Problem while using reply all with non english sen...

My company recently decided to also inlcude the chinese name in the e-mail address.
When the directory is updated, I face some difficulities when replying mail.
There are some e-mail addresses are not recognized properly and resulted in Nokia
Mail for Exchange complaints that some e-mail address are not valid.
It seems the problem is not always true for every Chinese e-mail address.
It sounds to me that it might be a problem of the e-mail adress length or the
e-mail address with Chinese name are interpreted incorrectly.
I hope that Nokia can look into the said issue.
Thanks a lot!

Similar Messages

I am having problem while using ms word with anjal( OS X Lion 10.7.5 (11G63))

i am having problem while using ms word with anjal is not working properly but its working in facebook and other areas.i need and its very important to using tamil fonts for my job.can anyone help me out from this problem.
thanking you
by
moses

Those who are knowledgable in this area (myself not among them) say that Word's support for Asian languages is faulty. The best word processor for that use is "Mellel."

AUDIO PROBLEM WHILE USING OR ALONG WITH WEBCAM

Hi friends,
SUBJECT : AUDIO PROBLEM WHILE USING OR ALONG WITH WEBCAM
I'm not getting any sound while using web-cam.
I tried recording my voice , and played.. i can see my video but audio
Do we have any settings where i need to cross-check to make sure that everything being turned-on ?
My laptop details:-
HP Pavilion dv6 laptop
Operating system Installed - Windows 7
Can someone help me with this?
Thanks
kiran

Hi,
not sure if coincidence or the same question, but the same question got asked internally. The seeded option is required to get the OJSP filter installed. Here's the internal response
ADF View integration with MDS not configured
In web.xml, you need to have mds-ojsp intg enabled to load jspx base + customizations from MDS. In your web project in Jdev, go to ADFv project properties and select “Seeded customization” property. It would enable mds-jsp engine configuration in web.xml. If you want to use user personalization feature at runtime, you would need to select “User customization” property as well which would enable ADFv change persistence config in web.xml.
Warning: Some of the metadata under ... is packaged as part of both WAR and MAR. This metadata cannot be accessed from WAR using MDS.
For these two packages, you are including the files in both WAR & MAR. This warning conveys that since these base files are being put in MAR, at runtime they would be read from mds repository & not from WAR.
Frank

Problem while using cewolf library with jsf jboss.

Hi Guys,
I am trying to use cewolf library to generate graphs in my web application based on jsf. But I am getting the following exception.
I have pointed down that cewolf. jar file is causing the problem.
javax.servlet.ServletException: #{LoginBean.validateUser}: javax.faces.el.EvaluationException: javax.ejb.NoSuchObjectLocalException: Object Not Found ; CausedByException is:
     Receive timed out
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:209)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
root cause
javax.faces.FacesException: #{LoginBean.validateUser}: javax.faces.el.EvaluationException: javax.ejb.NoSuchObjectLocalException: Object Not Found ; CausedByException is:
     Receive timed out
     com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:78)
     javax.faces.component.UICommand.broadcast(UICommand.java:312)
     javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)
     javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)
     com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:75)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
And this login pages does not at all uses the cewolf library.

Hello, Reena
Your process flow seems to be correct in term of getting/freeing memory.
Following error
The problem occurs after executing the procedure for 5000 records and I get the error
ORA-04031: unable to allocate 4176 bytes of shared memory ("shared pool","unknown object","sga
heap","library cache")may be caused by memory leaks in xdk or memory fragmentation(due to get/free memory cycle)
To find out if this is an memory leak issue you could try to monitor V$SGASTAT from one session while running your batch process in another session.
To prevent (or lower its impact) fragmentation issues try to PIN objects, and adjust java_pool_size and shared_pool_reserved_size.
Anyway, counsult your Oracle DBA.
Oracle version 8.1.7.0.0I think, you should apply database patch first of all. The latest one (8.1.7.4.x) could be accured from Metalink.

