Problem with Access Connections

V100 with intel Wireless.
The wireless is working perfect but when I press Fn F5 I get this error message:
"No supported wireless adapter (802.11, WAN or Bluetooth) are installed in this system.
And I cannot switch off the BT at all.

Hi,
this is not directly and error, but a message, that is present  usually also when you establish a correct internet connection.
This is the information, that the IP address is worng, or was till now not received and thus the system should refresh the IP address.
In this case I would advice to se the power mode to high performance of this one Wifi profile, that you are using, if this will make any change.
Cheers

Similar Messages

  • I have problem with Access Connections on L412 after that utilyty upgrade

    I have problem with Access Connections on L412 after that utilyty upgrade in early August. Windows 7 Ultimate/x64.
    It stops connecting to WPA2 Enterprise (AES-CCMP), Microsoft PEAP, no server cert, with any credentials I try to use. The same account(s) works with native Intel manager on other notebooks and on mobile devices. I lost the wireless connectivity to enterprise WiFi network.
    And, after deinstallation of Access Connections, the inability to connect keeped intact with native Win7 WiFi management.
    I think, something was broken in Access Connections 5.83 Build 83C753WW and some registry settings/ dll modules were altered but not returned to normal after deinstall.

    Access Connections is definitely broken for WPA encryption.  Both versions 5.02 and 5.84 fail for me.  If I use the Windows XP wireless configuration instead of Access Connections, everything works.
    Does anyone know how to report this to Lenovo?  I chased links around the web site but couldn't find a place.

  • Problem with Access Connection

    Hi there At the moment I am using Lenovo T61 with Vista Business & SP1. In addition I have got the Access Connection v 5.12 and Intel Wireless card number 4965agn.I saw that, when Wireless network is open my T61 can established connection with more than 130Mb transfer both by access connection and Vista systems settings.  Unfortunately when I set WPA/WPA2 security my T61 by vista settings can establish connection more than 130Mb but by access connection is established only 54Mb. I also saw that Access connection establish 802.11g standard (when the WPA is set) instead 802.11n. (When Wireless network is open then established 802.11n standard).Is possible to get any hotfix to Access Connection to solve this problem? RegardsPawel

    any idea?

  • T60p & Windows 7 Pro and Bluethoot problem with Access Connections.

    Hi,
    I reinstalled Windows 7 Pro (64bit) at my T60p laptop.
    I use Access Connections (v. 5.97) manage my wi-fi, lan connections.
    (installed with all features lan, wi-fi, modem etc.)
    So here is problem.
    When I start Access Connection. Bluethoot goes ON ...
    Trying disable Bluetooth via Access connectios (Power Off), but it's still going "ON" and stays "ON"...
    Any good solution to keep bluethoot off without disable it at bios?
    Earlier version of Access Connections keeps bluetooth OFF...
    /P

    If you are not using the Bluetooth and you want to disable it, the easiest way is to disable the device in the Device Manager.
    Go into the Device Manager by searching for Device Manager in the start menu, Open the Device Manager and select hardware, choose the Bluetooth device, right click, and finally choose 'disable'. If you want to use the Bluetooth device in the future you will have to return to the Device manager, right click and 'enable' the device.
    I hope this information has been helpful, please let me know if you have any further questions.
    Thank you for being a part of the Lenovo Family,
    Catie
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Donate KUDOS and Click "Accepted Solution"

  • Problem with Access Connections peer to peer comunity feature

    I am working on a project at work and would really like to use the P2P Community feature in Access Connections. In testing, I discovered that when using the P2P Community feature the software configures the wireless adapter to a static IP address and static DNS server. When the laptop disconnects from the P2P community and reconnect to a Wifi network, it can't because the IP/DNS defaults don't revert back to automatic.
    I could override the defaults by changing the settings in the location profile. But I work in a compay with 2000 laptops each has multiple connection profiles, not including the staff that have setup their own profiles. It would be unmanageable to update all the profiles.
    Is there a solution to this issue?
    thanks in advance

    Do your AC profiles have the Override TCP/IP and DNS Defaults box "ticked" on the Additional Settings tab on the profile?
    Also, are your current network settings on "Obtain an IP address automatically" and "Obtain DNS sevrer address automatically"?
    Cheers,
    Bill
    I don't work for Lenovo

  • Problem with JCo Connection Pool

    Hi,
    I have a problem with using an RFC Model in my WebApplication. So sometimes the access to the function block works, and sometimes it doesn't work. Now I know, that there is a problem with the connection pool. Look at this message:
    com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool WD_X24_MODELDATA_DEST_CPIC_REKTO_DE_useDefinedUser is exhausted. The current pool size limit (max connections) is 10 connections.
    So it looks like a problem with closing the JCo Connections after using. Do know where the problem is? Because I'm using many other function blocks with no problems.

