Problem with ACR 7 auto tone?

Still trying to get a handle on this beast, playing with various controls. Here's a snapshot with default settings and then after auto is invoked. Default appears ok, just a small bit of clipping, but unless I'm missing something something is wrong with auto.
Richard Southworth

'Auto Tone' is simply not good enough to bother using, IMO. (not a big deal for me, since I prefer to "manual" tone anyway, still...).
PS - I have seen this over-darkening behavior in the past which I believed was due to a single overextended channel, which for reasons I don't understand, was not shown in the Lightroom histogram, but you can see it in the histogram of the Mfr. software.
Rob

Similar Messages

Problems with ACR

Hi all,
Having a problem with ACR on the photoshop trial.
I'm hitting CMD + Option + 0 to go to 100% and it is doing so, but it is also going to the next picture at the same time. I then have to go back to the previous which is then at 100% as I asked but it has taken me a gazillion seconds to do it. On windows it was much simpler - how do I solve the problem?
Thanks,
Fred

Hudechrome wrote:
I suspect the two are related.
Highly doubtful...in the case of the BSOD, you have a hardware problem somewhere. Could be processor, memory, motherboard or other devices such as video card or driver but software should not be able to bring hardware down like that.
In terms of the DNG profiles, odds are when you rebuilt you didn't re-install the profiles (they were bundled with the DNG Converter). Download DNG Converter 5.6 and run the install.

Problems with ADF auto submit.

Hi,
I am new to ADF application development and I face an issue while working with the auto submit attribute.Please help me if I am doing anything wrong. The scenario is as follows....
I have a adf table where columns values needs to be entered by the user thorough LOV, inputtext box and checkboxes. For the sake off validation to occur while typing manually in the lov fields we have included auto submit in LOV field. We have set auto submit to true to other fields also to set the values as in while we change it since it was refreshing the values to it previous state/empty when the LOV field get loaded.
Now the problem is that when I change value in a text field and without shifting the focus (the auto submit is not triggered yet), I click the check box (now auto submit is triggered for the input text box) to deselect/select. What happens is that the checkbox gets refreshed back to it previous state (since the change event for the input box is in progress when I clicked the checkbox).
What I do have in my code when I debug is the getter setter methods in the viewRowImpl class for that table view object is called 5-6 times before it renders the page. I tried to figure it out by understanding the phases in the life cycle but I couldnt get it right......
I like to add that i didnt implement any value change listener thinking it will increase complexity. Correct me if I am wrong.....
So pls help me with these .
1. how to make the checkbox persist even if I change it before the change event autoSubmit process is in progress for other fields.
2. Why is the getter methods called 5-6 time before it get the page rendered ?.
3. Is it a mistake I did implement the valueChangeListener to set the values.
4. Finally is there any alternate way to implement the above scenario more efficiently.
thank you.....

Hi subu,
I am sorry that have not got it right.... let me explain in with an example code.
<af:table value="............"
var="row"
rows="..........."
selectedRowKeys="........................."
selectionListener="........................."
rowSelection="single" id="t1" styleClass="SimpleTable"
contentDelivery="immediate"
columnSelection="none"
disableColumnReordering="true"
horizontalGridVisible="false"
verticalGridVisible="false" dontPersist="ALL"
partialTriggers="........................."
autoHeightRows="5"
binding=".........................">
<af:column headerText="..............................." id="c6" width="45">
<af:inputListOfValues id="bankTypeId" value="......" required="......" columns="...." autoSubmit="true">
<f:validator binding="..............................."/>
</af:inputListOfValues>
</af:column>
<af:column sortProperty="....," sortable="false" id="c3" width="75">
<af:inputText value="....." required="....." autoSubmit="true" id="it23" >
<f:validator binding="...."/>
</af:inputText>
</af:column>
<af:column sortProperty="PayableByBacs" sortable="false" headerText="......." id="c7" width="60" align="center">
<af:selectBooleanCheckbox value="...." autoSubmit="true" id="sbc2"/>
</af:column>
</af:table>
Now the when I change value in 'bankTypeId' (LOV) the other pre-entered values gets refreshed even though they have no partial trigger. So I have included the autosubmit to the checkbox and text field too.....
Now the value stays when I change the LOV field value. But When I enter a new value in the text field (it23) and without shifting the focus I change the selectBooleanCheckbox value. It load for a second and the value gets changed to previous value.
I think now I made myself little bit more clearer.... Pls do tell if there needs any more clarity.
Thank you.......

