Problem with 2 tables nodes in MAIN window in smartforms...

Hello Experts,
I have created 2 table nodes in my MAIN window to display data coming from different internal tables.
Now, the problem is that whenever the 1st table node page breaks, the 2nd table node gets affected
and it also page breaks. What I want is that the 2nd table must finish displaying certain number of records
before the page break of the 1st table node takes effect.
For example, I want to display 10 records for both table nodes 1 and 2. So I created an event in
table node 1 that if it is 10 records or more, then it will go to the next page. So in effect, my table
2 node did not print any records at all in the 1st page and it only started printing its first record in page 2.
How do I print 10 records also in table node 2 before it page breaks?

Hi,
It's simple,
Pre- U should had declared a second page for the same window with header, main & footer.
now
First when u r looping the internal table provide no of rows eg Row 1 TO 10. in the Loop ( Data Tab)
or
when defing TEXT Go to PC Editor and mention all the fields Under  PROTECT -  ENDPROTECT.
This would solve the issue.
Thanks
Ravi

Similar Messages

  • Fixing the height of the maon area of a table in the main window in smartfo

    hi all,
    I have a requirement where I need to fix the height of the main area of a table in the main window in a smartform.

    Hi,
    If you need to fix the height of the main area of a table on a page.
    Then use a loop node to loop the table with 1 to 6 rows and under the loop node make us of a template for displaying the fixed no of rows.
    Regards,
    Ram

  • Smartform problem how to make second page main window dynamic?

    Hi SAP Community,
    I am facing a problem with designing a smartform. I have taken a table in the main window of the first page, and the main window length varies according to the number of entries in the table. If the records are more than that can be adjusted in the first page then the ramaining records move to the second page main window. After the second page main window i have defined a window which i have marked to get displayed after the main window, but the problem i am facing is that that the second page main window is geting overlapped with the window defined to come after it. Can any one help me with how to control the length of second page main window dynamically.
    Regards,
    Tushar

    Hi,
    Normally, to trigger next page the main window is mandatory.
    However, if the contents of main window are not sufficient enough to move over to next page then the next page would not get trigerred.
    Moreover, please check whether the table of contents in the first page are also existing in the next page otherwise you need to trigger a new page by using a command.
    Also please direct the next page of SECOND page to SECOND itself and check.
    Regards,
    Ram

  • Problems with a table in PDF`S footer

    Dear sirs,
    We are having problems when trying to run a PDF with Adobe LiveCycle Designer tool.
    We are working with a PDF which is composed of a header, the main body and a footer. We have created a table (table1) at the footer and
    another one at the main body (table2). This last table (table2) may overflow therefore it will genarate two pages for our PDF.
    On both pages appear the header and the footer correctly but in the last page it does not write the data from the table included in the footer (table1).
    We have no problems with the table included in the main body
    In the attachments, I send you the screenshots of both pages in which I have marked in red the part where we have error.
    May you help us to solve our problem?
    Thanks in advance your help.
    Edited by: emgaitan on Mar 16, 2010 2:18 PM

    Wardell,
    Check the data in RSA3 for the extractor that you use to bring data .
    You must be using the data source 0CO_OM_CCA_09. Check the data and reconcile and you will get it.
    Let me know if you need anything else.
    Thanks
    Ravi Thothadri
    [email protected]

  • Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

    Hello All,
    I have a problem. I have the Solution Center and a HP Office Jet J4550 and windows 7 (64bit). When ever I open the solution center, the solution center says " HP office jet J4550 series disconnected" When I open HP document manager, I can access the printer.  Additionally, when I run the HP Print Diagnostic Utility 4.0, it sees the printer, no issues. I can print test pages. No issues. I downloaded the latest driver from the HP site (OJJ4500_Full_13, 299,359KB) Your insight is appreciated.
    Thank you
    Roy B

    I have a similar problem with the J4580 and my new Windows 7 64-bit laptop.  HP Solution Center says that the printer is disconnected.  Furthermore, it can print some documents (short ones), but it was unable to print a 1-page 5MB pdf file.  The printer truncated the page after printing just the top 10%.   The printer is OK with my wife's Windows 7 32-bit laptop.
    I've seen many other people complain about similar problems in this and other forums.  Apparently the driver for J4500 printers is not compatible with Windows 7 64-bit.  Can HP please provide an updated driver or patch?

  • Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

    Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
    I saved a new workspace and it did not help.
    No problem before I went to Maverick.

    I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

  • I am getting problem with internal table & work area declaration.

    I am working with 'makt' table ..with the table makt i need to work with styles attributes ..so i declared like this
    TYPES : BEGIN OF ty_makt,
             matnr TYPE makt-matnr,
             spras TYPE makt-spras,
             maktx TYPE makt-maktx,
             maktg TYPE makt-maktg,
             celltab TYPE lvc_t_styl,
           END OF ty_makt.
    DATA : i_makt TYPE TABLE OF ty_makt.
    DATA : wa_makt TYPE ty_makt .
        But end of program i need to update dbtable "makt"...i am getting problem with internal table & work area declaration.
    i think makt table fields mapping and internal table/work area mapping is not correct. so please help me to get out from this.

    Hi Nagasankar,
    TYPES : BEGIN OF TY_MATNR,
                  MATNR TYPE MAKT-MATNR,
                  SPRAS TYPE MAKT-SPRAS,
                  MAKTX TYPE MAKT-MAKTX,
                  MAKTX TYPE MAKT-MAKTG,
                  CELLTAB TYPE LVC_T_STYL,  " Its Working perfectly fine..
                 END OF TY_MAKT.
    DATA: IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
              WA_MAKT TYPE TY_MAKT.
    Its working perfectly fine. if still you are facing any issue post your complete code.
    Thanks,
    Sandeep

  • Problem with a table control

    Hi gurus,
    I´ve a problem with a table control. It has 3 columns which one is a checkbox.
    I can fill all fields but in the moment I mark the checkbox this line must be unwritable. How can I do it?
    Thanks for all
    Dani

    Assign a function code to the checkbox column....
    so when u check / uncheck any entry, PAI + PBO will be triggered....
    In the PBO during the loop of table control, check the checkbox field value. if it is 'X', make the row readonly
    by looping at screen and setting screen-input = 0 for rest of the columns.
    like ...
    LOOP AT tc_itab
           WITH CONTROL tc_test
           CURSOR tc_test-current_line.
       module set_row_readonly. " loop at screen and set input = '0' if checkbox is checked...
    ENDLOOP.

  • Problem with maintain table views SM30 Transaction

    Hello All,
    i have a problem with the table maintenance view SM30, it doesn't permit me to modify the rows in the table.
    we have added a field into the table and when i tried to change the table view from menu: Utilities ==> table maintenance generator==> change the system propose me a message that the screen 0001 will be deleted and recreated...but the system has deleted the screen and doesn't recreate it...in somewehere on internet we find that we should use the transaction SE55 menu:
    Environment==> modification ==> Maintenance screen ==> button Layout which open the tool Screen Painter and from that we have created our screen with 4 fields of our table...our result that the screen is created and i can see it from the SM30 transaction but i can't insert rows in the table...when i try to go to maintain table: menu: Utilities ==> Table maintenance generator to try if i can modify something the system give me a message: "set the compare flag dialog ZIV_DP_PLCHAR_LA"
    the ZIV_DP_PLCHAR_LA is the name of my table...
    can you give me some advices please how should i do to fix this problem to insert rows in table throughout the transaction
    SM30 "maintain table views: initial screen"
    if i want to delete the screen from the SE55 transaction to recreate it newly what should i do to take care about some options
    to have a new screen?
    thanks for all
    Bilal

    Hi
    First delete the old table maintainence generator.
    Now Recreate the screen and your table is good to go..
    These error messages come when we add new fields and different version of the table maintainence generator in database.