    Hello,
    You need to increase the pool size via Visual Administrator.
    Server 0 -> Services -> JCO RFC Connections.
    Change the pool size from there. I believe a restart is in order.
    Regards,
    Jan

  • Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

    Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
    Detected Problems:
    - Access denied for attached mailbox (department mailbox)
    - Access denied for delete or move messages on own mailbox
    - Can't send new messages with error (Error: [0x80004005-00000000-00000000])
    Solution:
    - Rollback to Exchange 2010 SP3 - Rollup 7
    - You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
    Algunos de los destinatarios no recibieron su mensaje.
    Asunto:     Hola
    Enviado el: 11/12/2014 8:35
    No se puede localizar a los destinatarios siguientes:
    '[email protected]' en 11/12/2014 8:35
    Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red. 
    Error: [0x80004005-00000000-00000000].

    See the following forum thread: 
    https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

  • Problem with access to SMTP, IMAP, POP3 protocols in CAS 2013.

    Hi,
    we have problem with access thgrough SMTP, IMAP, POP3 protocols in CAS 2013.
    If I test connection to SMTP 25 port from other computer, session end quickly.
    Test from CAS2013 to localhost or public IP is OK (similar also for IMAP and POP3).
    Receive connectors are with defaults settings, firewall is disabled.
    Service Microsoft Frontend Transport Services restarted, but no success.
    Certificate is assigned to IMAP, POP3, SMTP, IIS.
    IIS and HTTP(s), protocols are OK. Clients can connects only thgrough web, mobile (ActiveSync), or with Outlook with proxy.
    Do you have some tip, what to test?
    If I create new testing receive connector on port 26 for anonymous, behaviour is same, quick disconnecting.
    Thank's Mirek

    Hi,
    Pleaser try to use the following link to test your STMP/POP/IMAP e-mail, and check the test if successful:
    https://testconnectivity.microsoft.com/
    If unsuccessful, please check the test result, it will tell us what caused the problem.
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Problems with Document Connect

    I have a problem with Document Connect. I am unable access office live workspace.
    I have been on the help line with microsoft but they were unable to help.
    Then I went to an apple store and was informed by one of the sales assistance that Document Connect never worked with the apple. Well what was the point in having it then?

    I wish I knew what Document Connect is. I'd bet I could fix it. Not really, but what is it?

  • Problems with Wireless connection AFTER 10.4.2 update

    I have read several topics on wireless problems AFTER the 10.4.2 update and wondering if anyone (or Apple) has found a fix to this problem. I cant get to my network or the internet via airport. I have tried zapping the pram, resetting the permissions, rebooting, checking for more update on a wired connection, reinstalling both 10.4.2 combo and 4.2 update and still nothing. This happened RIGHT after the reboot upon completion of the update. Im stuck and wondering if anyone has a solution or has any one SUCCESSFULLY contacted Apple and have they got a solution to fix the problem??

    I'm having the same problems with accessing my airport base station (first generation snow at 4.0.9) after loading the airport admin 4.2 patch. I loaded the 4.2 patch on my g5 and G4 running 10.3.9. The response/across of the wifi connection is very poor. I can't use chicken of the VNC to manage the G4 from the G5 anymore at all due to the slow response and accessing the internet via either the G4 or the G5 is like a dial up connection. The broadband speed test results are 192mb to 274mb up and similar down.
    I have a 12"powerbook (DVI 1gig version) with 10.3.9 that I have not loaded the 4.2 patch on and I am not having any issues with wifi access to the base station or the internet. broadband logs in right at 2.8mb via DSL. I also have a Dell laptop that I access the internet through the airport base station and I have no issues with speed and the same 2.8mb broadband speed test results.
    Conclusion something in the airport 4.2 patch has changed the airport cards ability to see the base station.
    With all that said, my question is - How do I back out of the 4.2 airport admin patch provided by apple or how do I resolve the slow response times between the airport cards in the G4 and G5 and the base station?
    Any help?

