Problem with 10.4.9 install

I still have dial-up (bummer) and can't get 10.4.9 downloaded and installed as I continually get the 'timed out' message after about 35 MB of the 52.7MB is in the machine. That's 2+ hours at 48K speeds. Other updates seem to download perfectly. Any helpful suggestions would be appreciated, and yes, I know a high speed connection would solve the problem... however we live in the 'boonies' and the signal doesn't reach our front door yet.
Thanks, Mike

Can you get to an Apple Store? Bring a blank CD with you, and get the combo version.
Heck, download the combo from any compter, even a PC, and burn it to disk.

Similar Messages

When installed JDK but I have problem with System vars may install bundle

When installed JDK but I have problem with System vars may install bundle [netbeans&JDK] WITHOUT UNISTALLING initial JDK or needed uninstall first ?

With the word 'automatically', yes you do need pulseaudio. I'm sure you could cook up some udev or related rule to do that in Alsa, but pulseaudio would be easier.

I have a problem with Apple store when installing large application: The system crashes. Any suggestion?

I have a problem with Apple store when installing large application (example xCode): The system crashes.
It begun with 10.8 usualy with few tries it work but with 4.6 no succes.
Any suggestion?

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

HT204490 OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

I've been using it on all of my computer without any problems. Remember you won't see any positive comments here. Everyone here is complaining about a problem. If you want a good experience with any upgrade or update first make a backup from which you can boot the computer. If you are installing an update, like 10.10.3 for example, always download and install the Combo Updater - OS X Yosemite 10.10.3 Combo Update. Before you install any update or upgrade over an existing system you should do this:Repair the Hard Drive and Permissions:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu.

If you have problems with Apple Apps after installing Mavericks

I had a problem with Apple Apps after installing Mavericks. They would bounce in the dock but never open. The problem apps I had trouble with were CALENDAR, MAIL, and even APP STORE. I am guessing it has to do with permissions when setting up via iCloud. Here's what I did to make my apps work again after the update:
Restart computer, then immediately hold down OPTION so you can start from the 10.9 RECOVERY DISK.
Run DISK UTILITY, then run REPAIR DISK, then run REPAIR DISK PERMISIONS.
After this, RESTART, then hold COMMAND OPTION P R at the same time until your computer restarts three times.
After it boots up, the apps began working like they should have.

That's where your questions about Lion should be posted.

Problem with Photoshop CS 6 install

I have a CS6 academic license. I installed it on my laptop without difficulty. But when i installed it on the MacPro I got two error messages "Could not load actions because an unexpected end-of-file was encountered" and "could not initialize Photoshop because the preference file was invalid (it has been deleted). This sounds like a bad download but it has occurred on several different downloads.

I got a call today Akash of Adobe, in Indiana is suspect, calling about another problem with an Adobe product, Lightroom, that I was having. I'd solved that one myself so I presented my problem with PS6 installation. At this point I had uninstalled PS6 but had the application installation file was sitting on my desktop. So he had me reinstall just PS6 (all the other apps in the Wed Design Suite we already installed). After entering the suite license number, which Adobe accepted, we procedure with a standard installation procedure EXCEPT just prior to the actual installation he had me hold down Command Shift Option keys. This led to a question about deleting a file with a YES-NO option being presented. Akash had me delete it and the rest of the application was successful! I asked exactly what we had deleted and I think that he explained that it was a corrupted "Preference" file. What I realized afterwards was I was unclear if this corrupted file was from a previous attempt to install PS6 or was a corrupted file from an earlier edition of PS (my PS5 is working fine and I haven't opened PS4 in quite some time since PS5 was fine). So the problem is solved and I thank you for you efforts. Cheers Reed

Problem with serial number and installing PSE 12

I purchased Adobe PSE 12 yesterday and the purchase went through. But I never received a confoirmation email from Adobe. Now, when I try to enter the serial number to install, I'm told there is a problem with the serial number and I must contact customer support. Can't get through to customer support though. What should I do? I desperately need to get this program installed. Thanks.

Hi 2Summers,
Please provide me the serial number and I will check it for you.
Send me aprivate message. Do not post it here.
If you dont know how to do that refer : http://forums.adobe.com/thread/1184148

