Problem with a Dell Monitor - stopped working yesterday, just a flashing orange light. Monitor or Mac Mini issue?
I've been using an old Dell monitor with my Mac Mini ever since I got it, however yesterday evening my monitor stopped working - however I'm not sure whether the issue is with the monitor or the Mac Mini. It just doesn't seem to respond when I try to bring the Mac Mini out of sleep. I can hear that the Mini is responding to the keyboard - I hear the right noise for pressing return on the password box without entering anything.
I've made sure all the cables are plugged in properly (power & connection to the Mini), but all I'm getting is a flashing orange light on the monitor.
I don't have anything else to test the monitor on, nor do I have access to another monitor to plug into the Mac Mini - I only have an old iBook G4, so don't have the right adaptors to plug the VGA from the monitor into that.
So before I run out and buy a new monitor, what is the best way to determine where the problem lies.
Hi, I've actually never had any issues waking this monitor from sleep, this is the first time that it has been unresponsive and I've had it for years - probably over 10! (E151FP) so probably overdue for replacement.
To be honest I'd rather not just switch the Mini off unless it's a last resort given that other than the lack of a picture everything else seems to be working ok - still hearing all the normal noises of Skype, Mail and TimeMachine etc.
Similar Messages
-
I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?
More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed
-
Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and TC. I tried to set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or direct to my wireless router but nothing. Just a flashing orange light. Help for a simpleton please. Have tried reseting TC, but to no avail.
Just updated from 10.6.7 ---> 10.6.8 and had the same issue. Despite having done a clean install from 10.6 and got everything back off my TC, now Time Machine can't find it!
Green light is on, ethernet cable conected, network CP says its conected but nothing. Airport Utility can't find it. Hit reset button, Orange flashing light but still no show in Airport Utility.
But I know its there, as rebooting from 10.6 SL disk shows the backups are still ok?
Hmm, ideas anyone?
SBB -
I have problem with my iphon4s wifi stop working
My iphone4s wifi stop working after updating with new software ios6
try the old fashioned trouble shooting step of resetting ur router and modem. unplug them, wait 30 seconds, plug them back in.
-
My Iphone 4 is very good until last Thursday, I used it from sep 2011 without any problems, My problem is the battery is down without any warning and working after 100% then 82% then 50% then 30% and down these things throw less than two hours
what can I do with that??
Also, I live in Cairo,Egypt
waiting your recommendationsHi,
"But it didn't work it's just turning them to black gray scale colors not what i was thinking about."
If you want it to be colored, you'll need to create a color-palette for the 8bppIndexed bitmaps. The keyword for this process is "Color-Quantization".
The whole yellow-green pie you get is from the wrong format. If you convert the 32bpp bitmaps to 24 bpp bitmaps, you loose the alpha channel ("transparency"). You can manually set one color to "transparent" with the mMakeTransparent-method
of the Bitmap class, or simply use gif-images (they are 8bpp with a transparent "key"-color)
Regards,
Thorsten -
Airport Express suddenly stopped working ... no flash, no light.
And it's out of warranty. No flash, no light, it's not the fuse in the plug. Any ideas on what to do?
Sorry guys, I don't mean to give you a hard time, and I know I'd feel the same as you if it was my kit that was fried. Think I must have just finished reading the iPod nano article, where Apple has been slated for refusing to replace nano's that have surface scratches, even though they're still under warranty. It sounded like the usual story, consumer has purchased it, put it in their back pocket, sat down on it, put it through the washing machne and wondered why it was scratched. Funnily enough, I've kept mine in a old sock when not in use, and I've never been so stupid as to put it in my back pocket, clean it once a month and it's still as good as new.
Doesn't help your issue though, but an EU directive might. Not sure when it came into force, and I can't remember which articles it refers to explicitly, but consumer electrical goods sold in the EU must carry a minimum 3 year guarantee. I think that only applies to "white goods", fridges, washing machines, etc. But there was another part where they must have a minimum guarantee period of 2 years, for more general electrical goods. -
I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
New laptop, load itunes to find a error message that states, "i tunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". It has me stuffed on such a problem that should be easy to load. Please help!!!!
Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling -
Can't launch the organizer in Elements 13. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." This happed with Elements 11, too.
juliana
Do you have any version of Premiere Elements 13 or only Photoshop Elements 13 which comes with Elements Organizer 13?
Let us look at the following for Elements Organizer 13....
1. Deletion of disabling the Elements Organizer 13 setting file which is named psa.prf. In Windows 7, 8, o 8.1 64 bit, it is found in the
path
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Elements Organizer
13.0
Organizer
and in the Organizer Folder is the psa.prf file that you delete or disable by renaming it from psa.prf to psa.prfOLD.
2. If the above gains you successful entry into the Elements Organizer 13, then you can
a. create a new catalog
and/or
b. repair or optimize the current one
See Elements Organizer 13/File Menu/Manage Catalogs/Catalog Manager.
3. There are times that certain formats will bring the Elements Organizer down when you try to import those formats into
it. But, from what you wrote, your current problems do not sound media related.
3. At your earliest opportunity, please update Elements Organizer 13 to 13.1 using its Help Menu/Updates.
Please review and consider and then let us know the outcome.
Thank you.
ATR -
I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working!
How could this have happened and what can I do to get it running again?Didnt realize there was a response, late getting back to you.
Save your process files outside of the NI progam directory (you should have external backups already right ). THey should not be deleted.
