInterpreter.java:145)
at com.sun.jbi.engine.bpel.core.bpel.engine.BusinessProcessInstanceThread.execute(BusinessProcessInstanceThread.java:76)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELProcessManagerImpl.process(BPELProcessManagerImpl.java:818)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:261)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:742)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.processRequest(BPELSEInOutThread.java:401)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.processMsgEx(BPELSEInOutThread.java:240)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.run(BPELSEInOutThread.java:158)
This is from the exception block.
I think correlation sets are ok(i have two receive activities).
I use Netbeans6.0 IDE.
Can anyone help me?
Sorry,but i don't speak English fluently

I can't debug it more,because the bpel variables window disappears when the proccess comes to invoke activity.
The bpel code is simple:I have got a sequence with follow activities:
receive
assign
invoke
receive
assign
reply
The code is:
<?xml version="1.0" encoding="UTF-8"?>
<process
    name="Testfile2"
    targetNamespace="http://enterprise.netbeans.org/bpel/Test2/Testfile2"
    xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:tns="http://enterprise.netbeans.org/bpel/Test2/Testfile2" xmlns:ns0="http://xml.netbeans.org/schema/Testfile2" xmlns:ns1="http://j2ee.netbeans.org/wsdl/Testfile2">
   <import namespace="http://j2ee.netbeans.org/wsdl/Testfile2" location="Testfile2.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <import namespace="http://enterprise.netbeans.org/bpel/test_service3Wrapper" location="Partners/test_service3/test_service3Wrapper.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <import namespace="http://dim.test.org/" location="Partners/test_service3/test_service3.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <import namespace="http://enterprise.netbeans.org/bpel/test_service2Wrapper" location="Partners/test_service2/test_service2Wrapper.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <import namespace="http://dim.test.org/" location="Partners/test_service2/test_service2.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <partnerLinks>
      <partnerLink name="PartnerLink3" xmlns:tns="http://enterprise.netbeans.org/bpel/test_service2Wrapper" partnerLinkType="tns:test_service2LinkType" myRole="test_service2Role"/>
      <partnerLink name="PartnerLink2" xmlns:tns="http://enterprise.netbeans.org/bpel/test_service3Wrapper" partnerLinkType="tns:test_service3LinkType" partnerRole="test_service3Role"/>
      <partnerLink name="PartnerLink1" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" partnerLinkType="tns:Testfile21" myRole="Testfile2PortTypeRole"/>
   </partnerLinks>
   <variables>
      <variable name="Testfile2OperationOut" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" messageType="tns:Testfile2OperationReply"/>
      <variable name="Operation1In" xmlns:tns="http://dim.test.org/" messageType="tns:operation1"/>
      <variable name="LuizaoOut" xmlns:tns="http://dim.test.org/" messageType="tns:luizaoResponse"/>
      <variable name="LuizaoIn" xmlns:tns="http://dim.test.org/" messageType="tns:luizao"/>
      <variable name="Testfile2OperationIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" messageType="tns:Testfile2OperationRequest"/>
   </variables>
   <correlationSets>
      <correlationSet name="CorrelationSet1" properties="ns1:My_Property"/>
   </correlationSets>
   <sequence>
      <receive name="Receive1" createInstance="yes" partnerLink="PartnerLink1" operation="Testfile2Operation" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" portType="tns:Testfile2PortType" variable="Testfile2OperationIn">
         <correlations>
            <correlation set="CorrelationSet1" initiate="yes"/>
         </correlations>
      </receive>
      <assign name="Assign1">
         <copy>
            <from>$Testfile2OperationIn.part1/ns0:ena</from>
            <to>$LuizaoIn.parameters/ena</to>
         </copy>
         <copy>
            <from>$Testfile2OperationIn.part1/ns0:id</from>
            <to>$LuizaoIn.parameters/id</to>
         </copy>
      </assign>
      <invoke name="Invoke1" partnerLink="PartnerLink2" operation="luizao" xmlns:tns="http://dim.test.org/" portType="tns:test_service3" inputVariable="LuizaoIn" outputVariable="LuizaoOut"/>
      <receive name="Receive2" createInstance="no" partnerLink="PartnerLink3" operation="operation1" xmlns:tns="http://dim.test.org/" portType="tns:test_service2" variable="Operation1In">
         <correlations>
            <correlation set="CorrelationSet1" initiate="no"/>
         </correlations>
      </receive>
      <assign name="Assign2">
         <copy>
            <from>$Operation1In.parameters/hik</from>
            <to>$Testfile2OperationOut.part1/ns0:hik</to>
         </copy>
      </assign>
      <reply name="Reply1" partnerLink="PartnerLink1" operation="Testfile2Operation" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" portType="tns:Testfile2PortType" variable="Testfile2OperationOut"/>
   </sequence>
</process>If it's a bug,that means that i can't use second receive after invoke any more?

