Problem with A300 inspire

Hi.
I boughy A300 inspire today and installed everything and my speakers dont working. There are working only in Realtek HD Audio Menager.Can someone help me, please?

Satellite Pro A300-1GQ
This was the only place i found in all your sites at "Contact us" menu. If I'm in mistake please redirect me to the right e-mail or topic.
These forums are for United States computers. For that European machine, you probably want to post elsewhere.
Toshiba Support Forums Europe
You need to obtain a recovery disc that restores the hard drive to factory-new.
-Jerry

Similar Messages

Problem with A300, Ask for help

Hello from Bulgaria!
In the beginning I want to apologize if I bother you at the wrong place. This was the only place i found in all your sites at "Contact us" menu. If I'm in mistake please redirect me to the right e-mail or topic.
I have extremely big problem with one of your products, and I'm afraid I can't solve him without your help. Few months ago I bought a laptop witch exact model is TOSHIBA SATTELITE PRO A300 - 1GQ. Model No.: PSAG1E - 00900NF3, Serial No.: 88549776Q. If you need another information I can tell you everything. Badly i got serious virus and the situation reach fall windows start. I know about integrated Toshiba Recovery and I used it. Windows Vista was successfully installed but the partion was not formated. Some of the system files was still corrupted and I resorted to Toshiba DVD comming with the laptop. I ran it, there was no problems until I saw Windows XP logo. I was pretty surprised because I expected Windows Vista like original one which came with the laptop from the shop. Another problem was that that installation formated whole HDD including partitions different from C:\ with Windows system files. All of my data is gone without I could be able to do something. However, th
e question is that I need Windows Vista very badly and I dont want XP. I tried to use hidden partition with Toshiba recovery again but I cant no longer access it. So I left with original XP with drivers integrated with it. The problem is that I need Vista with integrated drivers. It wouldn't be hard also if I found that drivers in your sites. Nowhere in your sites with download I could find the exact model to take it. The nearest was A210 which I think is pretty far from mine.
And it the end I ask for help if you can tell me where to download the needed drivers or anyway to put Vista back. Preliminary I thank you and I apologize again for the disturbing. I need that information badly and I don't know where I can get it from. At least show me valid e-mail to contact with Toshiba Support.

Satellite Pro A300-1GQ
This was the only place i found in all your sites at "Contact us" menu. If I'm in mistake please redirect me to the right e-mail or topic.
These forums are for United States computers. For that European machine, you probably want to post elsewhere.
Toshiba Support Forums Europe
You need to obtain a recovery disc that restores the hard drive to factory-new.
-Jerry

Problem with my Inspire T6100

When Im listening music or watching movies sound of my system RISE or go LOWER alone. Please someone tell me is that a hardware problem or what. Im warried about my system!
I have seen another people with this strange problem, and no answer. Pls, help with this.

I check every inch of this cable and others. It's look good to me. Is that any chance the problem is in the cable and it cant be seen, because on the surface of the cables there's nothing.
Mmm, is there a chance to have a problem with someone of the jacks of the sound card ?

Weird problem with A300 and external drive

Info about my comp: A300-29U model Windows 7 ATI Edition (32) SATA Unknown External Drive ----- Ok, so yesterday I plugged in my external drive as usual to check some music. Everything was ok and I went to sleep. This morning when I woke up and tried that again the computer doesn't see external drive. You hear that sound when you turn it on/off, but it doesn't show or even do auto-run of my external drive. I changed 3 new USB cables and plugged in into 3 differen USB Hubs and everything is the same... I checked in Device Manager, it says that device is working fine, but I have 2 Base Missing Driver errors. I suppose that's for this external drive, but I don't have a clue how to fix it. I downloaded new chipset/bios drivers and have a fresh Avira installed. Any tips?

If you have a two devices banged out, deleted them and restart. It should auto detect the devices and load the driver. I had a problem like this. That worked for me.
What kind of hard drive is it.

I have a problem with the inspire t7900

hello all, i have the 7.1 speaker system, its greate, but i have one problem i am connecting it to a mp3 player, but the problem is that the sound volume change alone..!! i mean i leave the volume control after i settle it on a volume then the volume gets up and down alone without touching the remote its strange and they r less that month old !! plz if any one can help me i would be thankfull

I have a problem like this too. But my speakers system is the itrigue 3200. The model with the cheapest remote. The remote broke 2 or 3 weeks after I got the speakers system (but not from dell). The remote still work but baldy and the volume go up and down randomly and now I want to buy the wireless remote I200 but I live in Canada and Creative don't seem to consider that they have consumers in Canada. They don't ship in Canada.

