Problem with accessing features as a host

I just started using Adobe Connect. I created a New Meeting under Shared Meetings. When I open the room, I'm added as a participant vs. a host. Therefore, I don't have access to change the room layout, record, etc. I am listed as a host under "Role." Am I accessing the room incorrectly?
Does it matter if I create a room under Shared Meetings vs. User Meetings?
Also, how can I find which features are available with the license that I am using? I'm wondering if the license is limiting what I can and cannot do.
Thanks.

I'll make an assumption here, so correct me if I'm wrong. I believe you are using the Named Host licensing model. I would venture to guess you are in the Administrator group, and used that license/user ability to create a meeting in the Shared Meetings folder and add yourself as a Host of that room.
However, to activate (for lack of a better term) the room and allow you and others in the room to be at a role above Participant, you must be a member of the Meeting Host group. Addd your self to that group, and then go back into the room you created and you should have full Host rights. If you don't you may want to either clear your browser's cookies or wait 7-15 minutes, with the room closed, to allow the session for that room to be ended by the server, and then go back into your room.
The rooms location on the server should have zero effect on access and functionality on the room.
Here is a description of the Connect licensing and how those licenses work: Setting the Record Straight on Adobe Connect Licensing | RealEyes Media

Similar Messages

Indesign CS 5.5 problems with accessibility features

I am required to create 508 accessible documents for the government agency I work for. The new features in Indesign allow you to export your document to an accessible pdf using the articles panel, export paragraph styles to tags and object tagging. My question is this. It all works fine. The tags are great, it passes the accessibility check but you would expect the order panel to match the tags order and it does not. In the training on Adobe tv http://tv.adobe.com/watch/accessibility-adobe/part-2-exporting-and-finalizing-your-pdf/ they never even look at the order panel. I always have to reoder the tags in the order panel. will Adobe be addressing this issue?

I've also posted the same problem in another thread. No matter if I use the Structure Pane or the Articles Pane within InDesign, once I open the file in Acrobat, the reading order still is incorrect. I found this solution (below) from another User, tested it, and it works. I really have an issue with the pdf "passing" the Accessibility test when the file is not Section 508 compliant.
In Indesign, reorder ALL the objects on page using send to back, starting with the last object on page you wish read, continuing until the object you want read first in acrobat is sent to the back last in InDesign. The result is that the Reading order is correct in Acrobat. Obviously, any object additions to a page means re-ordering the whole page. Changing copy doesn't affect this. Also, the order of objects on a page has no relationship to the page structure. It appears that the object reading order is as objects are added to page. Ist added (and furthest back), 1st read, last added (nearest front), last read. Shuffling the objects in the Document Structure pane has no effect on this order (and vice-versa).

Problems with extended features. I can no longer fill out my documents in the fields provided. The

Problems with extended features. I can no longer fill out my documents in the fields provided. The error message I get is "This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer available. Please contact the author for original version of this document."

Yes. I don't have the version you pay for. I also tried the free version
of EchoSign. Maybe that caused the problem.
Any more suggestions would be greatly appreciated.
Estelle Oliansky
Estelle OlianskyRealtor, SRESCell (734) 748-2329
*3DX Real Estate *| www.3dxonline.com* | (v) 888.304.1447 ext.
102 | (f) 888.304.1456 | 42705 Grand River Ave. Ste. 201 | Novi, MI 48375*
P Please consider the environment before printing this e-mail
This electronic mail message and any attachments contain information
that(a) is or may be LEGALLY PRIVILEGED, CONFIDENTIAL, PROPRIETARY IN
NATURE, OR OTHERWISE PROTECTED BY LAW FROM DISCLOSURE, and (b) is intended
only for the use of the Addressee(s) named herein. If you are not the
intended recipient, an addressee, you are hereby notified that reading,
using, copying, or distributing any part of this message or any information
transmitted herewith is strictly prohibited. If you have received this
electronic mail message in error, please contact us immediately and take
the steps necessary to delete the message completely from your computer
system.

Problem with Access Policies (create multiple resources)

I'm having a problem with Access Policies:
The first policy must create a resource.
And the following policies should create childs on the resource.
The problem here is that when policies will add the childs, the resource is not provisioned yet.
And then each one will create a resource but i just want one resource with the childs.
When the resource is already provisioned, the policies update this resource properly.
How can I fix this?
tks

Ricardo,
I had a similar problem. In a post-process handler I was managing the user membership in specific roles through the removeMemberUser and the addMemberUser of the tcGroupOperationsIntf class.
The last parameter of this method was a boolean which, when true, would automatically trigger the access policies programmatically in the post-process.
The problem is that there also is an OOTB event handler for triggering access policies, so I was basically triggering the access policies twice and duplicated resources were appearing.
Hope this helps.
Cheers

Problem with access to SMTP, IMAP, POP3 protocols in CAS 2013.