Problem while using h:selectOneMenu tag

Hello All,
I am facing a problem while using the <h:selectOneMenu in my JSP.
My requirement is as below,
I am having a list of manager in the select box.
User will select any of the manager and click a command link to assign the manager.
On click of this command link backerbean method should be invoked.
My problem is,
I am able to display the list box without any problem.
But Once I select any value from the list box the command link is not working.
That is click on the command link is not invoking the backer bean method.
My code look as below,
JSP
<td>
<h:selectOneMenu value="#pc_EmployeeDetailsView.assignedMgrPositionId}" id="assignedMgrPositionId" style="width: 170px">
<f:selectItems value="#{pc_EmployeeDetailsView.managerList}" />
</h:selectOneMenu>
</td><td>�</td>
<td><h:commandLink action="#pc_EmployeeDetailsView.assignManager}" onmousedown="setEditAction('assign');">
<h:outputText value="Assign"></h:outputText>
</h:commandLink></td>Backer Bean
     SelectItem managerSelectItem = new SelectItem("0","Select Manager");
     ArrayList managerSelectItemList = new ArrayList();
     managerSelectItemList.add(managerSelectItem);
     int managerListSize = managerSearchList.size();
     for (int i=0; i<managerListSize; i++) {
          Employee manager = (Employee) managerSearchList.get(i);
          managerSelectItem = new SelectItem(StringUtils.isNotEmpty(manager.getOrgInfo().getPositionNumber())?manager.getOrgInfo().getPositionNumber():"",StringUtils.isNotEmpty(manager.getFullDisplayName())?manager.getFullDisplayName():"");
          managerSelectItemList.add(managerSelectItem);
     setManagerList(managerSelectItemList);Please help me on this.
Thanks In Advance

I have solved this problem by putting the list in portlet session and allowing the get method to get the SelectItem from the session

Volume problem while using headphone

when I use my headphone I have no problem while talking on phone but when I try to listen to music or watch you tube I cannot hear the left side. I restored iphone and got replacement but same problem. I changed headphones but that wasent the problem as well. please help!

s. laxnars wrote:
I am facing some problem while using preparedStatement.setNull while using Bea's Orale XA Driver, the same code works fine with oracle XA driver,
Can any one plz help on this.
Here the code
String insertIntoTestRequestQuery = "Insert into A values(?,?,?)";
PreparedStatement dbInsertStatement = connection.prepareStatement(insertIntoTestRequestQuery);
dbInsertStatement.setLong(1, 3L);
dbInsertStatement.setString(2,"test");
dbInsertStatement.setNull(3,java.sql.Types.NULL);
I am using Weblogic 9.2 with Oracle 9i
here the Spy Log
spy>> PreparedStatement[163].setNull(int parameterIndex, int sqlType)
spy>> parameterIndex = 1
spy>> sqlType = 0
spy>> java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver. ErrorCode=0 SQLState=HY004
java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver.
     at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
     at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.validateSqlType(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.setObjectInternal(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.setNull(Unknown Source)
     at weblogic.jdbcx.base.BasePreparedStatementWrapper.setNull(Unknown Source)
     at weblogic.jdbcspy.SpyPreparedStatement.setNull(Unknown Source)
     at weblogic.jdbc.wrapper.PreparedStatement.setNull(PreparedStatement.java:491)Hi. This is a known issue. Call official BEA support and open a case
so you will be notified when a new driver will have the fix. In the
meantime, if you set the Type to correspond to the DBMS's column type,
it will work. In fact, I'll bet that if you just set the Type to VARCHAR
it will work, regardless of the actual column type...
Joe

