Problem with ACR 4.2 in Bridge

After updating to ACR 4.2, I can no longer open RAW (or DNG) files in
Bridge. The files always open in Photoshop. Could I have done something
wrong?

Thanks for the help. I was the cache. I tried purging from "Edit -> Camera Raw Preferences...", and that didn't fix it. Then, I tried deleting the files manually (I must have missed some), and that didn't work. Finally, I purged from "Edit -> Preferences -> Cache" and everything works! Thanks again! - Jeff <[email protected]> wrote in message news:[email protected].. > Jeff > > You should read the part about ACR install on Windows, I Use Mac and can't > tell you where to put it but it is a very critical install, Not difficult > but you have the follow the instructions carefully and then it will work. > > Bridge 2 has a different cache management with it's own problems, there > are many treads about that in the Bridge forum. However, it does work! > > You should go to the Bridge preferences and check the box with > "Automatically Export Caches to Folder When Possible." > > Remember that the files are by default invisible, in the menu go to View > and select "show hidden files". If your cache is written to the folder > there should be 2 files (blank paper with above right corner folded) and > named: > .BridgeCache and > .BridgeCacheT

Similar Messages

Problems with ACR

Hi all,
Having a problem with ACR on the photoshop trial.
I'm hitting CMD + Option + 0 to go to 100% and it is doing so, but it is also going to the next picture at the same time. I then have to go back to the previous which is then at 100% as I asked but it has taken me a gazillion seconds to do it. On windows it was much simpler - how do I solve the problem?
Thanks,
Fred

Hudechrome wrote:
I suspect the two are related.
Highly doubtful...in the case of the BSOD, you have a hardware problem somewhere. Could be processor, memory, motherboard or other devices such as video card or driver but software should not be able to bring hardware down like that.
In terms of the DNG profiles, odds are when you rebuilt you didn't re-install the profiles (they were bundled with the DNG Converter). Download DNG Converter 5.6 and run the install.

Problems with running Photoshop CS6 and Bridge with Lightroom 4 also on the same PC

I was running Photoshop and Bridge, then purchased Lightroom 4. Before installingt 4 I had no problems with Bridge, but since installing 4 all of the photo's that were held in bridge are now gone, but they are in Lightroom. With Lightroom, you are able to edit photos out of Lightroom and into Photoshop when necessary, save and close and it automatically changed the Lightroom picture.
I have two PC's, one has Bridge on it (this one) and the other without, but both have both editing prgrams installed. On the other PC I can switch between Lightroom and Photoshop with no problems, but when I try to switch with this PC, the one with Bridge installed, it will open Photoshop, but the photo will not transfer. If I close Photoshop program and go back to Lightroom, it will tell me that the picture could not be transfered to Photoshop because it would not launch. If I close that message window, it will then launch Photoshop and the picture transferes over allowing me to edit and save as normal.
My question is; does anyone know if Lightroom and Bridge should run side by side, or should I delete Bridge from this PC and see what happens. Bridge is just a holder and organizer of photos, wherease Lightroom does the same, but also has post editing capabilities. The two programs seem redundant, but if your running Photoshop, it's hard to get files out of Lightroom. It seems that you need to open Lightroom first, then you can view and chose a photo to work on, then move it back and forth between the two programs. This seems to make Bridge redundant.
Thanks for any help or suggestions.
he_b_gb1947

Hi, Yes, but that actually wasn't the problem. I start out in Lightroom,
then move to Photoshop if I have something that can't be fixed in
Lightroom. The problem was that when I tried to edit, out of Lightroom and
into Photoshop, I was getting an error message that Lightroom couldn't
prepare files for transfer because Photoshop wouldn't open. But, it had
opened, the picture just wouldn't transfer. If I closed Photoshop,
Lightroom would try again and it would open and transfer the second time. I
ended up going to the Adobe help, chat line, and they looked into my PC and
located the problem, it's now working fine. Thanks to everyone for your
inputs. Most appreciated.
Gary

Problems with Russian characters in BB Bridge

Some time ago my contact list on BB 9800 was updated using Desktop software for Mac. Some of contacts were written in Russian. Same updates were made for MemoPad as well in the same manner. Everything was good on the smartphone side before I made an attempt to sync my phone with Playbook. Both sections refused to sync! After removing manually all contacts and memos with Russian font, the sync went normal again. There are a lot of problems with Playbook, which cost me my time and money. This was just one of them... Why not to say it clear - do not try to sync Russian characters?