I just bought my iphone 4s and i am having problem with the message tone,it hangs before finishing the tone hangs and then finishes,its irritating

i have a problem in my message tone,may be a bug,it hangs and plays itself please help

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Problem with ACR 4.2 in Bridge

After updating to ACR 4.2, I can no longer open RAW (or DNG) files in
Bridge. The files always open in Photoshop. Could I have done something
wrong?

Thanks for the help. I was the cache. I tried purging from "Edit -> Camera Raw Preferences...", and that didn't fix it. Then, I tried deleting the files manually (I must have missed some), and that didn't work. Finally, I purged from "Edit -> Preferences -> Cache" and everything works! Thanks again! - Jeff <[email protected]> wrote in message news:[email protected].. > Jeff > > You should read the part about ACR install on Windows, I Use Mac and can't > tell you where to put it but it is a very critical install, Not difficult > but you have the follow the instructions carefully and then it will work. > > Bridge 2 has a different cache management with it's own problems, there > are many treads about that in the Bridge forum. However, it does work! > > You should go to the Bridge preferences and check the box with > "Automatically Export Caches to Folder When Possible." > > Remember that the files are by default invisible, in the menu go to View > and select "show hidden files". If your cache is written to the folder > there should be 2 files (blank paper with above right corner folded) and > named: > .BridgeCache and > .BridgeCacheT

A problem with ACR in Photoshop CS 6 (Mac).

When using "Edit in Photoshop CS6" from Lightroom 4 I just go into Photoshop CS6, not Adobe Camera Raw (ACR). Cannot access ACR directly from withion Photoshop either. It works from Bridge tho'. Have checked out many forums and see other people with this problem, but main help responses, to remove com.adobe.Photoshop.plist from Library/Preferences, or reinstalling Photoshop and Lightroom, do not resolve it for me. All software, including Camera Raw (7.2.0.46) is up to date. Use 16 GB iMac and OS X 10.8.2.
Any help much appreciated.
Peter

Peter Sanderson wrote:
Until a few days ago, when working in Lighroom 4, when I clicked "edit in photoshop", it always opened in Camera RAW, which I found useful. Now it just opens in Photoshop. I cannot figure out why this is happening. [...]
Suspect from my readings on further forums, that the previous mode of opening in Camera Raw may have been a bug, which I had assumed to be the norm!!
Yep, sounds like there was a bug and now you're seeing correct behaviour.
Something that might be useful to you is Lr's "Edit In > Open as Smart Object in Photoshop". That'll open a document in Ps with a SO containing a duplicate of a file. Double-clicking that SO will open its contained file in Camera Raw.

Problem with Iphone SMS tone.

I'm using Iphone 4 white. I have already update the software to IOS5
But i cannot set my own sms tone on iphone. What is the problem?
(My Dad is using same model as me but there's no problem, even my aunty using Iphone 3 with update ver of IOS5 is fine.)
Pls Help!

Continue with my problem...
It not actually not working but when i sync on itunes, i can't even see the ringtone in my phone...

Problem with Versions/Auto Save

Something is awfully wrong with Versions on my system. To note, this happened AFTER the 10.7.1 update, but I can't say whether it happened DIRECTLY after the update.
I've already repaired disk permissions using the Recovery Disk.
Here's the problem: on some files (locked or unlocked, by the way) when viewing older versions it doesn't show any preview of the file on the right side -- it's just empty space! When attempting to restore the file it gives the error:
"Unable to revert because an error occurred while trying to open this file's backup version."
Other files would take an eternity to restore -- or even to simply VIEW back versions. It'll give me the spinning beachball of death and after a force quit, the file would be hopelessly corrupted, giving me the error:
"The document xxxxx could not be read. The document does not have a valid format."
Christ.
Even newly-created files sare displaying this problem. I created one just now and it gets stuck on "Retrieving Backup versions from TIME MACHINE"
TIME MACHINE???? I don't USE it! WHERE and WHO gave TM authority to run 'in the background'? That said -- why is it acting funny just NOW? I've turned it off from the beginning and never touched it since. NOW it decides the wreak havoc on my system?
Anyone else having these problems??

