Problem wireless connection Apple TV3 with wireless router.

apple tv version 3 connection to dd-wrt based router. Can not get pass the wireless password screen authentification. Have broadcast on, WPA2 personal with both both tkip and aes turned on, MAC filter off.

Hello DrKahanamoku
Start with the article below to troubleshoot issues with connecting your Apple TV over Wi-Fi. The second article will also give you more settings to check against for a proper connection.
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Regards,
-Norm G.

Similar Messages

Having difficulty connecting apple tv with amazon instant video

II'm having difficulty connecting apple tv with amazon instant video or it won't stay connected. Help!

Is it naive of me to think that Apple should simply provide a portal on their Apple TV menu for me to access my Amazon Instant Video movies?
Maybe a little. Amazon is a direct competitor, so it is not really in Apple's best interest to go out of its way to add support for a competing service that will cause Apple to lose money. The bigger problem though is all of these video services using DRM to encrypt their content and lock it away from consumers so we can only watch content we pay for on certain devices. Compaired to before when you could buy a DVD and watch it on any TV. Now when you buy content you can only using it on a few specific devices.
Is their failure to do so about an Amazon/Apple rivalry, or because the two have to make some kind of deal before this can happen
They are competitors, but a bigger issue is that it is an incredibility complex legal agreement they would have to work out. First there are legal agreements that would have to be worked out with literally thousands of copyright holders to distribute their content. Then there is the software licenncing since Apple and Amazon would have to disclose how their DRM encrption works, then there are pateint agreements that can be worth billions that have to be worked out. And all of that work would be so that they support a competator. So there is not a lot motivating them to do something that would cost a lot of money and time.
If watching Amazon content is really your major priority you might want to return your ATV and get a Roku.

Problem in configuring IPv6 interface with default Router lifetime.

I'm facing Problem in configuring IPv6 interface with default
Router lifetime through a router advertisement.
I'm also see an unusual behavior that even after configuring accept_rtadv=0,
the ipv6 address is configured.
Please help in out .

Mac OS 9 does not support IPv6. While you can have IPv6 on your network, a Macintosh running Mac OS 9.2.2 or earlier cannot make connections to services using this network protocol.
To use IPv6 on a Macintosh, you need Mac OS X 10.1 or later (as far as I know).
—tonza

I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

Your TV hasn't entered some odd picture in picture mode has it with two 'inputs' side by side?
AC

How to connect Apple TV with an iPad ?

How to connect Apple TV with iPad ?

Welcome to the Apple Community.
Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

HT1600 how may i connect apple tv with macbook air?

could you help me to connect apple tv with mcbook air ?

Welcome to the Apple Communityegc1.
The following article(s) may help you.
Understanding Home Sharing
Setting Up Home Sharing On A Computer

Apple TV3 with Apple remote

How to control volume in Apple TV3 with Apple remote?

you cannot, you need to use your TV/speaker remote or get an all-in-one remote like the logitech harmony ultimate

Problem getting connection to work with WRT54G and iPod Touch 4G

Hi, I just recently received a brand new iPod Touch 4G and I seem to be having connection troubles with it. This has also happened on my previous iPod (an iPod Touch 1G). This router has a pretty old firmware from like 2006. The problem is not that I can connect to the router and get the ipod to show the checkmark, but it is that I cannot get any network connection through the router. I have a Windows 7 laptop that connects perfectly fine using the router. Also, I believe my Nintendo DS Lite can connect flawlessly as well. I noticed that there seems to be a bit of trouble with Apple products connecting to Linksys routers in general. Does anyone know what may be causing my connection issues? When I got my iPod Touch 1G, it wouldn't connect from the get-go so I just ignored it and used the wifi at my university whenever I went there during the day.
If I need to provide any technical information, I can because I have access to the setup for the router. Thanks. :-)

Try changing the security mode to WEP and see if that works.
Open the setup page of the router.
Click on Wireless tab and go to Wireless MAC filter sub tab. Make sure that Wireless MAC filter is disabled on the router.
Try to upgrade the firmware on your router.
Connect the computer with the Ethernet cable to the router.
Download the latest firmware from Linksys website and save it on your computer. Open the setup page of the router. Click on Administration tab and go to Firmware upgrade sub tab. Browse the firmware file that you have already downloaded and upgrade it on your router.
After upgrading the firmware on the router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 10 seconds. Power cycle the router and reconfigure it.
Change some advanced wireless settings on the router. Click on Wireless tab and go to Advanced wireless settings. Change the Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.

