Problem with 640 kernel: SAP R3, Oracle9i, Sunsolaris
Dear Experts,
Am facing problem with kernel 640 version.
1. We have Production (620) and DR servers (620).
2. I upgraded kernel in production to 640, still pumping and applying redo logs in DR server which is 620 kernel.
3. I copied kernel 640 from production server to DR server.
4. When I open database in DR server (system started normally) it is showing kernel version 620 only, not 640.
5. Only diff is production server is upgraded from 4.0B to 4.7 and DR server recently we installed 4.7 directly.
After restoring backup in DR server again control file created and moved to DR server and applying redo logs normally.
Why kernel version showing only 620 in DR server???
Is control file plays any role in kernel upgrade. Should I open database and check again (with new control file and newly restored data). . . .
Any idea, , , ,
Adv thanks....
Am believe I did. I followed as under.
1. Copied production box exe in /sapmnt/SID/ to other location of same box
2. zipped using zip command zip <newfilename>.zip exe on same box
3. ftp'ed to DR box with normal ftp
4. unzipped the the zip file there with command unzip <newfilename>.zip then moved to /sapmnt/SID/
5. next renamed.
You tell me one thing will there be any wrong with zip command
regds
Similar Messages
-
Problem with printing through SAP
Hi All,
We have problem with printing, only one person through SAP can only print the documents successfully and the remaining are getting incomplete print output. This is happening only for transactions GD23 and FB03 (FI related transactions). We have tried with removing Saplpd folder and installing Sprint as suggested by SAP from note 894444. Still problem persists. Please suggest me in this regards.
Veerendra Kumar.Hi Ardhian,
We are using Front end printing and already installed SAP GUI new version i.e. 7.10.
Only one user is able to print the document correctly from SAP, and other are getting incorrect print and getting error message "System cannot print the last 80 columns of the report" on one system.
SAP version we are using is 4.7EE.
Let me know if any more information needed for analysing the issue.
VeerendraKumar.
Edited by: Veerendra Kumar Mutyala on Feb 20, 2009 5:35 AM
Edited by: Veerendra Kumar Mutyala on Feb 20, 2009 5:37 AM -
Two problems with custom kernel
I get two problems with my custom kernel that is not using initrd and otherwise working fine:
1) initscripts does not print anything, i.e., I see the kernel messages and after a short while the login prompt. It seems to start the daemons, however, since my network is working. During shutdown the printout is working as usual.
2) the machine does not power off properly (just hangs/stops after saying that is now powers off).
I am missing some kernel options? Or do I have to configure something differently for not having an initrd?
Thanks, CCccom wrote:I now re-compiled with Arch Linux's default settings (except for SCSI, SATA, and filesystem drivers built in) and noinitrd in GRUB. I get the same two problems. What is initrd doing that I missed?
how about display drivers? are you compiling them in the kernel or as external modules? -
Problem with 'SAPGUI_PROGRESS_INDICATOR' in SAP GUI 7.10
Hi!
We have a problem with SAP GUI 7.10 PL 11. When running this little code snipet, the SAP GUI crashes and SM21 mentions a broken pipe while calling writev in niuxi.c
DATA: lv_i type i,
lv_string type string.
DO 50000 TIMES.
lv_i = lv_i + 1.
lv_string = lv_i.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
* PERCENTAGE = 0
text = lv_string.
ENDDO.
Can anyone confirm this problem or is it solved with a higher patch level ?
Thank you,
MarkusHello Markus,
this code snippet would be perfect to be added to an official bug report created at http://service.sap.com/message on component BC-FES-GUI.
Best regards
Rolf-Martin -
Problem with "Submit to SAP" button in Adobe Form
Hello All,
I have a problem with my Adobe form. The "Submit to SAP" button for some reason does not seems to work in the newer forms. Whenever I click on the button, no action is being triggered. However, when I load older version of the same form, the button will respond.
Has anyone come across similar situation before ? Any suggestions/feedback will be greatly appreciated. Thank you.
fromKwok WeiHi Bhavik,
I created different version of the forms (Eg: added new logo, additional table rows etc...) by using the save a copy function in adobe designer. Seems that the original one works but the later ones will no longer respond to the button.
The submit action is also correctly specified in the property of the UI Element. Otherwise it will not work on any forms... is my understanding correct ?
Thnaks
from
Kwok Wei -
Suspend / Resume problem with -ck kernels.
Sometimes with the linux-ck kernel my laptop doesn't suspend / resume correctly.
Sometimes when suspending my laptop will take "extra long" to suspend.
When it resumes the processor & fan will turn on, but the suspend light will still be blinking and the screen doesn't turn on. Sometimes (but not always) the caps-lock light will start blinking after I try to wake it up, like a kernel panic. It happens more often when closing the lid to suspend, but has happened while suspending manually.
This only happens with -ck kernels. I have tried both the linux-ck and linux-ck-corex kernels with same result. This started happening around kernel 3.0.8 I believe. I thought it was a bug that would be fixed, but it still occurs.
I have a Lenovo Thinkpad T410s, Intel Core i5, Intel graphics. I use the TLP scripts for power savings, and Xfce-Power-Manager for my power manager. I can see nothing relevant in the logs. Suspend / Resume always works with the "official" kernel.
Any ideas?Ok, I think I narrowed the problem down to the BFS scheduler.
I compiled "linux-bfs" from the AUR, installed it and rebooted and lo and behold my suspend / resume problem was back. Rebooted with the stock kernel, did about 10 suspend & resume cycles in a row... and it worked great each time.