Problem while using PrepStmt.executeBach with Weblogic 6.0sp1 and

- I'm getting the same error when I use WLS 6.0 SP1 & thin driver. I'm not
getting this error when I use thin driver without WLS.
- This is definitely a bug in WLS. As a workaround put classes.zip {that
comes with oracle installation} before weblogic.jar in your classpath. This
way, classloader will load the oracle supplied classes & everything will
work smoothly
Manav
"Joseph Weinstein" <[email protected]> wrote in message
news:[email protected]...
>
>
Ruta wrote:
Hi Joe
I tried using a java standlaone program using prep stmts and oracle thin
driver
and it works just fine.
So is this a bug with Weblogic? Finally connection pooling isapplication server's
responsibility, isnt it..
I am inlcined to conclude this coz connection pooling works fine withStatement.executeBatch()
but not with prepStatement.executeBatch()
How do I resolve this now.
Thanks
Ruta
...Does it not release the connectionOk. Now let me see the JDBC code example. I'll see what's up.
Joe
Joseph Weinstein <[email protected]> wrote:
The first thing you should do is to reduce the problem to the simplest
form.
Write a tiny standalone program that just uses the thin driver
directly,
and repeats the code you are trying to run. This will eliminateWebLogic
from the equation and see if it's an Oracle-only bug.
Joe
Ruta wrote:
Hi,
I am trying to do multiple inserts in a table using the
PreparedStatement
of JDBC2.0.
I am using a TxDataSource of Weblogic server with a thin driver
oracle
pool. I
am using the driver classes that come with the weblogic.jar.
The problem is as follows:
I can manage to succesfully do the executeBatch a few
times..Interestingly
it
executes as many no. of times as the Initial capacity(not even maxcapacity) of
my connection pool.
Then it gives me the following error:
java.sql.SQLException: java.sql.SQLException: Missing IN or OUT
parameter
at index::
1
at
weblogic.jdbc.rmi.SerialStatement.executeBatch(SerialStatement.java:394)
atcom.equitable.acs.common.ACSCtrlBean.saveSDECData(ACSCtrlBean.java:147)
atcom.equitable.acs.common.ACSCtrlBeanImpl.saveSDECData(ACSCtrlBeanImpl.java:1
10)
atcom.equitable.acs.common.ACSCtrlBeanEOImpl.saveSDECData(ACSCtrlBeanEOImpl.ja
va:30)
atcom.equitable.acs.common.ACSCtrlBeanEOImpl_WLSkel.invoke(ACSCtrlBeanEOImpl_W
LSkel.java:133)
atweblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
atweblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java
:128)
atweblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
atweblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.
java:118)
atweblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:1
7)
atweblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
This Oracle error has error code 17041.. I could not find more infoon it, even
from the Oracle site.
I conclude that the connections are not getting relesed.
But i ahve written
con.close(); even
con=null; (out of desparation :) )
but still the connection is not released.
I am getting the connection in the saveSDECData method
I need to fix thsi problem ASAP..Any Help/Comments will be
appreciated..
Finally the most interesting part is :
executeBatch works perfectly fine with the Statement object..
so probably the culprit is the PreparedStatement implementation ofOracle..Can
anybody validate this pls
Regards
Ruta--
PS: Folks: BEA WebLogic is expanding rapidly, with both entry andadvanced
positions
for people who want to work with Java, XML, SOAP and E-Commerceinfrastructure
products.
We have jobs at Nashua NH, Liberty Corner NJ, San Francisco and SanJose
CA.
Send resumes to [email protected]
PS: Folks: BEA WebLogic is expanding rapidly, with both entry and advancedpositions
for people who want to work with Java, XML, SOAP and E-Commerceinfrastructure products.
We have jobs at Nashua NH, Liberty Corner NJ, San Francisco and San JoseCA.
Send resumes to [email protected]

