Problem with 0CRM_SALES_ACT_1 to extract activities

Dear all,
I try to use data source 0CRM_SALES_ACT_1 to extract activities but I found the extraction function CRM_SALES_ACT_1_MAP exclude TASKS (BUS2000125). I searched in SAP support portal and SCN and I found the note 1907486 and 669436. I applied both. I reactivated the data source and the function but I am still not able to extract any TASKS from the activities when I run RSA3 using data source 0CRM_SALES_ACT_1. I wonder does anyone had the same issue even after you applied both notes.
Currently I am running CRM 7.0 EHP3
Thanks.

Hi Lado
Check the following note:
1907486 - Tasks and Interaction Records are not extracted via DataSource 0CRM_SALES_ACT_1 after EHP2.
That should do the trick.
Rgds

Similar Messages

Problem with Text data Extraction from R/3

Hi Experts,
The problem is extracting Text data from R/3 system.
Actually its an delta load.The load is running fine....but it is not bringing any data from the source system (R/3)0 Record.When I checked the table in R/3 system the data are there.
I tried with Fullupdate too, still its bring 0 record.
What will be the solution for this?
Thanks in Advance!
Regds,
SPS

Hello SPS, I cant remember very well, but when we found this issue, the problem was Language key. There was a problem with standard datasource.
Did you try to find any notes for your datasource ?
Hugs,
Bueno

Problem with POI Powerpoint extraction

Hello I am trying to extract text from a ppt file. I am using Coldfusion.
Here is my code:
<cfscript>
     function func_PPTToQueryStruct_POI() {
          var Files = "C:\CFusionMX7\wwwroot\google\Library\References\Army_UAV_brief.ppt";
          var fileIn             = CreateObject("java","java.io.FileInputStream").init(Files);
          var Extraction             = CreateObject("java","org.apache.poi.hslf.extractor.QuickButCruddyTextExtractor").init(fileIn);
          var Extraction1               = Extraction.getTextAsVector();
          return Extraction;
</cfscript>The problem lies with this statement "var Extraction1 = Extraction.getTextAsVector();"
I have successfully used this method with other jar previously yet I keep getting this error:
"500 org.apache.poi.util.StringUtil.getFromUnicodeLE([B)Ljava/lang/String;"
Is anyone familiar with using jar to extract text from ppt files?
I appreciate it.

Hi,
Did u enter the right datasource name that you created in RSA3?
So, pls check the correctness for the datasource name.
Also, revisit the steps that you followed to create the Datasource.
Thanks,
Raj
Message was edited by: Raj
Message was edited by: Raj

Problem with Audigy self extracting file for Vi

I have downloaded the latest Vista driver for the Audigy 2, which is a self
extracting file. When I run it, I always get the same error message:
file error[@s]crc,0xc50a2d5:0x0d8c70c
and then the process aborts. When I download and run the file on my XP
machine, it runs just fine and brings up the installation program. Any ideas
on how I can get this thing to run under Vista. I went this route because I
was never able to get the onboard Realtek '97 audio to work. Under that
scenario, Control panel says the device is working properly and there are no
conflicts, but the speaker icon in the system tray has a red x over it, and I
get no sound. I would gladly accept a solution to either problem so I can get
the audio working.
Chuck

Ok, I've edited the VI you posted to reproduce my error (this time with 8.0).
I added a "master stop" and "start log" button. To demonstrate my problem:
1. Run the VI
2. Click "START LOGGING" - c:\test.txt is created
3. Click "STOP" - c:\test.txt is closed
4. Delete the file c:\test.txt with Windows shell or explorer
5. Click "START LGGING" - a new c:\test.txt file should be created but instead an error is raised in the Write LabVIEW Measurement File function.
Any ideas?
Thanks,
Dave
Attachments:
Write LV Meas File 2.vi ‏96 KB

Problems with real-time extraction from generic datasource.

Hello,
I have a real-time extraction from generic datasoruce with numeric field as a delta pointer. I have created an initilization infopackage, delta IP and real-time IP, real-time data transfer process, real-time deamon. The problem is that real-time extraction does not see delta updates. Deamon creates requests in PSA every minute, but there are all empty. When i delete the deamon and shedule not real-time delta infopackage, it loads delta records correctly. Version of BI - 7.0 SP 18.
The second question: a cannot stop real-time deamon. I stop it in RSRDA, but when i try to shedule standart IP, i get an error, that deamon is still running. So i have to delete it and recreate.
And the 3rd question, theoretical. What real-time extraction is necessary for? As i understand, i can create a process chain that will be sheduled every 1 (5, 10, ...) minute. What are advantages of real-time extraction rather such variant?
Thanks.

