Problem witch Anyconnect - Reading computer certificate

Hi everyone.
We are having an issue with our Windows 8.1 domain computer and Anyconnect.
We have deployed computer certificates to all our domain computers, and use them for our wireless networks, which works great.
When Anyconnect is started as a domain user, it wont allow us to connect using the machine certificate. We get an error message saying: "Certificate validation failure" and the message history says: "No valid certificates available for authentication".
If we run anyconnect as an administrator, there are no problems, and the connection is established right away.
We have tried giving domain users read access to: HKLM\software\microsoft\systemcertificates, but it didn´t help.
We have tested the same setup on OSX Yosemite, and there it works fine.
We have had succes deploying a user certificate to the user(Windows 8.1), but we will prefer using the computer certificate.
Any ideas? If you need more information, please let me know.
Best Regards

From: http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect31/administration/guide/anyconnectadmin31/ac03vpn.html
"In the Preferences (Part 1) pane of Profile Editor, use the Certificate Store list box to configure in which certificate store AnyConnect searches for certificates. Use the Certificate Store Override checkbox to allow AnyConnect to search the machine certificate store for users with non-administrative privileges."
Rob.

Similar Messages

Unable to enroll Computer certificates on Server 2008 R2 and older

I've found a strange issue with our CA setup, and it didn't used to be a problem. While renewing some internal certificates a couple of months ago I discovered that systems of the Windows 7/Server 2008 R2 and older families cannot enroll for a Computer
certificate or for a custom template I built for web servers. Systems of the Windows 8/Server 2012 and newer families can enroll using the exact same user and process without any trouble. Direct IIS "domain certificate" enrollment still
works.
I'm enrolling with the Certificates MMC snap-in to allow use of the enhanced security template I built. I open MMC, add the local computer certificates snap-in, and then attempt to request a certificate with Personal > Certificates > All Tasks
> Request New Certificate. I choose the Active Directory Enrollment Policy but then get the "Certificate types are not available" error message and a blank selection screen. If I check the box to show all templates the certificates
I want are listed with:
"The permissions on this certification authority do not allow the current user to enroll for certificates. A valid certification authority (CA) configured to issue certificates based on this template cannot be located, or the CA doesn't' support this
operation, or the CA is not trusted."
I've checked Event Viewer on both the CA and the clients, along with the CA request logs, but there's nothing visibly wrong. The error message seems to say it all but since Windows 8/2012 clients and newer work I know the CA is functional and that
the Administrator account can request certificates. I've searched the web but can't find anything like this specific issue.
Any ideas?
Thank you!

Hi Amy.
Domain Admins and Enterprise Admins have Read/Write/Enroll. Authenticated Users have Read.
I also created a copy of an existing certificate (Web Server) but am unable to see it when I go to New > Certificate Template to Issue. Our domain has had plenty of time to replicate the copied template.
I don't recall making any changes that would have affected a computer's ability to enroll. There has been some Group Policy work done and a new certificate template was created and marked to issue, but this problem was picked up by accident when I
went to generate internal certificates back in October. All administrative work is done as the domain Administrator account.
We didn't have issues with this CA when it was first built, so something did change. We don't have a large PKI environment, just some internal web sites, so if it comes to it I may just start over with everything. When we moved to Server 2012
on this system it was an upgrade from a Server 2003 CA that was never properly used or maintained. It may be better just to clean everything and get one consistent root certificate again.
Alan