Sometimes when using linux-bfs or linux-ck, I can "revive" the system after a bad resume, by closing the lid and opening it slowly. Also I know the screen is just not "off", because the caps lock key light will not respond. If the caps-lock key light starts blinking (on-and-off) after a resume, I assume it is a kernel panic, and nothing besides a forced power-off will fix it.
Last edited by jon (2011-12-09 18:11:27) -
Problems with own kernel and nvidia
Hi.
I've got a little problem with nvidia driver. I removed stock kernel and compiled my own. Then I installed nvidia drivers (from nvidia.com) and everythings gone fine. But after reboot Xserver doesn't seem to start. The only way to run X is to reinstall nvidia drivers (after every reboot)... anyone knows any solution for that?Log:
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "on"
(**) NVIDIA(0): Option "TripleBuffer" "on"
(**) NVIDIA(0): Option "AddARGBGLXVisuals"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! Please ensure
(EE) NVIDIA(0): that there is a supported NVIDIA GPU in this system, and
(EE) NVIDIA(0): that the NVIDIA device files have been created properly.
(EE) NVIDIA(0): Please consult the NVIDIA README for details.
(EE) NVIDIA(0): *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "wfb"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found -
Problem with services of SAP after installation of ABAP on MS SQL server
Hi,
I am trying top install 2004 Netweaver ABAP+ JAVA on my machine
Following is my machine configuration -
Machine type - Windows 2003 Standard Edition SP1
Machine name - pun-idmqa-vm1
SAP Instance name - QSA
DB type - MS SQL 2000 SP4 + hotfixes and instcoll.exe is executed. After nstalling SQL shows server proper as SQL_Latin1_General_CP850_BIN2 collation
Message port - 3600
I could sucessfully install Database from CD and thereby could sucessfully install ABAP. During postinstall I tried to start the server. all the following services got up -
msg_server.exe
disp+work.exe
igswd.exe
But after some time 2nd service goes down. Following is the error message flashed in
trc file: "dev_disp", trc level: 1, release: "640"
Mon Jul 02 16:33:16 2007
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 31
intno 20020600
make: multithreaded, Unicode
pid 2492
***LOG Q00=> DpSapEnvInit, DPStart (00 2492) [dpxxdisp.c 1100]
Mon Jul 02 16:33:17 2007
shared lib "dw_xml.dll" version 31 successfully loaded
shared lib "dw_xtc.dll" version 31 successfully loaded
shared lib "dw_stl.dll" version 31 successfully loaded
shared lib "dw_gui.dll" version 31 successfully loaded
Mon Jul 02 16:33:21 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 054B0040, size: 3192688)
DpShMCreate: allocated sys_adm at 054B0040
DpShMCreate: allocated wp_adm at 054B1B58
DpShMCreate: allocated tm_adm_list at 054B4478
DpShMCreate: allocated tm_adm at 054B44A0
DpShMCreate: allocated wp_ca_adm at 0575B0E8
DpShMCreate: allocated appc_ca_adm at 05760EA8
DpShMCreate: allocated comm_adm_list at 05762DE8
DpShMCreate: allocated comm_adm at 05762E00
DpShMCreate: allocated vmc_adm_list at 057A9AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 057A9AF8
DpShMCreate: allocated wall_adm at 057A9B00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
Mon Jul 02 16:33:22 2007
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1132 MB
<ES> 1131 blocks reserved for free list.
ES initialized.
Mon Jul 02 16:33:36 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
Mon Jul 02 16:33:38 2007
***LOG Q0K=> DpMsAttach, mscon ( pun-idmqa-vm1) [dpxxdisp.c 9719]
Mon Jul 02 16:33:46 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
Mon Jul 02 16:33:47 2007
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 31
Release check o.K.
Mon Jul 02 16:34:20 2007
ERROR => W0 (pid 2740) died [dpxxdisp.c 12170]
ERROR => W1 (pid 3736) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3876) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3896) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3852) died [dpxxdisp.c 12170]
ERROR => W5 (pid 2008) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3776) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 4052) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2740 (SIGUSR2)
ERROR => DpWpKill(2740, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3736 (SIGUSR2)
ERROR => DpWpKill(3736, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3876 (SIGUSR2)
ERROR => DpWpKill(3876, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-3896 (SIGUSR2)
ERROR => DpWpKill(3896, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3852 (SIGUSR2)
ERROR => DpWpKill(3852, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-2008 (SIGUSR2)
ERROR => DpWpKill(2008, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3776 (SIGUSR2)
ERROR => DpWpKill(3776, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-4052 (SIGUSR2)
ERROR => DpWpKill(4052, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:30 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Jul 02 11:04:30 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2740 Ended no 1 0 0
1 DIA 3736 Ended no 1 0 0
2 UPD 3876 Ended no 1 0 0
3 ENQ 3896 Ended no 1 0 0
4 BTC 3852 Ended no 1 0 0
5 BTC 2008 Ended no 1 0 0
6 SPO 3776 Ended no 1 0 0
7 UP2 4052 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jul 02 11:04:30 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Mon Jul 02 11:04:30 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jul 02 11:04:30 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:35 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3832) (SOFT_KILL)
Stop icman
killing process (3960) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3832 HANDLE:1600)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:36 2007
NiISelect: TIMEOUT occured (1000 ms)
Mon Jul 02 16:34:37 2007
[DpProcDied] Process died (PID:3832 HANDLE:1600)
[DpProcDied] Process died (PID:3960 HANDLE:1588)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'pun-idmqa-vm1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1608
MsIDetach: detach MS-system
Mon Jul 02 16:34:38 2007
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2492) [dpxxdisp.c 8478]
Good Bye .....
