Problem while working with Store Manager (while Creating Employee) on VISTA

Hi
Is anyone workin on Windows Vista (for the Store Manager)?
I am using Vista for the said application but the system always hangs whenever I try to create a new employee with Store Manager. Can anyone help me out with any solution so that it doesn't hang ?
The steps I am following is as follows-
1. Go to Store Manager GUI > Administartion > Employee Maintenance.
2. Click on the Create new.
3. Key in the entries.
4. Here the p'lem comes into picture.
5. When I try to switch over to next entry the system hangs.
Please help me out.
Edited by: Shantanu Sinha on Apr 10, 2008 9:58 AM

Hi srm_2010,
From your description, you fail to set up SQL Server AlwaysOn Availability group in Windows Server 2008 R2 cluster. The error 41105 could be caused by several factors, such as insufficient account permissions and so on.
To resolve this issue, firstly, I recommend you check the prerequisites, restrictions, and recommendations for AlwaysOn Availability Groups according to this
article.
Secondly, as the error message indicates, please disable the AlwaysOn feature in SQL Configuration Manage on both nodes, restart the SQL Server service. Then enable the AlwaysOn feature and restart the SQL Service again. This time set up AlwaysOn Availability
Groups again and please note the following things.
1. Ensure that the AvailabilityGroup name is defined as a different one from your Windows Cluster name.
2. Make sure that SQL Server service account has full control permission on the Window Cluster, which is described in this
blog.
However, if the error persists, please post the SQL Server error log for analysis. Additionally, if you encounters any errors when configuring Windows Cluster, I recommend you post the question in the Windows
server clustering forum at
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverClustering . It is appropriate and more experts will assist you.
Thanks,
Lydia Zhang

Similar Messages

Problem while Creating MVLOG with synonym in Oracle 9i:Is it an Oracle Bug?

Hi All,
I am facing a problem while Creating MVLOG with synonym in Oracle 9i but for 10G it is working fine. Is it an Oracle Bug? or i am missing something.
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
2 REFRESH ON DEMAND
3 WITH PRIMARY KEY
4 AS
5 SELECT name,id
6 FROM syn_t;
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
2 WITH PRIMARY KEY
3   (name)
4    INCLUDING NEW VALUES;
Materialized view log created.
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE    9.2.0.6.0       Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
REFRESH ON DEMAND
WITH PRIMARY KEY
AS
2    3    4    5 SELECT name,id
FROM syn_t;   6
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
WITH PRIMARY KEY
(name)
INCLUDING NEW VALUES; 2    3    4
CREATE MATERIALIZED VIEW LOG ON MV_t
ERROR at line 1:
ORA-12014: table 'MV_T' does not contain a primary key constraintRegards
Message was edited by:
Avinash Tripathi
null

Hi Nicloei,
Thanks for the reply. Actually i don't want any work around (Creating MVLOG on table rather than synonym is fine with me) . I just wanted to know it is actually an oracle bug or something else.
Regards
Avinash

Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.

Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ...

Problem while creating xml with cdata section

Hi,
I am facing problem while creating xml with cdata section in it. I am using Oracle 10.1.0.4.0 I am writing a stored procedure which accepts a set of input parameters and creates a xml document from them. The code snippet is as follows:
select xmlelement("DOCUMENTS",
xmlagg
(xmlelement
("DOCUMENT",
xmlforest
(m.document_name_txt as "DOCUMENT_NAME_TXT",
m.document_type_cd as "DOCUMENT_TYPE_CD",
'<![cdata[' || m.document_clob_data || ']]>' as "DOCUMENT_CLOB_DATA"
) from table(cast(msg_clob_data_arr as DOCUMENT_CLOB_TBL))m;
msg_clob_data_arr is an input parameter to procedure and DOCUMENT_CLOB_TBL is a pl/sql table of an object containing 3 attributes: first 2 being varchar2 and the 3rd one as CLOB. The xml document this query is generating is as follows:
<DOCUMENTS>
<DOCUMENT>
<DOCUMENT_NAME_TXT>TestName</DOCUMENT_NAME_TXT>
<DOCUMENT_TYPE_CD>BLOB</DOCUMENT_TYPE_CD>
<DOCUMENT_CLOB_DATA>
<![cdata[123456789012345678901234567890123456789012]]>
</DOCUMENT_CLOB_DATA>
</DOCUMENT>
</DOCUMENTS>
The problem is instead of <![cdata[....]]> xmlforest query is encoding everything to give < for cdata tag. How can I overcome this? Please help.