Same problem when I use Chinese.
The only thing we can do now is to wait for an update! Which is hopefully make the Playbook worth something!

Problem with showing My Computer in Bridge

Just upgraded PS CS4 to CS5. When I click on the favorites or the Folders tabs in Bridge and select My Computer, the program displays the drives and then starts adding My Documents over an over without stopping...after 1 minute I had >50 icons for My Computer. It was annoying because it kept displacing the drives to the right as it inserted a new My Doc icon, and I couldn't catch the icon for the other drives to open them!
In Minibridge, it displays just three duplicate My Documents icons???
Anyone have an inkling as to what might be happening here, or how to prevent it?
Many thanks,
A

Thanks for the help. I was the cache. I tried purging from "Edit -> Camera Raw Preferences...", and that didn't fix it. Then, I tried deleting the files manually (I must have missed some), and that didn't work. Finally, I purged from "Edit -> Preferences -> Cache" and everything works! Thanks again! - Jeff <[email protected]> wrote in message news:[email protected].. > Jeff > > You should read the part about ACR install on Windows, I Use Mac and can't > tell you where to put it but it is a very critical install, Not difficult > but you have the follow the instructions carefully and then it will work. > > Bridge 2 has a different cache management with it's own problems, there > are many treads about that in the Bridge forum. However, it does work! > > You should go to the Bridge preferences and check the box with > "Automatically Export Caches to Folder When Possible." > > Remember that the files are by default invisible, in the menu go to View > and select "show hidden files". If your cache is written to the folder > there should be 2 files (blank paper with above right corner folded) and > named: > .BridgeCache and > .BridgeCacheT

A problem with ACR in Photoshop CS 6 (Mac).

When using "Edit in Photoshop CS6" from Lightroom 4 I just go into Photoshop CS6, not Adobe Camera Raw (ACR). Cannot access ACR directly from withion Photoshop either. It works from Bridge tho'. Have checked out many forums and see other people with this problem, but main help responses, to remove com.adobe.Photoshop.plist from Library/Preferences, or reinstalling Photoshop and Lightroom, do not resolve it for me. All software, including Camera Raw (7.2.0.46) is up to date. Use 16 GB iMac and OS X 10.8.2.
Any help much appreciated.
Peter

Peter Sanderson wrote:
Until a few days ago, when working in Lighroom 4, when I clicked "edit in photoshop", it always opened in Camera RAW, which I found useful. Now it just opens in Photoshop. I cannot figure out why this is happening. [...]
Suspect from my readings on further forums, that the previous mode of opening in Camera Raw may have been a bug, which I had assumed to be the norm!!
Yep, sounds like there was a bug and now you're seeing correct behaviour.
Something that might be useful to you is Lr's "Edit In > Open as Smart Object in Photoshop". That'll open a document in Ps with a SO containing a duplicate of a file. Double-clicking that SO will open its contained file in Camera Raw.

Problem with opening "Photoshop tools" in Bridge

hello, when I use Bridge and I tried to use the photoshop's tools after selecting an image, photoshop doesn't open. could it be a problem of permissions? I use windows 7.

If both Bridge and Photoshop scripts are checked, and computer rebooted since selections were made, then perhaps you need to reset preferences for Bridge. Hold down the crtl key and start bridge. You should get a reset window with 3 options.
By a tool I am assuming something like Image Processor. Sorry if I ask stupid questions, but believe me many times concepts get lost in translation to the screen.

Problem with ACR 7 support of Canon 5D Mark III

Just purchased LR4 with ACR7 (upgrade from LR3.6 - not happy about that either, but I am mostly over it) and tried to import photos from my Canon 5D Mark III. Import feature sees all the .CR2 files but when I try to import them it complains that it does not recognize that file format. Not happy.