I am new to SAP EP installation. Please help me regarding this issue.
Thanks and Regards,
Smithaforgot to tell you, after that probably you will need to make the installation again.
good luck. -
Sound problems with new kernel
When I upgraded to 2.6.21, my sound just started skipping. It would still play, but apps would freeze and sounds would continue for ages. Now, for some odd reason, I get no sound at all.
dmesg:
Linux version 2.6.21-suspend2 (root@architect) (gcc version 4.1.2 20070423 (prerelease)) #1 SMP PREEMPT Tue May 8 23:00:33 CEST 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000d8000 size: 0000000000008000 end: 00000000000e0000 type: 2
copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000001be70000 end: 000000001bf70000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000001bf70000 size: 000000000000c000 end: 000000001bf7c000 type: 3
copy_e820_map() start: 000000001bf7c000 size: 0000000000004000 end: 000000001bf80000 type: 4
copy_e820_map() start: 000000001bf80000 size: 0000000000080000 end: 000000001c000000 type: 2
copy_e820_map() start: 000000002bf80000 size: 0000000000080000 end: 000000002c000000 type: 2
copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001bf70000 (usable)
BIOS-e820: 000000001bf70000 - 000000001bf7c000 (ACPI data)
BIOS-e820: 000000001bf7c000 - 000000001bf80000 (ACPI NVS)
BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved)
BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
447MB LOWMEM available.
Entering add_active_range(0, 0, 114544) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 114544
HighMem 114544 -> 114544
early_node_map[1] active PFN ranges
0: 0 -> 114544
On node 0 totalpages: 114544
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 862 pages used for memmap
Normal zone: 109586 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F6AB0, 0014 (r0 PTLTD )
ACPI: RSDT 1BF752A9, 002C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1BF7BF64, 0074 (r1 ATI Salmon 6040000 ATI F4240)
ACPI: DSDT 1BF752D5, 6C8F (r1 ATI MS2_1535 6040000 MSFT 100000E)
ACPI: FACS 1BF7CFC0, 0040
ACPI: BOOT 1BF7BFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x8008
Allocating PCI resources starting at 30000000 (gap: 2c000000:d3f80000)
Built 1 zonelists. Total pages: 113650
Kernel command line: root=/dev/hda3 ro resume2=swap:/dev/hda2
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0138b000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 2591.805 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 448176k/458176k available (2391k kernel code, 9452k reserved, 784k data, 268k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff83000 - 0xfffff000 ( 496 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
lowmem : 0xc0000000 - 0xdbf70000 ( 447 MB)
.init : 0xc0422000 - 0xc0465000 ( 268 kB)
.data : 0xc0355fb1 - 0xc041a2ac ( 784 kB)
.text : 0xc0100000 - 0xc0355fb1 (2391 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5190.03 BogoMIPS (lpj=2595019)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebf9ff 00000000 00000000 00003080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0200 (from 0420)
CPU0: Intel(R) Celeron(R) CPU 2.60GHz stepping 09
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
Device driver platform lacks bus and class support for being resumed.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Device driver pci0000:00 lacks bus and class support for being resumed.
PCI quirk: region 8000-803f claimed by ali7101 ACPI
PCI quirk: region 8040-805f claimed by ali7101 SMB
Boot video device is 0000:01:05.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 7 10) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 7 *10)
ACPI: PCI Interrupt Link [LNK2] (IRQs 7 *10)
ACPI: PCI Interrupt Link [LNK3] (IRQs 7 *10)
ACPI: PCI Interrupt Link [LNK4] (IRQs 7 10) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 7 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 7 10) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs *5)
ACPI: PCI Interrupt Link [LNK8] (IRQs 7 10) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
Device driver pnp0 lacks bus and class support for being resumed.
pnp: PnP ACPI: found 9 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Time: tsc clocksource has been installed.
pnp: 00:07: ioport range 0x40b-0x40b has been reserved
pnp: 00:07: ioport range 0x480-0x48f has been reserved
pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:07: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:07: ioport range 0x8000-0x807f could not be reserved
pnp: 00:07: iomem range 0xd0007000-0xd0007fff has been reserved
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: d0300000-d03fffff
PREFETCH window: d8000000-dfffffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
IO window: 00001800-000018ff
IO window: 00001c00-00001cff
PREFETCH window: 30000000-33ffffff
MEM window: 34000000-37ffffff
PCI: Enabling device 0000:00:0a.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Simple Boot Flag at 0x37 set to 0x1
apm: BIOS not found.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [email protected]).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Activating ISA DMA hang workarounds.
Device driver pnp1 lacks bus and class support for being resumed.
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNK6] -> GSI 10 (level, low) -> IRQ 10
0000:00:08.0: ttyS0 at I/O 0x1428 (irq = 10) is a 8250
0000:00:08.0: ttyS1 at I/O 0x1440 (irq = 10) is a 8250
0000:00:08.0: ttyS2 at I/O 0x1450 (irq = 10) is a 8250
0000:00:08.0: ttyS3 at I/O 0x1460 (irq = 10) is a 8250
Couldn't register serial port 0000:00:08.0: -28
Device driver isa lacks bus and class support for being resumed.
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Device driver lo lacks bus and class support for being resumed.
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Suspend v2.2.10
Suspend2 Userspace Storage Manager support registered.
Suspend2 Basic User Interface support registered.
Suspend2 Compressor support registered.