SQL> create or replace function XMLCDATA_10103 (elementName varchar2,
2                                             cdataValue varchar2)
3 return xmltype deterministic
4 as
5 begin
6     return xmltype('<' || elementName || '><![CDATA[' || cdataValue || ']]>
7 end;
8 /
Function created.
SQL> select xmlelement
2         (
3            "Row",
4            xmlcdata_10103('Junk','&<>!%$#&%*&$'),
5            xmlcdata_10103('Name',ENAME),
6            xmlelement("EMPID", EMPNO)
7         ).extract('/*')
8* from emp
SQL> /
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[SMITH]]></Name>
<EMPID>7369</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[ALLEN]]></Name>
<EMPID>7499</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[WARD]]></Name>
<EMPID>7521</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[JONES]]></Name>
<EMPID>7566</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[MARTIN]]></Name>
<EMPID>7654</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[BLAKE]]></Name>
<EMPID>7698</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[CLARK]]></Name>
<EMPID>7782</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[SCOTT]]></Name>
<EMPID>7788</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[KING]]></Name>
<EMPID>7839</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[TURNER]]></Name>
<EMPID>7844</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[ADAMS]]></Name>
<EMPID>7876</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[JAMES]]></Name>
<EMPID>7900</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[FORD]]></Name>
<EMPID>7902</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[MILLER]]></Name>
<EMPID>7934</EMPID>
</Row>
14 rows selected.
SQL>

Problem while Creating Service order through Work Order

Hi Gurus,
I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
Can anyone explain me this?
Is this something that one can explain?
Regards,
Murugesh R
Rewards for value replies.

Closed..

Getting Login error while working with User Management

Hi,
I am new to EBS and learning to work with 'User Management'.
I have EBS 11i installed on XP.
I face following error message when try to open any screen in 'User Management' responsibility...
*'This type of function cant be performed without logging into E-Business Suite Home Page'....*
This error is strange for me because i login with SYSADMIN and then choose 'User Management' responsibility.
Thanks in advance for any helpful hint.
Regards,
Sohail.

Hi,
I face following error message when try to open any screen in 'User Management' responsibility...
*'This type of function cant be performed without logging into E-Business Suite Home Page'....*Please mention the navigation path to reproduce the issue.
Also, please check Apache log files for any errors.
This error is strange for me because i login with SYSADMIN and then choose 'User Management' responsibility.Please see (How to to Define an Application User That Has All The Priviledges in User Management Responsibility options As SYSADMIN User [ID 378262.1]).
Thanks,
Hussein

Problem while creating Service order

Hi Gurus,
I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
Can anyone explain me this?
Is this something that one can explain?
Regards,
Murugesh R
Rewards for value replies.

Hi Murgesh,
If GL code is not getting bydefault from the system it is needed to be provided by the user.
If normally one GL is there or other than master data services if single GL is there u can set that in SPRO.
it is avalible in deafult settings in order node
If you are creating the order with refrence to PR then it will take account assignement as "F" system will pick up all the details from PM module. This is the integration of MM & PM module.
But if your PO is not w.r.t. PM orders PR then needs to be given manully.
Ramesh
Edited by: RameshChandra Soni on Jul 25, 2008 8:16 AM

Problem while creating WBS elements using LSMW

Hello experts,
I am able to create Project Definitions using LSMW. (using recording)
But there is a problem while creating WBS elements.
Tcode CJ20 has table control and that will become problem for multiple rows (levels).
Can anyone suggest a solution to mass upload WBS elements?
Thanks for your valuable advice.

Hi,
Instead of using "BAPI_PROJECT_MAINTAIN", use following solution. We are using this solution and it is working pretty good.
If the WBS element is already created and you want to create one more with same data, first get the WBS related information using BAPI_PROJECT_GETINFO as you are doing currently.
I am using different sets of BAPIs to create project, create / change WBS element.
I use function module from Function group CJ2001 ( Project related BAPIs ), CJ2054 ( WBS related BAPIs ) and PS_BAPI ( pre/post processing BAPIs ). There are specific order in which you need to execute these BAPIs.
For example if you want to create / change the WBS element, the BAPIs sequence is:
<b>1. BAPI_PS_INITIALIZATION
2. BAPI_BUS2054_CREATE_MULTI ( to create WBS )
or
2. BAPI_BUS2054_CHANGE_MULTI ( to change WBS )
3. BAPI_PS_PRECOMMIT
4. BAPI_TRANSACTION_COMMIT</b>
Check the documentation of BAPI "BAPI_BUS2054_CREATE_MULTI " to see how these function modules work.
Let me know if you need further information.
Regards,
RS

