Problem with a function of Dreamweaver Cs4

Hi. Excuse me for my bad Inglish, but i am italian. I have a
problem with Dreamweaver CS4. Before I have used the last version,
CS3 and there were a function call image viewer (Insert >
Multimedia objetcts > Image Viewer). In this new version, this
function there is not. It's possible create the same effect with
another function?
Thank's

The size of one line is 1024.
if(bArray.length == 1023){
out.write(bArray);
byte[] temp = new byte[1];
temp[0] = 100;
out.write(temp);
}else{
out.write(bArray);
In the 27 row the JCO trim the length of the line to 1023 bytes. The last byte is 100.
And for this Problem I add the byte.
Regards
Thomas

Similar Messages

Error thread java : problem with the function "resume 0x***" (forum sun)

One problem with the function of jdb occured when I tried to use it to
pilot the processor with differents threads. In fact, I use a simple example with 2 threads.
I stop the two threads with two breakpoint, and I want to resume one or the other (with the function "resume 0x****"), the one wich I resumed stop again on the breackpoint and I decide again to resume one or the other. All of that to obtain a tree of execution.
I give you the code of the class and the code of jdb.
CLASS: (it's just a object Room with a variable degre that I increment and decrement with two threads increase and decrease)
public class Test{
     public static void main(String[] args){
          Room r = new Room();
          decrease de = new decrease(r);
          increase in = new increase(r);
          de.start();
          in.start();
class Room {
     private volatile int degre=20;
     public void more(){
     degre += 4;
     public void less(){
     degre -= 3;
class decrease extends Thread{
private Room room;
public decrease(Room r){
          room =r;
public void run(){
try{
     while (!interrupted()){
          room.less();
catch(InterruptedException e) {}
class increase extends Thread{
private Room room;
public increase(Room r){
     room =r;
public void run(){
     try{
          while (!interrupted()){
               room.more();
catch(InterruptedException e) {}
JDB:
Initializing jdb ...
stop at Test:7Deferring breakpoint Test:7.
It will be set after the class is loaded.
runrun Test
Set uncaught java.lang.Throwable
Set deferred uncaught java.lang.Throwable
>
VM Started: Set deferred breakpoint Test:7
Breakpoint hit: "thread=main", Test.main(), line=7 bci=30
7 in.start();
main[1] stop at room:16
Set breakpoint room:16
main[1] stop at room:20
Set breakpoint room:20
main[1] resume
All threads resumed.
>
Breakpoint hit: "thread=Thread-0", room.less(), line=20 bci=0
20 degre -= 3;
Thread-0[1] threads
Group system:
(java.lang.ref.Reference$ReferenceHandler)0x10d Reference Handler cond. waiting
(java.lang.ref.Finalizer$FinalizerThread)0x10c Finalizer cond. waiting
(java.lang.Thread)0x10b Signal Dispatcher running
Group main:
(decrease)0x146 Thread-0 running (at breakpoint)
(increase)0x147 Thread-1 running (at breakpoint)
(java.lang.Thread)0x148 DestroyJavaVM running
Thread-0[1] resume 0x147
Thread-0[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] resume 0x147
Thread-1[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] print degre
degre = 24
Thread-1[1] resume 0x146 //It's here the problem, thread 0x146 have to stop on the //next breakpoint of decrease but nothing happen
Thread-1[1] resume 0x147
Thread-1[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] clear
Breakpoints set:
breakpoint Test:7
breakpoint room:16
breakpoint room:20
PS: I tried many other examples with other class and other kind of breakpoints, but, in any cases, on thread doesn't manage to resume. When I try with general resume (no specification of the thread), It works but it isn't interresting for me because I want to decide wich thread continue his execution.

