Problem with a new Zen Visio
Hello :0I just got today my Zen Vision:M and I have a problem After using the player for few minutes the Touch Pad freeze... all the other keys are working, just the Touch Pad freezes.. I tried to reset and no change, I tried to Clean up and again not helping, I tried format.. firmware uninstall/upgrade.. no change.. Is there a solution for this problem or I will have to replace it's?Thanks,Matan
jessevsm wrote:
I got my Zen yesterday, and the player itself works great! And I've installed the software for it, and this is where my problem is. None of the software for it seems to be seeing that the player is connected to my computer. My computer recognizes it's there, and the player says it's docked. But yet when I access the Media Explorer or the other media programs that it came with, none of them recognized that it was there. And another problem that I've been having is it takes 'forever' to get into the Media explorer. I click on it from My Computer, and it takes a couple minutes just to get through. But then it still says that the player isn't connected. I've sent an e-mail to Creative talking about this problem. And I haven't gotten a response. I called earlier today and the person who I talked to said she was sending me a few things through email to fix the problem. But I never got that email for some reason, so now I'm coming here in hopes that someone may know how to fix this problem I'm having. I haven't been able to put any music or anything on my Zen because of the fact I can't get the software to work correctly.
try to uninstall the softwares and install them again with full packages.
Similar Messages
-
Problems with the new Zen Touch Firmw
I'm getting the opposite of the problems other users I read about have with the new firmware: I DON'T want to use MediaSource further but my computer doesn't recognise my Zen Touch as an external hard disk (or Audio Player or anything else I can just drag and drop my music). MediaPlayer is recognising it and on my fathers computer it aso worked.
What should also be said: Right after installing the new firmware it worked but one day later my computer denied doing the same thing as the day before...
I'm quite desperate and I hope you can help me soon.somebody help me.....just doaloading the latest zen touch firmware and Bang....computer crashed, and the fimware that was on the zen deleted...now i can't update no kind of firmware...sys the there?s no device, but in my computer says that exists one zen...
-
I have a zen sleek and am using Rhapsody to Go. I managed to load all of my music, including ripped cds, purchased tracks, and Rhapsody to Go subscription tracks without any problems. I've since?downloaded some more subscription tracks and attempted to do a synchronization. At that point, I got told that my device would run faster if I was using usb 2.0 (I thought I was using it, since I had not gotten a warning the first time). I tried to do the synchronization anyway (later I purchased a brand new usb 2.0 card, which didn't help). It took over a day, and every single track gave me an error message (unable to obtain certificate). I tried with both the zen sleek software, with Rhapsody 3., and with the Creative Mediasource software. Nothing worked (at least the rhapsody program gave me a meaningful error). I looked up the error on the rhapsody help site, and it said I should check the time and date on my player (which I corrected). I tried again, this time with a new usb 2.0 card. I didn't get the same warning, but it still took just as long to tell me that all of the transfers failed. The errors were either "Unable to obtain certificate for device", or "incompatible media type" (they were 60 mbps wma files).
Next thing I tried was to simply drag some files to the device. This time, the first two files I dragged transferred without any error, but after that, every subsequent file gave me errors. This leads me to believe that I there is something else going on. Note that I had zero errors using the old usb . card, so this leads me to believe that the slow speed is due to errors. Does anyone have any suggestions of what I should do or what may be going on? Do I need to reformat the device and start from scratch?Haldur,
Try updating some WMP0 hotfixs from Microsoft website that's meant for PlayForSure stuff. More information in this Knowledgebase article SID793.
Jason -
I just bought a new zen micro this week and have been having a few problems with it. I bought it specifically to use with rhapsody to go and it is replacing an ipod mini so that I can use it with subscription services
I have upgraded the firmware to 2..02 which gives it the plays for sure ability. The problem is that the delay when skipping songs is ridiculous. It takes about 5-7 seconds to skip between songs and is quite annoying. It has also frozen 4-5 times in the past 3 days since I bought it. I haven't tried to reload the firmware as I don't want to go through the hassle of transferrring all my music again 9though I'd be willing to do it if it ixed the problem). Anyone got any ideas or fixes on this or has anyone had similar problems
P.S. I'm also very used to how well my ipod worked, it never delayed or froze or anything in the six months since I bought it, so maybe I'm jsut expecting too muchI have done some more trouble shooting and have some more info on my problem. I did the disk cleanup and reloaded the firmware. Nothing changed, still had the same problems.
So I changed the firmware to the updated non-playsforsure firmware (ver. ..0). It formatted the unit and put the firmware on. I then added some normal mp3's and they worked fine. no delay when skipping songs or anything.
So i then re-updated the firmware to 2..02 (the plays for sure firmware upgrade) and added some of my own normal mp3's. they work fine. i then added some of the wma files i have from rhapsody to go. the problems then started up again. So it seems that one of two things is going on. Either the files that rhapsody is sending are messed up somehow or the way my zen micro handles the wma files isn't right.