Hi Tobias,
Can u just tell us how did u find ur solution..
Thanks & Regards
Sankalp

[Solved] Problems with net-auto-wired, no interent after install

*Background*
I am returning to Arch Linux after being away for about a year. I have finally had a chance to install Arch on my new laptop. Since I am new to systemd and the new installation process I followed the beginners guide very closely.
*Description of the Steps I followed and the Error I encountered*
When I came the the "Configure the Network" Portion of the Beginners' Guide, I chose to follow the net-auto-wired setup. This was partly because I found the warning to be confusing and could not understand why the Guide included a command that "won't work". Additionally I the "net-auto-wired" method seemed given the language of the Guide to be the superior alternative. So I followed the following steps:
# pacman -S ifplugd
# cd /etc/network.d
# ln -s examples/ethernet-dhcp .
# systemctl enable net-auto-wired.service
These commands returned no errors, nor did the net-auto-wired daemon fail to initialize on reboot. I simply did not have a connection with the internet, even after confirming that all the wires were securely plugged in.
*Question for the Forum*
I was able to establish a connection with via several means as well I will likely be installing dbus and wicd to manage my internet connections. So my question is less about how to get connected and more (a) how to trouble shoot net-auto-wired and (b) what language and procedures can we change to the Beginners' Guide so that this issue is not encountered by beginners in the future.
*Information I have Uncovered*
When the net-auto-wired daemon failed to establish a connection. I immediately tried running the following command:
# systemctl enable [email protected]
The output of this command (what is following) showed me what the warning was talking about, how it rename the symbolic link to eth0.service and not enp4s0f2.service as it should have.
ln -s '/usr/lib/systemd/system/[email protected]' '/etc/systemd/system/multi-user.target.wants/[email protected]'
I attempted to resolve this issue by creating the symbolic link with the following command
# ln -s /usr/lib/systemd/system/[email protected] /etc/systemd/system/multi-user.target.wants/[email protected]
After reboot, the appropriately started the dhcpcd@ deamon and established an internet connection.
It also hit me that the netcfg profile "ethernet-dhcp" would be pointing to the wrong interface. I edited the profile to interface with the enp4s0f2 not eth0 and was able to establish a connection manually with the following command but net-auto-wired still failed to work.
# netcfg ethernet-dhcp
At this point I checked the status of the of the net-auto-wired daemon with the following command which uncovered what is most certainly the issue.
# systemctl status net-auto-wired
net-auto-wired.service - Provides automatic netcfg wired connection
Loaded: loaded (/usr/lib/systemd/system/net-auto-wired.service; disabled)
Active: active (running) since Thu 2013-01-24 14:47:12 EST; 36s ago
Main PID: 421 (ifplugd)
CGroup: name=systemd:/system/net-auto-wired.service
421 /usr/bin/ifpluged -i eth0 -r /etc/ifplugd/netcfg.action -fIns
Jan 24 14:47:12 ragnarok systemd[1]: Started Provides automatic netcfg wired connection.
Jan 24 14:47:12 ragnarok ifplugd[421]: ifplugd 0.28 initializing.
Jan 24 14:47:12 ragnarok ifplugd[421]: Using interface eth0
Jan 24 14:47:12 ragnarok ifplugd[421]: Initalization complete, link beat not detected.
Obviously the issues with this are it use of eth0 and not enp4s0f2.
I do not know where to go from here but I am curious if the issue of dhcpcd@ misnaming the symlink is some how related to this issue.
Thanks for all your insight and responses.
PS. This is the third time I have written this post. I finally typed it out in a separate text editor and then copied it in. Twice my login has timed out before I could submit and thus when I submitted I was logged out and my post lost. I do not post often with the forums but I was just frustrated to have lost so much effort. Has anyone else encountered this?
Last edited by jash (2013-01-25 17:29:49)

jash wrote:PS. This is the third time I have written this post. I finally typed it out in a separate text editor and then copied it in. Twice my login has timed out before I could submit and thus when I submitted I was logged out and my post lost. I do not post often with the forums but I was just frustrated to have lost so much effort. Has anyone else encountered this?
Yes, it seems that after a period of inactivity (5 minutes ?) the forum software automatically logs someone out.
After that happened to me for the zillionth time, i installed the firefox addon ReloadEvery .
Now i always open 2 tabs for arch forums : 1 that just shows the index, and has reloadevery enabled with a time of 1 minute.
The 2nd tab is for reading/answering etc.
Haven't been logged out automatically since.

Problem with ACR 7 support of Canon 5D Mark III

Just purchased LR4 with ACR7 (upgrade from LR3.6 - not happy about that either, but I am mostly over it) and tried to import photos from my Canon 5D Mark III. Import feature sees all the .CR2 files but when I try to import them it complains that it does not recognize that file format. Not happy.