Suspend2 Block I/O support registered.
Suspend2 Swap Allocator support registered.
Suspend2 File Allocator support registered.
Suspend2 Userspace UI support registered.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 0000:00:10.0
ACPI: Unable to derive IRQ for device 0000:00:10.0
ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2040-0x2047, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2048-0x204f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: TOSHIBA MK4025GAS, ATA DISK drive
Device driver ide0 lacks bus and class support for being resumed.
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SD-R2512, ATAPI CD/DVD-ROM drive
Device driver ide1 lacks bus and class support for being resumed.
ide1 at 0x170-0x177,0x376 on irq 15
PCI driver ALI15x3_IDE lacks driver specific resume support.
PCI driver PCI_IDE lacks driver specific resume support.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Enabling device 0000:00:0b.2 (0010 -> 0012)
ACPI: PCI Interrupt 0000:00:0b.2[C] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:0b.2: EHCI Host Controller
ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.2: irq 11, io mem 0xd0005000
ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
Device driver usbdev1.1_ep00 lacks bus and class support for being resumed.
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
Device driver usbdev1.1_ep81 lacks bus and class support for being resumed.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:0b.0: UHCI Host Controller
uhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:0b.0: irq 10, io base 0x00002000
Device driver usbdev2.1_ep00 lacks bus and class support for being resumed.
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Device driver usbdev2.1_ep81 lacks bus and class support for being resumed.
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0b.1[b] -> Link [LNK3] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:0b.1: UHCI Host Controller
uhci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:0b.1: irq 10, io base 0x00002020
Device driver usbdev3.1_ep00 lacks bus and class support for being resumed.
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Device driver usbdev3.1_ep81 lacks bus and class support for being resumed.
usb 3-2: new low speed USB device using uhci_hcd and address 2
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda:Device driver usbdev3.2_ep00 lacks bus and class support for being resumed.
usb 3-2: configuration #1 chosen from 1 choice
Device driver usbdev3.2_ep81 lacks bus and class support for being resumed.
hda1 hda2 hda3 hda4
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
Suspend2: SwapAllocator: Signature found.
Suspend2: Resuming enabled.
Suspend2: Normal swapspace found.
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: replayed 3 transactions in 0 seconds
ReiserFS: hda3: Using r5 hash to sort names
natsemi dp8381x driver, version 2.1, Sept 11, 2006
originally by Donald Becker <[email protected]>
http://www.scyld.com/network/natsemi.html
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10
Device driver eth0 lacks bus and class support for being resumed.
natsemi eth0: NatSemi DP8381[56] at 0xd0006000 (0000:00:12.0), 00:0e:7f:eb:fd:8a, IRQ 10, port TP.
ndiswrapper version 1.43 loaded (smp=yes)
ndiswrapper: driver bcmwl5 (Broadcom,06/26/2004, 3.70.17.0) loaded
PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNK3] -> GSI 10 (level, low) -> IRQ 10
ndiswrapper: using IRQ 10
Device driver wlan0 lacks bus and class support for being resumed.
wlan0: ethernet device 00:90:4b:4a:18:85 using NDIS driver: bcmwl5, version: 0x3461100, NDIS version: 0x501, vendor: '', 14E4:4320.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
usbcore: registered new interface driver ndiswrapper
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
ACPI: CPU0 (power states: C1[C1] C2[C2])
Time: acpi_pm clocksource has been installed.
ACPI: Thermal Zone [THRM] (55 C)
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected Ati IGP345M chipset
agpgart: AGP aperture is 64M @ 0xd4000000
PCI: Enabling device 0000:00:06.0 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNK7] -> GSI 5 (level, low) -> IRQ 5
ali_stimer_read: stimer is not ready.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ali_stimer_read: stimer is not ready.
ali_stimer_read: stimer is not ready.
ali_stimer_read: stimer is not ready.
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
ali_stimer_read: stimer is not ready.
input: PC Speaker as /class/input/input5
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input6
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.1-2
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
input: SynPS/2 Synaptics TouchPad as /class/input/input7
atkbd.c: Unknown key pressed (translated set 2, code 0xee on isa0060/serio0).
atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xee on isa0060/serio0).
atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known.
AC'97 1 does not respond - RESET
AC'97 1 access is not valid [0xffffffff], removing mixer.
ali mixer 1 creating error.
Yenta: CardBus bridge found at 0000:00:0a.0 [0000:0000]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x01111112, devctl 0x64
Yenta: ISA IRQ mask 0x0058, PCI irq 11
Socket status: 30000006
Device driver pcmcia_socket0 lacks bus and class support for being resumed.
PCI driver parport_pc lacks driver specific resume support.
ali15x3_smbus 0000:00:11.0: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
ali15x3_smbus 0000:00:11.0: ALI15X3 not detected, module not inserted.
PCI driver ali15x3_smbus lacks driver specific resume support.
PCI driver shpchp lacks driver specific resume support.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Device driver i2c-0 lacks bus and class support for being resumed.