Hi,
1.Note 1113610 - P17:SDL:PC:RDA:Daemon runs: Do not start delta/init IPackage
Summary
Symptom
When a daemon runs or is scheduled, you may not start a 'normal' delta/init InfoPackage.
Other terms
RDA, real-time data acquisition, daemon, InfoPackage, scheduler
Reason and Prerequisites
This problem is caused by a program error.
Solution
SAP NetWeaver 7.0 BI
Import Support Package 17 for SAP NetWeaver 7.0 BI (BI Patch 17 or SAPKW70017) into your BI system. The Support Package is available when Note 1106569 "SAPBINews BI7.0 Support Package 17", which describes this Support Package in more detail, is released for customers.
**********you can apply the correction instructions provided in the note
2.i refered closing of the request in the target i.e DSO not psa.
3. Note 1000157 - RDA daemon does not get data from delta queue
Summary
Symptom
You use Real-time Data Acquisition (RDA) to load data from an SAP source system. After several hours or days, the system no longer reads the data from the delta queue. In the RDA monitor, you can see that the InfoPackage has been executed, however the data transfer process (DTP) has not been executed for a long time. In transaction RSA7 in the source system, you can see that there is already data in the delta queue.
Cheers,
swapna.G

Problems with Partner determination in activities generated from call list

In our scenario we are using IC Win Client 5.0.
During the generation of the call list it to my understanding that when a call is scheduled for a Business Partner a corresponding activity is created and linked to the call. It is in this process that the partner determination procedure for the linked activity kicks in and should determine the BP from the sceduled call and fill the field 'Sold-to-Party' in the activity.
However this is not working!! I have tested basically all of the standard access sequences for the partner determination procedure and I haven't been able to do it.
By using standard access sequence 0019 I was able to determine the BP using the relationship, however when opening the generated activity an error ocurrs that states the following message: 'Only one partner function of function category Sold-to-Party is allowed'.
Whats really odd is that if we erase the Sold-to-party field leaving it blank and press enter, the contact person is filled in the same field! It seems like something is missing in the procedure or the way I use the access sequence.
Please help!
Thanks in advance,
Pedro

Pedro
For activities you should not determine SoldToParties, but rather Activity Partners. Please have a look at the standard partner schemes for activities, to see which partner functions are usually used for activities besides the activity partner.
If you have to use soldtoparty partner functions, please take into account that they have special checks enabled.
The system fills in the organization instead of the contact person, esp. if no contact person exists: In R/3 you can have non-reflexive partner functions, but in CRM these are not saved. Instead in partner determination if no target can be found the origined partner itself is used as a result. That is why the organization is put into the result instead of the contact person.
HTH - Kai

Problems with Delta Extraction for 0CRM_OPPT_H (no data found)

Hi,
I've some problems with the Delta Extraction of the Infosource 0crm_oppt_h (CRM Opportunities Header). After initialization I get no delta data from the CRM system.
What I already did:
Activated 0crm_oppt_h Data Source (checked functionality with rsa3)
Started Info Package (Init) on BW side (worked fine)
Checked the status of the Data Source on the CRM system using BWA7 ("initial upload" is unmarked; "delta active" is marked and what makes me worry is that the column "Queue exists" in <i>unmarked</i>...)
If I change anything (like Phase, Expected Sales Vol.) in the opportunity, the Delta Extraction get no changes.
Could You help me out, please?
Best regards,
Markus Svec

hi Markus,
try to check oss note 788172
Release Status Released for Customer
Released on 23.03.2005
Priority Correction with high priority
Category Program error
Symptom
No data exists in delta extraction from the CRM server to the BW system for business transactions, if parallel processing is applied as per note 639072. But Data is extracted if parallel processing is switched off.ie. when BWA_NUMBER_OFF_PROCESSES is set to 1,there is data during delta. This applies to the following DataSources:
0BBP_TD_CONTR_1
0CRM_COMPLAINTS_I
0CRM_LEAD_ATTR
0CRM_LEAD_H
0CRM_LEAD_I
0CRM_OPPT_ATTR
0CRM_OPPT_H
0CRM_OPP T_I
0CRM_QUOTATION_I
0CRM_QUOTA_ORDER_I
0CRM_SALES_ACT_1
0CRM_SALES_CONTR_I
0CRM_SALES_ORDER_I
0CRM_SRV_CODES
0 CRM_SRV_CONFIRM_H
0CRM_SRV_CONFIRM_I
0CRM_SRV_CONTRACT_H
0CRM_SRV_PROCESS_H
0CRM_SRV_PROCESS_I
Other terms
DataSources, BWA, initial extraction, delta init, parallel processing, no data in delta.
Reason and Prerequisites
There is an update on the generated delta table which causes data corruption in running delta initializations as the changed delta sets will be deleted with every further update on documents. An open cursor statement is there without fetch data in SMOX3_GET_DATA.
Solution
The problem is solved with the attached corrections.After applying the corrections a new initialization of the affected datasources is necessary.