Hi,
we have problem with access thgrough SMTP, IMAP, POP3 protocols in CAS 2013.
If I test connection to SMTP 25 port from other computer, session end quickly.
Test from CAS2013 to localhost or public IP is OK (similar also for IMAP and POP3).
Receive connectors are with defaults settings, firewall is disabled.
Service Microsoft Frontend Transport Services restarted, but no success.
Certificate is assigned to IMAP, POP3, SMTP, IIS.
IIS and HTTP(s), protocols are OK. Clients can connects only thgrough web, mobile (ActiveSync), or with Outlook with proxy.
Do you have some tip, what to test?
If I create new testing receive connector on port 26 for anonymous, behaviour is same, quick disconnecting.
Thank's Mirek

Hi,
Pleaser try to use the following link to test your STMP/POP/IMAP e-mail, and check the test if successful:
https://testconnectivity.microsoft.com/
If unsuccessful, please check the test result, it will tell us what caused the problem.
Thanks.
Niko Cheng
TechNet Community Support

Problem with access to SipFactory from jsp-pages in JBoss environment

Hello!
I have an installation of the OCMS 10.1.3.3. deployed into a JBoss (jboss-4.0.5.GA) environment. Unfortunately I have a problem with accessing the SipFactory from a jps-page. Encouraged by the "messagesender" example I tried to get an instance of SipFactory from my jsp-page simply by calling:
SipFactory sipFactory = (SipFactory) application.getAttribute(SipServlet.SIP_FACTORY);
But unfortunately there seems to be no attribute "SipServlet.SIP_FACTORY" and I only get a null pointer. I have also tried running that code in the orignal messagesender example but it didn't work either. So I wonder if this should definetely work in a JBoss environment or if this might be a known problem. Is there anything that I could check/do regarding this problem? I suppose there must be an oracle module which should take care of making the SipFactory availabe after it is deployed. Perhaps something went wrong during the deployment?!
Best regards,
Tim

Hi
On JBoss, OCMS does not support converge applications.
I.e the SipFactory can be retrieved from the servlet context when running on OC4J.
Instead the SipFactory can be found in JNDI as described in the Developer's Guide:
"External Access to SIP Servlets
To enable convergent applications between SIP and HTTP, the OCMS Container allows you to get access to the javax.servlet.sip.SipFactory by looking it up through JNDI. The SIP Factory will be registered under the same name as the display name of your SIP servlet as illustrated in Example 2–12. The <display-name> in the sip.xml in this case must be "My sip app".
Example 2–12 Accessing the Data for a SIP Session through JNDI
InitialContext ic = new InitialContext();
SipFactory sipFactory = (SipFactory)ic.lookup("sip/My sip app");"
Cheers
Lucas Persson

I have problem with Access Connections on L412 after that utilyty upgrade

I have problem with Access Connections on L412 after that utilyty upgrade in early August. Windows 7 Ultimate/x64.
It stops connecting to WPA2 Enterprise (AES-CCMP), Microsoft PEAP, no server cert, with any credentials I try to use. The same account(s) works with native Intel manager on other notebooks and on mobile devices. I lost the wireless connectivity to enterprise WiFi network.
And, after deinstallation of Access Connections, the inability to connect keeped intact with native Win7 WiFi management.
I think, something was broken in Access Connections 5.83 Build 83C753WW and some registry settings/ dll modules were altered but not returned to normal after deinstall.

Access Connections is definitely broken for WPA encryption. Both versions 5.02 and 5.84 fail for me. If I use the Windows XP wireless configuration instead of Access Connections, everything works.
Does anyone know how to report this to Lenovo? I chased links around the web site but couldn't find a place.

Why do i have a problem with accessing images in adobe muse

why do i have a problem with accessing images in adobe muse ??????!!!!!
i need heeeeeelp ASAP
pleeeeease

I am on the begining stages with constructing the web so i do not have yet URL. The problem is i can not insert any image any way. Whether by fill a browser or by place image, i have the same issue. All the images with all image's format unable to be selected and it is turned off
I really need help plz
Is there any info i can supply that would help you figiring out the problem ??

Can Play iTunes Library from PC on MacBook Air but cannot import, problem with access rights?

I can play Itunes library from Windows Vista PC on my MacBook Air using homeshare but cannot import the library . Error message is problem with access rights. Latest OS and Itunes installed. Both computers registered with Apple on same Apple ID. Wifi Router turned on and off. Still does not allow importing. Any suggestions please?

Might be an alternative for you here > iTunes: How to move your music to a new computer

Just wondering if anyone has a problem with accessing iTunes store. have iTunes installed but can't bring up the store home page?

