Problem whith the preview , only black solid

I import my footage in ae but when i create a new composition there's no preview of my footage, how can i fix this ,pls?

As Rick says, we need to know a lot more if we're going to help you. Please provide answers to all of the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

Similar Messages

Why is the photo only black in Edit mode with iPhoto 11?

Why is the photo only Black in Edit mode?
Everything works fine, except when I try to edit a photo, it shows as only Black.
I have tried every fix talked about on this forum, and some others - nothing fixes it.
Is this a Feature ? or is it a bug that no one is interesteed in fixing? It doesn't fill me with confidence in Apple when I see such random little glitches remaining unfixed.

Is it the same for newly created slideshows? Although a long shot give this a try:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If the above fails as a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
If it doesn't then the following my be your next step:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac

Aperture 3: After sending my book for printing to Apple the Apple Store told me that my text and the background have the same color and they couldn't print the book. But I couldn't find any problem in the preview. How could I find the problem pages?

Aperture 3: After sending my book for printing to Apple the Apple Store told me that my text and the background have the same color and they couldn't print the book. But I couldn't find any problem in the preview. How could I find the pages where the problems are? Or otherwise, why doesn't print Apple the book how it is. Idon't need the text which couldn'be seen.

The forum is for Logic Pro users.. I will ask the moderators to move it to a more appropriate forum for your question/subject
Cheers..

I have problem whith the bluetooh whit OS X Mavericks The IMAC don't recognize the bluetooh

I have problem whith the bluetooh whit OS X Mavericks The IMAC don't recognize the mouse

Hi Alejofer,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting steps in this article helpful with troubleshooting bluetooth on your Mac:
Bluetooth Quick Assist
http://support.apple.com/kb/ht1153
Best,
Jeremy

Problem with the preview window in Premiere Elements 10

Hi guys,
I have a question:
I have a new PC (data follow) and Adobe Premiere Elements 10.
My problem is that I see in the preview-window only one grey picture. The sound runs without problems! In other chats I red, that perhaps my graphic card is the reson of my problam. Is this thus? If so, how I can repair this?
PC:
AMD FX-8350 Eight Core Processor 4 GHrz
NVIDIA GeForce GTX 750 Ti
Do you need even more?
What I have already tried:
- Adobe Premiere Elements 10 anew inst.
- Graphics drivers update
- Check DirectX
- Windows Media Player and QuickTimePlayer anew Inst.
Already to many thanks for your help!!!!!
lg
Börni

borni123
What computer operating system is your Premiere Elements 10 to run on?
You are involved in the Premiere Elements 10/NVIDIA GeForce issue whose full details (description and fix) are included
in the Announcement at the top of this forum. Copy for your convenience below.
You gave a lot of details but did not include the computer operating system. This information may be the key whether
the known fix will work for you. The known fix requires roll back of the driver version to about May 2013. If your computer
is Windows 8 or 8.1 64 bit, there may not be a driver old enough to resolve the issue. This may force you consider
a Premiere Elements version other than 10 or a different video card/graphics card for your computer. This issue is
specific for Premiere Elements 10 and the NVIDIA GeForce cards.
Copy of Announcement at top of this forum....
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this
applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary
to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working
Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is
expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver
roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
The following is the specific link in the above for determining what older NVIDIA GeForce GTX750Ti driver versions are
available to you.
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
Please update us on your progress,
Thank you.
ATR

Why do I see in the preview panel black edge on sides of imported jpegs into premiere CS5

We sized a jpeg in photoshop to 720 x 524 to import into premiere project frame size 720 x 480. Proportions all look good, but there is a black edge on each side of the jpeg in the preview panel. Will this show up when viewed on a tv screen once we create the dvd? On my preview tv screen, it looks like it will not show up, but I do not want to do this whole project that includes 50 jpegs and then have a problem? any good answers or things I should change.
Thank you

> I would have thought 540 myself to get a square pixel equivalent of 4:3 aspect ratio using 720 horizontal lines.
720x540 was the square-pixel equivalent before the correction that considers the difference between clean aperture and production aperture. In CS4 and later, it's 720x534.
There's a table of the square-pixel equivalents here. There are also presets in Photoshop that match this.

Problem with the preview of recorded audio

Hi lads! I'm running Logic 8 in my iMac, with a RME Fireface400 interface (connected through a Lacie external firewire hard disk), and I have a small problem.....
I'm trying to record audio using my audio interface. I can record audio into Logic with no problem, everthing works fine, but the recorded audio part just looks empty in Logic! It is really recorded, and it sounds, but it just look like an empty audio part.
If i close the project and I re-open it, the audio is prevosialized and it looks fine.
I know it is a small deal, but it can be very annoying! This thing happens since I bought the RME, but....it really looks like a Logic issue....
Is there any option like "auto preview recorded audio" in Logic? Does anybody know how to solve this little issue?
Thanks!

So what you are saying is that no overwiew of the waveform has been drawn? And that it has been drawn when you reload the song?
Open the region with the audio file in the *Sample Editor*, and choose *Refresh Overview(s)* from the *Audio File* menu in the Sample Editor.
regards, Erik.

