Problem whitg keys in internet explorer.
Hello:
I speak only a bit english. I wait that you can understand me.
I need execute sap in a internet explorer. When I push F1 or F2 etc. to execute an action of the programs I don't see that it's ok. The program don't run. I see, that is the i.e tha run this command. If a pust f1 I see the help of i.e.
¿How can I send the keys to sap and not no explorer?
Thank you very mucho.
what kind of sap application?
is it ITS (internet transaction server) based applications
or
BSP (Business server pages) application
or
normal SAP GUI in browser?
Raja
Similar Messages
-
How to make ENTER key in internet explorer run the BIP report?
In BI publisher 11g, users wanted that after entering the values for the parameter, they hit the ENTER key ( on the keyboard) and the report should run .
In Mozilla firefox, when I hit ENTER key on the keyboard report runs fine... but in Internet explorer, it does not ( infact in internet explorer TAB key works)
How to make ENTER key in internet explorer run the report?
Thanks
AshishPerform the following steps and tell us if it resolve this issue:
1. In Internet Explorer, click Tools, and then click Internet Options.
2. Click the Security tab.
3. There are four security zones listed:
* Internet
* Local intranet
* Trusted sites
* Restricted sites
Click the zone being used by P6, which is noted at the bottom right hand corner of the browser window when the P6 URL is being accessed.
4. Under Security level for this zone, click Custom Level.
5. Under Downloads, under Automatic prompting for file downloads, click Enable, and then click OK two times.
6. The browser will need to be restarted for the change to take effect.
Refer to the following Microsoft Knowledge base article for additional file download and active x controls which should also be enabled: http://support.microsoft.com/kb/883255 -
Problem with ACE and Internet Explorer 8
I have a problem with ACE (system A2(1.1)) and Internet Explorer 8.
exactly:
ACE is configured as end-to-end ssl with 2 rserver and with the sticky source address. When user is opening the virtual address from IEv7, the web portal (On Microsoft IIS) works fine.
If user opens the same web portal but using IEv8, the session is suspended after 60 seconds.
I think, that the reason is http keep-allive, which is sending every 60 seconds from the user's internet browser.
Here is some information about this. http://en.wikipedia.org/wiki/HTTP_persistent_connection
Do you have any idea how to resolve this problem: upgrade ACE, change the configuration on IIS or ACE ??
Please help.Hi Kazik,
Using a persistent connection or HTTP keepalives should not have any negative effect on the ACE, so, giving you a straight-forward answer to fix it is not going to be easy.
I would recommend you to open a TAC case to have this investigated further. When you do, please, provide the following data:
A showtech from the Admin context of the ACE
A traffic capture taken on the TenGig interface connecting the switch with the ACE backplane while doing a test connection (preferably one with IE7 and one with IE8 to compare)
If possible, a copy of the SSL private key. Being able to decrypt the traffic capture to look inside the HTTP flow would really make troubleshooting much easier.
Regards
Daniel -
Menu positioning problem when viewing in Internet explorer on a pc
Hi guys,
I have created a website for a football team and I am having problems with the menu. It looks fine in all browsers apart from Internet Explorer. The menu positioning is meant to be on the left hand side but shows far right on the screen when viewed in Internet Explorer. Does anyone know how I can resolve this issue?
http://www.stormersfc.co.uk
css sheet - http://www.stormersfc.co.uk/style.css
Hopefully someone can help.
Cheers,
RoyHummm....its difficult to tell. Youre using so many redundant css styles ie not needed.
Youre 'leftPan' <div> container is 140px in width but your ul (unordered list inside it is 244px wide?
Why set widths and heights when they are not needed. You have no idea what height the ul and li will be in other users browsers. A child element placed inside a parent container will stretch to the full width without specifying a width for the child element. The key to web deisgn is keeping all the maths 100% correct. If you so much as get anything out by even one px it could break the design.
#leftPan{
margin-left: 90px;
width: 140px;
#leftPan ul{
width:244px;
height:250px;
background-position: 0 0;
padding-top: 0px;
padding-right: 0;
padding-bottom: 0;
padding-left: 0;
margin-top: 1px;
text-decoration: none;
I see no reason why your based structure ie the 'container', 'header', 'mainpic', sidebar1 and 'mainContent' should not work in all browsers. Now what you have inside those may be casuing the conflict. I would strip the page back to the base structure (check that it does work in all browsers) then begin to fill the containers, checking as you go. -
Problems viewing site in Internet Explorer
Hi
I have created this site in muse works fine in all browsers except IE
http://www.bryanandemmaswedding.com/
Some screenshots below of the problems in IE the text doesnt appear at all and everything comes in as seperate elements> Appreciat a fast help
No help will be forthcoming until we can see the page in
action,
Link please
Also, a more descriptive, specific explanation will help.