PCI driver ali1535_smbus lacks driver specific resume support.
lp0: using parport0 (interrupt-driven).
cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ppdev: user-space parallel port driver
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
Adding 262576k swap on /dev/hda2. Priority:-1 extents:1 across:262576k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNK0] -> GSI 10 (level, low) -> IRQ 10
[drm] Initialized radeon 1.25.0 20060524 on minor 0
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode
[drm] Setting GART location based on old memory map
[drm] writeback test succeeded in 1 usecs
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
bcm43xx driver
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
pcmcia: Detected deprecated PCMCIA ioctl usage from process: lshwd.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
wlan0: no IPv6 routers present
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
dca85843
*pde = 00000000
Oops: 0000 [#1]
PREEMPT SMP
Modules linked in: ohci_hcd bcm43xx ieee80211softmac ieee80211 ieee80211_crypt radeon drm ipv6 ext2 mbcache ppdev lp pcmcia i2c_ali1535 joydev rtc_sysfs snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device rtc_proc rtc_dev snd_pcm_oss snd_mixer_oss parport_pc usbhid hid pcspkr parport ff_memless rtc_cmos rtc_core rtc_lib yenta_socket psmouse serio_raw rsrc_nonstatic pcmcia_core shpchp i2c_ali15x3 i2c_core pci_hotplug snd_ali5451 snd_ac97_codec ac97_bus snd_pcm snd_timer snd soundcore snd_page_alloc tsdev ati_agp agpgart evdev thermal processor fan button battery ac ndiswrapper natsemi reiserfs ide_cd cdrom ide_disk uhci_hcd ehci_hcd usbcore generic alim15x3 ide_core
CPU: 0
EIP: 0060:[<dca85843>] Tainted: P VLI
EFLAGS: 00010046 (2.6.21-suspend2 #1)
EIP is at snd_ali_playback_prepare+0x193/0x200 [snd_ali5451]
eax: 00002000 ebx: 00000000 ecx: 000010a0 edx: 000010f8
esi: 0000000f edi: dac6506c ebp: dab482c0 esp: d3e0bd54
ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
Process artsd (pid: 4379, ti=d3e0a000 task=db7c2030 task.ti=d3e0a000)
Stack: 00000000 00003fff 00000eb3 00000000 00000001 00000000 00000000 0000f000
00000000 00000001 c0135c95 c03eebac 00000000 00000000 dac654f8 0000ac44
dac65000 00000000 1a5f0000 00000eb3 dab482c0 00000002 dcaaa34c dab482c0
Call Trace:
[<c0135c95>] notifier_call_chain+0x25/0x30
[<dca9bca9>] snd_pcm_do_prepare+0x9/0x20 [snd_pcm]
[<dca9b90b>] snd_pcm_action_single+0x2b/0x60 [snd_pcm]
[<dca9cb9b>] snd_pcm_action_nonatomic+0x6b/0x70 [snd_pcm]
[<dca9f4fd>] snd_pcm_common_ioctl1+0x42d/0xf80 [snd_pcm]
[<dca9f36e>] snd_pcm_common_ioctl1+0x29e/0xf80 [snd_pcm]
[<c0106dc0>] do_IRQ+0x40/0x70
[<dcaa2adc>] snd_pcm_hw_rule_add+0x8c/0x110 [snd_pcm]
[<c0141a3a>] clocksource_get_next+0x3a/0x40
[<c0131a79>] do_timer+0x239/0x810
[<c013ccda>] remove_wait_queue+0x1a/0x50
[<dcaa04b9>] snd_pcm_playback_ioctl1+0x39/0x430 [snd_pcm]
[<dcaa0973>] snd_pcm_playback_ioctl+0x43/0x50 [snd_pcm]
[<dcaa0930>] snd_pcm_playback_ioctl+0x0/0x50 [snd_pcm]
[<c018e8fb>] do_ioctl+0x2b/0x90
[<c018e9bc>] vfs_ioctl+0x5c/0x2a0
[<c018ec72>] sys_ioctl+0x72/0x90
[<c0104232>] sysenter_past_esp+0x5f/0x85
=======================
Code: 10 0f b7 c0 66 ef c7 44 24 4c 00 10 00 00 e9 f5 fe ff ff 90 8d 74 26 00 8b 44 24 40 89 da e8 05 e8 ff ff e9 e0 fe ff ff 8b 47 18 <8b> 15 00 00 00 00 a3 18 00 00 00 01 c0 a3 14 00 00 00 8b 4c 24
EIP: [<dca85843>] snd_ali_playback_prepare+0x193/0x200 [snd_ali5451] SS:ESP 0068:d3e0bd54
note: artsd[4379] exited with preempt_count 1
BUG: scheduling while atomic: artsd/0x00000001/4379
[<c0352823>] __sched_text_start+0x503/0x950
[<c012dc39>] tasklet_action+0x49/0xc0
[<c012d8a2>] __do_softirq+0x72/0xe0
[<c012db8b>] irq_exit+0x5b/0x90
[<c02cbfb1>] skb_dequeue+0x41/0x60
[<c0353dbd>] __mutex_lock_slowpath+0x9d/0x280
[<dca9ccba>] snd_pcm_drop+0x5a/0xe0 [snd_pcm]
[<dca9cf0f>] snd_pcm_release_substream+0x1f/0x70 [snd_pcm]
[<dca9cfaf>] snd_pcm_release+0x4f/0xb0 [snd_pcm]
[<c01839b9>] __fput+0x99/0x170
[<c0180d87>] filp_close+0x47/0x80
[<c012a72f>] put_files_struct+0x8f/0xb0
[<c012b8dd>] do_exit+0x11d/0x7d0
[<c0120bf8>] __wake_up+0x38/0x50
[<c01058e0>] do_trap+0x0/0xf0
[<c011f4e4>] do_page_fault+0x2e4/0x630
[<c011f200>] do_page_fault+0x0/0x630
[<c03552ac>] error_code+0x7c/0x84