  • SAP Screen Personas error "A problem with network connectivity has been detected"

    Hi,
    We just installed Personas release 100 SP02 and performed the
    configuration steps necessary. But when we acces the url and logon to
    personas we get the following erre
    A problem with network connectivity has been detected.
    Please check you connection and refresh your browser.
    Any help to solve this issue would be appreciated.
    Best Regards.

    Please use this checklist to see if everything is correct:
    1. restgui service handler class has CL_HTTP_EXT_ITS_BASIC
    2. SPRO -> Sap screen Personas -> Maintain system has
           - 3 letter system id
           - "Server.Url" without typo and value in http(s)://<SERVER>:<PORT>/ format 
           - "Service.Uri" without typo and value as /restgui
    3, Note 2026487 is installed
    4. If target system is different from source system then you are able to access the following
             - http(s)://<TARGETSERVER>:<PORT>/clientaccesspolicy.xml
             - http(s)://<TARGETSERVER>:<PORT>/crossdomain.xml
    5. role is assigned to user under /n/persos/admin_ui -> User Maintenance -> Search -> Show user -> Role
    If you still get error, then if you are using SSO, please check if you have configured login/create_sso2_ticket parameter correctly.
    Thanks
    Chinthan

  • Problem with dropped connections...

    Hi,
    I'm having a problem with dropped connections. Let me explain...
    I have a computer with Windows XP SP3 where I have installed Toad, PuTTY and Oracle 10g client. I need to connect to several database and Linux hosts and have a strange problem. What happens is the following:
    1 - When I arrive at a customer location, I boot up my computer (I'm not using hibernate or standby) and plug-in to the network.
    2 - After I login to Windows, every session in PuTTY (to Linux), SQL*Plus or Toad (to database) gets dropped after only a few seconds.
    3 - I reboot my computer again, and everything works fine.
    I have no explanation for this beahavior. This happens across different customers, database versions and Linux OS kernels and versions. It seems to be related to something in my computer that is fixed on the 2nd restart.
    Has anybody experienced any similar problem?
    Thank you!

    pmcatarino wrote:
    I plug directly at client's site.
    And I can access the web and messaging on the first reboot... the only thing that appears to be malfunctioning is putty and toad as I stated above.
    Edited by: pmcatarino on Oct 24, 2008 6:25 PMDoes that mean you can ping to the server without problem when putty and toad having problem?
    If you install an Oracle client on your machine and configure TNS, will the sqlplus drop as well? Or download and install SQL Developer, see if SQL Developer having any problem connect.

  • Since upgrade to ios6 l have been having problem with wifi connection and connecting to App Store and iTunes store

    Q since upgrade to iOS6 l have been having problem with wifi connection and getting into App Store and itunes

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
    ~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Problems with ipod connection.

    Problems with ipod connection.
    I have problems to connect my ipod to computer windows 7.
    When I connect I get the following error:
    "We encountered an ipod, but could not be identified correctly. Disconnect and reconnect the ipod and try again."
    And it recognizes the ipod when trying to go play music or videos make me the following error:
    "Error while trying to copy on disk. The device is not connected."
    I've uninstalled all apple applications and re-installing, as I formatted the ipod and continues to set the same error.
    What else can I do?

    Hello,
    While your symptoms don't exactly match the descriotion, this article may be usefull in discovering if there is a setting on your computer that is causing this to happen.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    -Griff W.

  • Every time I try and update my iphone 4 to ios 7.1 in iTunes 11.1.5 it says "connection reset" even when there is no problem with my connection

    I have an iPhone 4. I use iTunes 11.1.5 on my Mac. I am trying to update to ios 7.1 through iTunes, but every time I do that, I get a "connection reset" error, even when I know there has been no problem with my connection.
    The exact error message is as follows:
    "There was a problem downloading the software for the iPhone "Anne's iPhone". The network connection was reset.
    Make sure your network settings are correct and your network connection is active, or try again later."
    I have checked several times. There is no problem with the connection, and I have tried to download the software several times today.
    Any help you can give me would be appreciated.

    Just managed to successfully download the update, having retried five or six times. I did unplug my phone while the download was taking place (had asked iTunes to download only, not to update) -- suspect this had no bearing on it whatsoever, and that persistence is the only way here.

Maybe you are looking for