Walt
"fsurrey" <[email protected]> wrote in
message
news:ggva09$bmc$[email protected]..
> Hi there,
>
> I have a very urgent problem as I am running out of time
and need any help
> please,
>
> I have a web site that I have just designed in
Dreamweaver, everything is
> totally perfect when I view it in Firefox, but when I
view it in Internet
> Explorer the trouble begins and without any reasonable
explanation, mainly
> I
> have an image which is a background image of a table
cell it is exactly
> the
> same table and image as I have used the same layout for
all my pages, but
> in
> some pages it appear clearly and in others in does not ?
>
> I am really scared as I have a deadline with no clue how
to solve this
> Appreciat a fast help
> Thanks
> -
History problem in jsp page,internet explorer back button
hi everyone
i have a jsp page suppose a.jsp.in which i am using dropdown menu to displays:list of data from database,one submit button i am using name select and click here.after selecting the value from dropdown menu ,again some other data will be displayed from some other table in same a.jsp page.
my problem is:
when user selects one value from drop down menu ,it is diplaying the value in same page .upto here is ok
and i click back button from I.E only one page back it is showing
but when user select the value form drop down menu 2nd time ,and after data get dipalyed in same apge a.jsp.then
whne i click back button ,now it is showing two a.jsp page .history is not going .
this is the problem.i dont want to this morw than one page get displayed in back button.only one page a.jsp
if anyone has understood my problem ,please help.
thankuthanks java2006
but it is not working .i will try to explain once again
1. one page called a.jsp.this page contains one drop drown menu list box ,and one submit button.
2.data in drop dropdown is coming from db.as the user select value from drop down box .relalted value is diplayed on same a.jsp page.
3.again user select the 2ndvalue from drop down box ,related value is displayed.
this i explained about my a.jsp page.
problem is
4.when user select the 1st value and clcik on submit button related value is displaying.upto here its ok.and in back button of Internet explorer it is showing only one a.jsp page
5.but whenever i am trying to see 2nd or 3rd or more value from drop down after related value is being diplayed in same a.jsp page.
the back button of internet exlorer showing two a.jsp page after clcicking submit button
.as u have told the code aso but it is not working
i have added ur code indisde html tags . -
Site problems in Firefox and Internet Explorer
Here's my site: http://davesnowgraphics.com/DSG/Home.html
Created in iWeb '08. Here is a list of problems. Solutions welcome.
1) In all browsers: links to internal pages open up in a new window or tab. As an internal link, the option to "Open page in a new window" is not even available. I therefore assume that they should open in the same window, but most open in a new page or tab.
2) In Firefox (both Mac and PC) the text spacing is messed up. Throws spaces in the middle of words and generally stretches text or letter spacing, making text returns seemingly at random. The fonts are all supposedly web safe (Trebuchet MS and Times New Roman).
3) Site is TOTALLY jacked in Internet Explorer. Transparency of linked images dumped, making intended graphics solid white. Also on the PC (I don't have the Mac I.E.), my text gets hijacked by random text links with those annoying pop-up boxes that lead elsewhere.
Is it possible for an iWeb-generated site to work in commonly-used browsers, or do I have to learn Dreamweaver?Okay, so I did some code experimentation and solved everything in my last post inquiry.
Seems the entire line *onclick="window.open(this.href); return false;" onkeypress="window.open(this.href); return false;"* needs to be removed from the javascript that iWeb generates when you have a link associated with a graphic. Pain in the butt, but it works.
Also did extensive searching for title= and manually changed the following text to what I wanted it to be.
I'm interested to know if these issues are resolved with the iWeb '09 update. Anybody know?
I also removed the graphics that I was using as links on the cubes. I put simple square shapes in the middle of the cube sides, made them transparent and assigned the link to them. They don't map the entire cube side as a link, but enough to make it functional. Also, for some reason, the fact that they're native iWeb-generated shapes and not placed graphics, they open up in the same page without having to delete the code line mentioned above.
Still no solutions to the following I.E. issue in my initial post.
I have the site open on my PC right now in IE. If you go to About > Services, the words "Business", "communication" and "Project Management" are green with double underlines. If I roll over them, I get a popup window with an advertisement for GameVance. What's up with that? Is that a setting in my local Internet Explorer properties that I need to disable? -
Problem serving video to Internet explorer
Hello and thanks in advance to all.
I am completely new to Flash Video and FMS, and have encountered a problem when using IE. Following Tom Green's 'Beginners guide to streaming video with Flash Media Server 3.5' I set up a video to be served from the following URL:
http://ilcec2009.lci.kent.edu/public_lecture.htm
The video is streaming fine (albeit slowly) on all browsers, (chrome, firefox, opera, safari) except, internet explorer. I have enabled Javascript, Active X controls, and just about every other security precaution I can select, un-installed and reinstalled Adobe Flash, on my local server and on four different machines, but I cannot get the video to function properly when using IE
Additionally, the Flash Media Server Administration Panel or Start Page are not fully functional IE, but it works well with all other browsers.