[<dca85843>] snd_ali_playback_prepare+0x193/0x200 [snd_ali5451]
[<c0135c95>] notifier_call_chain+0x25/0x30
[<dca9bca9>] snd_pcm_do_prepare+0x9/0x20 [snd_pcm]
[<dca9b90b>] snd_pcm_action_single+0x2b/0x60 [snd_pcm]
[<dca9cb9b>] snd_pcm_action_nonatomic+0x6b/0x70 [snd_pcm]
[<dca9f4fd>] snd_pcm_common_ioctl1+0x42d/0xf80 [snd_pcm]
[<dca9f36e>] snd_pcm_common_ioctl1+0x29e/0xf80 [snd_pcm]
[<c0106dc0>] do_IRQ+0x40/0x70
[<dcaa2adc>] snd_pcm_hw_rule_add+0x8c/0x110 [snd_pcm]
[<c0141a3a>] clocksource_get_next+0x3a/0x40
[<c0131a79>] do_timer+0x239/0x810
[<c013ccda>] remove_wait_queue+0x1a/0x50
[<dcaa04b9>] snd_pcm_playback_ioctl1+0x39/0x430 [snd_pcm]
[<dcaa0973>] snd_pcm_playback_ioctl+0x43/0x50 [snd_pcm]
[<dcaa0930>] snd_pcm_playback_ioctl+0x0/0x50 [snd_pcm]
[<c018e8fb>] do_ioctl+0x2b/0x90
[<c018e9bc>] vfs_ioctl+0x5c/0x2a0
[<c018ec72>] sys_ioctl+0x72/0x90
[<c0104232>] sysenter_past_esp+0x5f/0x85
=======================
hwdetect --show-modules:
AGP : agpgart ati-agp
PATA : pata_ali ata_generic
SCSI : st
USB : usbcore ehci-hcd uhci-hcd
NET : natsemi ieee80211 ieee80211_crypt ieee80211softmac bcm43xx
INPUT : evdev ff-memless joydev pcspkr psmouse serio_raw tsdev usbhid
PCMCIA : pcmcia_core rsrc_nonstatic yenta_socket
SOUND : ac97_bus snd-mixer-oss snd-pcm-oss snd-page-alloc snd-pcm snd-timer snd snd-ac97-codec snd-ali5451 soundcore
VIDEO : radeonfb fb_ddc
OTHER : cdrom lp ppdev hid i2c-algo-bit i2c-ali1535 i2c-ali15x3 i2c-core parport parport_pc pci_hotplug shpchp rtc-cmos rtc-core rtc-dev rtc-lib rtc-proc rtc-sysfs
Any help will be greatly appreciated. Thanks in advance.
Last edited by coolpyrofreak (2007-05-09 15:33:35)I seem to have the same problem. The sound would play in some programs, would not in others, and in all of them when I stop playing, it would repeat the last half second endlessly. Could anybody shed some light on this problem?
in dmesg:
AC'97 1 does not respond - RESET
AC'97 1 access is not valid [0xffffffff], removing mixer.
ali mixer 1 creating error.
and in errors.log:
May 13 09:14:22 aconarch ali15x3_smbus 0000:00:06.0: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
May 13 09:14:22 aconarch ali15x3_smbus 0000:00:06.0: ALI15X3 not detected, module not inserted.
May 13 09:14:22 aconarch AC'97 1 access is not valid [0xffffffff], removing mixer.
May 13 09:14:22 aconarch ali mixer 1 creating error.
EDIT: 'lsmod | grep snd'
snd_seq_oss 29056 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46800 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
snd_pcm_oss 38816 0
snd_mixer_oss 14336 1 snd_pcm_oss
snd_ali5451 19212 1
snd_ac97_codec 95396 1 snd_ali5451
ac97_bus 2432 1 snd_ac97_codec
snd_pcm 68484 3 snd_pcm_oss,snd_ali5451,snd_ac97_codec
snd_timer 19076 2 snd_seq,snd_pcm
snd 44388 11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_ali5451,snd_ac97_codec,snd_pcm,snd_timer
soundcore 6496 1 snd
snd_page_alloc 7816 1 snd_pcm
Last edited by bender02 (2007-05-13 15:41:04) -
Two problems with recent kernels - KMS resolution and fan speed
Two issues have arisen since kernel26-2.6.32-6. One is that that the boot process and all consoles only use approx. two-thirds of the screen, with the correct console font - as if the resolution is being detected as 800x600 rather than 1440x900. The other, which may or may not be connected but also cropped up in that upgrade, is that my main laptop fan jumps to 100% speed near the start of booting, and stays there. Downgrading to 2.6.32-5 solves both problems, which persist through to 2.6.32-9. (That I normally boot into a custom kernel which I haven't bothered upgrading is why I've not tried to pin down the problem(s) until now.) Any ideas of what might be going on? I've got an Aspire 7730 with an Intel Mobile 4 chipset, using i915.
Returning after another gap, still relying on a now-fairly-old kernel...
eldragon wrote:
chech if the svideo or tvout is being enabled.
if there are more than one display enabled, the console will take the space of the smallest..
This seems plausible - unfortunately, I don't have access to any external device to check directly what's happening - where should I look in logs or the file system to see what's happening?
under i915, you have to pass to the kernel: video=VGA-1:off
or whatever the display is.