Does anyone have the rhapsody to go service? HAs anyone seen similar problems? Any help would be appreciated. -
Problems with second hand Zen visio
Hi I recently sold a zen vision m 30gb, it was working fine when i sold it however i could not find the software that came with the player..... I checked the support page and everything seemed to be there that the buyer would need to get the player up and running...........however the buyer states the player is not charging and he cant get the software from the support page installed as there is no player already installed on his PC.
How can we get the player to work on his PC without have the orginal software I've had a check and can't seem to find any answers using the search function.....please help this is driving me nutsWhat accessories went with it's If a wall charger was one of them good tell them to charge that way if not tell them that the charger for the playstation portable will work with it for charging. They should be using a REAR usb port to charge the player. Try a different usb cord. Buy a new dongle/power cord http://cgi.ebay.com/-ITEMS-ACCESSORY...dZp73.m53.l262 They do not really need the Creative software to use the player it will work with Windows Media Player
Before they can do this function they MUST have 50% power of the battery:.......First have them boot player into recovery mode & do a Cleanup> Format>Reboot on the player & tell them I can't stress this point enough DO NOT CHOOSE RELOAD FIRMWARE!!!!!!! That function erases the firmware & will render the player useless.
http://forums.creative.com/creativel...ap&thread.id=3 Check you private messages. -
hello all.. i have some problems with my NEW nano zen player gb i have put my mp3 on it but only 600 mb of mp3 but i have other 388 mb free but i cannot put other song on it!! why it happens? so on this player i can put only 24 mp3 ? can u help me pls?
sorry for my english i am italianFrom the FAQ:
"I can't seem to fit any more files on my flash player yet I have free space, why?
The MuVo has a limit as to how many files will fit in the root, which is around 30 when formatted as FAT. Delete some files, create folders and use these to organise your collection."
So to fill up the player you need to have many of the files in folders. I suggest that you put all the files in folders. I have a separate folder for each artist on my n200. You can use Windows explorer to create the folders. You will first need to delete a few songs to make room for the new folders, since only around 28 items are allowed in the root.
Message Edited by JK23 on 0-20-2005 08:35 AM -
Major problem with my Creative Zen Touch 20gb pla
I seem to be having some serious problems with my player - the scroll button no longer works, and the right-side buttons (Back, Play/Pause and Forward) all malfunction as well. The main issue is the scroll button - this no longer works at all, and without this function the player is essentially useless in all modes other than 'random' - as I cannot scroll down to choose songs by album, artist, genre etc. Even in 'random' mode, the functionality of the player is negligible - I cannot fast forward a track, as if I hold down the 'forward' button it automatically skips forward to new tracks without the chance to play one of them.
This is not the first time I've had a problem with this particular model - I've had complaints before on this forum about an earlier player I had (same model), a different problem but one that was never fixed - through my own error I misplaced the receipt and was unable to have the player fixed (it was within warranty at the time), so I had to pay ?50 for a replacement - to find that this player is now essentially broken as well has left me disgusted, in honesty. Details of the earlier problems with my former player are at the following link:
http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=5966
As if this wasn't enough, I actually experienced problems with my newer player almost from the off - the data folder malfunctioned, to the extent that files I'd placed in there were unable to be removed - eventually I had to format the player, not only losing important data from the data folder, but also experiencing the inconvience of having to spend many hours putting all my music back onto the player once it had been formatted. This was not a massi've issue, more a minor irritance, but again it's left me wondering what the problem is...is this model notoriously poor performance-wise? Three major errors on two separate players, two of them seemingly fatal to the use of the player, inside the space of just over a year is utterly ridiculous, I think.
At this point, I'd like to know what I can do to get a reimbursement on the cost of my current player, as opposed to a replacement - although I have found the performance of the Zen Touch 20gb to be generally very good, I'm not willing to put up with having each new replacement fail within a year of receiving it. I have lost all confidence in Creative providing me with a player I can rely on, to be honest.
If anyone could point me in the right direction with regards to finding out how I can go about receiving a refund on the price of my player, I'd be very grateful.
Thanks in advance for any help.
Simon O'BrienSimon, this is actually a common problem with the touch. Mine did it about a year after purchase, so I was safe to open it up and fix it. It is actually a really simple fix and is due to a loose connector. I know alot of other people on nomadness.net were having this problem, so I posted a solution here. Hope this helps!
http://www.nomadness.net/modules.php?name=Forums&file=viewtopic&p=42838 -
Problems with Itunes New Version?
Problems with Itunes New Version?
Here is a copy of the error message. Every Time I listen to a song and it end and I go to listen to a new song the Itunes Freeze up. This is on the New Version of Itunes. I have a Windows 7 32bit 3GB Ram 1TB harddrrive Space
<edited by host>
Thanks,
<edited by host>
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 1
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 0
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0There certainly is a problem with itunes. I downloaded 9.2 and now it won't open. It won't recognize my iphone, either. I uninstalled it in the order recommended by the site, no joy. Deleted a configuration file, no joy. System Restore, no joy. All other software and hardware on the machine is working fine. I call AppleCare AND a local store, either they are completely clueless (which I doubt), or they have no idea how to fix it. I can't even back up my phone, or use the ipod. And since no one at Apple seems to care enough, I'll have to wait until the clamor is loud enough for them to even admit to a problem before I can use the ipod again.