Problem while using camera connetor and Sony DSC-M1

Dear all
My digital Camera Sony DSC-M1 is able to take pictures and take video into mpeg4 format .
this is the revirew of this camera
http://www.steves-digicams.com/2004_reviews/m1.html
However, I got a problem while using this camera with iPod +Camera connector.
When I plug this camera into camera connector , ipod will transfer all photo from the camera , but do nothing with the video.
I guess that problem is the video file is not inside the "/DCIM" folder
All video file ( *.mp4 ) are all in the folder named " /MP_ROOT/101MNV01/ "
Can anyone help me how to make this sync from camera to ipod automatically both photo and video ?
This problem also bother me while I am using iPhoto to transfer the file when I was home .
pls , help me , thanks a lot

Hi there, I'm having exactly the same problem. Have you found out how to do it?

Problem with Non-English Fields Output to PDF by JASPER in JDev10.1.3

I am using jsprx files(designed in i-report) to generate pdf reports out of an oracle database.
The non-English fields are shown correctly when I output the report into an HTML or when I view it with JasperView.
If I try making PDF files (JasperExportManager.exportReportToPdfFile) the static fields containing e.g.Arabic/Chineese characters won't be displayed and dynamic fields from the database with non-English contents will be shown as ??? or null.
I received some suggestions about using PARAMETERS to feed the report instead of FIELDS, which I think can not be helpful in this case and in general.
I think this should be a common problem. These are the components I am using:
itext-1.4.7. jar
commons-digester- 1.7.zip
jasperreports- 1.2.8.jar
Any comment or help is appreciated.
Thanks
Farbod

I am using jsprx files(designed in i-report) to generate pdf reports out of an oracle database.
The non-English fields are shown correctly when I output the report into an HTML or when I view it with JasperView.
If I try making PDF files (JasperExportManager.exportReportToPdfFile) the static fields containing e.g.Arabic/Chineese characters won't be displayed and dynamic fields from the database with non-English contents will be shown as ??? or null.
I received some suggestions about using PARAMETERS to feed the report instead of FIELDS, which I think can not be helpful in this case and in general.
I think this should be a common problem. These are the components I am using:
itext-1.4.7. jar
commons-digester- 1.7.zip
jasperreports- 1.2.8.jar
Any comment or help is appreciated.
Thanks
Farbod

[SOLVED!] On USB drives, problems with non-English chars and HAL

Hello,
I am having a problem with non-English caracters (áãàçéẽê...) on files stored on my USB drive.
On Windows they're created with the correct name. But on Linux the files have the non-English characteres replaced by '?' and are not accessible.
If I manuallly mount the drives using 'mount -o iocharset=utf8 /dev/sdb1 /media/usbdisk' the characters are OK, so I think I just need to get HAL to pass the correct parameters to mount. However I don't know how to do that, and haven't found any good solution.
I tried to build a custom kernel setting the default charset as UTF-8 and it didn't work.
Any ideas? I'm using x86-64, HAL 0.5.13-3 and my locale is pt-BR.UTF-8.
Thanks!
EDIT: Actually, this is not a HAL problem, but a problem with 'exo'. For the solution, I edited /etc/xdg/xfce4/mount.rc and added iocharset=utf8 to the [vfat] category.
Last edited by Renan Birck (2009-11-28 20:54:23)

I don't use Thunar presently, but I looked in the Thunar Volume Manager doc and I didn't find anything to change the mount options of removable drives. I am not quite sure if it's possible or not. Maybe someone using it can tell for sure.
But if it is not possible to change the mount options, a possible solution is to disable the Thunar Volume Manager plugin and to use something else more configurable to manage the automount function.
Personally I use the halevt package from AUR which uses configuration files in the xml format.
It's not so easy to use but is highly configurable.
But there exists other tools also.
I can help you with halevt if you choose that way...

