Problem with a placeholder that isn't a placeholder

I submitted a book created with iBooks Author. Apple keeps ticketing me and saying that I have placeholder text in a pop-up.
The text in the pop-up is something that I typed in. It's not lorem ipsum ...
How do I get Apple to see this?

Silly questions.... do you have more than one pop up...have you scrolled top to bottom to check ?
Apple are 99.99999% right when thn report errors, so its odds on that somewhere you will find the text mentioned.
There are times I have pasted into a pip over box thinking I had selected the placesholder text so it would be over written...only to find it still there with my content.
Suggestion: Also check you have not added a shape and accidentally typed into it - ditto - text box.
How do I get Apple to see this?
I had this situation and in the end askked the review team to identify the page - which the did and it turned out to be an "empty" text box under a photo image.

Similar Messages

I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing

I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing........

This is the iPod touch forum. I will request that you post be moved to the iPod Classic forum.

I have problems with my films that become slightly jerky after I have imported and edited them in iMovie and then burned them onto a DVD using iDVD. I can see the weak jerkiness when panning in both laterally and vertically. I shoot with a camcorder Canon

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware software worked more than 3 times did not fix

dears,
I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware I do resoftware more than 3 times did not fix.
Network also always missing.
I am living in KS Wichita. I hope you help me pleas.
Regards.

iPhone warranty is not international. You will have to return your
iPhone to Saudi Arabia for repair/replacement. Either take it back
yourself or send to friend/relative for them to take to Apple. Apple
will not accept international shipments for repair nor will Apple
ship repaired/replaced iPhones out of the country where the repair
was done.

I have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

i have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

I have a problem with disk utility that is not on my mac pro

I have a problem with disk utility that is not on my mac pro

Open your Applications folder then open the Utilities folder. It should be there.
If not, click the magnifying glass icon top right corner of your screen. That's Spotlight.
Type: Disk Utility
Hopefully it will show up.
Mac Basics: Spotlight

I am having problems with certain websites that require adobe flash player because of the restrictions that apple has put in place. Is there a way to get to sites that require flash player?

I am having problems with certain websits that require adobe flash player

Please don't start the 1 millionth thread on this subject, which has been answered over and over and over and over and over and over and over.........Use the search bar and type flash and you'll see thousands of posts on this.

Problems with the summit that auto generate t:panelTab

Hi,
I have a problem with the summit that auto generate <t:panelTab. When I submit with this button the bean PortfolioPageBean doesn�t recover the property contractListItem. However when I submit with <h:commandButton commandButton action="add", the bean recover information. What is the difference between these two types of submits?. This is my core:
<h:form id="menuTag">
<h:inputHidden id="contractListItem"
               value="#{PortfolioPageBean.contractListItem}" />
<h:commandButton action="add" id="buttonTab" value="Add" />
          <t:panelTabbedPane styleClass="tabbedPane"
               activeTabStyleClass="activeTab" inactiveTabStyleClass="inactiveTab"
               disabledTabStyleClass="disabledTab" activeSubStyleClass="activeSub"
               inactiveSubStyleClass="inactiveSub" tabContentStyleClass="tabContent"
               serverSideTabSwitch="true" id="menuTabs">
               <t:panelTab id="tab1" styleClass="" label="Contract Listing">
                    <f:verbatim>
                         <br>
                    </f:verbatim>
                    <f:subview id="subtab1">
                         <jsp:include page="contract-list.jsp" />
                    </f:subview>
               </t:panelTab>
               <t:panelTab id="tab2" label="General Policy Details" style="align:center">
                    <h:outputText
                         value="#{PortfolioPageBean.contractListItem}"></h:outputText>
                    <f:verbatim>
                         <br><br><br>
                    </f:verbatim>
                    <f:subview id="subtab2">
                         <jsp:include page="general-policy.jsp" />
                    </f:subview>
               </t:panelTab>
          </t:panelTabbedPane>
</h:form>
Thank for your time!!!