Making the subject only black and white?

Still kind of new to AF (using AF CC) and here's one I can't figure out. I've been through the manual and the You Tube tutorials, but no help. I have a color shot of a room that a man walks through. I want the room to remain in color, but the walking man to be black and white (sort of a ghost thing I guess). Other then many hours of rotoscoping, is there a simple way to do this? That's it. Thanks for any help!

Try using Rotobrush to separate the subject from the background. You won't have a single bit of luck with Rotobrush unless you read up on it and run tutorials. In AE Help, use the search term rotobrush and a boatload of useful information appears.
Got the subject all rotoed nicely? Make the subject B&W and put it over the original color shot.

Problems with the Widget "Text Ticker"

Hello, I have a problem with the widget "Text ticker". I tried to put more then one text ticker on my site, but it doesn't work, when I look in Muse it looks like this:
and when I look in the preview only the first text ticker works...maybe it is not possible to have more then one text ticker on one site?
Thank you.

It seems you are using the same name for all the ticker instances on page.
You need to have unique names for each of the ticker you want on a single page. Tickers with duplicate names will not work.
Cheers,
Vikas

Preview turns black?!

So I've got a giant album from a vacation that I'm working on. I'm sifting through all the thumbnails of my raw files and picking ones I'd like to make some adjustments to. But sometimes something strange happens. I'll click on a thumbnail and start making adjustments. Then without rhyme or reason I go to make one more adjustment and the big preview turns black! If i undo the last adjustment it comes back. This has happened several times with this album but i have not had this problem before. And once, I was making adjustments but instead of the preview going black, it just stopped showing results of the adjustments. But the little thumbnail version was showing the results. Weird!
This happen to anyone else?

Cool, i have the older Dual (not dual core) 2.3ghz G5 so i believe it is the AGP/PCI-X, correct?
And wow, i can find some of these cards in stock but they are over $300. Even used on ebay! Any decent alternatives... a second best option? I've been meaning to replace my 9600 anyway since Aperture runs slowly for me right now.
Thanks!

Why can't I get the Preview application to open PDF files?

Since the end of April 2014, I have had problems with the Preview application. When I try to open Preview, I get the following message: "This application 'Preview.app can't be opened." "-1712.". I tried a recommended solution that I found in the Apple Support Communities, which said I could go to Finder > press the Option key to show Library and then go Preferences and then search for the Preview plist file and delete it.
Unfortunately, that did not work.
Two other Apple owners had the same problem and said the above procedure had worked for them, but post were back in the year 2012. When I followed the above procedures, it did not make any change in the problem with Preview. I still cannot open it. Does any one out there have an suggestions?
It is possible that any recent updates for MacBook Pro from Apple caused the problem? Will I forever have to resort to using Adobe's PDF program?

Hi aK'
Nice, memorable user name!
-1712 is a timed out error. One reported cause (with other applications) is that the application is attempting to open a large number of files, or a file that no longer exists.
Try holding down the shift key when launching preview. This prevents the application from attempting to open windows that were not closed before quitting the application.
Regards,
Barry

Problem whith Sales Quotation

Hello.
I have a problem whith the sales quotation form, because the form changes to update mode when i go the last register (the document number is over 992) in find mode or with the browser buttons. Do you know why is happening this ??
Thanks.
my SAP version is 2007

Hi,
Do you have any formatted searches on this form? These can force the form in to Update mode if you choose the option 'Refresh Regularly'.
Kind Regards,
Owen

Compressor2 Preview shows BLACK BOXES on LT & RT for 16:9 vd

My video project was shot on Canon XL2 16:9 Widescreen. I import the QT reference file into Compressor 2 from FCP5, in the Preview window, the Preview shows BLACK BOXES on Left & Right . Is it supposed to be like that in the Preview for a widescreen 16:9 video? If yes, cool. If not, how can I fix it?
Thanks once again,
Zia

Try this:
caveat
And to best understand what is happening, watch this:
How do I choose the right sequence settings?

I am unable to change my ringtone from default on my iphone 5 as well as the phone only vibrates and doesnt even play default ringtone.

Having just got iphone 5 through I have no end of problems trying to change the ringtone from default (marimba). I also have the problem that the phone only vibrates and does not even ring.I have seen posts with solutions and tried them but to no avail. Any ideas?

Thank you for your reply Lasina. The purchase was already verified by your
agents the day prior on my first call. They confirmed and noted that I paid
full price for the phone on that call. They admitted a coding error on
Verizon part and ensured that it would be corrected in 24 hours which was
in time for the pre order. .. however it was not. That's why I called a
second time. Yet the second called said they needed to confirm, like the
first call never happened. Now I am not able to pre order the iphone I
wanted and will need to wait weeks for a backorder (whether I decide to
stay with Verizon or not)
Thank you for your reply. What can be done at this point or what do I need
to do to get this cleared up. I can't afford to keep spending hours on the
phone and getting nowhere. Please help.
Thanks,
Jeff
On Sep 12, 2014 8:13 AM, "Verizon Wireless Customer Support" <

Problem whith the preview , only black solid

Similar Messages

Maybe you are looking for