Problem with checkin activity

Hi All,
I have problem with Checkin and CheckOut activities while I am trying to work with BAPI's.
I have an iView that is deployed on the portal server. Initially when I am trying to make changes in the iView, they were getting effected in the server. But, once I had created a model and started using BAPI's I could not CheckIn properly and activate. So, the changes are not getting effected. It is asking for "ACTIVATE WITH ALL PREDECESSORS" and even when I asked to do so, the changes are not getting effected. Also, I have tried it many a times and still all the previous checkin activities are persisting and I couldnt workout with the changes.
Anyone would please check the problem and give me a solution.
Regards,
Murthy.

Hi Sandip,
The dc is build in the local environment when you do a DC build. The build uses the jars from DCs,SCs in local dummy track in NWDS.
When you do a dc build in NWDS you gets a build log. You can check what are the errors which are causing the problems.
Similarly, the dc's in repository (DTR) are build using the CBS (build service). Check in CBS build log what are the errors. Whenever you submits an activity and mark to be activated, CBS build is triggered. Hence there is build log for each activity marked to activated. Check in the build log what are the errors.
Its realy hard to identidy what are the specifc problem in your case.
There can be
- Some file not submitted and causing build failure
- Some dependency (jars from DCs,SCs) missing on the DTR track
- Compile Problems in the java code
- or anything other.....
Ensure that build is fine. You will be able to see the changes if you deply application from CBS,CMS then.
Regards,
Ashwani Kr Sharma

Problem with Real Time Data Acquisition

Hello,
I tried to built a RDA data flow according to the SAP-Help and this blog (/people/kamaljeet.kharbanda/blog/2006/11/13/real-time-data-acquisition-bi2004s), but I ran into a problem. Everything seems to be fine, but even though the daemon is running no new data is added to the DSO. I'll explain in detail what steps I took and hope someone can pinpoint my error(s).
System is BW4 on SPS 17. My datasource as well as my DSObject are in the same system
1.) Created a transparent table with a timestamp-field for generic delta as a local object.
2.) Created a generic datasource from view/table (used the above table), marked it as realtime-enabled and used timestamp as delta-specific field.
3.) Replicated the metadata for my datasource and activated it.
4.) Created a Data Storage Object with infoobjects corresponding to the table fields
5.) Created a transformation between DataSource and DSO
6.) Created a DTP from Data Source to DSO. The type is realtime-DTP.
7.) Created an InfoPackage for Delta-Initial Load. Update mode: Initialize Delta Process -> Initialization with Data Transfer.
8.) Then I changed my DTP (step 6) to "normal DTP" and executed it. Then activated the data in the DSO. The datasets from the table (which i filled with an ABAP-program) were successfully loaded and activated. So now my DSO contains 5 datasets.
9.) Changed the DTP back to "realtime DTP"
10.) Created an InfoPackage for RDA. Adapter is set to "Realtime extraction from SAP System"
11.) Created a daemon, assigned the IP for RDA and the DTP to the daemon and started it up.
12.) Executed my ABAP program to added 3 datasets to the table which is used as a datasource.
So now in my source table there are 8 datasets, but the daemon won't load them. In my RDA-Monitor (trx rsrda) it shows my daemon, the assigned IP and the assigned DTP (status green). Under the IP there's one yellow request (that should be right according to the help), but unlike the picture in the blog (link see above) there's no request under the DTP.
Job overview (sm37) shows an active batch job and some jobs that are ready (every 10minutes a new batch starts and the old one is closed). the job log shows, that the daemon runs, but loads no data...
i think it might be a problem with the delta extraction somewhere, because the intial load works fine and there are no errors anywhere.
Edit: perhaps my settings in the data source unter tab: extraction are wrong?
Delta process: AIE After Images By Extractor (can't change that)
Direct Access: Allowd
real Time: Real-Time DA Supported
Adapter: realtime data extraction (also tried Access to SAP Data through Service API which seems senseless)
Data Format: Fixed Lenght
Anyone can explain what those fileds mean and which one i should use?
Edited by: Christoph Jender on Apr 10, 2008 2:48 PM
Edited by: Christoph Jender on Apr 10, 2008 3:33 PM

Hi again, another thing i'd like to try is to just active a business content datasource which is realtime-enabled and has the ability to dynamically add some values so that i can test if it works. but i have no idea what business content would be applicable here, any ideas on that perhaps?