Problem with non english caracter

Hi,
I'm using JRockit 1.5.0_03, I have a problem with pages with non english caracters. is it possible to change certain properties of JVM like "user.country", "file.encoding" or "user.language"? If yes, how can I change it?
Thanks in advanced

Hi,
I'm using JRockit 1.5.0_03, I have a problem with pages with non english caracters. is it possible to change certain properties of JVM like "user.country", "file.encoding" or "user.language"? If yes, how can I change it?
Thanks in advanced

Problem while using receive after invoke activity

Hi,i have got a problem while using a receive activity,after a invoke activity.The invoke acivity seems that does not work and also the debugger runs forever....But if i remove the receive activity,the invoke activity works fine.
<h2>The output of GlassfishV2 is:<h2>
This is from the exception block.
com.sun.bpel.model.meta.impl.RInvokeImpl@f590c6={<?xml version="1.0" encoding="utf-8" ?>
*<invoke name="Invoke1"*
partnerLink="PartnerLink2"
portType="tns:test_service3"
operation="luizao"
inputVariable="LuizaoIn"
outputVariable="LuizaoOut"
xmlns:tns="http://dim.test.org/"></invoke>}
*[Fatal Error] :1:1: Content is not allowed in prolog.*
System exception occured while executing a business process instance.
java.lang.NullPointerException: WSDL message model is null
at com.sun.jbi.engine.bpel.core.bpel.debug.WSDLMessageImpl.<init>(WSDLMessageImpl.java:56)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.CallFrame.onFault(CallFrame.java:380)
at com.sun.jbi.engine.bpel.core.bpel.model.runtime.impl.SyntheticThrowUnitImpl.doAction(SyntheticThrowUnitImpl.java:91)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELInterpreter.execute(BPELInterpreter.java:145)
at com.sun.jbi.engine.bpel.core.bpel.engine.BusinessProcessInstanceThread.execute(BusinessProcessInstanceThread.java:76)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELProcessManagerImpl.process(BPELProcessManagerImpl.java:818)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:261)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:742)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.processRequest(BPELSEInOutThread.java:401)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.processMsgEx(BPELSEInOutThread.java:240)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.run(BPELSEInOutThread.java:158)
This is from the exception block.
I think correlation sets are ok(i have two receive activities).
I use Netbeans6.0 IDE.
Can anyone help me?
Sorry,but i don't speak English fluently