Problem while using BEA's Oracle Driver

I am facing some problem while using preparedStatement.setNull while using Bea's Orale XA Driver, the same code works fine with oracle XA driver,
Can any one plz help on this.
Here the code
String insertIntoTestRequestQuery = "Insert into A values(?,?,?)";
PreparedStatement dbInsertStatement = connection.prepareStatement(insertIntoTestRequestQuery);
dbInsertStatement.setLong(1, 3L);
dbInsertStatement.setString(2,"test");
dbInsertStatement.setNull(3,java.sql.Types.NULL);
I am using Weblogic 9.2 with Oracle 9i
here the Spy Log
spy>> PreparedStatement[163].setNull(int parameterIndex, int sqlType)
spy>> parameterIndex = 1
spy>> sqlType = 0
spy>> java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver. ErrorCode=0 SQLState=HY004
java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver.
     at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
     at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.validateSqlType(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.setObjectInternal(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.setNull(Unknown Source)
     at weblogic.jdbcx.base.BasePreparedStatementWrapper.setNull(Unknown Source)
     at weblogic.jdbcspy.SpyPreparedStatement.setNull(Unknown Source)
     at weblogic.jdbc.wrapper.PreparedStatement.setNull(PreparedStatement.java:491)

s. laxnars wrote:
I am facing some problem while using preparedStatement.setNull while using Bea's Orale XA Driver, the same code works fine with oracle XA driver,
Can any one plz help on this.
Here the code
String insertIntoTestRequestQuery = "Insert into A values(?,?,?)";
PreparedStatement dbInsertStatement = connection.prepareStatement(insertIntoTestRequestQuery);
dbInsertStatement.setLong(1, 3L);
dbInsertStatement.setString(2,"test");
dbInsertStatement.setNull(3,java.sql.Types.NULL);
I am using Weblogic 9.2 with Oracle 9i
here the Spy Log
spy>> PreparedStatement[163].setNull(int parameterIndex, int sqlType)
spy>> parameterIndex = 1
spy>> sqlType = 0
spy>> java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver. ErrorCode=0 SQLState=HY004
java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver.
     at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
     at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.validateSqlType(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.setObjectInternal(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.setNull(Unknown Source)
     at weblogic.jdbcx.base.BasePreparedStatementWrapper.setNull(Unknown Source)
     at weblogic.jdbcspy.SpyPreparedStatement.setNull(Unknown Source)
     at weblogic.jdbc.wrapper.PreparedStatement.setNull(PreparedStatement.java:491)Hi. This is a known issue. Call official BEA support and open a case
so you will be notified when a new driver will have the fix. In the
meantime, if you set the Type to correspond to the DBMS's column type,
it will work. In fact, I'll bet that if you just set the Type to VARCHAR
it will work, regardless of the actual column type...
Joe

Problem while using netscape.ldap.util.ConnectionPool

Hi,
We have a problem while using netscape's netscape.ldap.util.ConnectionPool class.
( iPlanet 5.1
ldap sdk 4.0 )
First we obtain a connection from the ConnectionPool class by using the constructor as below
//create pool
pool = new ConnectionPool(10, 50, "localhost", 389, "cn=Directory Manager", "password");
//get conn from pool
conn = pool.getConnection();
After doing some ldap read only operations if we disconnect using
//disconnect
conn.disconnect();
the junit test cases whihc use the above code
take sometime to execute fully
Sometimes there's no response also.
Also just the disconnection alone takes quite some time(~1000 ms)..
If the conn.disconnect() is not used then its pretty fast.
Could anybody throw more light on this issue
Thanx

I think i found the problem..correct me if i'm wrong
I tried using
pool.close( conn );
and the time taken now is almost negligible
If you can give suggestions I would be only glad