Can someone suggest why the video is not streaming using IE, regardless of the security settings? I can understand something not running on my local machine if the security settings are too high, but I don't understand why the video is not working when IE on other computers. YouTube works fine using other machines, but when I attempt to view the above URL, the video is not streaming.
Thanks again in advance for any help, and I will be happy to supply any other information
.paul luchetteIt sounds like you are experiencing problems with the Apple supplied Boot Camp drivers. This is a well known problem and one for which there is no resolution other than to plug a USB mouse into your laptop and use that instead of the TrackPad.
A lot of us have been on the forums complaining about this issue for 9 months and we still have nothing to show for it from Apple. -
When I'm in Firefox and try to forward an email in aol email I cannot access my contact list when I click on the to/bcc/cc . When I use Internet Explorer I have no problem accessing my contact list at all.
First make sure Settings > Facebook > Contacts is turned off. Tis might be different from what you described in your question.
Then open your Contacts app and check carefully what is there for your son and grand daughter's contact info. Correct if necessary. -
Problem downloading file in Internet Explorer
Hi, I have a problem with Internet Explorer. I want to click on a link that references a file with .dat extension, then select "Open" option and view the file in Notepad (I have the mapping with .dat files and Notepad). When I click on it, if I select "Save" option, the file is stored in disk correctly. But if I select Open opcion, Notepad opens with an error dialog:
Can't find file C:\Documents and Settings\TANDIL\Configuraci�n local\Archivos temporales de Internet\Content.IE5\LZR539BK\Mensuales.dat
Do you want to create a new file?
I think that IE doesn't copy the file correctly in temp directory ...
In my java class I set the response like this:
resp.setContentType("binary/octet-stream");
resp.addHeader("Content-Disposition", "attachment; filename=\"" + lote.getNombreArchivo()+ "\""); //el nombre de estos archivos son del tipo XXXXXXX.dat
OutputStream out = null;
try {
out = resp.getOutputStream();
} catch (IOException e) {
e.printStackTrace();
out = new java.io.BufferedOutputStream(out);
copy(lote.getArchivo().getBinaryStream(), out); // lote.getArchivo().getBinaryStream() : es un array de bytes que se copian en la salida
out.close();
I set the response in differente ways, but I can't solve the problem ...
resp.setContentType("application/octet-stream");
resp.setContentType("text/plain");
resp.setContentType("aplication/force-download");
Thanks in advance
RegardsHi,
I think you will get better answers if you post this question in a web related forum. The problem is not related to java but rather to http/html.
Kaj -
Yoga 2 - WIn 8.1 Update Problem!!! Internet explorer "This page won't connect"
Purchased a Yoga 2 13" last week running Windows 8.1
Everything was working fine until today. I downloaded Firefox. I'm not sure if that caused the problem. I uninstalled Firefox and the problem still persists.
I can connect to the internet. My email and Facebook are working fine. It is just Internet Explorer that won't connect.
I have rebooted my modem/router
Deleted the history and cached info for Explorer
I don't see any other settings about maybe working offline.
Any suggestions will be really appreciated.
Thanks,
Brian
Solved!
Go to Solution.It happens on other networks too.
I did a system restore and that solved the problem. Until the windows update went through again.
It is the update that is causing the problem.
This laptop is less than a week old. how can I figure out what in the update is causing the problem? -
Problems with iweb and Internet Explorer
I'm having trouble with my iweb website - PC users using Internet Explorer can access my site home-page but find the navigation bar is blocked - covered by a green rectangle which does not allow the links to be explored. With Safari and Firefox the website works properly. Has anyone else experienced this?
Transparency (opacity in CSS) is one of those things that's used by those who know nothing about it or those who know a lot about and is best avoid by all the rest of us!
To create a class "transparent" to cover all bets would require something like this...
.transparent {
/* Required for IE 5, 6, 7 */
/* ...or something to trigger hasLayout, like zoom: 1; */
width: 100%;
/* Theoretically for IE 8 & 9 (more valid) */
/* ...but not required as filter works too */
/* should come BEFORE filter */
-ms-filter:"progid:DXImageTransform.Microsoft.Alpha(Opacity=50)";
/* This works in IE 8 & 9 too */
/* ... but also 5, 6, 7 */
filter: alpha(opacity=50);
/* Older than Firefox 0.9 */
-moz-opacity:0.5;
/* Safari 1.x (pre WebKit!) */
-khtml-opacity: 0.5;
/* Modern!
/* Firefox 0.9+, Safari 2?, Chrome any?