Hi,
I have a problem with the summit that auto generate <t:panelTab. When I submit with this button the bean PortfolioPageBean doesn�t recover the property contractListItem. However when I submit with <h:commandButton commandButton action="add", the bean recover information. What is the difference between these two types of submits?. This is my core:
<h:form id="menuTag">
<h:inputHidden id="contractListItem"
               value="#{PortfolioPageBean.contractListItem}" />
<h:commandButton action="add" id="buttonTab" value="Add" />
          <t:panelTabbedPane styleClass="tabbedPane"
               activeTabStyleClass="activeTab" inactiveTabStyleClass="inactiveTab"
               disabledTabStyleClass="disabledTab" activeSubStyleClass="activeSub"
               inactiveSubStyleClass="inactiveSub" tabContentStyleClass="tabContent"
               serverSideTabSwitch="true" id="menuTabs">
               <t:panelTab id="tab1" styleClass="" label="Contract Listing">
                    <f:verbatim>
                         <br>
                    </f:verbatim>
                    <f:subview id="subtab1">
                         <jsp:include page="contract-list.jsp" />
                    </f:subview>
               </t:panelTab>
               <t:panelTab id="tab2" label="General Policy Details" style="align:center">
                    <h:outputText
                         value="#{PortfolioPageBean.contractListItem}"></h:outputText>
                    <f:verbatim>
                         <br><br><br>
                    </f:verbatim>
                    <f:subview id="subtab2">
                         <jsp:include page="general-policy.jsp" />
                    </f:subview>
               </t:panelTab>
          </t:panelTabbedPane>
</h:form>
Thank for your time!!!

HT4889 After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?

After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?
13-07-03 6:24:12.447 PM com.apple.launchd.peruser.502[1632]: ([0x0-0x5be5be].com.jetbrains.intellij[5805]) Job failed to exec(3) for weird reason: 13

What is the exact name of the application you're trying to launch? Is it in the Applications folder?

Problem with JavaScript snipet that DreamWeaver is writing

I am having a problem with code that DreamWeaver (CS3) is
writing. I'm fairly certain the problem is in a small piece of
JavaScript that DreamWeaver is composing.
This is a fairly complex problem, so bear with me.
First - What I am trying to make happen: When on a page on my
site (the-oilman.com) I want a link that opens a new window in the
on-line store at a different site (AMSOIL.com). I need to leave
both the page on my site open and have this 'store' page open.
First of all this is working fine, using the 'Open Window'
'behavior' in DreamWeaver. If someone wants to change windows (or
tabs) and go back to my page, leaving the 'store' window open also
- the problem is set up to happen. If from back at my site, you
click on the same or a different link that goes back to the 'store'
either on the same page or a different page at AMSOIL.com - the
'store' window goes to the correct page, but the 'store' window
does NOT come on top. When they click on a link to go back to the
'store' I need the 'store' window to come to the top. If they have
previously put something in the cart, and come back and add
something else to the cart in the 'store' by coming in from
different links on my site the 'store' is working correctly because
I leave it open the whole time.
snipets of code that DreamWeaver is writing for my site
(the-oilman.com):
from the head:
<script>

</script>
code from 2 different links that is using this script:
<a href="
http://www.amsoil.com/redirect.cgi?zo=52257&page=storefront/sso"
target="store" onClick="MM_openBrWindow('#','store','')"
csclick="10D39F40">Buy Now</a>
<a href="
http://www.amsoil.com/redirect.cgi?zo=52257&page=store"
title="AMSOIL Store at AMSOIL.com" target="store"
onClick="MM_openBrWindow('http:www.amsoil.com/redirect.cgi?zo=52257&page=store','stor e','')">On
Line Store</a>
I believe what I need is a longer javascript. Instead of just
"window.open" I need an "if" but my javascript knowledge is very,
very limited.
I need it to first check that if the window named 'store' is
open then 'focus' it, or if it is not open to open the window named
'store'.
Will this fix my problem? If so, please help me write the
lines of code to do it.
If this isn't the solution, what is the problem and the
solution?
A separate question but related: if you look in the two
different links codes, in the function call one of them uses a
'null' page reference and the other repeats the full link reference
from the href= . Both seem to work, but which is the correct or the
preferred syntax. My guess is there are some browsers that this
will give a problem, but which way is preferred.
Don Dawson
mailto:[email protected]