Problem while using struts 1.3.8

Hi All,
I have some problem while using struts 1.3.8 in my application.
I am using OC4J 10.1.2.0.2, my simple coding is follows:
<%@ page contentType="text/html;charset=utf-8"%>
<%@ taglib uri="/WEB-INF/tlds/struts-tiles.tld" prefix="tiles"%>
<%@ taglib uri="/WEB-INF/tlds/struts-bean.tld" prefix="bean"%>
<%@ taglib uri="/WEB-INF/tlds/struts-html.tld" prefix="html"%>
<%@ taglib uri="/WEB-INF/tlds/struts-logic.tld" prefix="logic"%>
<html:xhtml />
<html:form action="<action page>" method="POST" enctype="multipart/form-data" >
<p>
     <label for="Subject" ><span class="Mandatory">*</span> Subject:</label>
     <html:text size="40" property="subject" />
</p>
<p>
     <label for="upload" >Attachment:</label>
     <html:file size="40" property="attachmentFile" />
</p>
<p>
         <html:submit />
</p>after clicking my the submit button in the server console i m getting
JAAS-OC4J: JAZNFilter.doFilter - unable to find the current servlet
javax.servlet.ServletException: JAAS-OC4J: JAZNFilter.doFilter - unable to find the current servlet
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222)
at org.apache.struts.tiles.commands.TilesPreProcessor.doForward(TilesPreProcessor.java:260)
at org.apache.struts.tiles.commands.TilesPreProcessor.execute(TilesPreProcessor.java:217)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:462)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at com.ed.ecomm.edcore.web.filters.SecurityFilter.doFilter(SecurityFilter.java:196)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at com.ed.ecomm.edcore.web.filters.MonitoringFilter.doFilter(MonitoringFilter.java:138)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at com.ed.ecomm.edcore.web.filters.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:92)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
further i investigate and i removed the "enctype=multipart/form-data" from the form attribute its working fine..
but without using this attribute struts doesn't support the "upload" i.e, form file... its throwing another exeception..
could you anyone please let me know whether i can change my OC4J server version of anything need to do..
many thanks in advance

I'm having the same exact problem. Any ideas?
Schema sfactory;
Schema schema;
sfactory = SchemaFactory.newInstance(XMLConstants.W3C_XML_SCHEMA_NS_URI);
ErrorHandler eHandler = new MyErrorHandler();
sfactory.setErrorHandler(eHandler);
LSResourceResolver lsrResolver = new MyLSResourceResolver();
sfactory.setResourceResolver(lsrResolver);
schema = sfactory.newSchema(new File(argv[1]));The last line gives me NullPointerException. I know the file (argv[1]) exists and can be read because I can print it with a BufferedReader.

Assertion problem while using C++ 5.0 compiler

Hi,
we are using C++ compiler 5.0 on sparc solaris 2.6 machine.
when we tried to build the debug version of a particular exe with -g
option , we are getting the following error message
Assertion : ( ../links/dgb_cstabs.cc line 1516)
while compiling a .cc file.
without the -g option ,the file compiles successfully.
so please throw some light on this problem and help us to getout of
this problem.
regards
tunga

Assertion problem while using C++ 5.0 compiler on solaris 2.6

Assertion problem while using C++ 5.0 compiler on Solaris 2.6

Hi,
we are using C++ compiler 5.0 on sparc solaris 2.6 machine.
when we tried to build the debug version of a particular exe with -g
option , we are getting the following error message
Assertion : ( ../links/dgb_cstabs.cc line 1516)
while compiling a .cc file.
Compiler options we used is
/opt/SUNWspro/bin/CC -c -compat=4 -g -KPIC -w -features=namespace,no%except,bool,mutable -verbose=template -DOS_USE_SHORT_NAMES -DINCLUDEALL +d -DRWSTD_MULTI_THREAD -D_REENTRANT -D_THREAD_SAFE -D_POSIX_C_SOURCE=199506L -DOS_NEW_CHECK -DOS_STL_ASSERT -DOS_NO_WSTRING -DOS_ALTERNATIVE_STL_NAMES -DRWSTD_NO_CONST_INST -DNO_ALLOCATOR_STL -DOS_OMIT_BOOL -DEXE_HANDLING -DNO_CPLM -DALO_ON -DSUBPROC_ON -DCANCEL_ON -D__EXTENSIONS__ -DEXPLICIT_OPERATOR_INVOKE -DSTL_SUPPORT_OPERATOR -DSUNSOLARIS -DWHAT_TIME_DATE="\"Build Date Time Not Set\"" -I/opt/orbplus/include -I/opt/orbplus/include/naming -I/opt/SUNWspro/SC5.0/include/CC4 -I/opt/SUNWspro/SC5.0/include/CC -I/usr/include/reentrant -I../.. -I../../include -I../inc -I. -I/opt/odbc/include -I/oracle/home/oracle/include -I/oracle/home/oracle/rdbms/demo pdl.tab.c -o ../../bin/hpux/obj/pdl.tab.o
without the -g option ,the file compiles successfully.
so please throw some light on this problem and help us to getout of
this problem.
regards
tunga