/* Opera 9+, IE 9+ */
opacity: 0.5;
For modern browsers we can use this...
.transparent {
zoom: 1;
filter: alpha(opacity=50);
opacity: 0.5;
But how do we know what our visitors are using? -
Hi!
After a IE upgrade on my remote desktop server Java won't launch.
In IE, Active Scripting and Scripting of Java applets is enabled
In Java control panel, Java content in the browser is enabled
Java version is 7.45 and its been reinstalled several times.
I have also tried to downgrade Internet Explorer to version 9 and than up to 10 again.
Please help me :)This worked for me:
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/pdf-wont-open-while-running-ie10-on-windows-7/865a7ed2-ec94-4b77-a6e1-a9de6fb8f40a -
Problem displaying header in Internet Explorer
Hi,
I've been posting a lot lately as I learn Dreamweaver. Anyways, I'm using a default template with a header at width=100% height=auto. I've also got a banner (a jpg file) in the div. The header displays perfectly in Firefox 3 and Safari 4 and 5, but Internet Explorer 7 and 8 both cut the header off. I've tried adjusting dimensions and simply cannot make it appear. You can view the page and check the code at parodylyrics.net . Thanks in advance, I'd like to get compatibility with all major browsers soon.
RyanFrom your previous post I believe you're on a mission to scale the header to different browser resolutions.
You can make your divs adjust with % and auto but don't try it with your images.
Cross browser, you're going to have to put the actual image dimensions in the image tag for IE to behave:
<img src="../Images/banner.jpg" alt="Parody Lyrics" name="header_img" width="1115px" height="90px" id="header_img" /> -
Probleme de Flash et internet explorer
Bonjour,
avez-vous remarquer que maintenant pour aller cliquer dans un
menu flash(sur certaines pages de site web), ou des formulaires en
coldfusion version flash,
il faut maintenant cliquer deux foix, une foix pour entrer
dans l'objet (cela fait un rectangle a l'écran) et une foix
sur le bouton que l'on souhaite valider!
Y a t-il une solution pour éviter ce problème de
double clique.
(je suis sous windows en internet explorer 6, et le player
flash en 9)
mercicomme �a il peut aussi voir qu'il est de bon usage
d'insulter les gens qui
essayent d'aider. ahhh, les vacances, �a fait du
bien...
e-S-tampida
http://development.bbri.be/elearning2
(pre-release version V2.3.2)
A tous ceux qui ne lisent pas la documentation (livre ou F1)
http://development.bbri.be/ictp/flash/rtdfm.jpg
"ekameleon" <[email protected]> wrote in message
news:eav6d5$5o7$[email protected]..
> Hello :)
>
> C'est marrant que tous les d�butant du NG ne
prennent pas le temps de lire
> les derniers articles... vous �tes pas tout seul
sur terre hein ;)
>
> EKA+ :)
>
>> cedlannoy wrote:
>>> Bonjour,
>>> avez-vous remarquer que maintenant pour aller
cliquer dans un menu
>>> flash(sur certaines pages de site web), ou des
formulaires en coldfusion
>>> version flash,
>>> il faut maintenant cliquer deux foix, une foix
pour entrer dans l'objet
>>> (cela fait un rectangle a l'?cran) et une foix
sur le bouton que l'on
>>> souhaite valider!
>>> Y a t-il une solution pour ?viter ce probl?me de
double clique.
>>> (je suis sous windows en internet explorer 6, et
le player flash en 9)
>>>
>>> merci
>>>
>>>
>> post� et r�pondu plusieurs fois sur ce
NG !
Maybe you are looking for
-
Increase value in a variable (advance)
Sample code: positiveevent[0].titletxt="Found Treasure" positiveevent[0].descriptxt="Congratuation, you found a treasure chest within it there is"+ String (changeable) + "energy crystal" positiveevent[0].effect=changeval positiveevent[0].
-
External Hard Drive Installation to Extend DVR capacity
I recently purchased one of the recommended Western Digital 1TB SATA hard drives to extend our DVR capacity. When trying to install it, the DVR wouldn't recognize the drive. I worked through diagnostic steps with the Verizon Tech. Ultimately, they
-
How to use h:selectBooleanCheckbox in a datatable to select multiple rows
One way here is set a Boolean property like "isSelected" in the javaBean, and binding it with EL in jsp page which like this: *<h:selectBooleanCheckbox value="#{var.isSelected}"/>* but this break the a well EntityBean construction cause there is a nu
-
How to create custom project in LabVIEW 8
We can create VIs from the template in similar fashion i want to create a perticular folder hierarchy and copy some common VIs in perticular locations when i create a new project. as in 7.1(or even in 8) we had option to create blank VI or VI from t
-
How do I know if the safari browser is closed on the iPad?
How do I know if the safari browser is closed on the iPad?