This, and VGA-0 or 2, make no difference.
about the fan thing, if you can bisect that and report the commit that actually breaks your fan, they will probably fix it for future versions
I've tried and failed, and so have resorted to posting a rather unhelpful bug report - http://bugs.archlinux.org/task/19017 -
Problems with New Kernel regarding mouse and random shutdowns etc
After upgrading to kernel 3.2.1-2, my computer has shutdown a couple times. They "normal" shutdowns as in I will press the shutdown button in my de and computer actually shuts down. Also a couple times when turning my computer off i will have to reboot because my laptop touchpad is not working. going into a tty i do rmmod psmouse and it will say the module is not loaded, loading the module makes no difference. The last few updates I have also had regressions with my wireless. By default arch blocks my wireless and in rc.local I have rfkill unblock all, but this lately does not always work. I have been manually loading the ath9k driver. My laptop is a gateway nv79c, intel i5, onboard graphics, 4 gb of ram. My wireless card is an atheros ar928x. To be clear, the mouse problem and shutting down has started since updating to 3.2.1-2. Yes I know the kernel was just updated today but I have been using my laptop a lot today.
Last edited by quasifilmie (2012-01-24 03:21:25)I seem to have the same problem. The sound would play in some programs, would not in others, and in all of them when I stop playing, it would repeat the last half second endlessly. Could anybody shed some light on this problem?
in dmesg:
AC'97 1 does not respond - RESET
AC'97 1 access is not valid [0xffffffff], removing mixer.
ali mixer 1 creating error.
and in errors.log:
May 13 09:14:22 aconarch ali15x3_smbus 0000:00:06.0: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
May 13 09:14:22 aconarch ali15x3_smbus 0000:00:06.0: ALI15X3 not detected, module not inserted.
May 13 09:14:22 aconarch AC'97 1 access is not valid [0xffffffff], removing mixer.
May 13 09:14:22 aconarch ali mixer 1 creating error.
EDIT: 'lsmod | grep snd'
snd_seq_oss 29056 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46800 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
snd_pcm_oss 38816 0
snd_mixer_oss 14336 1 snd_pcm_oss
snd_ali5451 19212 1
snd_ac97_codec 95396 1 snd_ali5451
ac97_bus 2432 1 snd_ac97_codec
snd_pcm 68484 3 snd_pcm_oss,snd_ali5451,snd_ac97_codec
snd_timer 19076 2 snd_seq,snd_pcm
snd 44388 11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_ali5451,snd_ac97_codec,snd_pcm,snd_timer
soundcore 6496 1 snd
snd_page_alloc 7816 1 snd_pcm
Last edited by bender02 (2007-05-13 15:41:04) -
OC4J 9.0.3 (date 07/31) problem with the MDB-demo and Oracle9i-databases (v9.*)
Trying to get the supplied mdb-demo to work in the J2EE 1.3 certified version of OC4J 9.0.3 (from 07/31).
It works fine with the OJMS-provider in a Oracle 8i v8.1.7 database but not in a Oracle9i database.
I have now tried three possible versions of Oracle9i available from OTN and Metalink:
- v9.0.1.1
- v9.0.1.3.1
- v9.2.0.1
I have noted from the "known-issue-page" that the supported version is v9.0.1.3 with patch #2416054 applied. Unfortunately is that patch only available for Solaris as of today...
I all cases I get one and the same error message from the CartEJB - bean in OC4J:
CartEJB::send2Queue: begin; item=QueueqSNDQUE|Queue
CartEJB::send2Queue; Exception occurred: oracle.jms.AQjmsException: ORA-06550: l
ine 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'AQ$_JMS_ENQUEUE_BYTES_MESSAGE'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
CartEJB::send2Queue: end
Is there some post-installation-step that I missed (e.g. copying som jar-fil from Oracle9i to OC4J...) or is there anything else I can do to get the supplied MDB demo working with Oracle9i?
Thanks in advance,
Magnus Larsson.Ok...
Thanks for your help!
So I will stick with Oracle8i v8.1.7 until the patch is available on Windows...
Maybe I'll make a try with Linux also (thanks for noting me!), but probably will the Windows patch be available before I succeed with Oracle9i on Linux...
I will post a reply once I get the patch working on either Linux or Windows!
Regards,
Magnus. -
Problems with jdbc:thin connection to oracle9i RAC
Hi,
I am having problems connecting to a 2 node RAC using jdbc:thin.
Connecting directly to the nodes is no problem, but I get an exception when trying to use load balancing/failover.
this is my connection string (URL):
jdbc:oracle:thin:@(DESCRIPTION =
(ADDRESS_LIST =
(LOAD_BALANCE = on)
(FAILOVER = on)
(SOURCE_ROUTE = OFF)
(ADDRESS =
(PROTOCOL = TCP)
(HOST = NODE1)
(PORT = 1521)
(ADDRESS =
(PROTOCOL = TCP)
(HOST = NODE2)
(PORT = 1521)
(CONNECT_DATA =
(SERVICE_NAME = MYSERVICENAME)
(failover_mode =
(type = session)
(method = basic)
and this is some of the stack trace :
java.sql.SQLException: Io exception: NL Exception was generated
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:334)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:418)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:521)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:325)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
Any help would be greatly appreciated.
Regards,
ChristianDear Maran,
Yes! You can always increase the number of process and session to a higher limit at database end, but it won't be a feasible solution. Rather look into the areas which are the cause of this and try to solve them out.
What if you increase these parameters at database end to accomodate more and more sessions, and allow them to use more and more resources like process, and still they keep on increasing rather than getting closed. It would be worthless use of Database server Reources.
It is really very simple, just look for the SQL statements which are having last_call time a long back (from V$SESSION and V$SQLAREA or you may use tools like TOAD), and try to find out the reason why they are not releasing the connections back to Connection Pool. Check out these SQL statements in the application code and ensure Connection Handling is done over them.