Create a new page. Try to apply this same behavior to a link
on that new
page. Look at the code. Can you reproduce the problem there?
The code you
show below has oodles of GL stuff in it. Do you need that GL
markup?
What operational sequence did you go through to get this
behavior call?
onClick="MM_openBrWindow('#','store','')"
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"pad graphics" <[email protected]> wrote in
message
news:[email protected]...
>I am having a problem with code that DreamWeaver (CS3) is
writing. I'm
>fairly
> certain the problem is in a small piece of JavaScript
that DreamWeaver is
> composing.
>
> This is a fairly complex problem, so bear with me.
>
> First - What I am trying to make happen: When on a page
on my site
> (the-oilman.com) I want a link that opens a new window
in the on-line
> store at
> a different site (AMSOIL.com). I need to leave both the
page on my site
> open
> and have this 'store' page open. First of all this is
working fine, using
> the
> 'Open Window' 'behavior' in DreamWeaver. If someone
wants to change
> windows (or
> tabs) and go back to my page, leaving the 'store' window
open also - the
> problem is set up to happen. If from back at my site,
you click on the
> same or
> a different link that goes back to the 'store' either on
the same page or
> a
> different page at AMSOIL.com - the 'store' window goes
to the correct
> page, but
> the 'store' window does NOT come on top. When they click
on a link to go
> back
> to the 'store' I need the 'store' window to come to the
top. If they have
> previously put something in the cart, and come back and
add something else
> to
> the cart in the 'store' by coming in from different
links on my site the
> 'store' is working correctly because I leave it open the
whole time.
>
> snipets of code that DreamWeaver is writing for my site
(the-oilman.com):
> from the head:
> <script>
> 
> </script>
>
> code from 2 different links that is using this script:
> <a href="
http://www.amsoil.com/redirect.cgi?zo=52257&page=storefront/sso"
> target="store" onClick="MM_openBrWindow('#','store','')"
> csclick="10D39F40">Buy
> Now</a>
> <a href="
http://www.amsoil.com/redirect.cgi?zo=52257&page=store"
> title="AMSOIL
> Store at AMSOIL.com" target="store"
>
onClick="MM_openBrWindow('http:www.amsoil.com/redirect.cgi?zo=52257&page=sto
> re','store','')">On Line Store</a>
>
> I believe what I need is a longer javascript. Instead of
just
> "window.open" I
> need an "if" but my javascript knowledge is very, very
limited.
> I need it to first check that if the window named
'store' is open then
> 'focus'
> it, or if it is not open to open the window named
'store'.
> Will this fix my problem? If so, please help me write
the lines of code to
> do
> it.
> If this isn't the solution, what is the problem and the
solution?
>
> A separate question but related: if you look in the two
different links
> codes,
> in the function call one of them uses a 'null' page
reference and the
> other
> repeats the full link reference from the href= . Both
seem to work, but
> which
> is the correct or the preferred syntax. My guess is
there are some
> browsers
> that this will give a problem, but which way is
preferred.
>
> Don Dawson
> mailto:[email protected]
>

I have a problem with Adobe Reader that the page dissapears after 30 seconds or so

I am having a problem with one of the Companies that sell PC parts as their Parts list is in PDF format, when I click on their page Adobe Reader opens up after 30 seconds or so the screen goes blank, and I cannot read the PDF.
I have Re loaded the Adobe, and I am running Firefox vr 5.
Below is the Website I am looking at.
Many Thanks
Peter Harding
http://www.msy.com.au/Parts/PARTS.pdf

You need to buy the plug-ins you are using. This is a demo mode spoiler from some third-party plug-in.
Mylenium

Problem with web service that returns an object with a String that have som

Hi everybody:
I have a problem with a web service I am doing, I have made a web service that returns a collection of objects, the objects have a set of properties, there is one property that is a String,this property consists in a text fragment that could have some characters that are considered special in XML like &, <, >, " and that's why when I execute the service from a client an exception is thrown:
{code}
Exception in thread "main" org.codehaus.xfire.XFireRuntimeException: Could not invoke service.. Nested exception is org.codehaus.xfire.fault.XFireFault: Could not read XML stream.. Nested exception is com.ctc.wstx.exc.WstxParsingException: Expected a text token, got START_ELEMENT.
at [row,col {unknown-source}]: [9,646]
org.codehaus.xfire.fault.XFireFault: Could not read XML stream.. Nested exception is com.ctc.wstx.exc.WstxParsingException: Expected a text token, got START_ELEMENT.
at [row,col {unknown-source}]: [9,646]
at org.codehaus.xfire.fault.XFireFault.createFault(XFireFault.java:89)
at org.codehaus.xfire.client.Client.onReceive(Client.java:410)
at org.codehaus.xfire.transport.http.HttpChannel.sendViaClient(HttpChannel.java:139)
at org.codehaus.xfire.transport.http.HttpChannel.send(HttpChannel.java:48)
at org.codehaus.xfire.handler.OutMessageSender.invoke(OutMessageSender.java:26)
at org.codehaus.xfire.handler.HandlerPipeline.invoke(HandlerPipeline.java:131)
at org.codehaus.xfire.client.Invocation.invoke(Invocation.java:79)
at org.codehaus.xfire.client.Invocation.invoke(Invocation.java:114)
at org.codehaus.xfire.client.Client.invoke(Client.java:336)
at org.codehaus.xfire.client.XFireProxy.handleRequest(XFireProxy.java:77)
at org.codehaus.xfire.client.XFireProxy.invoke(XFireProxy.java:57)
at $Proxy0.search(Unknown Source)
at cu.co.cenatav.webservices.client.Client.main(Client.java:26)
{code}
I know that this is happening because special characters are sent by the soap message but I don't know how to solve this problem.
How could I avoid this exception ?
I hope you can help me.
Regards.
Ariel