I can't debug it more,because the bpel variables window disappears when the proccess comes to invoke activity.
The bpel code is simple:I have got a sequence with follow activities:
receive
assign
invoke
receive
assign
reply
The code is:
<?xml version="1.0" encoding="UTF-8"?>
<process
    name="Testfile2"
    targetNamespace="http://enterprise.netbeans.org/bpel/Test2/Testfile2"
    xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:tns="http://enterprise.netbeans.org/bpel/Test2/Testfile2" xmlns:ns0="http://xml.netbeans.org/schema/Testfile2" xmlns:ns1="http://j2ee.netbeans.org/wsdl/Testfile2">
   <import namespace="http://j2ee.netbeans.org/wsdl/Testfile2" location="Testfile2.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <import namespace="http://enterprise.netbeans.org/bpel/test_service3Wrapper" location="Partners/test_service3/test_service3Wrapper.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <import namespace="http://dim.test.org/" location="Partners/test_service3/test_service3.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <import namespace="http://enterprise.netbeans.org/bpel/test_service2Wrapper" location="Partners/test_service2/test_service2Wrapper.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <import namespace="http://dim.test.org/" location="Partners/test_service2/test_service2.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <partnerLinks>
      <partnerLink name="PartnerLink3" xmlns:tns="http://enterprise.netbeans.org/bpel/test_service2Wrapper" partnerLinkType="tns:test_service2LinkType" myRole="test_service2Role"/>
      <partnerLink name="PartnerLink2" xmlns:tns="http://enterprise.netbeans.org/bpel/test_service3Wrapper" partnerLinkType="tns:test_service3LinkType" partnerRole="test_service3Role"/>
      <partnerLink name="PartnerLink1" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" partnerLinkType="tns:Testfile21" myRole="Testfile2PortTypeRole"/>
   </partnerLinks>
   <variables>
      <variable name="Testfile2OperationOut" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" messageType="tns:Testfile2OperationReply"/>
      <variable name="Operation1In" xmlns:tns="http://dim.test.org/" messageType="tns:operation1"/>
      <variable name="LuizaoOut" xmlns:tns="http://dim.test.org/" messageType="tns:luizaoResponse"/>
      <variable name="LuizaoIn" xmlns:tns="http://dim.test.org/" messageType="tns:luizao"/>
      <variable name="Testfile2OperationIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" messageType="tns:Testfile2OperationRequest"/>
   </variables>
   <correlationSets>
      <correlationSet name="CorrelationSet1" properties="ns1:My_Property"/>
   </correlationSets>
   <sequence>
      <receive name="Receive1" createInstance="yes" partnerLink="PartnerLink1" operation="Testfile2Operation" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" portType="tns:Testfile2PortType" variable="Testfile2OperationIn">
         <correlations>
            <correlation set="CorrelationSet1" initiate="yes"/>
         </correlations>
      </receive>
      <assign name="Assign1">
         <copy>
            <from>$Testfile2OperationIn.part1/ns0:ena</from>
            <to>$LuizaoIn.parameters/ena</to>
         </copy>
         <copy>
            <from>$Testfile2OperationIn.part1/ns0:id</from>
            <to>$LuizaoIn.parameters/id</to>
         </copy>
      </assign>
      <invoke name="Invoke1" partnerLink="PartnerLink2" operation="luizao" xmlns:tns="http://dim.test.org/" portType="tns:test_service3" inputVariable="LuizaoIn" outputVariable="LuizaoOut"/>
      <receive name="Receive2" createInstance="no" partnerLink="PartnerLink3" operation="operation1" xmlns:tns="http://dim.test.org/" portType="tns:test_service2" variable="Operation1In">
         <correlations>
            <correlation set="CorrelationSet1" initiate="no"/>
         </correlations>
      </receive>
      <assign name="Assign2">
         <copy>
            <from>$Operation1In.parameters/hik</from>
            <to>$Testfile2OperationOut.part1/ns0:hik</to>
         </copy>
      </assign>
      <reply name="Reply1" partnerLink="PartnerLink1" operation="Testfile2Operation" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" portType="tns:Testfile2PortType" variable="Testfile2OperationOut"/>
   </sequence>
</process>If it's a bug,that means that i can't use second receive after invoke any more?

Upload text files with non-english characters

I use an Apex page to upload text files. Then i retrieve the contents of files from wwv_flow_files.blob_content and convert them to varchar2 with utl_raw.cast_to_varchar2, but characters like ò, à, ù become garbage.
What could be the problem? Are characters lost when files are stored in wwv_flow_files or when i do the conversion?
Some other info:
* I see wwv_flow_files.DAD_CHARSET is set to "ascii", wwv_flow_files.FILE_CHARSET is null.
* Trying utl_raw.cast_to_varchar2( utl_raw.cast_to_raw('àòèù') ) returns 'àòèù' correctly;
* NLS_CHARACTERSET parameter is AL32UTF8 (not just english ASCII)

Hi
Have a look at csv upload -- suggestion needed with non-English character in csv file it might help you.
Thanks,
Manish

Screen locked with non-English keyboard layout selected

Hello,
I use two keyboard character sets for keyboard. The switch between them is Command-Space.
I also have password requirement for waking up or going from screen saver.
Now if screensaver starts with non-English layout selected, I'm not able to login:
password is not accepted because keyboard layout is not English and switching
to English layout does not work in unlocking window.
Is there any way to change layout while in the unlock window?
Thanks

Yes you are right, this is not a bug, it's just bad user interface. Just imagine the following scenario...
Writing a paper, switching to Greek to enter a couple of characters and leaving the mac idle for 5 mins.
The lock screen comes up asking for a password, unfortunately the user didn't change the language
before the mac was left idle and there is no option to change the language in the lock screen.
User has to hard reset to access the mac and let's hope that the user was saving his paper frequenlty.
So from a coding point of view this is not a bug, but from a user interface design it is a huge flaw

Naming files with non English characters.