Problem with 6.1 6700 [I think volume control unit]

Hi, I've a volume problem with my Inspire 6.1 6700. The volume sometime turn to be loud or weak automatically. I think that the problem depends from the volume control unit. How i can resolve this problem? I tried to find another volume control unit, but I findn' it...
Can you help me?
Thanks.

kenz wrote:
Hi,
I've a volume problem with my Inspire 6.1 6700. The volume sometime turn to be loud or weak automatically. I think that the problem depends from the volume control unit. How i can resolve this problem? I tried to find another volume control unit, but I findn' it... Can you help me? Thanks.
I have the same product (from 3 years)... and I had the same problem!... it's the faulty volume control! I changed it 2 times... the first replaced was broken ,5 years ago... the second (different from the original) 6 month ago... :smileysurprised:

7700 speaker problems with control Pod

ok if anyone has speakers like this they know it comes with a little control pd that controls the volume and bass. well i think the problem is that sometimes the volume goes really high or really soft. and if you turn the volume up or down, the sound will go back to normal and you will be blasted or can't hear it. its very anoying to listen to music or game and this happens. it does this regardless of the number of speakers attached, and my drivers are up todate. i have onboard sound on a asus A8V mobo so its a newer board. some people said that the pod can get wonky, and i am checking to see if anyone has any suggestions on what i should maybe try short of RMA the speakers, its not that i don't want to RMA it but i would have to pay shipping on a set of speakers witch is kinda gay. any help would be great.. thanks

fox_9 wrote:
ok if anyone has speakers like this they know it comes with a little control pd that controls the volume and bass. well i think the problem is that sometimes the volume goes really high or really soft. and if you turn the volume up or down, the sound will go back to normal and you will be blasted or can't hear it. its very anoying to listen to music or game and this happens. it does this regardless of the number of speakers attached, and my drivers are up todate. i have onboard sound on a asus A8V mobo so its a newer board. some people said that the pod can get wonky, and i am checking to see if anyone has any suggestions on what i should maybe try short of RMA the speakers, its not that i don't want to RMA it but i would have to pay shipping on a set of speakers witch is kinda gay. any help would be great.. thanks
I have the same problem with my inspire 6.'s volume pod, after well under a year of flawless perfomance, the volume lowers randomly especially when I adjust the pod's volmue or just touch or move it. If I try to simply adjust for the loss of volume by cranking it up, it likes to blast me outta nowhere when it decides to work again. The only thing I can do to shortcut the 'down time' while waiting for it to adjust to normal level is to tap on the pod repeatedly usually causing the volume to adjust quicker...but I'm sure thats not the right method for fixing this irritating problem...PLEASE wont someone HELP ME?! Feel free to e-mail me @ [email protected], thanx!
Message Edited by BigLovan on 10-28-2004 01:16 AM

Having Problem With Inspire 5.1 5300 rear speaker...

After using my inspire 5.1 5300 for few year... right now im having problem with my rear speaker... just one channel was unable to start... Anyone know about repairing for speaker ? I Have try to switch to other channel it seem that just that rear speaker was unable to start... all should be ok... week before i still hearing sound from that rear speaker... but now it was unable to start. Anyone Have Any Idea Please Tell Me. Thank You

Just to clarify, by "FCP 5 friendly source material," he means video files that are a format (codec) that FCP 5 supports. What FCP 5 supports can be found in the EASY SETUP list. If the format you are working with isn't there, say if your footage is H.264 or MP4 or some other web compressed format, FCP won't work properly. It needs to be in an editing codec if you want FCP 5 to work with it.
Also, you need to make sure that your sequence settings match the settings of the footage you are trying to edit. If you add a clip to the sequence, and immediately have to render, that's a big clue to say that something isn't right. You should edit without rendering at all.
The most important thing you need to do is properly set up your project from the start, and the best way to do this is to choose a setting from the Easy Setups, located under the Final Cut Pro menu. Once you do this, you’ll need to create a new sequence. This is because the sequence that is already in your new project is setup for the typical default setting of DV/NTSC, or for the settings of your last project, which might not match what you are currently working with. So delete SEQUENCE 1 and create a new sequence:
This new sequence will contain the settings you chose in the Easy Setup menu, and should match the format you captured

Satellite A300-202 - problems with the AC power

Hi,
I bought a Satellite A300-202 a couple of months ago and I'm having intermittent problems with the AC power.
Sometimes I plug the AC power and it won't start charging (the indicator leds are off and windows says it is on battery). Other times it is charging and suddenly stops.
I suspected it could be the cord broken in the inside but it seems to also happen when no one touches it. Usually, when it stops charging, I unplug it from the wall, wait a few seconds and plug it back in, and it starts charging fine never stopping again.
Anyone got a similar problem? I wonder if is there any way to just replace the AC power parts so I won't have to send the whole laptop for reparing.
Thanks
Pedro

Hi
I never had a problem with my Toshiba chargers but one old non-Toshiba AC adaptor died after 6 month of usage. After the replacement it works without any problems.
I think you should check the BIOS update as mentioned by Akuma but for me it sounds more like a AC adaptor issue.
So if the BIOS update doesnt help, the AC adaptor should be checked definitely.