Unfortunately two important cameras, the Canon 5D.3 and the Nikon D800, came out during the transition between LR3/4 and PS-CS5/6 so Adobe released beta versions of LR and ACR to help tide people over, but what gets released when is kindof messy during the transition.
A major version release requires debugging and testing so the functionality, including new camera support, must be frozen earlier as compared to mid-version camera-support releases that have minimal coding changes. ACR7-beta functionality was frozen back in February so has even less camera support than ACR6.7 beta, which confused PS-CS6-beta users as well.
Just so you’re aware, there is a bug when doing extreme adjustments in the new toning model and geometric lens-corrections have been applied, so be careful with that in the new LR4.1 RC2. Eric Chan has said the bug will be fixed in the release version of LR 4.1. The same bugs exist in the final ACR 6.7 that came out within the last week, so it is unclear what the status of a bugfix is for PS-CS5 users.
Here is a forum post with more information. Also check out the other threads people refer to with other examples of the bug:
http://forums.adobe.com/message/4380573#4380573

Problems with ACR v8.3 and grayscale

I've upgraded to ACR v8.3. Now when I save from ACR to a jpg, and bring it later into PS CC it is grayscale. If I open it in ACR into PS, it is in colour. Have I inadvertently ticked a box somewhere please? It's happening with all raw files. Thanks

Sounds like the setup in the DVD-player is wrong. Enter the menu in the DVD set-top player, and tell it what kind of TV you are using (4:3/16:9).
Also make sure that you have tagged the tracks in DVDSP correctly. In the Inspector, select 4:3 for the 4:3 track, and 16:9 Letterbox for the 16:9 tracks.
Message was edited by: Olse

Problem with ACR 7 auto tone?

Still trying to get a handle on this beast, playing with various controls. Here's a snapshot with default settings and then after auto is invoked. Default appears ok, just a small bit of clipping, but unless I'm missing something something is wrong with auto.
Richard Southworth

'Auto Tone' is simply not good enough to bother using, IMO. (not a big deal for me, since I prefer to "manual" tone anyway, still...).
PS - I have seen this over-darkening behavior in the past which I believed was due to a single overextended channel, which for reasons I don't understand, was not shown in the Lightroom histogram, but you can see it in the histogram of the Mfr. software.
Rob

Problems with sun's jdbc:odbc bridge under Tomcat 4.0

I keep getting this error when I try to access through jdbc:odbc sun's drive:
java.sql.Exception: [Microsoft][Administrador de controladores ODBC] No se encuentra el nomb
re del origen de datos y no se especific� ning�n controlador predeterminado
at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6106)
at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:6263)
at sun.jdbc.odbc.JdbcOdbc.SQLDriverConnect(JdbcOdbc.java:2488)
at sun.jdbc.odbc.JdbcOdbcConnection.initialize(JdbcOdbcConnection.java:3
17)
at sun.jdbc.odbc.JdbcOdbcDriver.connect(JdbcOdbcDriver.java:160)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
Translating the local spanish message, should be something like: "Can't find data source and no default driver defined."
I don't get this error if i access through the same driver but not on web server Tomcat 4.0.1. And I don't get this error even under Tomcat with other jdbc drivers (mysql for example).
Someone knows what is happening here?
I would apreciate some help.
Thank you.

If you're running on Windows, you need to create an ODBC datasource to connect to.
To accomplish this, you need to go to Start >>> Control Panel >> Administrative Tools >> Data Sources (ODBC),
2. On the User DSN tab, click add
3. give it a name, this is the name you will use in the connection string. jdbc:odbc:<name>
4.Click Select, then find your mdb file, or other database file.
5. click Ok.

Problem with Xperia P and Sony Bridge for Mac

hi there,
I'm trying to update my Xperia P to ICS and, since I've not received any notification, I'm using Sony Bridge for Mac (my phone is not firmware branded).
So, i plug my phone at the mac, starting Bridge and wait for the download... until my phone turn off itself and Bridge advice me that no phone is connected. How can i solve?
Thanks

Unfortunately it's not possible to get back to Android 2.3 if you have updated to Android 4.0 I'm afraid.
To be able to sort it out and get the phone back to the way it should be - now slow or "laggy" - I'd recommend you to try performing a repair of your phone's software first of all.
Just follow the instruction above given by my colleague Samuel and you'll hopefully easily solve the issue. Fingers crossed!
What do you think about this forum? Let us know by doing this short survey.

Bridge CS 6 preview problem with video files

Hey Community,
I have a problem with the preview in Adobe Bridge Cs 6.
With the pictures and photos everything is fine, but every kind of video format is not displayed as a preview in the preview window, so that I have to open each video manually by doubleclicking on it, so that it is opens in Quicktime.
Is there an opportunity to get that fixed? I just see the Quicktime or VLC-Icon, nothing more.
I tried to purge to cache, to set everything to defaults but nothing worked.
Thank you in advance und best regards.
Alex

Doubleclicking on the files in Bridge causes that quicktime or VLC or itunes (depending on the file format) will open that, but bridge does not handle anything?!
Bridge CC and Bridge CS6 both handle my .mov files from EOS 1Dx and iPhone without any problems. The show in the preview window and can be played with sound in this same window. (MacPro with 10.8.4)
Purging cache is what it is, it dumps the previous cache of the preview and forces Bridge to create a new one, nothing else is set to default.
First try a reset of preferences and hold down option key while restarting Bridge and choose reset prefs. then try again.