Hi,
I have read the FAQ of the JMF.
The problem was the jar files of the JMF were not in the JRE\BIN\EXT
folder of the Java runtime!
now it works!
thanks
Reg

Problems with Italian version of Dreamweaver [subject edited by moderator]

The italian version of this software doesn't match with the configurations in the tutorials and it's impossible to follow the procedure to learn how to use it!! I've spent more than two hours just to put the "split working area" in vertical with no results. No way to open the same tools. And then, where are the assets files to download??? I think it could be a wonderful idea give us something easier to learn, simply having giving us the right correspondence between the software (open for the first time after the download) and the video tutorials…please, in this condition I cannot work and so how can I do?
Ciao
Paolo

Dear Murray,
unfortunately I can't go on with this program…it's impossible without the CSS file showed on the tutorial…I've also tried to find something on the web and I've tried to install Adobe Widget Browser but it doesn't work!
So I've lost a lot of hours and I'm very frustrated and disappointed…and then the Dreamweaver CC version I've downloaded from Creative Cloud is different from the one in the tutorials, so I can follow all the indications without stop and start searching somewhere the things…
In this condition it's impossible to learn how to use this software…it's an incredible waste of time…and paying for that!!
Il giorno 01/mar/2015, alle ore 20:17, paolo <[email protected]> ha scritto:
I'm using just CC…
Il giorno 01/mar/2015, alle ore 16:46, MurraySummers <[email protected]> ha scritto:
>>
>> Problems with Italian version of Dreamweaver
>> created by MurraySummers in Dreamweaver support forum - View the full discussion
>> Different language versions of the same version of DW are the same. What I mean by that is that no matter which REGIONALIZED version you are using, the interface should be the same. So even though you say you are using DW CC, is it CC2014, or CC2014.1, or just CC that you are using? (you can tell by looking under HELP > About Dreamweaver)
>>
>>
>> On this page - How to make and style a web page in Dreamweaver | Adobe Dreamweaver CC tutorials - there is a link to download the sample files right under the "Browse Dreamweaver CC Tutorials".
>>
>> If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7240860#7240860 and clicking ‘Correct’ below the answer
>> Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
>> Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7240860#7240860
>> To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
>> Start a new discussion in Dreamweaver support forum by email or at Adobe Community
>> For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
>

Problem with 'GetType' Function calling in MSVC++

Hello
I have problem with the function in TestStand API .
When I call the function " GetType " with the following statements in
a DLL called from TestStand (NI) implemented in MS VC ++
, it does not work and this exception is caught by the ONLY ' try catch ' block
to catch exceptions in TestStand API giving the error message
" Unexpected operating system error".
VARIANT_BOOL ok;
VARIANT_BOOL hi;
BSTR Name;
PropertyObject *property = (*step_)->AsPropertyObject();
( *step_ is a STEP Object of type Step* *step_ )
property = property->GetPropertyObject( "TS.SData", 0);
enum TS:ropertyValueTypes i = property->GetType( "" , 0 , &hi , &ok
, &Name);//Problem
Please solve my problem.
You can email me at [email protected]
Thankyou very much.
Best regards
Fahad Ejaz

Hello,
The problem is that the Name is not initialized (the BSTR is defined as OLECHAR*). Thus, replace the
BSTR Name;
declaration with the following lines:
char buf[1024];
BSTR Name = _bstr_t(buf);
This should solve the problem.
Best Regards,
Silvius
Silvius Iancu

Problem with CONTAINS function

Hi all!!
i got a problem with contains function. i'm running oracle 11g.
if i execute this query:
SELECT x.lid as id, x.sztitular as titular, e.szname as proName, x.szresumen as resumen, b.sztitle as catName,
f.szname as secName, d.szname as cliName, x.datecreation as datecreation
FROM CPR_PRACTICAL_CASE x,ctg_category b, CPR_CLIENT d, pro_product e, CAT_SECTOR f, CPR_PCASE_PRODUCT g, CPR_PCASE_SECTOR h,
PRO_PRODUCTCATEGORY i WHERE x.lid = g.lpcaseid and e.lid = g.lproductid and x.lid = h.lpcaseid
and f.lid = h.lsectorid and x.lclientid = d.lid and i.lproductid = e.lid and b.lid = i.lcategoryid
AND x.szlocale = 'es-ES' AND x.bavailable = '1'i get 1 row as result with the column sztitular = "rodillos de medidas"
if i only add one more sentece to that query:
AND CONTAINS( x.sztitular, 'rodillos',1) >0the query returns an empty set.. i really don't understand why because the term "rodillos" is present in the row's column called "sztitular"...
i've put an index on that column:
create index ITXT_TITULAR on CPR_PRACTICAL_CASE(sztitular) INDEXTYPE IS CTXSYS.CONTEXT;any help?
many thanks!!!!
Edited by: ElMazzaX on May 21, 2012 5:51 PM
Edited by: ElMazzaX on May 21, 2012 5:53 PM