Some "RS.CLOSE" type of command is there in java (I am not sure with the proper syntax)
Regards,
Manoj.
null -
Problem with Interaction between SAP GUI and BSP Applications
Hi Folks,
I am new to BSP and am trying to create a program to created a BSP within the SAP GUI. This is my program, I have tried to find as to what error have I made but I am not able to find out.
I can only find a button post document in the output, but I am not able to trigger any event. Please let me know as to what is the error.REPORT zbsp_iact_gui.
SET SCREEN 100.
* CLASS cl_my_html_yiewer DEFINITION
CLASS cl_my_html_viewer DEFINITION INHERITING FROM cl_gui_html_viewer.
PUBLIC SECTION.
METHODS: constructor IMPORTING parent TYPE REF TO cl_gui_container.
METHODS: on_sapevent FOR EVENT sapevent OF cl_gui_html_viewer IMPORTING action postdata.
ENDCLASS. "cl_my_html_viewer DEFINITION
* CLASS cl_my_html_viewer IMPLEMENTATION
CLASS cl_my_html_viewer IMPLEMENTATION.
METHOD constructor.
super->constructor( parent = parent ).
DATA: event_tab TYPE cntl_simple_events,
event TYPE cntl_simple_event.
event-eventid = me->m_id_sapevent.
event-appl_event = 'X'.
APPEND event TO event_tab.
call method html_control->set_registered_events
exporting
events = event_tab.
SET HANDLER me->on_sapevent FOR me.
ENDMETHOD. "constructor
METHOD on_sapevent.
BREAK-POINT.
IF action CS 'COUNTER'.
DATA: counter TYPE string.
READ TABLE postdata INDEX 1 INTO counter.
SPLIT counter AT '=' INTO counter counter.
MESSAGE counter TYPE 'I'.
ENDIF .
ENDMETHOD. "on_sapevent
ENDCLASS. "cl_my_html_viewer IMPLEMENTATION
DATA: html_viewer TYPE REF TO cl_my_html_viewer,
html_container TYPE REF TO cl_gui_custom_container,
fcode LIKE sy-ucomm.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'TESTHTM1'.
IF html_viewer IS INITIAL.
CREATE OBJECT html_container
EXPORTING
container_name = 'HTML'.
CREATE OBJECT html_viewer
EXPORTING
parent = html_container.
DATA: url TYPE string, urlc(2048) TYPE c.
cl_bsp_runtime=>construct_bsp_url(
EXPORTING in_application = 'ZBSP_IACT_GUI'
in_page = 'Start.htm'
IMPORTING out_abs_url = url ).
urlc = url. " type conversion STRING to C
CONCATENATE urlc '?SAP-CLIENT=650' INTO urlc.
html_viewer->show_url( url = urlc ).
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE fcode.
WHEN OTHERS.
CALL METHOD cl_gui_cfw=>dispatch.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
Edited by: Nonconformist Pagal on May 12, 2009 1:42 PM
Edited for formatting by: Durairaj Athavan Raja on May 14, 2009 9:50 AM -
Problem with create standby by rman oracle9.2
I have a problem: until create standby database by rman i have error:
RMAN-03015: error occurred in stored script opomc_clone
RMAN-03002: failure of Duplicate Db command at 02/18/2010 12:26:34
RMAN-03015: error occurred in stored script Memory Script
ORA-19587:
ORA-27091: skgfqio:
ORA-27072: skgfdisp:
SVR4 Error: 5: I/O error
Additional information: 349248
The scripts are ok becouse they work earlier.
The main database was a standby but now is primary.
I create new standby base on remote server
I have in bdump strange error for me until create rman copy for standby:
Clearing standby activation ID 1004670785 (0x3be20f41)
The primary database controlfile was created using the
'MAXLOGFILES 5' clause.
The resulting standby controlfile will not have enough
available logfile entries to support an adequate number
of standby redo logfiles. Consider re-creating the
primary controlfile using 'MAXLOGFILES 8' (or larger).
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 409600000;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 409600000;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 409600000;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 409600000;
Any suggestions?
Sorry for my english :)
Edited by: user12044451 on 2010-02-18 03:56can you use like this
BACKUP DATABASE INCLUDE CURRENT CONTROLFILE FOR STANDBY PLUS ARCHIVELOG;startup nomount;
duplicate target database for standby nofilenamecheck;
in detail check
http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmstand.htm#1000921
Maybe you are looking for
-
Retrieving free space in oracle 8i
hi, i am having 30 gb oracle 8.1.7.2 database. by the weekend we are gonna purge around 60% of data from it. we want to use the freed space for new object. the downtime avaiable for app. is very less. so we can't go with exp/imp to retrieve free spac
-
Hi Experts, What is the use of STAD tcode in XI. Could you please explain it. Also when and where it will be used in XI? Regards, Madhu.
-
Regarding mandatory IDOC segments and fields!
Hello all, I am working with an IDOC interface (material price change). IDOC type is MATERIALVALUATION_PRICECHANG01. When we go to WE60 for this IDOC type, SAP has marked all segments as optional for some reason. But I am trying to figure out which f
-
I see mediocrity is still trademark of Apple. Cannot enter my Visa number to make a purchse. Mind you my old iTunes got corrupted (again); so info should still be there.
-
Embed fonts in dynamic TLF textfied which is created during runtime!!
Hi Experts, I have two TLF textfileds in my application. The first TLF textfield is on the stage and the second one is created dynamically during runtime. Now I am able to embed the fonts in the first TLF textfield by using "use device fonts" since i