Reading Mozilla certificates from an applet

We have a web application that only works in Internet Explorer.
It is a page that downloads the CAPICOM.dll and an ActiveX so we can read the Client certificates registered in Internet Explorer browser.
But we want this web application to be accessible from Mozilla and Netscape. So in this case we think it is necessary to create an applet, and this applet might be capable of read the certificates registered in the Mozilla - Firefox - Netscape browser.
There is a file called NSS.dll that is in charge of it for this browser. There is a Java wrapper called JSS (jss.jar file) that dialogs with it.
But when we try in the applet something like:
CryptoManager.initialize(dbdir);
CryptoManager cm = CryptoManager.getInstance();
X509Certificate[] certs = cm.getCACerts();
there is a CheckPermission excepcion because of a loadNativeLibraries call to NSS
How to resolve it? Is there any othe way to get the client certificate list from the Mozilla browser?
There is another question, too:
Witch would be the value for dbdir when calling CryptoManager.initialize(dbdir)? "secmod.db"? "key3.db"? "cert7.db"? "."? other?
Thank you very-very-very much
Robertico

For accessing Native libraries from Applet here is the link
http://www.javaworld.com/javaworld/jw-10-1998/jw-10-apptowin32.html

Problems transferring to new computer. Is Win 8.1 problem?

Problems transferring to new computer. Is Win 8.1 problem?

Hello wjmonti
What issues are you having for moving your music to a new computer? Check out the article below for different ways to move your music to your new computer.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Regards,
-Norm G.

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Problems witch channels to the FICON SAN switches

We have some problems witch channels to the FICON SAN switches: channel 56 on Mainframe1 to switch 5B5 (FDBELF5C1_VSAN500_DISK) and channel 28 (on Mainframe1) to switch 5B7 (FDBELF5C1_VSAN510_TAPE). Forr Mainframe2 the channels are 35 to 5B5 and 37 to 5B7.
Hereby an example for switch 5B5 and channels 56 (BAD) and 43 (GOOD):
---> command: D M=DEV(5B5)
IEE174I 10.21.40 DISPLAY M 494
DEVICE 05B5 STATUS=ONLINE
CHP 56 43
ENTRY LINK ADDRESS 6543 655B
DEST LINK ADDRESS 75FE 75FE
PATH ONLINE
N YCHP PHYSICALLY ONLINE Y Y
PATH OPERATIONAL Y Y
MANAGED N N
CU NUMBER 05B5 05B5
MAXIMUM MANAGED CHPID(S) ALLOWED: 0
DESTINATION CU LOGICAL ADDRESS = 00
SCP CU ND = 0MDS9K.513.CSC.1F.00059B7ACEC4.00E0
SCP TOKEN NED = 0MDS9K.513.CSC.1F.00059B7ACEC4.0000
SCP DEVICE NED = 0MDS9K.513.CSC.1F.00059B7ACEC4.0000
When one tries to put the path online then the following error messages are seen:
---> command: VARY PATH(5B5,56),ONLINE
IEE386I PATH(05B5,56) NOT BROUGHT ONLINE
IEE763I NAME= IOSCCMSG CODE= 0000000800000032
IOS291I CONFIGURATION DATA COULD NOT BE READ ON PATH(05B5,56) RC=32
DEVICE SUPPORT CODE DETECTED INCORRECT CDR DATA
IEE763I NAME= IECVIOPM CODE= 0000000400000000
IOS554I CONFIGURATION DATA PROCESSING FAILED
IEE764I END OF IEE386I RELATED MESSAGES µ
We don't think that the problem is port related but switch related!
For the moment problems are present on only one of our 4 mainframe SAN directors. Firmware level of the directors was changed 3 weeks ago to NX-OS 4.2(7b).

Problem solved after IODF weekend.
Channels were toggled.
Rgds,
Ivy

Computer certificates expiring within 6 weeks disappearing from machines when computer certificates from two certificate authorities are present