How are you synchronising the index?
http://docs.oracle.com/cd/E11882_01/text.112/e24435/ind.htm#i1008452
Also see the Oracle Text forum:
Text

Performance problem with OLE_FLUSH_CALL function module

Hello Everyone,
I am facing problem with OLE_FLUSH_CALL function module (execution is taking long time which is going to be dump error).
Could you please help me in knowing solution for this problem?
Thanking you in advance.
Srinivas

Hi Srinivas,
the OLE_FLUSH_CALL does an RFC from ABAP backend to frontend UI. So high execution time could result from high network time, for example latency between UI and backend server.
How many UI interaction steps did you measure for the trace above? Ideally, there should only be one OLE_FLUSH_CALL per user interaction step. If its more, the application is not written in an optimized way.
Best Regards, Randolf

For users having problems with Mail functionality...

Hello! I have been having problems with Mail functionality as well, so, I took a few steps to see if I could solve the problem on my own.
My problems were:
Mail would freeze when sending mail, or, when I pressed quit, it would freeze.
If I toggled between inboxes too much it would freeze up.
Even after trying the many techniques others offered on this board, Mail still froze up. So.. here's what I did:
1.) Turn off the auto-retrieve mail function in the preferences/general menu. Set it to a manual check. Just check it yourself every once in awhile. It may not be as convenient, but it works, trust me.
2.) Under the fonts and colors menu, set all three fonts to the SAME font (mines Century Schoolbook, but anything works) and turn off fixed-width font. Sometimes mail has a tough time decoding and working with texts, and causes it to freeze.
3.) Clean our your main inbox! Place the emails that you want to keep, but don't need to be in your inbox in a new folder on your inbox bar (mines aptly named 'Saved Messages.' That way, when you open up Mail to your default account, it doesn't have 1,000+ messages to index. Also, try to keep the inboxes from having more than 100-200 messages per. It seems to frown on any more than that.
After trying these three easy, steps, restart mail and see if things run smoother. I have had no problems since these changes, and mail runs a ton better. Plus you don't have to worry about deleting your library/mail folder anymore. Let me know if things work out so I can see if my theory is a universally proven thing. Thanks and good luck!
iMac G5 20" Mac OS X (10.4.5)

Good question. I have worked very little with IMAP other than as a testing device, so, on a daily routine I cannot say how it would function. However, I can only expect that by having the option to download all emails for offline viewing selected, you are right in it being a lag creator. Another suggestion would be, if you are running a single-computer setup, to have the account delete emails from the server after recieving them on your computer. Thus, you reduce the risk of repeat downloads or unnecessary build-up on the server end. DO NOT select this option if you run multiple computer set ups on one AppleMail account system or you will cause some discrepancies and/or data loss from system to system. Or, if you have emails redirected from a seperate server to Mail (i.e. I redirect mail from my university email account into Mail so that I don't have to go to the web-mail site to check it--> just like Gmail or Yahoo etc etc) you won't be able to check them from the web-based email system if you have the system delete them. Ok that sounded confusing. Solution: have the system remove emails from the server after a week (or any period of time, just not immediately) so that, in the off-chance you need to use the online system, you will have access, and will give you a chance to check the emails on other systems without a threat of data corruption (by corruption i mean that frustrating feeling you get when you can't find that super important email that was in your inbox just 10 seconds ago on your desktop etc.)
I will see if I can learn anything more about IMAP Ernie. Its definitley the biggest problem source for Mail, POP and .Mac being simple and functional as long as you don't play with the settings too much. As far as the issue of Offline viewing goes, try turning it off and seeing how Mail functions.
BEFORE you turn it off, however, I recommend saving all of your emails in your inbox as a text file or something so, in case the server burps and has a brain flatuence, you don't lose anything. Been there, done that, thrown the books against the wall in a frustrated rage.
My only reserve about the Offline Viewing is whether or not Mail will, when you click "recieve mail," have to re-download the emails from the server each time. If so, then it may end up taking longer and lagging more. The issue here is obviously minimizing the amount of activity between Mail and the email server without jeapordizing information on the server or multiple Mail programs on the same account. When we can find that balance, I think Mail's potential will be realized. Keep the questions coming.