Hi,
BPEL and BPEL PM do not have a good support for SOAPENC-Array: it would be very difficult to create such an array in BPEL or to receive it and manipulate it.
The (unfortunately very intrusive) work around is to change the WSDL of the service to use a XML type defined using XML schema. This is all the more painful that JDev 9.0.4 does not have strong support for complex types.
In general though, I would highly recommend this best practice:
1) Start by define the WSDL contract first
2) Then generate the server side skeleton to implement it
3) Use BPEL as the client to this contract.
By starting with the contract first, you make sure that 1) your interfaces are clean and coarse grained.
2) things like java objects, sessions, etc to not leak through the interface (which would be the worst thing that could happen because it would closely link the client and the server.
Sorry for not being more helpful. This will get radically cleaner in Oracle AS 10.1.3.
Edwin

Problems with a thread that records dvd on suse linux

PLEASE HELP
I am using SuSE linux, and I record dvd+/- RW with the program growisofs.
By command line on the linux shell, growisofs records normally, but when I try to use the same line cone that I use in the shell in a java thread, it never stops recording, I mean, it records all data, but it apparently does not close the dvd session, for the grenn light on the drive never stops blinking, and I have to stop the proccess manually, because it never releases the dvd drive.
I use the thread in a large program, but for debugging this I have made a simple program, whose error is the same.
the code is:
        String s = "/usr/local/bin/growisofs -speed=1 -M /dev/dvdram -V MIS27 -A growisofs -P MedImServer " +
           " -p MedImServer -sysid Linux -J -R -l -relaxed-filenames -allow-lowercase -allow-multidot /windows/C/online";
       Process p;
            try {
                p = Runtime.getRuntime().exec(s);
                p.waitFor();
            catch (IOException ex) {
                JOptionPane.showMessageDialog(null,"erro no runtime");
                System.exit(0);
            catch (InterruptedException ex1) {
                JOptionPane.showMessageDialog(null,"erro no waitfor");
                System.exit(0);
            }with JBuilder 9 debug, I realized that it freezes at the moment of "p.waitFor()".
I thought that it was a problem with the recording software, but it is not: the same command line that I use in the program I have used in the Linux shell and it recorded perfectly. The program does not require any user interaction but the command line I wrote before. The problem with the Java program is that it records all data, but never returns from the process. It's not a problem with the software, for it records perfectly when it's not called within the Java program, so I imagine that it is some funny thing in either the Runtime.getRuntime().exec(...) or the p.wait().
Better yet:
Is there a way to record dvds with a java command instead with an exteranal program?
This would be the heaven...
IF it is possible, do it require some sun package?
Thans
Tiago