Several mysterious problems with Solaris 11 x86 install

Hi folks,
I've recently installed Solaris 11 x86 as a replacement for Solaris 9 SPARC on an Ultra 2 machine. I like the operating system, but I've promptly acquired some mysterious problems. The computer is a Fujitsu Siemens Esprimo E2500 with a Pentium 4 HT 3.06 GHz processor, 2 GB RAM, an 80 GB SATA disk and a 147 GB SCSI disk.
I have had a few occasions on which the screen goes totally blank, the monitor claims that there is no signal, and I have to restart the machine. However, with the blank screen, the hard drive activity light is sometimes still flashing. This happens predictably when I try to log off (as opposed to shutting down) and when I use Totem media player and click on anything inside the Totem window. The motherboard has built-in graphics and brief specifications can be found here:
http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRIMO/Datasheets/ds_esprimo_edition_e2500.pdf
Yesterday my PS/2 keyboard started causing the motherboard to beep crazily when I use it. It beeps rapidly 4 times, then prints the expected character. However, the problem doesn't occur at the initial log in screen. The mouse cursor has also gone beserk on one occasion, flying all over the screen (I had this problem with a previous PC, but a different OS, and thought it was a hardware fault, which I why I got this new computer). With the keyboard problem, the machine is basically unusable. However, it is configured as a dual boot machine, and the keyboard problem isn't present with Windows XP.
There are also a few smaller, odd problems. Occasionally all the icons vanish from my Gnome desktop. The command prompt also mysteriously changed from $chris@pluto to $bash-4.1 just before the keyboard problem appeared, although that might have had something to do with me copying my home directory to a different disk and editing the /etc/auto_home file (moving the home directory worked fine). Also, unlike with Solaris 9 SPARC, I find that I have to have external SCSI devices switched on at boot time, should I want to use them later. That's a pain. With Solaris 9, I could run "boot -r" when I first attached the device, then switch on the SCSI devices and mount them whenever I wanted.
After the useful advice I received here about "more" and "less", I thought I'd post these problems and see if anyone can help. I'd really appreciate some advice. Can anyone identify likely causes for these problems? Which problems can I expect to solve and which do I have to live with?
Many thanks,
Chris Tidy
Edited by: Chris Tidy on 23-Mar-2012 03:36

Hi folks,
I've recently installed Solaris 11 x86 as a replacement for Solaris 9 SPARC on an Ultra 2 machine. I like the operating system, but I've promptly acquired some mysterious problems. The computer is a Fujitsu Siemens Esprimo E2500 with a Pentium 4 HT 3.06 GHz processor, 2 GB RAM, an 80 GB SATA disk and a 147 GB SCSI disk.
I have had a few occasions on which the screen goes totally blank, the monitor claims that there is no signal, and I have to restart the machine. However, with the blank screen, the hard drive activity light is sometimes still flashing. This happens predictably when I try to log off (as opposed to shutting down) and when I use Totem media player and click on anything inside the Totem window. The motherboard has built-in graphics and brief specifications can be found here:
http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRIMO/Datasheets/ds_esprimo_edition_e2500.pdf
Yesterday my PS/2 keyboard started causing the motherboard to beep crazily when I use it. It beeps rapidly 4 times, then prints the expected character. However, the problem doesn't occur at the initial log in screen. The mouse cursor has also gone beserk on one occasion, flying all over the screen (I had this problem with a previous PC, but a different OS, and thought it was a hardware fault, which I why I got this new computer). With the keyboard problem, the machine is basically unusable. However, it is configured as a dual boot machine, and the keyboard problem isn't present with Windows XP.
There are also a few smaller, odd problems. Occasionally all the icons vanish from my Gnome desktop. The command prompt also mysteriously changed from $chris@pluto to $bash-4.1 just before the keyboard problem appeared, although that might have had something to do with me copying my home directory to a different disk and editing the /etc/auto_home file (moving the home directory worked fine). Also, unlike with Solaris 9 SPARC, I find that I have to have external SCSI devices switched on at boot time, should I want to use them later. That's a pain. With Solaris 9, I could run "boot -r" when I first attached the device, then switch on the SCSI devices and mount them whenever I wanted.
After the useful advice I received here about "more" and "less", I thought I'd post these problems and see if anyone can help. I'd really appreciate some advice. Can anyone identify likely causes for these problems? Which problems can I expect to solve and which do I have to live with?
Many thanks,
Chris Tidy
Edited by: Chris Tidy on 23-Mar-2012 03:36

Problem with external HDD after installing updates in Mac os X 10.5 leopard

Hi,
I just went out to the store and bought a copy of the leopard.
I installed it with nothing attached to the computer. Everything went fine.
When I went to update the software I had two packages there that I updates, so I had to restart the computer. when it started again it indicated that it had problems with my Iomega Ultramax 1tb disk. It says that disk repair failed and that I only have limited access to the disk. and since it's ALOT of data on the disk, I don¨t rally got the tools to copy everything to another location and then erase the disk and copy everything back. So does anyone know if there's a solution to this.
I'd be really happy to get a solution on this,
thanks alot.
Rich

When I'm using disk utility and use "verify disk" I get the following message:
"First Aid failed
Disk utility stopped verifying "UltraMax" because the following error was encountered.
Filesystem verify or repair failed."