Cursor problems with new mac pro and cs4

I am having a major problem with my cursor in photoshop cs4 extended.
any tool i select as soon as i touch it to the canvas the tool turns to a black mac arrow cursor.
this is extremely annoying and makes brushing anything almost impossible as i can't see the edge of my brush because it turns to an arrow as i try to use it. (it starts out at the correct size before i actually brush with it)
i have my brush set as normal and precise tools are set but this problem happens with any brush and tool setting
I have tried turning off Open GL advanced redraw, all that.
I have the stock nvidia gt 120 - is it a video card problem? should i have gotten the ati 4870?
should i reinstall cs4?
my system is a base octo 2.26 with 6 GB ram - no scratch disk setup yet - waiting on the drives and more ram to come.
thanks all...

um...not to detract from the other users problem but mine has nothing to do with displacement of the cursor
i have uninstalled CS4 suite, reinstalled it, repaired permissions and deleted prefs.
I am still getting the arrow whenever I click the cursor with any tool to the canvas.
I am a pro p-shop retoucher - this is making CS4 essentially UNUSABLE - i will only be able to use CS3 and all this after I spent 600 for the "upgrade"?
I have to teach at a retouching seminar soon and i will have a very poor working knowledge of CS4 as a result
I can't find any similar complaints at nvidias site or on here
any help is still needed!

Problem with type engines in both CS4 & CS5

Hello,
I'm having a strange problem with the type engines in CS4 and 5.
Currently I cannot insert the cursor into the last line of any block of text in order to make edits.
When I try to insert the cursor into the last line it affects only the next-to-the-last line and not the intended line.
Please help.
Thanks for your consideration,
cobaltgreen

Hello,
I'm having a strange problem with the type engines in CS4 and 5.
Currently I cannot insert the cursor into the last line of any block of text in order to make edits.
When I try to insert the cursor into the last line it affects only the next-to-the-last line and not the intended line.
Please help.
Thanks for your consideration,
cobaltgreen