Can't get Xbox Media Connect to work with WRT54GX4 router

My Xbox 360 and 2 computers all run through my WRT54GX4 router. They all use wired connections.
I can't get Media Connect to work so I can stream pics and videos through my Xbox.
I have the correct ports set up and enabled per Xbox instructions. but still no joy. When I go to the Media tab and select pictures, it will list my computer but when I try to select it, it fails to connect.
Note that when I go to Library, media sharing on my PC it does list the Xbox there and I have "allow" selected.
Is there a problem with this router and Media Connect? I am running the latest firmware.
Thank you,
- Chris

Thanks DT for the reply!
As noted, my Xbox actually is connected wired, not wirelessly.
I have all the ports open, but I am unclear on whether the IP address I enter into my router here should be for the *host PC* (in my case IP *.101) or for the Xbox (*.103). The Xbox instructions aren't crystal clear here... they just say the ports must be open for your computer.
I've tried it both ways and neither works, but would like to know which is correct so I can give it another go.
Thanks,
-Chris
P.S. - I've also gone through MS tech support (phone) to no avail.

Can you connect apple tv3 to itunes library without an internet connection?

I have an Apple TV3 and i am trying to connect it to my iTunes library on my computer. I have setup an access wireless point. Its a TP-Link TD-W8958. I dont have an internet connection on this wireless network becuase I am not living in my own house at this time and dont have a phone line however the guy at the Apple dealer store said i should still be able to connect my computer to the Apple TV3.
When i go to Computer on the Apple TV it says turn on Home Sharing and asks for my Apple ID. It says it cannot connect to the store which makes sense becuase of no internet connection but surely there must be a way to still turn on home sharing and connect with my computer.
Can anyone help?
Thanks
Mel

Welcome to the Apple Community.
Homesharing needs to check home now and again to verify your account. Unfortunately you will need the Internet in order to be able to use your Apple TV in that way.

How to connect apple TV with 2 Macs?

Hi!
I have connected/linked Apple TV with the iTunes library from my iMac (wireless). ..... Now, I have also downloaded some movies from iTunes on my MacBook. So I connected the MacBook (wireless) with Apple TV, but when I open Apple TV in iTunes on the MacBook I just get the choice of two tabs: +information and photos+. How can I move the movies?
I think it has something to do with streaming, but I don't know how to get there.
Thanks for any advice!

At the bottom of Movies on AppleTV, do you see My Shared Movies - these new ones will probably be seen there as a second computer will be streaming only and it's content is selectable under My Shared.
The top library in Settings>Computers is the sync/stream library, any below are streaming only and cannot transfer stuff to AppleTV only stream it live when the computer and itunes are running.
Assuming both computers use the same account on iTunes, you could copy the movies from the Macbook (Show in Finder - copy the files do not move them or iTunes gets confused - if you want to delete do it from within iTunes) and add them to the iMac library.

How to connect Apple TV with AT&T Uverse

Need help pls. Not sure how to connect Apple TV2 to AT&T Uverse. I know I need to connect one cable to my wireless router, and another cable from the HDMI port to my TV. That part is clear. But my Uverse router is in an upstairs closet, and my TV is downstairs in the living room - too far apart to connect cables to both devices from my ATV2. Do I need to somehow put a bridge router next to my TV, so that I can connect my ATV2 to both my bridge router and to my TV? Thank you

Welcome to the Apple Community.
Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

Problem configure linksys rage expander with dlink router

Hi...I trait to configure my linksys rage expander with Dlink router, but it's impossible..beacuase ..when using the automatic configuration ..it not work fine and when use cd wizard setup..show the messages 'can't find any divice...
Could any help me...please..

What model and versions is the D-link and the WRE ? does your D-link router support WDS ( wireless distribution system ) The WRE will only work with routers that support WDS.

I try to switch on my WiFi connection at home with ADSL router. Always I get the answer - Wrong password. The pasword used is correct. It works with another hardware.

I try to connect my iPhone with internet through WiFi with ADSL router. My network is visible. When I try to connect it, I write the password and I get always one answer - WRONG PASSWORD. The same password works perfectly with other two computers and other smartphone.

Did you already try to reset your network settings on the phone in Settings/General/Reset/Network settings ?
More Wi-Fi troubleshooting here: http://support.apple.com/kb/TS1398
Message was edited by: Ingo2711

Help with connecting MacBook Pro with Cisco Routing and Switches?

I'm running a CiscoASA 5510 router with several Cisco WS-C2960-48TT-L switches on a local network to connect with MacBook Pro. I need to be able to restrict access to specific users via their computer MAC address. ie: Joe Blow is limited to connecting through Switch 1 on port 10 and anywhere else he tries to plug in will simply not work.

You need to look at the documentation that came with your router and switches. Or ask your network admin to set it up. Your question has nothing to do with your Macbook Pro configuration. MAC filtering is done in the router not in the computers/devices connecting to the router.

Problem wireless connection Apple TV3 with wireless router.

Similar Messages

Maybe you are looking for