Problem while creating sales order

Hi
   We are facing a problem while creating a sales order in R/3. The sales order number is getting generated. But we are not able to view the same in the backend meaning it is not there in the database. Any inputs would be of help.
regs
Steve

Hi everybody,
I've got a problem with this too. I use the BAPI_SALESORDER_CREATEFROMDAT2 with BAPI_TRANSACTION_COMMIT and the webdynpro shows me the document number created in R3 with a Success message. But when I go to R3 and try to display the created sales order, it doesn't exists. So... Maybe I'm doing something wrong with the BAPI_TRANSACTION_COMMIT. ¿Can anybody help me with this?
The code I use is this:
When the user pushes the SAVE button in the WebDynpro, this code executes:
    //@@begin onActionSave(ServerEvent)
     wdThis.wdGetSOCreaCustController().executeBapi_Salesorder_Createfromdat2();
     wdThis.wdGetSOCreaCustController().executeBapi_Transaction_Commit();
    //@@end
In the custom Controller I've got the code for those executions:
public void executeBapi_Salesorder_Createfromdat2( )
    //@@begin executeBapi_Salesorder_Createfromdat2()
     try {
          wdContext.currentBapi_Salesorder_Createfromdat2Element().modelObject().execute();
     catch (Exception ex) {
          wdComponentAPI.getMessageManager().reportException(ex.getMessage(), false);
     wdContext.nodeOutput().invalidate();
    //@@end
public void executeBapi_Transaction_Commit( )
     try {
          wdContext.currentBapi_Transaction_CommitElement().modelObject().execute();
     catch (Exception ex) {
          wdComponentAPI.getMessageManager().reportException(ex.getMessage(), false);
     wdContext.nodeOutput().invalidate();
    //@@end
¿Is something wrong? ¿Is something missing?

Problem while creating JCA connection to MDM server

Hi All,
I have restarted my mdm connector(com.sap.mdm.tech.connector) along with the applications related to Enrichment Controller. All applications restarted successfully. After that I tried accessing the URL
http://MDMSERVER:50000/MDM_EnrichmentController/WorkflowPolling?process=Monitor
but I am getting following exception in this page
Polling Repository
    name=Vijaybabu_Repo_on_MDMSERVER, status=No repository connection, error description=com.sap.mdm.net.ConnectionException: Problem while creating JCA connection to MDM server MDMSERVER
        Enrichment Request Threads
Could somebody help me pointing if something I have missed..
Thanks and Regards,
Manoj

hi Swarna,
I have verified the repository and found 0 fatal errors, 0 non-fatal erros and 0 warnings. I also checked the MDM Factory and Connector service is running fine.
The detailed exception is
Sep 2, 2008 12:49:40 PM com.sap.mdm.logging.MdmLogger error
SEVERE: Problem while creating JCA connection to MDM server 'KOLAPON'
com.sap.mdm.net.ConnectionException: Can not resolve JCA connection
     at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnection(JcaConnectionUtil.java:119)
     at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnectionAccessor(JcaConnectionUtil.java:62)
     at com.sap.mdm.internal.session.JcaConnectionAccessor.reserveConnection(JcaConnectionAccessor.java:70)
     at com.sap.mdm.internal.session.JcaConnectionAccessor.reserveConnection(JcaConnectionAccessor.java:59)
     at com.sap.mdm.repository.commands.GetRepositoryStatusCommand.execute(GetRepositoryStatusCommand.java:67)
     at com.sap.mdm.enrichment.common.ECAdminUtils.getRepositoryStatus(ECAdminUtils.java:125)
     at com.sap.mdm.enrichment.common.EnrichmentUtils.validateRepostiryConfiguration(EnrichmentUtils.java:889)
     at com.sap.mdm.enrichment.common.EnrichmentUtils.getCatalogManager(EnrichmentUtils.java:144)
     at com.sap.mdm.enrichment.workflowpolling.PollingThread.getCatalogManager(PollingThread.java:166)
     at com.sap.mdm.enrichment.workflowpolling.PollingThread.run(PollingThread.java:102)
Caused by: com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: "ConnectionManager" is closed. Possible reasons: 1) connector "MDM Factory" is stopped or not started, 2) Connector service is stopped or has not been started.
     at com.sap.mdm.connector.connection.MdmConnectionFactory.getConnectionEx(MdmConnectionFactory.java:223)
     at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnection(JcaConnectionUtil.java:108)
     ... 9 more
Caused by: com.sap.engine.services.connector.exceptions.BaseResourceException: "ConnectionManager" is closed. Possible reasons: 1) connector "MDM Factory" is stopped or not started, 2) Connector service is stopped or has not been started.
     at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:122)
     at com.sap.mdm.connector.connection.MdmConnectionFactory.getConnectionEx(MdmConnectionFactory.java:213)
     ... 10 more
Regards,
Manoj
Edited by: Manoj Kumar Nanda on Sep 2, 2008 9:21 AM