Problem with BAPI_SALESORDER_CHANGE function module

I know lot of posts have been done about problems with this function module. However I was not able to find the answer to my problem. Hence posting a new thread
I have the following code which changes the reason rejection (if required to 'ZF') and also updates the sales order quantity.
The code works absolutely fine as long as the PGI date of the order item is either today or in the future. However if the PGI date of the order item is in the past. I get an error in the t_return table with error type 'E' saying 'PGI date is in the past hence could not update the item'.
If I try to update the same order quantity in VA02 for the item with PGI date in the past it does so without any problem.
Can someone please suggest what the problem might be. Or if there is some other way I can update the quantity. (I dont want to use BDC)
FORM change_sales_order_item USING value(r_rtb_posnrs) TYPE zpsd_ztsdrtb_ro_track
                             CHANGING r_return TYPE type_t_bapiret2.
DATA: v_order_header_in TYPE bapisdh1,
v_order_header_inx TYPE bapisdh1x,
t_schedule_lines TYPE bapischdl OCCURS 0 WITH HEADER LINE,
t_schedule_linesx TYPE bapischdlx OCCURS 0 WITH HEADER LINE,
v_temp_rtb_vbeln TYPE vbeln,
v_temp_rtb_posnr TYPE posnr,
wa_old_rtb_posnrs TYPE ztsdrtb_ro_track,
t_item_in TYPE bapisditm OCCURS 0 WITH HEADER LINE,
t_item_inx TYPE bapisditmx OCCURS 0 WITH HEADER LINE,
v_rtb_old_vbeln TYPE zrtbvbeln,
v_rtb_old_posnr TYPE zrtbposnr,
v_ro_old_vbeln TYPE zrovbeln,
v_ro_old_posnr TYPE zroposnr,
v_rtb_count TYPE i,
v_next_row_index TYPE i,
v_update_order_flg TYPE char1, "Update the sales order flag
v_rtb_record_counter TYPE i,
v_original_vbeln TYPE vbeln,
t_bapiret TYPE STANDARD TABLE OF bapiret2.
FIELD-SYMBOLS: <wa_r_rtb_posnrs> TYPE ztsdrtb_ro_track,
                 <wa_r_rtb_posnr_next> TYPE ztsdrtb_ro_track.
CONSTANTS: c_updateflag TYPE bapisditmx-updateflag VALUE 'U'.
v_order_header_inx-updateflag = 'U'.
Get rid of the duplicate records for the same RTB order. Just use
the last record quantity in the internal table
LOOP AT r_rtb_posnrs ASSIGNING <wa_r_rtb_posnrs>.
    v_rtb_record_counter = v_rtb_record_counter + 1.
    <wa_r_rtb_posnrs>-seqnr = v_rtb_record_counter.
ENDLOOP.
SORT r_rtb_posnrs DESCENDING BY zrtbvbeln zrtbposnr seqnr zrtbconsumedflg.
DELETE ADJACENT DUPLICATES FROM r_rtb_posnrs COMPARING zrtbvbeln zrtbposnr.
DESCRIBE TABLE r_rtb_posnrs LINES v_rtb_count.
v_rtb_record_counter = 0.
v_update_order_flg = space.
LOOP AT r_rtb_posnrs ASSIGNING <wa_r_rtb_posnrs>.
    v_rtb_record_counter = v_rtb_record_counter + 1.
    v_update_order_flg = space.
Popluate the item quantity update flags for schedule lines
    t_schedule_linesx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
    t_schedule_linesx-sched_line = '0001'.
    t_schedule_linesx-updateflag = c_updateflag.
    t_schedule_linesx-req_qty = 'X'.
    APPEND t_schedule_linesx.
    CLEAR t_schedule_linesx.
*Item (Order QQuantity Field to be changed "KWMENG")
    t_schedule_lines-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
    t_schedule_lines-sched_line = '0001'.
    t_schedule_lines-req_qty = <wa_r_rtb_posnrs>-zrtbchgqty.
    APPEND t_schedule_lines.
    CLEAR t_schedule_lines.
If fully consumed then set the rejection flag
    IF <wa_r_rtb_posnrs>-zrtbconsumedflg = 'X'.
      t_item_inx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_inx-updateflag = 'X'.
      t_item_inx-reason_rej = 'X'.
      APPEND t_item_inx.
      CLEAR t_item_inx.
      t_item_in-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_in-reason_rej = 'ZF'.
      APPEND t_item_in.
      CLEAR t_item_in.
    ELSE.
      t_item_inx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_inx-updateflag = 'X'.
      t_item_inx-reason_rej = 'X'.
      APPEND t_item_inx.
      CLEAR t_item_inx.
      t_item_in-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_in-reason_rej = ' '.
      APPEND t_item_in.
      CLEAR t_item_in.
    ENDIF.
If you have reached the last line of the RTB intern table update the sales order
*Index pointing to the next row
    v_next_row_index = v_rtb_record_counter + 1.
    IF v_rtb_record_counter = v_rtb_count.
      v_update_order_flg = 'X'.
    ELSEIF v_rtb_record_counter < v_rtb_count.
Get the next row data
      READ TABLE r_rtb_posnrs INDEX v_next_row_index ASSIGNING <wa_r_rtb_posnr_next>.
      IF sy-subrc = 0.
        IF <wa_r_rtb_posnrs>-zrtbvbeln <> <wa_r_rtb_posnr_next>-zrtbvbeln.
          v_update_order_flg = 'X'.
        ENDIF.
      ENDIF.
    ELSE.
      v_update_order_flg = space.
    ENDIF.
update the rtb orders with quantities and the rejection flag (if required)
    IF v_update_order_flg = 'X'.
      CALL FUNCTION 'BAPI_SALESORDER_CHANGE' STARTING NEW TASK 'SOUPDATE'
        PERFORMING callbk_bapi_salesorder_change ON END OF TASK
        EXPORTING
          salesdocument    = <wa_r_rtb_posnrs>-zrtbvbeln
          order_header_in = v_order_header_in
          order_header_inx = v_order_header_inx
        TABLES
          return           = t_return
          schedule_lines   = t_schedule_lines
          schedule_linesx = t_schedule_linesx
          order_item_in    = t_item_in
          order_item_inx   = t_item_inx.
      WAIT UNTIL t_return[] IS NOT INITIAL.
      READ TABLE t_return INTO wa_return WITH KEY type = 'E'.
      IF sy-subrc <> 0.
      ELSE.
        r_return[] = t_return[].
        MESSAGE ID 'ZSD' TYPE 'E' NUMBER 613.
       RAISE errorinorderupdate.
      ENDIF.
      REFRESH t_schedule_linesx.
      REFRESH t_schedule_lines.
      REFRESH t_item_in.
      REFRESH t_item_inx.
      REFRESH t_return.
    ENDIF.
ENDLOOP.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
   IMPORTING
     return = t_bapiret.
ENDFORM.                    "Change_Sales_Order