D200 white balance presets problem or ACR problem?

Last night I was playing around with my D200 and an SB800. The scene was just a sofa with a Gretag-Macbeth 24 Patch Color Checker. The object was to see what results I got with the SB800 with the D200 set to the various preset White balance values. (I should point out that the lighting was mixed, but that is not relevant to the results I see.)
I set the D200 to each of the preset white balance values and then opened the NEF file in ACR. The preset temperature (from the D200 Manual) and the temperature/tint values reported as "As shot' by ACR are shown in the table below.
D200 ACR 'as shot'
preset temperature/tint
tungsten 3000 2950 / 0
fluorescent 4200 3950 / +31
daylight 5200 4950 / -3
flash 5400 6150 / -9
cloudy 6000 5550 / -7
shade 8000 7100 / +3
First of all I don't care if the temperature reported by ACR agrees with the preset temperature quoted by Nikon. What puzzles me is the discontinuity in the values reported by ACR when going from 'flash' to 'cloudy'. Is this a problem with ACR or with the Nikon preset values for these two settings?

>First of all I don't care if the temperature reported by ACR agrees with the preset temperature quoted by Nikon. What puzzles me is the discontinuity in the values reported by ACR when going from 'flash' to 'cloudy'. Is this a problem with ACR or with the Nikon preset values for these two settings?
Bob,
A full answer to your question would require a response by Thomas Knoll or some other ACR expert with knowledge of how Nikon records the white balance and the algorithm used to apply the white balance. However, I can bring up a few points which may shed some light on the matter.
One should first consider what white balance information Nikon cameras write to the NEF file. The following table refers to the D70 and similar Nikon cameras before encryption of the WB.
http://www.ozhiker.com/electronics/pjmt/jpeg_info/nikon_mn.html
The settings of daylight, flash, tungsten, etc are written as descriptive strings, not actual degrees Kelvin. Nikon considers daylight to be 5200K, but Thom Hogan writes that this value often produces a blue result and 5400K might be better.
The bias value refers to fine tuning between the above descriptive settings, approximately 100 Mired per increment. Finally, the red and blue coefficients are recorded (green would be redundant). Some raw converters such as DCRaw use these coefficients for the "as set" white balance. There is nothing corresponding to the ACR tint, which adjusts in the magenta green axis, whereas the color temperature slider adjusts in the yellow-blue axis. The degrees Kelvin figure specifies the white balance only for a black body radiator.
Thus there several ways to interpret the WB data. Mr. Knoll has written previously that ACR attempts to produce a neutral white balance appearance rather than the WB numbers. An interesting experiment would be to determine which converter (ACR or Nikon Capture) gives a more neutral white balance on your color checker with the above settings.
Bill
http://www.adobeforums.com/cgi-bin/webx/.3bbc87b2/0

Stange whitebalance problem with CR2 files

Hello
Ive been taking som underwaterphotos with my canon 50D. Now it seems there are some problems with ACR ability to interpreting the CR2 or DNG file.
The pictures have green tint I am unable to get rid off.
If I process the CR2 file in canons DPP converter, everything looks perfect.
I have no idea why this is. Any help would be much appreciated.
Heres a link to a CR2 file for you to have a look at.
www.animato.dk/img_9116_cr2.zip
And heres a DNG:
www.animato.dk\IMG_9116.zip
Ive posted this problem in lightroomforums but it seems this is an ACR matter.
http://www.lightroomforums.net/index.php?topic=7879.0
Thanks for ur help

That was a quick and precise advice, Ian
I've tried what's described in tutorial 4 and it works perfectly. Just reference the exported Camera Profile (e.g. "Canon EOS 50D Underwater") in LR and you're able to do the WB adjustment in LR.
BTW: DNG Profile Editor can be downloaded from here.
Beat Gossweiler
Switzerland

Problem with ACR 4.2 in Bridge

Similar Messages

Maybe you are looking for