I'm using filemaker to creat PDF's through Acrobat 10.1.12. I need to use Polish, Hungarian, Czech and Slovakian characters in the file name but the characters are not recognised and so the file name will not create. This is for Windows, the problem does not occur on a mac.

Hi
Have a look at csv upload -- suggestion needed with non-English character in csv file it might help you.
Thanks,
Manish

Youtube issue - search with non-english letters

The issue appeared after the recent software update, worked correctly in the previous one.
When searching youtube with non-english letters (through iphone remote app), it assumes every letter to be an "enter" and reports a problem connecting to youtube.
Even when I try using the "recent searches", it will report the same problem for non-english items.

you need to report it to apple via http://www.apple.com/feedback/appletv.html

Problem while using struts 1.3.8

Hi All,
I have some problem while using struts 1.3.8 in my application.
I am using OC4J 10.1.2.0.2, my simple coding is follows:
<%@ page contentType="text/html;charset=utf-8"%>
<%@ taglib uri="/WEB-INF/tlds/struts-tiles.tld" prefix="tiles"%>
<%@ taglib uri="/WEB-INF/tlds/struts-bean.tld" prefix="bean"%>
<%@ taglib uri="/WEB-INF/tlds/struts-html.tld" prefix="html"%>
<%@ taglib uri="/WEB-INF/tlds/struts-logic.tld" prefix="logic"%>
<html:xhtml />
<html:form action="<action page>" method="POST" enctype="multipart/form-data" >
<p>
     <label for="Subject" ><span class="Mandatory">*</span> Subject:</label>
     <html:text size="40" property="subject" />
</p>
<p>
     <label for="upload" >Attachment:</label>
     <html:file size="40" property="attachmentFile" />
</p>
<p>
         <html:submit />
</p>after clicking my the submit button in the server console i m getting
JAAS-OC4J: JAZNFilter.doFilter - unable to find the current servlet
javax.servlet.ServletException: JAAS-OC4J: JAZNFilter.doFilter - unable to find the current servlet
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222)
at org.apache.struts.tiles.commands.TilesPreProcessor.doForward(TilesPreProcessor.java:260)
at org.apache.struts.tiles.commands.TilesPreProcessor.execute(TilesPreProcessor.java:217)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:462)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at com.ed.ecomm.edcore.web.filters.SecurityFilter.doFilter(SecurityFilter.java:196)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at com.ed.ecomm.edcore.web.filters.MonitoringFilter.doFilter(MonitoringFilter.java:138)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at com.ed.ecomm.edcore.web.filters.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:92)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
further i investigate and i removed the "enctype=multipart/form-data" from the form attribute its working fine..
but without using this attribute struts doesn't support the "upload" i.e, form file... its throwing another exeception..
could you anyone please let me know whether i can change my OC4J server version of anything need to do..
many thanks in advance

I'm having the same exact problem. Any ideas?
Schema sfactory;
Schema schema;
sfactory = SchemaFactory.newInstance(XMLConstants.W3C_XML_SCHEMA_NS_URI);
ErrorHandler eHandler = new MyErrorHandler();
sfactory.setErrorHandler(eHandler);
LSResourceResolver lsrResolver = new MyLSResourceResolver();
sfactory.setResourceResolver(lsrResolver);
schema = sfactory.newSchema(new File(argv[1]));The last line gives me NullPointerException. I know the file (argv[1]) exists and can be read because I can print it with a BufferedReader.

Problem while using reply all with non english sen...

Similar Messages

Maybe you are looking for