see the following example and try to do this:
i_hdrx-updateflag = 'U'.
*" Fill required SCHEDULE_LINES data.
i_sched-itm_number = p_posnr.
i_sched-sched_line = p_etenr.
i_sched-req_qty = p_reqqty.
i_schedx-updateflag = 'U'.
i_schedx-itm_number = p_posnr.
i_schedx-sched_line = p_etenr.
i_schedx-req_qty = 'X'.
APPEND i_sched.
APPEND i_schedx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = p_vbeln
order_header_in = i_hdr
order_header_inx = i_hdrx
TABLES
return = i_ret
schedule_lines = i_sched
schedule_linesx = i_schedx.

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Tell Apple about it: http://www.apple.com/feedback/iphone.html
Be sure to give as much detail as possible.
I would also check LG's site.

Hello i have a problem with onfocus function on ipad. i am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

Hello i have a problem with onfocus function on ipad. I am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

Problem with JavaScript snipet that DreamWeaver is writing

I am having a problem with code that DreamWeaver (CS3) is
writing. I'm fairly certain the problem is in a small piece of
JavaScript that DreamWeaver is composing.
This is a fairly complex problem, so bear with me.
First - What I am trying to make happen: When on a page on my
site (the-oilman.com) I want a link that opens a new window in the
on-line store at a different site (AMSOIL.com). I need to leave
both the page on my site open and have this 'store' page open.
First of all this is working fine, using the 'Open Window'
'behavior' in DreamWeaver. If someone wants to change windows (or
tabs) and go back to my page, leaving the 'store' window open also
- the problem is set up to happen. If from back at my site, you
click on the same or a different link that goes back to the 'store'
either on the same page or a different page at AMSOIL.com - the
'store' window goes to the correct page, but the 'store' window
does NOT come on top. When they click on a link to go back to the
'store' I need the 'store' window to come to the top. If they have
previously put something in the cart, and come back and add
something else to the cart in the 'store' by coming in from
different links on my site the 'store' is working correctly because
I leave it open the whole time.
snipets of code that DreamWeaver is writing for my site
(the-oilman.com):
from the head:
<script>