2008 R2 single tier enterprise certificate authority with root certificate expiring within 6 weeks, also domain controller
2012 R2 single tier enterprise certificate authority with root certificate valid for more than the next year, also domain controller
Both servers are approved as certificate authorities for the domain and can issue computer certificates using the computer certificate template. There is a group policy object applied to all workstations that contains an automatic computer certificate request,
but the actual "certificate services client auto-enrollment" element is "not configured". This process seems to work like a round robin in that computers with no certificate can wind up with a certificate from either certificate
authority. I need all PCs to have both certs for a DirectAccess migration. I have successfully used SCCM to ensure all PCs have both certificates using compliance rules and a script using certreq.exe.
A machine will keep both certs until the older computer certificate moves into the 6 week window of expiration, then it gets purged. I have observed this behavior for over a month, even when the CA root certificate wasn't so close to expiring. I
can't figure out what setting is triggering the purge, but need to stop it. Maybe it's coming from default settings in local machine policy for an element that should be disabled in the group policy object supplying the automatic certificate request?
The worst part of this issue is that I can't recreate the purging behavior with gpupdates or restarts on my test machines.

You should not be using Automatic Certificate Request Service (ACRS) for this - it was designed for Windows 2000 and is generally deprecated. Secondly, the reason it is acting like a round-robin as you describe it, is that templates are generally configured
to attempt to renew within 6 weeks of their expiration. Since the 2008 R2 CA is expiring within 6 weeks, it cant issue anything longer than its own remaining lifetime. It is a well known issue that issuing a certificate within the renewal period will cause
problems.
What you should do it use AutoEnrollment and issue a certificate with a very small renewal period (1 week perhaps) by creating a custom V2 template and issuing that from your 2008 R2 CA. Then on the 2012 R2 CA you will need ANOTHER template, as the computer
will only enroll for a certificate from each template. This one can be configured with a normal lifetime and renewal period.
Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years. Connect with Mark at http://www.pkisolutions.com

802.1x ISE with computer certificates

Hello,
I'm trying to configure 802.1x policy on Cisco ISE (v1.2.x) which will authenticate devices using computer certificates.
i have configured the AP and the policy on the ISE server and when i'm trying to connect i'm getting an error message says:
"11514 Unexpectedly receive empty TLS message; treating as a rejection by the client"
Did anyone encountered this message with this kind of setup?
Thx,
Tal

You didn't revealed even the basic things like the OS you have on client machine. It mean you have a version of Windows. Unfortunately, I'm no windows expert.
Your client needs to recognize Cisco ISE certificate as trusted. Root CA needs to be placed in appropriate certificate store - the machine store if you are configuring machine-level authentication, or the user store if you are configuring user-level authentication. Or elsewhere according requirements of your authentication client. Consult the documentation related to your OS and it's client setup. If there is a intermediate certificate then it needs to be delivered from server side to client during TLS handshake.
I wish a more skilled Windows user will give you better advice. I'm familiar with the principles, but I don't know where to click in Windows.

Require Computer Certificate And user credentials

Hi All,
I'm trying to test 802.1x authentication in a lab environment with some standalone 1131AGs and a Server 2008 R2 NPS server. I've been able to set up a few different scenarios but none have met all my requirements:
Scenario 1:
Laptops in the domain automatically get certs from a GPO
Laptops in the domain automatically get an SSID configured from a GPO
Laptops in the domain automatically authenticate using their computer certificate.
Problem:
I can't add non-domain computers to this network. I've tried installing computer certs using Windows 2008 R2's certsrv CA web portal but these types of certs don't seem to work.
Scenario 2:
Same as below except I provide non-domain computers with a user certificate which they can request through Windows 2008 R2s certsrv CA web portal.
They can connect BUT they can export the private key and put it on other devices or give it to their friends, etc.
I'd like to figure out a way to ensure certificates can't be exported or at least require a user cert and a username and password to get onto the wireless network. Is this not possible with EAP-TLS or PEAP-TLS?
Thanks!