Problem while creating CAF project in NWDS workspace

Hi Experts,
We are facing a problem while creating CAF project in NWDS workspace. Even though we have tried in new workspace we are facing the issue. Find the below build error.
We are not getting any error when we build from CBS.
[javac] ERROR: C:\sap\test_VC_DC.jdi\0\DCs\test.com\ja\bl\journal\ejbmodule\_comp\src\com\test\ja\bl\journal\modeled\ModifyJournalLineItemRequestMessage.java:7: cannot find symbol
[javac] ERROR: symbol : class JournalLineItemDetail1
[javac] ERROR: location: package com.test.ja.cm.util.modeled
[javac] ERROR: import com.test.ja.cm.util.modeled.JournalLineItemDetail1;
when we expand com.test.ja.cm.util.modeled there is no file with name JournalLineItemDetail1 and the actual file exists is JournalLineItemDetail but we are not able to understand why 1 is appending to the file JournalLineItemDetail. Can somebody throw some light on this?
Regards,
Pradeep

Have you checked out the topics at the right in the More Like This section?
OT

Problems while creating Web Services in development server

Hello,
We are facing problems while creating Web services . The transaction like WSADMIN, WSCONFIG are not there in development server. Its gives message u2018This transaction is obsoleteu2019.
Due to this while creating Webservice, there is and error message . Kindly guide me whats needs to be done.
We have also tried the transaction WSADMIN2 as suggested by SAP, but didnu2019t know wat needs to be done.
Regards,
Rachel
Edited by: Rachel on Feb 3, 2009 9:15 AM

Hi,
With your help, we were configuring WEB Service through soamanger.Due to some problem, we couldn't proceed further.Kindly guide us with the further steps.
*steps followed *
Step 1 : Entered Service Registry Parameters in WSPARAM .
Step 2 : In transaction SOAMANAGER->Technical Configuration -->System Global settings
Step3 : From u2018SE80u2019 transaction, selected the package ZHR and then right clicked to create the enterprise service -> Client Proxy (Service Producer)
We have followed steps in se80.Don't know how to proceed further.
We are unable to find the service in soamanger .How to find the service name in soamanager?
Regards,
Rachel
Edited by: Rachel on Feb 3, 2009 12:38 PM
Edited by: Rachel on Feb 3, 2009 12:48 PM

Problem while creating the Partner Address in CRM

Hi,
   We are facing one problem while creating the new address for the Business Partner.
   When ever customer wants to change the address : we are following one process : where we are
   using 'BAPI_BUPA_ADDRESS_ADD' functin module. Becuse of this , new addrss number will be generated for the
corresponding account in BUT021_FS table.But this table contains old address number as a first record, so that when ever
we display the partner address in UI, it is displaying the old address only because first entry of the the table 'BUT021_FS'
contains the old address number.
Because of this , we are getting lots of complaints regarding this.
Can you please help on this ASAP.
Thanks & Regards
Pradeep.

Try BAPI_BUPA_ADDRESS_CHANGE for address change followed by BAPI_TRANSACTION_COMMIT . It works.

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Have you checked out the topics at the right in the More Like This section?
OT

Problem while creating URL iview (in EP7.0)

Hi,
I encountered a problem while creating URL iview (in EP7.0) as when I selected the iview template for creating the URL iview, the content area got displayed as
"No templates to display. You are not assigned to any existing templates."
please assist me in this regard.
Thanks,
Suri

Hi Manoj,
Thank you for your reply.
I am still getting the same messages even after creating the iview template in EP7.0
Created through:
content Admin --> portal content --> <folder>new --> iview --> seleting "Portal component - create an iView from a portal component contained in a deployed portal archive (PAR file)" <next> --> seleting "com.sap.portal.appintegrator.sap" <next> --> webdynpro <next> --> finish.
Open object for editing...--> Object is a Template to Yes.
Result :
content Admin --> portal content --> <folder>new --> iview --> seleting "iview template- create an iView from an existing iView template" <next> which displays the same message.
"No templates to display. You are not assigned to any existing templates."
Rgrds,
Suri.

Problem while working with Store Manager (while Creating Employee) on VISTA

Similar Messages

Maybe you are looking for