Did you mean like this?
        Process p = null;
        String s = null;
        File f;
        try {
            f = new File(pathtmp);
            f.mkdir();
            if(VERBOSE) Log.info(GRAVA_LOG_MARK + "Pasta " + f.getPath() + " criada");
            for (Iterator iter = estudos.iterator(); iter.hasNext(); ) {
                HashMap item = (HashMap) iter.next();
                String id = (String) item.get("id_paciente");
                String dt_hr = (String) item.get("dt_hr_estudo");
                String estudo = id + "." + dt_hr;
                File dir = new File(distriOff.path);
                String[] arquivos = dir.list(new FiltroInicio(estudo));
                for (int i = 0; i < arquivos.length; i++) {
                    File src = new File(distriOff.path + arquivos);
File dest = new File(pathtmp + arquivos[i]);
try {
Util.copy(src, dest);
catch (Throwable ex) {
Log.error(mensagem + " " + ex);
prop.enviaMsg(mensagem + " " + ex);
throw new ExcecaoDistribuicao(ExcecaoDistribuicao.ERRO, mensagem + " " + ex);
String os = System.getProperty("os.name");
String modo;
if(midia.getEspaco_disponivel_midia() == midia.getTamanho_midia()) {
//primeira gravagco
modo = "-Z";
else {
//gravagco de novas segues
modo = "-M";
String speed = "-speed=1";
String cmd = "/usr/local/bin/growisofs " + speed + " " + modo + " " + dvdDevice + " "
+" -V " + prop.getIdMidiaAtual() + " -A growisofs -P MedImServer "
+"-p MedImServer -sysid " + os + " -J -R -l -relaxed-filenames -allow-lowercase -allow-multidot " + pathtmp;
p = Runtime.getRuntime().exec(cmd);
p.waitFor();
catch (IOException ex){
Log.error(mensagem + " " + ex);
prop.enviaMsg(mensagem + " " + ex);
throw new ExcecaoDistribuicao(ExcecaoDistribuicao.ERRO, mensagem + " " + ex);
catch (InterruptedException ex) {
Log.error(mensagem + " " + ex);
prop.enviaMsg(mensagem + " " + ex);
throw new ExcecaoDistribuicao(ExcecaoDistribuicao.ERRO, mensagem + " " + ex);
try
BufferedReader stdInput = new BufferedReader(new InputStreamReader(p.getInputStream()));
// Lj saida padrco do comando
while ( (s = stdInput.readLine()) != null)
Log.info(GRAVA_LOG_MARK + s);
catch (IOException ex)
Log.error(mensagem + " " + ex);
prop.enviaMsg(mensagem + " " + ex);
throw new ExcecaoDistribuicao(ExcecaoDistribuicao.ERRO, mensagem + " " + ex);
try
BufferedReader stdErr = new BufferedReader(new InputStreamReader(p.getErrorStream()));
// Lj qualquer erro do comando
while ( (s = stdErr.readLine()) != null) {
Log.info("Processo de Gravagco: " + s);
if((s.indexOf("failed") != -1) || (s.indexOf("error") != -1) || (s.indexOf("unable") != -1)) {
Log.error(mensagem + " " + s);
prop.enviaMsg(mensagem + " " + s);
throw new ExcecaoDistribuicao(ExcecaoDistribuicao.ERRO, mensagem + " " + s);
catch (IOException ex)
Log.error(mensagem + " " + ex);
prop.enviaMsg(mensagem + " " + ex);
throw new ExcecaoDistribuicao(ExcecaoDistribuicao.ERRO, mensagem + " " + ex);
I tried to execute it, and it indeed doesn't freeze, but it doesn't record a thing either...
now it doesn't even wait for the thread, which is VERY weird: it does not record a thing!!! It just passes by the line 'p.waitFor()'...
Any sugestion?
By the way, thanks for helping me...
Tiago

Problem with the invitations that my ical sends

When recipients to my ical invitation receive their email, they are unable to add the invite to their calendar apps and the attachment doesn't work. Sometimes when they try to open the attachment, it even crashes their outlook.
I sent an invite to myself to test and I got this in the body of the email:
BEGIN:VCALENDAR
PRODID:-//Apple Computer\, Inc//iCal 2.0//EN
METHOD:REQUEST
CALSCALE:GREGORIAN
VERSION:2.0
BEGIN:VTIMEZONE
TZID:US/Pacific
LAST-MODIFIED:20061208T193857Z
BEGIN:STANDARD
DTSTART:20061029T090000
TZOFFSETTO:-0800
TZOFFSETFROM:+0000
TZNAME:PST
END:STANDARD
BEGIN:DAYLIGHT
DTSTART:20070311T010000
TZOFFSETTO:-0700
TZOFFSETFROM:-0800
TZNAME:PDT
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
DURATION:PT1H
ATTENDEE;PARTSTAT=NEEDS-ACTION:mailto:[email protected]
ATTENDEE;CN="Jamie
Hurlbut";PARTSTAT=NEEDS-ACTION:mailto:James.Hurlbut@m
ccannsf.com
ATTENDEE;CN="test":mailto:[email protected]
DTSTAMP:20061208T193851Z
LOCATION:dfgfdg
UID:3A9DEB59-F4AE-4794-A7D6-C15CD6A1CADD
SEQUENCE:14
DTSTART;TZID=US/Pacific:20061213T120000
SUMMARY:test 2
DESCRIPTION:tell me if you can add this to your cal
ORGANIZER;CN="Jennifer Lau":mailto:[email protected]
END:VEVENT
END:VCALENDAR
Along with an attachment that didn't work.
Any help would be greatly appreciated!
Jennifer
MacBook Pro Mac OS X (10.4.8)
MacBook Pro Mac OS X (10.4.8)