Performance problem with sdn_nn - new 10g install

I am having a performance problem with sdn_nn after migrating to a new machine. The old Oracle version was 9.0.1.4. The new is 10g. The new machine is faster in general. Most (non-spatial) batch processes run in half the time. However, the below statement is radically slower. The below statement ran in 45 minutes before. On the new machine it hasn't finished after 10 hours. I am able to get a 5% sample of the customers to finish in 45 minutes.
Does anyone have any ideas on how to approach this problem? Any chance something isn't installed correctly on the new machine (the nth version of the query finishe, albeit 20 times slower)?
Appreciate any help. Thanks.
- Jack
create table nearest_store
as
select /*+ ordered */
a.customer_id,
b.store_id nearest_store,
round(mdsys.sdo_nn_distance(1),4) distance
from customers a,
stores b
where mdsys.sdo_nn(
b.geometry,
a.geometry,
'sdo_num_res=1, unit=mile',
1
) = 'TRUE'
;

Dan,
customers 110,000 (involved in this query)
stores 28,000
Here is the execution plan on the current machine:
CREATE TABLE STATEMENT cost = 81947
LOAD AS SELECT
PX COORDINATOR
PX SEND QC (RANDOM) :TQ10000
ROW NESTED LOOPS
1 1 PX BLOCK ITERATOR
1 1ROW TABLE ACCESS FULL CUSTOMERS
1 3 PARTITION RANGE ALL
1 3 TABLE ACCESS BY LOCAL INDEX ROWID STORES
DOMAIN INDEX STORES_SIDX
I can't capture the execution plan on the old database. It is gone. I don't remember it being any different from the above (full scan customers, probe stores index once for each row in customers).
I am trying the query without the create table (just doing a count). I'll let you know on that one.
I am at 10.0.1.3.
Here is how I created the index:
create index stores_sidx
on stores(geometry)
indextype is mdsys.spatial_index LOCAL
Note that the stores table is partitioned by range on store type. There are three store types (each in its own partition). The query returns the nearest store of each type (three rows per customer). This is by design (based on the documented behavior of sdo_nn).
In addition to running the query without the CTAS, I am also going try running it on a different machine tonight. I let you know how that turns out.
The reason I ask about the install, is that the Database Quick Installation Guide for Solaris says this:
"If you intend to use Oracle JVM or Oracle interMedia, you must install the Oracle Database 10g Products installation type from the Companion CD. This installation optimizes the performance of those products on your system."
And, the Database Installlation Guide says:
"If you plan to use Oracle JVM or Oracle interMedia, Oracle strongly recommends that you install the natively compiled Java libraries (NCOMPs) used by those products from the Oracle Database 10g Companion CD. These libraries are required to improve the performance of the products on your platform."
Based on that, I am suspicious that maybe I have the product installed on the new machine, but not correctly (forgot to set fast=true).
Let me know if you think of anything else you'd like to see. Thanks.
- Jack

Problem with supplied OS X install discs

hey everyone-
after reading around on here, I found out that using Migration Assistant to transfer the files from my G4 were possibly hurting my performance. I'd also read that the preferred course of action in this case was to archive and install.
well, I popped in my supplied OS X install dvd (1 of 2) and selected everything I wanted to install, and clicked OK. it installed everything off of that disc fine, but when I got to the second disc, I ran into problems. twice in a row the DVD burner (sony DW_D150A, according to System Profiler) spun down when the install item "Garageband Loops" was at 73%.
after spending about 20 minutes trying to get the computer OUT of installation mode (are you reading this apple? TOTAL PITA!!) and FINALLY succeeding (simply by shutting the computer down by holding the front power button for about 6-10 seconds), I re-inserted the FIRST install DVD and restarted holding C to start from the DVD.
I changed the install settings (hopefully to omit the garageband loops), and then it occurred to me to look at the second DVD. all around it, about half an inch from the outer edge, are circular "scratches". I use that term loosely, because it doesn't appear that there are any flaws in the plastic, and it actually looks like errors on the metal film itself! I tried installing again anyway, only to have it stall at Garageband Loops yet again, but this time at only 58%.
I just wanted to see if anyone else was having problems with this? I know I didn't check the DVDs to see if they had any markings on them when I got them, wanted to see if anyone else had these weird markings on their install DVDs.
Zack

I had the same problem (though I didn't see the scratches) with either the Garageband Loops or I think there was something called System Sound Loops. Anyhow, I managed to get the install to work only after telling the installer not to install the problem file. I think Apple had a bad batch (or maybe we're just unlucky). I called support and had them send me a replacement set which I just got today.

Problems with Labivew 2013 / 14 install - Ni Variable Engine error and Labview does not close, processes do not stop when I run Vis.