Any customizations to the lookout.ini and lookout.sec file may be lost.
Mike
Forshock - Consult.Develop.Solve. -
Bought my iPhone in march with working sim just stopped working yesterday. Has been saying searching since yesterday what do I do?!!
is restart dont help
http://www.apple.com/support/iphone/assistant/phone/#section_1
then I would return it under warrenty -
Hi,
I’m getting the following error message when ever I try to start cs6 and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Please advise what is the problem? and How to sort this out?
OS Name
Microsoft Windows 8.1 Pro
Version
6.3.9600 Build 9600
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
JARVIS
System Manufacturer
Dell Inc.
System Model
Inspiron N5110
System Type
x64-based PC
System SKU
To be filled by O.E.M.
Processor
Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A11, 8/3/2012
SMBIOS Version
2.6
Embedded Controller Version
1.01
BIOS Mode
Legacy
BaseBoard Manufacturer
Dell Inc.
BaseBoard Model
Not Available
BaseBoard Name
Base Board
Platform Role
Mobile
Secure Boot State
Unsupported
PCR7 Configuration
Binding Not Possible
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.3.9600.17196"
User Name
Jarvis\JARVIS\Abhishek
Time Zone
India Standard Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.16 GB
Available Physical Memory
1.21 GB
Total Virtual Memory
3.72 GB
Available Virtual Memory
1.55 GB
Page File Space
576 MB
Page File
C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
Display adapters:
and NVIDIA GeForce GT 525M.Without the actual crash logs nobody can say, but chances are that your graphics hardware is to blame, so update the driver...
Mylenium -
CX623 external monitor stopped working
Hello everyone,
we have a CX623 which has worked fine for years. This week the external DELL monitor stopped working. It just goes into power save mode.
The monitor and cable work if plugged into a different laptop.
A different monitor which is ok doesn't work when plugged into the CX623.
So it's 100% an issue with the laptop. Pressing Fn+F2 to change the monitor configuration doesn't resolve the issue.
The laptop does recognise the monitor and correctly names it in the display resolution settings.
Any suggestions please?That really sounds strange....most likely it's something internal to the notebook. And honestly, there probably isn't any easy way to fix it other than replacing the motherboard.
-
IMac External Monitor stopped working
I have an Intel based iMac and have been running my old 17inch apple monitor as a second display for over a year now. For no apparent reason today the monitor stopped working. The screen just appears black. there is power getting to it as the power light is on and the computer detects the display fine. I can even move objets to that monitor, I just cant see anything. Any helps would be appreciated.
thanks
JoeYep, have the same problem using a 3rd party cablesson mdp-hdmi adapter. Everything worked fine until quite recently. I have tried pretty much everything to fix it but nothing seems to work. I'm almost convinced it's an OS problem, as everything works fine when I boot into my windows bootcamp partition.
Apple, please get this sorted! I'm reluctant to shell out $35 only to find that I have the exact same problem with the official adapter. Though I probably will anyway because I urgently need to get my display working again. -
Reference Monitor Stopped Working
While working on a project I had to use "Interpret footage" to change the frame rate and pixel aspect ratio on a clip. After making the change, my reference monitor stopped working correctly.
Prior to making the above frame rate change, I was using the reference monitor for a waveform analysis which would play smoothly on both the Program and Reference monitors. Once I made the clip change, I lost the ability for the reference monitor to play smoothly-- it only holds an image of a single frame. In order to see the clip play I have to hold down the right arrow button. The program monitor works fine. And yes, it is set to gang.
The interpret footage command screwed something up. Any ideas?
I'm using Premiere CS2 with XP Pro Service Pack 3. NVIDIA Quadro FX 1400 card, AMD Dual Opteron 254 processors on a Tyan Thunder mobo.Hey,
I had this exact same problem!
I know this is an old thread, but just incase someone comes along here looking for a working solution,
Liquid80 from http://forums.adobe.com/thread/688529
posted this answer,
"Then for some reason I decided to click on "Window" on the menu bar without even thinking and then clicked "Program Monitor"!!! PROBLEM SOLVED!!!
There are TWO different views. One called "Program Monitor" and the other called "Reference Monitor" and the annoying thing is they look nearly identical but function differently!!!
So all this time you had "Reference Monitor" open instead of "Program Monitor"."
All the best
Maybe you are looking for
-
I think I have tried everything I could find/think of to get this to work. I can connect it to my stereo and stream music fine but the internet won't work. I really just want it to join/or extend so that my internet connection remains intact and I ca
-
Hi all plz any one send me the doc for Module pool programmiing to learn on my own thanks & regards vamsin
-
Ipod doesn´t support Apple Lossless Audio Codec with high bitrates?
Has anyone tried playing back .m4a files with bitrates in the range of 800-850 kbit/s succesfully? I have a recent 30Gb and a 4Gb Nano both with latest firmwares, but neither of them will play my files without hanging/restarting. Specifications claim
-
Error as Deficit in Sales Order stock in VL02N
Hi Experts, We have a problem while doing PGI in VL02N we are getting below mentioned error as Deficit in Sales Order stock. We have analyzed and found that although GR for PO is done, the Customer stock for Sales is not getting
-
My iPad Mini is not turning on
Hi I need help! Last night I went to go get my iPad Mini that I have had for a year. It would not turn on and it was on 50 % I pressed the home button and power and it still would not turn on so I plugged it in to charge and nothing happened. The wei