I would like to chime in on this issue, becaue at my company, we are having the same problem. Here is more detail:
I work for a small analytical consulting firm in Northern Virginia. We have about 80 employees, and we are a dual-platform company. Two of our three managing partners are huge Mac fans, and our head IT guy is also a die-hard Mac user, so the company goes out of its way to support Mac users. Employees are offered a choice as to whether or not they want to use a Mac or a PC when they start work here. We have about 20 Mac users, and it seems like the percentage of Mac employees has been growing over the past year.
Almost all of us who use Macs use Mail instead of Entourage. We do not operate an Exchange server (too expensive), so instead our e-mail system is an IMAP server. This arrangement works great most of the time -- most of the Mac users use Mail, the Windows users all use Outlook. One annoying problem we frequently run into, however, is meeting invitations. If a Windows user schedules a meeting from their Outlook, and sends out the meeting invitation via e-mail, everyone can get it no problem - Mac and Windows users.
However, if a Mac user tries to schedule a meeting in their copy of iCal, and send out the meeting invitation vial e-mail, Mac users can get it just fine, but the Windows users just get an e-mail with a .ics file attached that they cannot open. Interestingly enough, if the same Mac user sends the invitations out from within Entourage, the Windows users can open it just fine. This sets up the ridiculous situation whereby we Mac users are forced to use Entourage whenever we want to set up a meeting, then go back to Mail/iCal. Its crazy and frustrating to have to go back and forth between two separate e-mail programs. We also use a program called XC Connect to share calendars and task lists, and it is dog slow with Entourage, so that is why most of us prefer to stay away from it.
From what I can gather, the problem stems from the fact that Microsoft did not implement the official iCal file standard correctly. I'm sure Apple's position is "Why should we deviate from the accepted standard just to play nicely with Outlook? The problem is on there end -- let them fix it." I can understand that position, but it really doesn't help us folks in the real world who are banging our heads against this problem every day.
This seems like an ideal problem for some enterprising shareware developer to solve. I've heard that it may be possible to write an AppleScript that would automatically re-format the .ics invitation before sending it out to make it compatible, but have not been able to find any such AppleScript on the web. However, the best solution would probably be an actual plug-in for the Mail program to build the functionality into Mail itself.
Surely there is a solution to this problem that does not involve switching to Entourage?
Can any one help?

Session problem with a form that calls psp web page.

Hi,
My unique form is based on table A.
Within the form I call a stored procedure, which insert data from A into tables B,C,D
And then within the same form I call a psp procedure using web.show_document('http://server:8080/plsql/psp_procedure?pvId=1001);
The plsql web page displays data from tables B,C,D for each single pvId.
The problem is:
If any commit is issued the psp web page contains no data from B,C,D.
I suppose I'm working with two different sessions, can I work within the same one?
Thanks

Hi,
I'd say the main problem is that you have both rows with the same name 'Rangée1'. This is not a good idea, especially as the first row is the repeatable row.
When objects have the same name, you can see the instances in the hierarchy, eg 'Rangée1[0]' and 'Rangée1[1]'. The instances use a zreo-based numbering system.
By the way you can also see it in the Object > Binding tab:
So that is when you have multiple objects with the same name.
The problem with your form is that when objects are repeated (add new instance button), then these new objects also have instances, eg 'Rangée1[0]', 'Rangée1[1]', 'Rangée1[2]', etc.
So the Acrobat gets confused ;-)
I have renamed the second row 'Rangée2'. That seems to have solved the problem.
Here is the form back to you: https://acrobat.com/#d=jcCs7X85xeRYQjvI2Yb*Cw
Good luck,
Niall

Problem with a placeholder that isn't a placeholder

Similar Messages

Maybe you are looking for