Problems with X-Fi Fatal1ty Plat & Inspire P7800

Hi there, I recieved my X-Fi Fatalty Platinum Champion and the P7800 Inspire 7.1 speakers today. From the speakers I get. Front Left, Front Right, Center, Rear Right and Subwoofer alright, but no sound at all from either Side or Rear Left. I checked the speakers themselves on the working speaker outputs and all seems good. I'm also getting a signal from each of the Line-Out ports of the S/C. I'm using Win XP Pro with SP2?
Message Edited by GrinningDragon on 10-22-2007 11:29 PM

I've solved the problem. The connector cable that came with the Inspire speakers had a kink in the Black and Grey leads. (Amplifier input).Resplicing, soldering and taping the wires have enabled lovely 7.1 surround immersion. Had me worried that I was going to have to test the return policy of the vendor there.

Problem with inspire 280 speakers

well i own creative inspire 280 speakers but im having trouble with them. First when i connect it to some devices background electric noise appears when im not playing anything, then if I connect the jack till the end, the played sound will only be mono, the only way to play it stereo is if i dont put the 3,5mm jack till the end but it still shows some background noise. How can i solve this issue?

i have a similar problem with my 280 speakers.

Problems with sound regulator in Satellite A300

Hello everyone!
I have weird problem with my sound regulator in A300. When I use "wheel" in front of laptop, next to headphones input etc., sound turns up and down very irregulary- I try to turn up the sound and it twitches around constant level of volume ending at 10% of desired level. I tried to reinstall sound drivers but it didn't work and all in all I have no idea if there are any other things I can do to fix this.
Can anyone help me? Thanks.

I had the same issue with my Satellite U400.
The volume wheel controller was dirty in my case.
I used an compressed air spray and could remove the dust between the sensors.
This helped a little bit.
Now the volume level does not jump too much while increasing or decreasing the volume level.

Problem with inspire 5100 digital decoder

I have some problem with the decoder included with the Inspire 500 digital. I usually have it connected by soundblaster's audigy digital out to decoder's coaxial digital in (SPDIF). and recently sound has dissaperas replaced by a chipping and cropping low noise. Have you any ideas about it's. When I connect the soundblaser's speakers out to decoder's line in works only for stereo (losing 5.1 capabilities), and bypassing the decoder i can get 5.1 sound, but i can't use the included remote control to change volume or anything.
Thank you.
I'm sorry for my poor english, it's not my native lenguage.

I'm not sure exactly how you're connecting things. You say you connected an optic out to a digital DIN on the receiver? These are totally different connectors.
The output on the card itself isn't optical. What you could use is a minijack to RCA (female) adapter, and then connect a standard RCA to RCA, male to male (SPDIF) cable to that, which plugs into the coaxial input on the receiver. Alternati'vely you could use a minijack to Digital DIN adapter and connect the DIN cable to that, and connect to the receiver.
Do you have the SBLi've 24-bit External? Do you mean you connected the optical output to the optical input on the receiver?
It may be best to contact Customer Support to speak to them one-on-one, to go over the connections and settings, if you're unsure of which to use.
Cat

Problems with Satellite A300-1GC XP install - CD not working?

Hi there
I have few looks round in various forums and did not find any answer at all.
I have the A300-1GC Satellite and had (since last night) vista on it. As Vista caused
an awful lot of problems with various programs I decided to get rid of it.
The problem now is - if I stick my XP installation CD it it reads "press any key to start from CD".
Done that and then nothing happens. The CD reading head keeps on moving backwards and forwards
but nothing happens at all. Not even the start of the blue installation screen.
Any ideas where that comes from?
Might the CD-rom also be running in AHCI mode (can a CD drive do that?) and requires drivers?
I tried various XP CDs - neither works. The latest one I had was with SP3 and build in Feb 2009 so fairly recent.
Any clues?
Cheers
Tobimaster

Hi
In your case the issue has nothing to do with SATA mode (AHCI or Compatible mode) but it look like the CD/DVD drive cannot handle the inserted Win XP disk
Why? Who knows
Fact is that the CD cannot be read and therefore the installation cannot get on.
Try to copy this disk using another computer and then you could try to use the copied disk on order to install the Win XP.
Just for info: I'm using TDK -R disks (CD and DVD)... I'm very satisfied

Problem with inspire t7900

Hi,i just bought inspire t7900 speakers and i have a big problem..
there is no sound! actually i have tried everything..there is no connection problem,i also bought
the creative sound blaster audigy which is recomended for this kind of speakers,i have checked anything about settings but nothing...i also have tried different operating systems(xp home sp2,xp proffesional sp2) but the problem remains..
if you need additional information, my pc is new very good system(intel core quad proccessor,motherboard asus p5kc) so i can't find out where is the problem!
can anyone help me plz?

Hi, I have the same problem. Actually, it was working for a while, then all of a sudden: no sound from any of the speakers! Plugging headphones into the remote works, so there doesn't seem to be a problem with the connection between computer and the system; but there's definitely something wrong with the speakers... Any ideas here? I was really enjoying them up to this point...

Problem with A300 inspire

Similar Messages

Maybe you are looking for