Unfortunately two important cameras, the Canon 5D.3 and the Nikon D800, came out during the transition between LR3/4 and PS-CS5/6 so Adobe released beta versions of LR and ACR to help tide people over, but what gets released when is kindof messy during the transition.
A major version release requires debugging and testing so the functionality, including new camera support, must be frozen earlier as compared to mid-version camera-support releases that have minimal coding changes. ACR7-beta functionality was frozen back in February so has even less camera support than ACR6.7 beta, which confused PS-CS6-beta users as well.
Just so you’re aware, there is a bug when doing extreme adjustments in the new toning model and geometric lens-corrections have been applied, so be careful with that in the new LR4.1 RC2. Eric Chan has said the bug will be fixed in the release version of LR 4.1. The same bugs exist in the final ACR 6.7 that came out within the last week, so it is unclear what the status of a bugfix is for PS-CS5 users.
Here is a forum post with more information. Also check out the other threads people refer to with other examples of the bug:
http://forums.adobe.com/message/4380573#4380573

Problems with ACR v8.3 and grayscale

I've upgraded to ACR v8.3. Now when I save from ACR to a jpg, and bring it later into PS CC it is grayscale. If I open it in ACR into PS, it is in colour. Have I inadvertently ticked a box somewhere please? It's happening with all raw files. Thanks

Sounds like the setup in the DVD-player is wrong. Enter the menu in the DVD set-top player, and tell it what kind of TV you are using (4:3/16:9).
Also make sure that you have tagged the tracks in DVDSP correctly. In the Inspector, select 4:3 for the 4:3 track, and 16:9 Letterbox for the 16:9 tracks.
Message was edited by: Olse

Problem with adobe auto-updater

Hi, I have 120 pc Win XP SP3, with Adobe Acrobat reader 9. And about 20 with Adobe Acrobat Pro 9.
Since 2 week, I receive alert from my internet provider. My internet bandwith is overcharg and the head is Adobe updater.
I have to disable all automatic update search for all Adobe Acrobat Reader user.
How can I do this ?
It is a registry key, GPO in active directory ... ?
thanks for your help ...
Steve

Hi Steve,
I assume you mean that you are using Adobe Acrobat 9.2.0 / Adobe Reader 9.2.0 or onwards.
You can disable the automatic update feature for Adobe Reader and Acrobat by setting the following registry key:
1. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Adobe\Adobe ARM\1.0\ARM.
2. Set the value of iCheck as 0(Corresponds to Manual. Do not download or install updates automatically.)
(Further information about the other modes can be gathered from: http://kb2.adobe.com/cps/837/cpsid_83709/attachments/Acrobat_Reader_Updater.pdf)
Maybe you can write a small startup script for the setting the registry and push it across your network of client systems. Or you can even use Adobe Customization Wizard to create a transform for the same, and deploy it across your network and achieve the desired result.
Hope this helps.

Does anyone else have a problem with their text tone 'glitching' after updating to iOS 5?

Since updating to iOS 5, my text tone 'glitches' whenever i recieve a message. By glictching, I mean that it sounds doubled or sometimes it plays, stops then plays again very quickly. I've tried resetting the phone, this works for a few messages then starts again :/ Any suggestions on how to fix this would be much appreciated.
Many thanks

It would be nice to get this issue fix. I didn't notice it until today. The text tone is very sporatic, or delayed, alerts me twice, and it's just not what it used to be like. C'mon Apple - fix the glitches, please.

Random problem with no ring tone or message alert.

I have a one week old iPhone 6 with iOS 8.1.2. Sometimes calls and messages produce no sound. In the case of calls, they kick over to voice mail after just one ring. This situation is intermittent only. After missing a few calls or messages, everything turns back to normal for a while. Then it comes back.

Use Do Not Disturb on your iPhone, iPad, or iPod touch - Apple Support

Problems with ant auto-loading the base Oracle Weblogic Libraries

I'm trying to perform an ant build of a Portal Project, and I get errors trying to compile the files from classes that are part of the Oracle WebLogic Portal Server and WebLogic System Libraries. I've tried adding the two list of jars as pathelements in an ant classpath object, but the javac isn't picking up the jars properly. I feel like there should be a script or be able to call a preconfigured version of ant for this.
I'm using an external version of ant, but using the jdk160_05 from WebLogic.
In the javac I get initial errors of things like:
[javac] /vobs/.../Portal/src/Controller.java:1: package javax.servlet.http does not exist
[javac] import javax.servlet.http.HttpSession;
[javac] ^
[javac] /vobs/.../Portal/src/Controller.java:2: package org.apache.beehive.netui.pageflow does not exist
[javac] import org.apache.beehive.netui.pageflow.PageFlowController;

not very likely. run ant with the verbose and debug flags and see what gets printed out for classpath etc (these classes are in server/lib/api.jar i think) , no special characters in your paths right?

Problem with ACR 7 auto tone?

Similar Messages

Maybe you are looking for