Problem with Mars J2k Images

Hi there
I have a problem with viewing the extracted images from a PDF
Doc
After saving the PDF Doc into the Mars Format, and then
extracting into folders I see the images
from the original PDF are converted to the J2k format , I
have tried several viewers but none are
able to open the images !
Any ideas?
Thanks a million

Hi,
Reading your message, I'm not 100% certain whether you are
asking if there are any viewers capable of displaying JPEG2000 or
if you are saying that compatible viewers can't display the
JPEG2000 we produce.
If you are just looking for a viewer, IrfanView (a freeware
image viewer) can display them (though you have to download a free
image compatibility pack from their site). It is also my
understanding that there is a free JPEG2000 plug-in included with
Photoshop CS4, which is capable of viewing and converting JPEG2000
files (though it is not installed by default).
If you have tools which you think are capable of viewing
JPEG2000 and are still having problems with our images, please let
me know.
Thanks,
Matt
[Edit: Update information and fix minor typo]

Extracting Open Items : Problem with mass activity FPBW

Hi everybody,
I need to extract Open Items in BW. I use the extractor 0FC_OP_01 which extract the content of table DFKKOPBW in OLTP. Open Items are written in table DFKKOPBW by the mass activity FPBW.
I have a problem with this mass activity : the field "Business partner number" stay empty in table DFKKOPBW after the execution of FPBW, whereas it's not empty in table DFKKOP... (and for the cleared items it works...)
Does anybody have a solution for my problem?
Best regards
Aube

hi buddy,
go to SBIW go to the setting for application specificdatasourse in that go to contact account recivable, click the fileds for extrction add the field the data to see in to dffkopbw table after mass activity
regards
nag

Problem with PDF extract in a report

Hi guys,
We are facing a peculiar problem with PDF extract in a report. When we run a report and export PDF , all the records in the result set are populated in the PDF. however, if I navigate away from the report and return back to the same report, and click on export pdf (with the result set already populated) i get a blank PDF document without any records. If i run the report again and then export the PDF it works fine.
Export excel works fine for all cases.
I am assuming it has got something to do with the way the system handles the cache for PDF export.
I also found that this occurs only when we have a value list filter with "none" set as default,and in this case, initially on opening the report for the first time the query does not get executed automatically.
Any help on this would be highly appreciated.
Thanks and Regards,
immanuel

Hi Immanuel,
Have you tried clearing the cache? My guess is, it is probably a defect.
Regards,
Vikram

Problem with Extract Filter

I have Problem with Extract Filter which was working OK until recently.
Now, when I choose the filter the screen does not come up as the extract screen as it should and no other action can be taken except to press escape which returns me to normal. working. Looks as if the extraction function has been sleected but does not show?
I am trying to use the extract on a layer. Have tried to use it on a selection also.
Anyone suggest a solution please?
Bill

Without a way to reset the tool, the only possibility seems to be to reset your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
(A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.)

HT201210 i have problem with my i pad mini i tried to update my i pad then the download corrpted then the itones said that you most restore your device then i accept but its start extracting software above then veriving restore with i pad finaly its sai

i have problem with my i pad mini i tried to update my i pad then the download corrpted then the itones said that you most restore your device then i accept but its start extracting software above then veriving restore with i pad finaly its said the i pad cannot be restored....etc SORRY FOR MY BAD ENG

- Try restoring on another computer.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Pdf text extract problem with CID font and Identity-H

Hi all,
Iam facing some big problem with text extraction from pdf file.
Currently iam using congviews pdf2xl text extraction tool.
About 95% of the text extract correcly but few charaters showing box some ? and some dotted circle mark.
Font Used:
ArialUnicodeMS(Embedded Subset)
Type:(True Type (CID)
Encoding:Identity-H
TimesNewRomanPSMT
Type:True Type
Encoding:ANSI
ActualFont:TimesNewRomanPSMT
ActualFontType:TrueType
Anyone please help me to overcome this.
Regards
Gilbert.X

I tried with acrobat pro9 export option it retrieved only alphabets and numbers all of the hindi charcaters showing just ........
By the way how can i upload the my pdf file within this forum please guide me.
Regards
Gilbert.X

Problem with 0CRM_SALES_ACT_1 to extract activities

Similar Messages

Maybe you are looking for