Hi All,
I am hoping at all my problems are relateded to a problem I am experancing, when I look into my windows 7 (64bit) event viewer near every time I boot up I get an error regarding the NI Variable Engine which reads.
The description for Event ID 0 from source NI Variable Engine cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
C:\Program Files (x86)\National Instruments\Shared\Tagger\ni_tagger_plugin_mxs.dll: Failure to load plugin: Unexpected Error: Unable to get the Interface from the plug-in.
and a second which is the same apart fomr the last line
Unable to load the MXS configuration plugIn: Failed to get MAX Configuration interface for Tagger: 0x80040318
I have tried uninstalling all labview things and I have tried repairing all labivew programs. Along with this I got this error when I installed Labview 2013 so I thougth why not try 2014 and I still get the same problems. I also shoudl point out I use bot 32 bit and 64 bit versions of labivew. I have installed labview on many machines before but never encountered this problem. That being said this was a new clean windows install.
Along with thiese errors labview heardly ever shuts down properly when I close the program it just freezes and needs forshed shut down.
Apart form this I noticed that when I run any of my Vis which I have never had problems with in the past and I stop the program somtiems processes keep using CPU such as "lktsrv.exe"
I really need to get this sorted out because its morstly the crushing and processes not stopping which is rather annoying.
I shoudl also say that these problems are both in the 32bit and 64 bit versions of labview not difference. and no difference if its 2013 or 2014
Cheers

Hi GajanS,
Thanks for your reply sorry I havetn noticed anybody had replied as I stopped hoping for any responce before then.
I have attached a screenshot of the four processes that seems to be giving me a problem.
I have actually managed to find the program causing labivew to crash was in fact my antivirus software which I have now removed and have no more problems with labview crashing on shutdown.
After removing it I tried the repair feature again for all my labview programs but sadly the one persistant problem remaining is still the four processes using around 13% processor each. I have found out this happens sometime after booting up regardless of if I run labivew or not. So it does not directly seem related to the running of any labview applications but rather a bug in the labview software.
the processes are:
lktsrv.exe
tagsrv.exe
nidmsrv.exe
lkads.exe
as shown in the task manager.
I would relaly help if I can get this sorted out.
Cheers
Attachments:
Screenshot 2015-03-24 21.50.00.png ‏12 KB

Problem with wifi connection since installing Lion OS X

Has anyone had problems since installing Lion OS X with there wifi connection? I keep getting bumped off my connection in multiple different locations ....that i never had a problem before. I installed Lion on my laptop and my Mac and I am having the same problem with both. Is there something i need to change on my settings?

One way to look at this problem is to install a Stumbler program and look at what channels are being used in your immediate area. You may find the channel you are using is very busy, and switching your Router to a channel with less competition, or setting your Router to automatic channel selection, improves the situation.
Another way to address this problem, especially since it seems to correlate with software Upgrade, is to set it up from scratch again:
System Preferences > Network > WiFI/Airport > ( Assist me ) > ( Set Up ) ...
... and re-specify from scratch, especially using a New Location.

Problem with fonts after lion install

after installing lion, font book detects problems with fonts

Likely a corrupted font cache.
Download the free OnyX and run all the cleaning and maintainence aspects and reboot.
http://www.titanium.free.fr/
Read my post about backup, repair and restore options and the link to Pondini's TimeMachine page
https://discussions.apple.com/message/16276201#16276201

Weird problem with my GPU being installed but not used by windows.

I have a problem with my graphics card.
I have an integrated Intel HD Graphics gpu, that Windows recognised and installed the driver thereof.
The problem is, Windows doesn't use this gpu, but uses his own Microsoft Basic Display Adapter.
I'll provide some screenshots here:
http://i.imgur.com/ncKoU3g.png
http://i.imgur.com/XkeMWL3.png
http://i.imgur.com/m31Wo5h.png
http://i.imgur.com/kSlpUvY.png
http://i.imgur.com/atMh00p.png
Ps: Don't answer with the reply of "Have you updated your drivers yet", because I've done that over a thousand times already.
Thanks in advance!

Is there any solution for the above query. I called HP customer care. But it seems that they accept calls only on weekdays.

E71 - Problems with dictonary and languages instal...

Hi to everybody!
I have a problem with my dictonary but I can't find a solution.
My firmware version is 110.07.127 09-10-2008 rm-346 nokia e71-1 (17).
My default pre-installed language is English.
I have installed 2 languages in the memory card: Italian and Turkish.
At this point, I have tried to install (in the memory card) another language (Croatian) but at the end of the language installation the dictionary forced me to remove one language.
I have also tried to uninstall languages by Application Manager with no success...when I have tried to reinstall languages, I have got the same message.
I can't find a solution to this problem.
Can you help me?
Thanks a lot in advance.
Bye bye.

I'm very disappointed
I can't believe that E71 only allows the installation of max 3 languages!

Problem with 10.4.9 install

Similar Messages

Maybe you are looking for