</script>
code from 2 different links that is using this script:
<a href="
http://www.amsoil.com/redirect.cgi?zo=52257&page=storefront/sso"
target="store" onClick="MM_openBrWindow('#','store','')"
csclick="10D39F40">Buy Now</a>
<a href="
http://www.amsoil.com/redirect.cgi?zo=52257&page=store"
title="AMSOIL Store at AMSOIL.com" target="store"
onClick="MM_openBrWindow('http:www.amsoil.com/redirect.cgi?zo=52257&page=store','stor e','')">On
Line Store</a>
I believe what I need is a longer javascript. Instead of just
"window.open" I need an "if" but my javascript knowledge is very,
very limited.
I need it to first check that if the window named 'store' is
open then 'focus' it, or if it is not open to open the window named
'store'.
Will this fix my problem? If so, please help me write the
lines of code to do it.
If this isn't the solution, what is the problem and the
solution?
A separate question but related: if you look in the two
different links codes, in the function call one of them uses a
'null' page reference and the other repeats the full link reference
from the href= . Both seem to work, but which is the correct or the
preferred syntax. My guess is there are some browsers that this
will give a problem, but which way is preferred.
Don Dawson
mailto:[email protected]

Create a new page. Try to apply this same behavior to a link
on that new
page. Look at the code. Can you reproduce the problem there?
The code you
show below has oodles of GL stuff in it. Do you need that GL
markup?
What operational sequence did you go through to get this
behavior call?
onClick="MM_openBrWindow('#','store','')"
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"pad graphics" <[email protected]> wrote in
message
news:[email protected]...
>I am having a problem with code that DreamWeaver (CS3) is
writing. I'm
>fairly
> certain the problem is in a small piece of JavaScript
that DreamWeaver is
> composing.
>
> This is a fairly complex problem, so bear with me.
>
> First - What I am trying to make happen: When on a page
on my site
> (the-oilman.com) I want a link that opens a new window
in the on-line
> store at
> a different site (AMSOIL.com). I need to leave both the
page on my site
> open
> and have this 'store' page open. First of all this is
working fine, using
> the
> 'Open Window' 'behavior' in DreamWeaver. If someone
wants to change
> windows (or
> tabs) and go back to my page, leaving the 'store' window
open also - the
> problem is set up to happen. If from back at my site,
you click on the
> same or
> a different link that goes back to the 'store' either on
the same page or
> a
> different page at AMSOIL.com - the 'store' window goes
to the correct
> page, but
> the 'store' window does NOT come on top. When they click
on a link to go
> back
> to the 'store' I need the 'store' window to come to the
top. If they have
> previously put something in the cart, and come back and
add something else
> to
> the cart in the 'store' by coming in from different
links on my site the
> 'store' is working correctly because I leave it open the
whole time.
>
> snipets of code that DreamWeaver is writing for my site
(the-oilman.com):
> from the head:
> <script>
> 
> </script>
>
> code from 2 different links that is using this script:
> <a href="
http://www.amsoil.com/redirect.cgi?zo=52257&page=storefront/sso"
> target="store" onClick="MM_openBrWindow('#','store','')"
> csclick="10D39F40">Buy
> Now</a>
> <a href="
http://www.amsoil.com/redirect.cgi?zo=52257&page=store"
> title="AMSOIL
> Store at AMSOIL.com" target="store"
>
onClick="MM_openBrWindow('http:www.amsoil.com/redirect.cgi?zo=52257&page=sto
> re','store','')">On Line Store</a>
>
> I believe what I need is a longer javascript. Instead of
just
> "window.open" I
> need an "if" but my javascript knowledge is very, very
limited.
> I need it to first check that if the window named
'store' is open then
> 'focus'
> it, or if it is not open to open the window named
'store'.
> Will this fix my problem? If so, please help me write
the lines of code to
> do
> it.
> If this isn't the solution, what is the problem and the
solution?
>
> A separate question but related: if you look in the two
different links
> codes,
> in the function call one of them uses a 'null' page
reference and the
> other
> repeats the full link reference from the href= . Both
seem to work, but
> which
> is the correct or the preferred syntax. My guess is
there are some
> browsers
> that this will give a problem, but which way is
preferred.
>
> Don Dawson
> mailto:[email protected]
>

Problem with todate function in OBIEE.