Yon,
Moving this to AAA forum.
Thanks,
Vinay Sharma
Community Manager - Wireless
Cisco Support Community

Request through http, but I cannot get a Computer certificate

Hello,
From a client I type in my browser: http://dc1/certsrv.
Then I get to a screen where I can choose among these certificates: User, Basic EFS, Administrator....and a few more ; but I don't see "Computer certificate" in that list.
Does anyone know how could I get a Computer certificate from that web site ?.
As far as I know, one can add entries to that list, but not sure how to do it.
Thanks in advance!
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)

Computer certificate enrollment in web pages is deprecated since Windows Vista. Instead, you should use Certificates MMC snap-in focused on Local Machine context to enroll computer certificates.
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell FCIV tool.

TS1406 having problems installing itunes on computer so I can sysc with iphone. had to download only then installed itunes. getting error trying to install AppleMobileDevice64.

having problems installing itunes on computer so I can sysc with iphone. had to download only then installed itunes. getting error trying to install AppleMobileDevice64.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Mobile Device Support entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Priemere Pro consistantly crashed upon export, I cleaned media cache and that seemed to help. Now export errors unknown problem... read to uninstall and reinstall and now I can not open up PPCS5

Here is my problems with Premiere Pro CS5
When I export a project... the computer crashes.
I was able to get a tech chat and they would clean the media cache
so I did that.
Then, I got an export error "unknown problem" I then read in a forum to uninstall and reinstall Premiere pro
Now on my very nice relatively newer IMAC, when I go to applications to open it... I can not find a purple tab to open it. It just has a presets folder, then open that and it has styles, templates, textures but, now little purple Pr to open or drag to my dashboard.
Help PLEASE!!! I have wasted 20 hours of editing time, and work because of crashes, and problems.

Here is my problems with Premiere Pro CS5
When I export a project... the computer crashes.
I was able to get a tech chat and they would clean the media cache
so I did that.
Then, I got an export error "unknown problem" I then read in a forum to uninstall and reinstall Premiere pro
Now on my very nice relatively newer IMAC, when I go to applications to open it... I can not find a purple tab to open it. It just has a presets folder, then open that and it has styles, templates, textures but, now little purple Pr to open or drag to my dashboard.
Help PLEASE!!! I have wasted 20 hours of editing time, and work because of crashes, and problems.

Problems downloading Adobe Reader to Firefox

The problem is that the I cannot locate an Adobe Reader file that I can download into a folder on my computer. All of the downloads indicate that they will download and install on my computer automatically. If they did, then when the computer was restarted, the Adobe Reader probram would no longer reside on my computer. It would have been deleted by a program installed to do just that, unless it was disabled to allow for and install. This program is a major part of my protection from all the unwanted files I seem collect while using the inernet.
What I need is an Adobe Reader file that I can download into a specified folder, then searched for for fuzzy coding. Then I would disconnect from the internet, disable my protection program and install the program. Then reactivate the protection, and use the program from then on.
Question is where can I download a file directly into a folder without it automatically executing.
Downloading any file without my protection activated, will never happen.
Thanks in advance
Martin1900
Note: Adobe website seems to loop back on itself when checking for problems with Adobe Reader downloads.

Try following forum:
http://forums.adobe.com/community/adobe_reader_forums/android

Good morning , I bought my mac pro 13 ' in 2011 (OX 10.10) , in March 2014 I had to replace the video card , fortunately under warranty. Today, after only eight months starting with the same problems ! I read online that some mac products in 2011 wer

Good morning , I bought my mac pro 13 ' in 2011 (OX 10.10) , in March 2014 I had to replace the video card , fortunately under warranty.
Today, after only eight months starting with the same problems !
I read online that some mac products in 2011 were put on the market defective , you can get a warranty extension or even a replacement mac?

dubem747 wrote:
It looks like your phone has a some virus, use your computer to scan and remove it.
not possible for it to have a virus and a PC would not know how to scan the OS as its protected
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

did ae install without problem? check the install logs to be sure (Troubleshoot with install logs | CS5, CS5.5, CS6, CC)
if it did, what do you see when clicking the executable?

Problem witch Anyconnect - Reading computer certificate

Similar Messages

Maybe you are looking for