Just wondering if anyone has a problem with accessing iTunes store. have iTunes installed but can't bring up the store home page?

i have the same problem! Safari won't work either. Can anyone help please? I have completely restored my computer trying to fix this and it still won't work! I have a 2 month old alienware laptop running windows 7

Problem with access to Ironport C370

Hi,
We have C370 (upgraded to last version) configured and everythings work fine! But one day, from some reason, we cant access Ironport via HTTPS, HTTP and SSH, only works ping. Problem with network is not because we try access Ironport direct from Managment port. After reboot, then access is fine. Please can you tell me how I can figure out what was a problem, which logs I need to analyze.... Why I could not access to ironport via HTTP/S, SSH?

I dont think that problem is exchange because problem also was about accessing to ironport, I think that some problem is on ironport:
Tue Apr 16 16:08:52 2013 Info: New SMTP DCID 15929874 interface 172.30.20.4 address 65.55.37.88 port 25
Tue Apr 16 16:08:52 2013 Info: ICID 5276886 Receiving Failed: Out of Memory
Tue Apr 16 16:08:52 2013 Info: ICID 5276886 close
Tue Apr 16 16:08:53 2013 Info: Delayed: DCID 15929873 MID 11206813 to RID 0 - 4.1.0 - Unknown address error ('450', ['too many connections from your IP (rate controlled)']) []
Tue Apr 16 16:08:53 2013 Info: MID 11206813 to RID [0] pending till Tue Apr 16 17:08:53 2013 [Default]
Tue Apr 16 16:08:53 2013 Info: Connection Error: DCID 15929873 domain: shop.com IP: 216.136.0.12 port: 25 details: EOF interface: 172.30.20.4 reason: network error
Tue Apr 16 16:08:53 2013 Info: ICID 5276890 Receiving Failed: Out of Memory
Tue Apr 16 16:08:53 2013 Info: ICID 5276890 close
Tue Apr 16 16:08:53 2013 Info: New SMTP DCID 15929875 interface 172.30.20.4 address 216.136.0.12 port 25
Tue Apr 16 16:08:53 2013 Info: Delivery start DCID 15929874 MID 11744351 to RID [0]
Tue Apr 16 16:08:53 2013 Info: New SMTP ICID 5276899 interface data (172.30.20.4) address 172.29.18.137 reverse dns host unknown verified no
Tue Apr 16 16:08:53 2013 Info: ICID 5276899 RELAY SG RELAY match 172.0.0.0/8 SBRS rfc1918
Tue Apr 16 16:08:53 2013 Info: Connection Error: DCID 15929874 domain: hotmail.com IP: 65.55.37.88 port: 25 details: 421-"RP-001 (COL0-MC2-F35) Unfortunately, some messages from 195.222.56.65 weren't sent. Please try again. We have limits for how many messages can be sent per hour and per day. You can also refer to http://mail.live.com/mail/troubleshooting.aspx#errors." interface: 172.30.20.4 reason: unexpected SMTP response
Tue Apr 16 16:08:53 2013 Info: Delayed: DCID 15929874 MID 11744351 to RID 0 - 4.3.2 - Not accepting messages at this time ('421', ["RP-001 (COL0-MC2-F35) Unfortunately, some messages from 195.222.56.65 weren't sent. Please try again. We have limits for how many messages can be sent per hour and per day. You can also refer to http://mail.live.com/mail/troubleshooting.aspx#errors."]) []

T60p & Windows 7 Pro and Bluethoot problem with Access Connections.

Hi,
I reinstalled Windows 7 Pro (64bit) at my T60p laptop.
I use Access Connections (v. 5.97) manage my wi-fi, lan connections.
(installed with all features lan, wi-fi, modem etc.)
So here is problem.
When I start Access Connection. Bluethoot goes ON ...
Trying disable Bluetooth via Access connectios (Power Off), but it's still going "ON" and stays "ON"...
Any good solution to keep bluethoot off without disable it at bios?
Earlier version of Access Connections keeps bluetooth OFF...
/P

If you are not using the Bluetooth and you want to disable it, the easiest way is to disable the device in the Device Manager.
Go into the Device Manager by searching for Device Manager in the start menu, Open the Device Manager and select hardware, choose the Bluetooth device, right click, and finally choose 'disable'. If you want to use the Bluetooth device in the future you will have to return to the Device manager, right click and 'enable' the device.
I hope this information has been helpful, please let me know if you have any further questions.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

Problems with accessing Internet through router (permanent IP)

Hi.
I changed hostname with sys-unconfig. Now computer has permanent IP address (non DHCP) and right hostname.
Before this change I had access to Internet (hostname: "unknown" and DHCP).
My computers access Internet through router.
There is ping from my computer to router and another computer. Also other computer pings my computer.
In DHCP tables my computer does not exist.
I created file /etc/defaultrouter with IP of my router.
Trying to access Internet, web browser (Mozilla) writes: "<site.com> could not be found. Please check name and try afain."
I think there is a problem with DNS.
How to configure my computer on Solaris 10 to access the Internet with current configuration?
Thank you.