Hi,
I have some data mismatch while using todate function. There is a measure GWP, and two logical columns MTD and YTD. MTD is todate(GWP, fiscal_month) and YTD is todate(GWP, fiscal_year). whereas sometimes MTD is displaying data and YTD doesn't. Probably it has to display, what is a problem with this? Can anyone help me out!!!
Thanks,
Anitha.B

Hi,
Thanks for your response.
The requirement is, there is a date filter and measure GWP(sum) and when selecting a date it should ensure the following.
1. Daily - GWP of the selected date
2. MTD - GWP from first day of the selected month upto the selected date.
3. YTD - GWP from the first day of the financial year of the date to the selected date.
So created a time dimensional hierarchy fiscal_year, fiscal_month and date_time,date_key(chronological key).
created a filter as
date_time is equal to the date filter
MTD - todate(gwp,fiscal_month)
YTD - todate(gwp,fiscal_year)
There is a discrepency in the result in which sometimes am getting the value for MTD and not for YTD like
22/11/1986
Product Daily MTD YTD
A 0 100 0
B 0 200 300
C 0 350 0
It may not be a problem with the data , then where am I doing mistake? help me.
Thanks,
Anitha.B

Problems with the function DBMS_XMLSCHEMA.copyEvolve

I´m having problems with the evolution of xml-schema.
First the function DBMS_XMLSCHEMA.copyEvolve works correctly, but since one week I get only errors. Strangely is the fact that I use the same files (xml-schema, xslt and xml instances) and the same SQL-Code. Even if I delete all tables, directories, ... with the drop instruction and create them again, I get only error messages. It is also strangely that the function DBMS_XMLSCHEMA.copyEvolve not works if the old and new xml-schema are identical and no XSLT-Stylesheet is handed over. Can by the function DBMS_XMLSCHEMA.copyEvolve something going wrong in the database ? Do I must recreate the database, and how can I do that by the XE? But that can not be a good solution.
Has anybody a idea what can I do?
Here is my error report:
Error starting at line 1 in command:
BEGIN
DBMS_XMLSCHEMA.copyEvolve(
schemaURLs => xdb$string_list_t('http://localhost:8080/internal/xmlschema/testschema.xsd'),
newSchemas => XMLSequenceType(XDBURIType('/public/testschema_evolution.xsd').getXML()),
transforms => XMLSequenceType(XDBURIType('/public/MapTotestschema_evolution.xslt').getXML()));
END;
Error report:
ORA-30944: Fehler beim Rollback für XML-Schema "http://localhost:8080/internal/xmlschema/testschema.xsd" Tabelle "MYUSER"."XMLSCHEMATABELLE" Spalte ""
ORA-02304: Ungültiges Objektidentifizierungsliteral
ORA-30942: Fehler bei XML Schema Evolution für Schema "http://localhost:8080/internal/xmlschema/testschema.xsd" Tabelle <n/a> Spalte ""
ORA-31088: Objekt "MYUSER"."BIN$QNQjNoYiRfC4KlQtnfUpMw==$0" hängt von Schema ab
ORA-06512: in "XDB.DBMS_XMLSCHEMA_INT", Zeile 113
ORA-06512: in "XDB.DBMS_XMLSCHEMA", Zeile 210
ORA-06512: in Zeile 2
Thanks David

Can you try doing the following before running copyEvolve
SQL> purge recyclebin
2 /
Recyclebin purged.
SQL> alter session set recyclebin = off
2 /
Session altered.
SQL>and see if it works as expected.

Problem with a function of Dreamweaver Cs4

Similar Messages

Maybe you are looking for