-
I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?
I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?
-
Problems with the new Pages.
Hi everyone.
I wonder if i am the only one experiencing a little problem with the new Pages?
My problem is that every other time i want to correct the font lets say trying to underline or make the font fatter using the hotkeys "Command+B" or "Command+U" or "Command+I", or even changing it manually in "formats" my font gets stuck, and i have to copy-paste text from another pages-file into my old one to get et back to normal.
Anyone else tried this?
Martin.VladRO wrote:
These are the problems that I am encountering for the moment! If there will come up some new once, I will write them here!
Instead of starting a new list, go to
https://discussions.apple.com/thread/5468056?tstart=0 -
Problems with the new iPad and Joikuspot premium after iOS 6
Hi,
I'm experiencing serious problems with my new iPad after last iOS update. Usually I was connecting to the internet through Joikuspot premium on Nokia mobile phone (E6). I was able to do everything, https sites surfing, absolutely everything with no exceptions.
Now, after iOS 6 update, I can't connect to https sites, google+, sync calendar etc.
I've tried to change connection criteria on joikuspot but nothing. The fact is also that other devices as laptop or other smartphones are still working perfectly, in any case, sharing the wi-fi connection created by joikuspot.
Finally the problem is 100% due to the iPad and the new iOS.
disappointing, amateur for such a device... (iPad I mean).
Any help?
Many many thanks
VittorioHo lo stesso problema, dopo l'aggiornamento a IOS 6 l'ipad non riconosce più il mio nokia N8. Con IOS 5 andava una cannonata...
vorrei ritornare a IOS 5 -
Problem with the new server UCS C220 for set IP to CIMC
Hi
We’ve a problem with the new server UCS C220.
We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
Note. The dedicated management NIC does not link, the other two ports do make link.
What do you suggest to put an IP to CIMC and start installing our applications?
regardsYou may have noticed that there is no DVD rom on the c220. What you need to do is:
Login into the CIMC from your browser
Luanch the KVM
Insert the VMware DVD in your machines drive
On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
After the VMware OS installs press F2 to enter IP.
Browse to the VMware ip to download the Vsphere client
Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
You can now upload OVA templates or manually create virtua machine from this enviroment.
Hope this help -
I am having email problems with the new Mountain Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help
Incoming Mail (IMAP) Server - requires SSL:
imap.gmail.com
Use SSL: Yes
Port: 993
Outgoing Mail (SMTP) Server - requires TLS:
smtp.gmail.com (use authentication)
Use Authentication: Yes
Use STARTTLS: Yes (some clients call this SSL)
Port: 465 or 587
Account Name:
your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
Email Address:
your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
Password:
your Gmail password
The Quick Answer
Follow the instructions below to set up IMAP1 access in most email clients.
Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option? The next page under ADVANCED: THERE IS A BOX SSL MARKED. Then IMAP Path Prefix - I put stmp.gmail.com.. is that right? Port 993 can use this one? as 456 doesn't work and 587 said it wasn't safe. Under AUTHENTICATION I used PASSWORD. Should I have used external client cert TLS?
Please help me set this up securely. ThanksApple - Support - Mail Setup Assistant
-
Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?
when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message? -
Since the most recent Firefox update 3.6.8 my banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you give me some idea why it is doing this?
== This happened ==
Every time Firefox opened
== Right after the new Firefox updateHello Anne.
Can you please try it in a new (temporary) Firefox profile and see if the issue is still present? See [http://support.mozilla.com/en-US/kb/Managing+profiles this article] to know how to create a new Firefox profile. Please report back the results.
Maybe you are looking for
-
I apologize if this is already in the forum somewhere, I simply could not find this question being asked anywhere. We have an iMac running Lion with all of the latest updates as well as the latest version of iTunes. All of the digital movies we've
-
IPod not Charging, or Connecting to iTunes when Plugged into the Computer
I cracked the screen a few weeks ago. When I plug it into the computer, it does not charge, and it is not recognized. BUT, if I use the same USB cable, I can charge it using a wall charger.
-
Trouble with Digital Signature
Hello, I get the message "This document cannot be signed. There was an error when attempting to commit this signature. This document was not saved. The file may be a read-only, or another user may have it open. Please save the document with a di
-
Dear Experts, Consignment Process: Invoice is prepared as per price list i.e. 50% of MRP(not sale) and VAT @12.50%(on 50% MRP) on Invoice. (to create VAT liability in the state and by that only VAT GL should hit). After receving the stocks C&S Agent
-
Email Signatures Missing From Reply and Forwarded Messages
Email signatures do not work for reply and forwarded emails. Signature work normally for emails I write. I have 4 email accounts and 3 HTML signature identities. For each account I've enabled signatures for reply and forward in the Composition and Ad