Assertion problem while using C++ 5.0 compiler on solaris 2.6

Problem While using Applet Reqd classes using Weblogic 5.1

Hi All,
Here is my problem while using other classes from the Applet gives an error:NoClassDefFound,
I have also put the applet reqd. classes in a jar file and placed this jar along with the applet
in weblogic/myserver/serverclases,
my tag in the html file is as follows:
<applet code="MyApplet.class" archive="voucher.jar"
codebase="/classes/" >
</applet>
is there any problem with my tag or directory structure,
It would be great ful and thanks for helping in solving this problem.
sai.

Is this an issue with the "T-engine" or the "J-engine"? Are you using a
ubbconfig file or weblogic.properties file? Can you post the stack trace?
This may be an known issue and simply require you to install the latest
service pack for WLS 5.1 (aka. J-engine)...
Mary Ann Slavin wrote:
Accordning to the Software Product Information (SPI) for WLE 5.1 it is
available on the following Linux versions so this could be a problem
with the version you are running.
"BEA WebLogic Enterprise 5.1 software for Red Hat Linux 6.2 and Reliant
Unix 5.45 is available separately. "
MAS
yajneesh Sabharwal wrote:
hello friends,
I have a Problem in Using Weblogic 5.1
I am using weblogic 5.1 Enterprise on Linux 2.2.16 SuSE (7.0) with
Dual Celeron 550MHz and 1GB RAM. The server runs our web application
which uses the servelt, JSP and XSQL technology. The problem is
that often i receive ASSERTION FAILURES where after the jsp's stop
displaying content. Is this a Weblogic administration problem or
the underlying OS problem. Kindly advice.
Thankx in Advance
Yajneesh sabharwal

Problem while using camera connetor and Sony DSC-M1

Dear all
My digital Camera Sony DSC-M1 is able to take pictures and take video into mpeg4 format .
this is the revirew of this camera
http://www.steves-digicams.com/2004_reviews/m1.html
However, I got a problem while using this camera with iPod +Camera connector.
When I plug this camera into camera connector , ipod will transfer all photo from the camera , but do nothing with the video.
I guess that problem is the video file is not inside the "/DCIM" folder
All video file ( *.mp4 ) are all in the folder named " /MP_ROOT/101MNV01/ "
Can anyone help me how to make this sync from camera to ipod automatically both photo and video ?
This problem also bother me while I am using iPhoto to transfer the file when I was home .
pls , help me , thanks a lot

Hi there, I'm having exactly the same problem. Have you found out how to do it?

Problem while using DTW

Hello Experts,
I am puzzled with a problem while using DTW tool for migration.
while connencting this tool with database, I am facing problem
Connection to (server Nane) has failed
Error code:126
Fail to load OBServer.dll
Hope You will answer my query soon.
Thanks,
Regards,
Saurabh Jain

Saurabh Jain,
Enter sap b1 user id and password.
Enter server name correctly.
Click options,Click choose a database,Click
Choose databse,Select correct DB type,
Enter DB user,Correct DB password,Click Refresh,
Select Correct database name you want to upload.
Click Ok.
Hope above answer helps.
Jeyakanthan

Cyberoam problem while using wifi on iPhone 5

cyberoam problem while using wifi on iPhone 5

yes I have a problem. big problem which is causing an itch in my nose. I M a college student and i use wifi of my college for internet surfing and downloading from my iphone 5. for That I got to first login into cyberoam. I do so and start browsing. but the problem is,the cyberoam login page pops up every minute asking to login. it causes problem while I keep anything for downloading. it's the cause only with my iPhone 5. I use my windows pc without any problem. what is the sloution for this. I hope the question is quite clear to you.

Problem while using dynamic geo characteristic on a map

Similar Messages

Maybe you are looking for