  • Problem with Pivot Table with Graph: Line Bar Combo

    Hello people!
    I have a problem with pivot table and line bar combo (all in the same view (pivot table))
    I have some measures and one dimension in my report.
    --------------measure1---measure2---measure3
    Dim A.1
    Dim A.2
    Dim A.3
    If I choose my graph line bar combo automatically choose "line" measure 3 (last measure in "Show Controls"). How can I do if I want my measure1 for line and I don't want modify my pivot table?
    Thank you very much!

    Ok, I'll explain my problem again. In my pivot table I add graph vision and I want in the same view (Pivot table). My graph is "Line Bar Combo" and I don't know how but the last of my measures belongs to right AXIS, if I change order of my measures I can see in my graph the measure that I want in my right axis BUT also it changes the order of my pivot table.
    This is my problem. I think that I can do that with different views but I lose my selector view to view graphic and my pivot table at the same time.

  • Problem with truncate table in procedure ora -00054

    hi do anybody know where is mistake ???
    the procedure has problem with truncate table
    ora - 00054: resource busy and acquire with NOWAIT specified
    ora - 06512 at "POVAPSYS.HMAN_P_REFRESH", line 6
    ora - 06512 at "POVAPSYS.POVAPSYS", line 6
    ora - 06512 at line 1
    this is my procedure....
    AS
    BEGIN
    execute immediate 'TRUNCATE TABLE hman_t_max';
    INSERT INTO hman_t_max SELECT * FROM hman_v_max;
    COMMIT;
    END;

    2.MAKE SURE THAT OTHER THAN YOU ANYBODY IS TRYING TO
    COMPILE AND RUN THE PROCEDUREShould he make sure that anybody is running the procedure?
    3.MAKE SURE THAT ANY PARALLEL QUERY IS RUNNING IN THE
    SERVER SIDE,THATS KEEPS THE RESOURCE BUSYShould he make sure any parallel query is running in the server side to keep the resource busy?
    Gita,
    I COULDN'T RESIST HAVING ONE SUGGESTION FOR YOU. Please look at the impact of your English in the reply before posting. Check if that sends reverse message!
    Cheers
    Sarma.

  • Problems with partition tables

    Hi all,
    I've got some problems with partition tables. The script at the bottom run but when I wanna insert some values it returns me an error
    (ORA-06550: line 1, column 30: PL/SQL: ORA-06552: PL/SQL: Compilation unit analysis terminated
    ORA-06553: PLS-320: the declaration of the type of this expression is incomplete or malformed
    ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored)
    and I can't understand why!
    There's something incorrect in the script or not?
    Please help me
    Thanks in advance
    Steve
    CREATE TABLE TW_E_CUSTOMER_UNIFIED
    ID_CUSTOMER_UNIFIED VARCHAR2 (27) NOT NULL ,
    START_VALIDITY_DATE DATE NOT NULL ,
    END_VALIDITY_DATE DATE ,
    CUSTOMER_STATUS VARCHAR2 (255)
    PARTITION BY RANGE (START_VALIDITY_DATE)
    SUBPARTITION BY LIST (END_VALIDITY_DATE)
    PARTITION M200909 VALUES LESS THAN (TO_DATE('20091001','YYYYMMDD'))
    (SUBPARTITION M200909_N VALUES (NULL), SUBPARTITION M200909_NN VALUES (DEFAULT)),
    PARTITION M200910 VALUES LESS THAN (TO_DATE('20091101','YYYYMMDD'))
    (SUBPARTITION M200910_N VALUES (NULL), SUBPARTITION M200910_NN VALUES (DEFAULT)),
    PARTITION M200911 VALUES LESS THAN (TO_DATE('20091201','YYYYMMDD'))
    (SUBPARTITION M200911_N VALUES (NULL), SUBPARTITION M200911_NN VALUES (DEFAULT)),
    PARTITION M200912 VALUES LESS THAN (TO_DATE('20100101','YYYYMMDD'))
    (SUBPARTITION M200912_N VALUES (NULL), SUBPARTITION M200912_NN VALUES (DEFAULT)),
    PARTITION M201001 VALUES LESS THAN (TO_DATE('20100201','YYYYMMDD'))
    (SUBPARTITION M201001_N VALUES (NULL), SUBPARTITION M201001_NN VALUES (DEFAULT)),
    PARTITION M201002 VALUES LESS THAN (TO_DATE('20100301','YYYYMMDD'))
    (SUBPARTITION M201002_N VALUES (NULL), SUBPARTITION M201002_NN VALUES (DEFAULT)),
    PARTITION M210001 VALUES LESS THAN (MAXVALUE))
    (SUBPARTITION M210001_N VALUES (NULL), SUBPARTITION M210001_NN VALUES (DEFAULT))
    ;