To test DNS services without a browser (ie, to see if the
system can be a DNS client), first use the command
'nslookup'
# /usr/sbin/nslookup sun.com
Server: miki-class-gla.eclecticgroup.co.uk
Address: 10.23.0.1
Non-authoritative answer:
Name: sun.com
Address: 72.5.124.61
# /usr/sbin/nslookup google.com
Server: miki-class-gla.eclecticgroup.co.uk
Address: 10.23.0.1
Non-authoritative answer:
Name: google.com
Addresses: 64.233.167.99, 64.233.187.99, 72.14.207.99
If this doesn't work, then your system isn't talking to a
DNS server at all at all, so you need to check the contents
of /etc/resolv.conf.
If it does work, use the command 'getent' to check that your
system as a whole is querying DNS for name-IP resolution.
EG.
# getent hosts sun.com
72.5.124.61 sun.com
# getent hosts google.com
64.233.187.99 google.com
72.14.207.99 google.com
64.233.167.99 google.com
If you don't get back IP addresses, your system isn't
correctly configured as a DNS client.
Look at /etc/nsswitch.conf, and find the line
that starts 'hosts'.
If it says
hosts files
then the system is not a DNS client.
To correct this, edit that line to add the word dns on the end:
hosts files dns
That's it. No need to reboot.

My problem with access privileges

Hi there...
So here's my problem. I've had the one Account/User on my MacBook for a very long time. When I purchased an iPod Touch I decided to create a New Account on the same MacBook to manage this iPod, so that my old iPod could stay synced with my original admin account.
I set the new account up as an Admin and thought this would solve any problems with writing/reading any files. However, when I went to move the music files I wanted into the iTunes to put on my iPod Touch I ran into an error. As this was some time ago, I'm not 100% sure but I believe I had to set the "Music" folder as having Read AND Write privileges. And everything seemed to run fine. Even songs I downloaded onto my Touch through the iTunes wireless store would transfer over to my MacBook without a problem.
However, recently I have encountered problems with my system. Songs that I have downloaded onto my Touch won't transfer onto my MacBook. It tells me that I do not have sufficient access privlidges even though when I go to the "Get Info" section of my "Music" folder it is still set as Read and Write. And also, now I'm trying to download the new software for my iPod Touch but again I get the same message about Access Privlidges.
I have no idea why this is now a problem when before it seemed to work fine. So now I would like to know if there anyway of setting it so that both my Accounts on my MacBook can do WHATEVER they like. They are both set as Admins, but it seems as if my one for the Touch is restricted. So I would love it to have the exact same Access Privlides as my original account. Or if this is not possible, I would love to hear about other possible ways of correcting this problem.
Thank you for you time and I'm looking forward to hearing back from you.

If you have two user accounts, even if both are admin accounts, one user cannot access the files in another user's Home folder unless they are specifically shared. If you want both users to be able to access the one iTunes music library, then you must share the library by activating that feature in iTunes' sharing preferences of the account that "owns" the library.

Connector problem with access enforcer

Hi Guys,
I am facing a really strange problem with my connectors.
We have a test installation of GRC which was down for about 3 months.
During this time we migrated our central SLD to another system so I needed to change the connection after getting the system up again.
Anyhow I still can't modify, test or even create a new connector for access enforcer.
The only error I get is "Action failed".
I tried to analyze the logs but found no help there too.
2007-06-18 20:41:56,833 [SAPEngine_Application_Thread[impl:3]_4] ERROR java.lang.NullPointerException
java.lang.NullPointerException
     at com.virsa.ae.dao.sqlj.SAPConnectorDAO.iterToDTO(SAPConnectorDAO.sqlj:75)
     at com.virsa.ae.dao.sqlj.SAPConnectorDAO.findByConnectorName(SAPConnectorDAO.sqlj:15)
     at com.virsa.ae.configuration.bo.ConnectorsBO.findSAPConnectorDetails(ConnectorsBO.java:76)
     at com.virsa.ae.configuration.actions.ManageConnectorsAction.testConnection(ManageConnectorsAction.java:163)
     at com.virsa.ae.configuration.actions.ManageConnectorsAction.execute(ManageConnectorsAction.java:66)
     at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:229)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:412)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code))
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
Did anybody here face a problem like that?
Kind regards,
Bastian
Message was edited by:
        Bastian Schneider
Message was edited by:
        Bastian Schneider

I had a simular problem with CC and I had to contact SAP. They gave me a script to run against the database that remove the connector. The problem seemed somewhat common for CC 5.1. Not sure if this applies to AE.

Problem with accessing features as a host

Similar Messages

Maybe you are looking for