    Hi Hoek,
    the DB version is 10.2 (italian version, then SET is correct).
    ...there's something strange: now I can INSERT rows but I can't update them!
    I'm using this command string:
    UPDATE TW_E_CUSTOMER_UNIFIED SET END_VALIDITY_DATE = TO_DATE('09-SET-09', 'DD-MON-RR') WHERE
    id_customer_unified = '123' and start_validity_date = TO_DATE('09-SET-09', 'DD-MON-RR');
    And this is the error:
    Error SQL: ORA-14402: updating partition key column would cause a partition change
    14402. 00000 - "updating partition key column would cause a partition change"
    *Cause:    An UPDATE statement attempted to change the value of a partition
    key column causing migration of the row to another partition
    *Action:   Do not attempt to update a partition key column or make sure that
    the new partition key is within the range containing the old
    partition key.
    I think that is impossible to use a PARTITION/SUBPARTITION like that: in fact the update of "END_VALIDITY_DATE" cause a partition change.
    Do u agree or it's possible an update on a field that implies a partition change?
    Regards Steve

  • Problem with the table control BDC in FV60 transaction

    Hi All,
    I got the problem with the table control in FV60 transaction.
    This is working for 900 line items.After 900 line items it is giving the problem like it is 1000th line item.You can post only 999 line items.
    I know we can post only 999 line items,but in my file only 920 line items.
    Please give me solution,if anybody come across this situation.
    Thanks & regards,
    rakesh.

    Hello Rakesh ,
    your file may have only 920 line items , but based on those line items, SAP may create few more  new lines ( based on the clearing recon accounts , inter company transaction ...etc )...
    regards
    Prabhu

  • Can i see the inner nodes in main window(smart forms)

    I am creating 2 nodes (let us say text nodes) in main window or secondary window whatever it is.
    Now what I want is to see those 2 node on form painter. At present I am unable to see those. Is there any way to see the inner nodes in windows.

    Hi,
    you cannot see them in form painter, it is not possible .but you can include what ever you want by switch off the form painter and add the nodes.
    Regards
    vijay

  • Page Protection in Main window of smartform using Folder issue

    Hi Experts,
    We can fix the page protection issue of records in main window by checking the No Page Break check box at the line type level in a smartform.
    I tried to solve this issue by using the folder option. I created a folder inside the table of a main window and checked the page protection check box. Save and activated the layout. When i tried to add the table to the folder, the check box for page protection was reset to blank.
    Why does this happen? Cant we use page protection inside main window using folder ??
    Thanks

    Hi friend,
    We can do page protection functionality inside table of main window using Folders option. Follow the below steps,
    1. Assume rows are created inside table in a main window, with corresponding line types.
    2. Create a folder named PROTECT inside table, for example in Main area of table.
    3. Just drag and drop your Row(s) into folder PROTECT and simply click page protection check box of the folder PROTECT.
    4. This will help you to add the required functionality using Folders option in smartform.
    Try this and update me in case of any concerns. Hope this will solve your problem.
    Check the attachment also for your reference.
    Cheers...

Maybe you are looking for