Problem with ACS 4.1 using certificate

I have an ACS 4.1 appliance, I have already configured ACS in order to work with certificate. I got the certificate from ACS, I already installed it as the installation guide says . Additionally I configured the card's controller in my PC in order to manage certificate.
Whe I try to be validated from ACS I can not go on because a message appears and says " click to select a certificate " , after click a windows appears asking user and password however I expected not receive this window.
The switch's port were configured as follows:
aaa new-model
aaa authentication dot1x default group radius+
dot1x system-auth-control
interface GigabitEthernet1/0/4
switchport mode access
dot1x mac-auth-bypass eap
dot1x pae authenticator
dot1x port-control auto
dot1x timeout quiet-period 15
dot1x timeout tx-period 3
dot1x reauthentication
radius-server host (ip address) auth-port 1645 acct-port 1646
radius-server source-ports 1645-1646
radius-server key password
What am I doing wrong or there is something left???

1) Did you install the Certificate file in the local machine? (Right click >> Install Certificate >> And so on..)
2) Are you using the built-in Dot1x supplication in WIndows XP? Is the setting to MD5?
3) Did you Selected this installed certificate from the drop-down Menu in the wireless software?
Regards
Farrukh

Similar Messages

Authentication Problem with ACS 5.2 Using LDAP

HI!
I want to use LDAP for connecting to active directory but I get this Error from ACS 5.2 ( 22056 subject not found in the applicable identity stores).Is there anyone who can HELP me?
I used this configuration in ACS 5.2:
Users and Identity Stores / External identity store / ldap / Directory Organization
Subject ObjectClass : User
Subject Name attribute ; sAMAccountName
Group ObjectClass : Group
Group Map Attribute : MemberOf

Two questions:
- did you press "Test Bind to Server" from LDAP "Server Connection" tab and "Test Configuration" from "Directory Organization" tab?
- did you select the LDAP database as the result in the identity policy?

Exchange 2010/Outlook 2010 Security Alert (...there is a problem with the site's security certificate.)

I've been looking to resolve this issue for a while now and was hoping someone could help me understand my options.
We have Exchange 2010 & Outlook 2010 in our environment. I've created a SSL cert for our ActiveSync from a reputable CA and unfortunately, as you may not be surprised, we are seeing an alert each time we open Outlook that states:
"Security Alert; Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the site's security certificate.
The name on the security certificate is invalid or does not match the name of the site."
Of course my internal server name does not match my external server name. So the SSL I had created for use with OWA and ActiveSync is rejected by my internal Outlook clients.
After doing some research I believe this is related to the Autodiscover service being configured with my internal server name and not my external name.
I've found some info about adding New-AutodiscoverVirtualDirectory and Set-ClientAccessServer commands and then found this article that might help. (Configure
Outlook Anywhere to Use Multiple SSL Certificates) but nothing is specific to my configuration and I'm concerned about what will happen to my existing configuration if this fails.
What happens when you run Set-ClientAccessServer? Does it retain and keep the old server config in place and add a new one or does it wipe it out? Will all of my devices need to be reconfigured?
Same with New-AutodiscoverVirtualDirectory. Does this simply add another virtual directory or is it going to overwrite my existing config?
Then there is the question of whether or not any of this will actually address my issue at all.
absolutezero273c

Sorry.
"[PS] C:\Windows\system32>Set-ClientAccessServer -Identity MailExt -AutoDiscoverServiceInternalUri "https://MailExt
.contoso.com/autodiscover/autodiscover.xml"
The operation couldn't be performed because object 'MailExt' couldn't be found on 'DomainController2.contoso.local'.
+ CategoryInfo : NotSpecified: (0:Int32) [Set-ClientAccessServer], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : 4D980455,Microsoft.Exchange.Management.SystemConfigurationTasks.SetClientAccessServer"...is the error I get.
I've created the split zones and populated the Forward Lookup Zones as follows:
CONTOSO.COM
MailExt(CNAME)MailInt.contoso.local
_tcp _autodiscover(SRV)MailExt.contoso.com
CONTOSO.LOCAL
MailInt(A)192.168.1.10
MailExt(CNAME)MailInt.contoso.com
One thing I did notice is that there isn't a _tcp _autodiscover entry for MailInt in my Forward Lookup Zones. It was recommended that I make that entry for _tcp _autodiscover(SRV)MailExt.contoso.com in another post I read somewhere.
I believe what I am trying to do is create a new autodiscover object as is shown here:
I see there is a Get-ClientAccessServer & Set-ClientAccessServer command but I need to add a CAS. Does the Set-ClientAccessServer add or simply modify?
Or would that require the New-AutodiscoverVirtualDirectory command? I read
this page that discussed creating new virtual directories but that seemed a little risky without knowing all the ins and outs of how this service functions and to what degree this would affect the existing configuration.
I was able to use the Set-ClientAccessServer command and change the actual internal autodiscoverUri to https://MailExt.contoso.com/autodiscover/autodiscover.xml but the name still says MailInt and I continue to get the SSL cert warnings because it is looking
at MailInt.contoso.local.
absolutezero273c

EA4500: There is a problem with this website's security certificate.

When I navigate to router's webpage, I get message that "There is a problem with this website's security certificate."
I am using https.
Does this mean that https is not working on the EA4500?
Solved!
Go to Solution.

wanderers wrote:
ScarletJamie wrote:
wanderers wrote:
When I navigate to router's webpage, I get message that "There is a problem with this website's security certificate."
I am using https.
Does this mean that https is not working on the EA4500?
This problem occurs if the client computer's clock is set so that the date/time is later than the expiry date of the web server's SSL certificate.
Why would the certificate of a brand new router be expired?
Hello, you can check the link posted by sabretooth.

There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server

Hello,
I have an issue with connecting client SB1H on Windows, the scenario is as follows:
1.- Server:
     Suse Linux Enterprise Server 11.3 kernel version: 3.0.76-0.11 IBM
     NDB and Server are review 69 SP06
2.- Client:
     Windows 8 Pro Virtual Machine on Microsoft Hyper-V
     SB1H PL 11 version 32bits
     SAP HANA Studio version 1.0.60
When I run SB1H the following message appears:
There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server.
Any idea what could be the solution?

Hi,
Please check SAP notes:
   1993392 - Server components setup wizard: New default values for certificates and single sign-on option
1929288 - Do not configure SSL for XApp during installation or upgrade if XApp is installed on a different machine than the SAP HANA server
Thanks & Regards,
Nagarajan

TS3899 With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this pro

With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.

Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.

Problems with a shared calendar using Outlook 2007 and Exchange 2010

Hello all,
We are having a problem with sharing a calendar using Outlook 2007 and Exchange 2010.
I will start with some background. I have just started my position with this company. I have been working with networks for awhile at the small business level. I have not had much production experience with exchange. There is only myself and my supervisor
who has inherited a midsized network which was built by five previous techs that are no longer with the company. Of course, the previous techs did not leave much documentation, so the original hows and whys for our system setup has been lost.
One of the managers has a calendar she shares with some of our users. I believe this calendar has been in use since sometime in 2006. A mailbox was created to hold this calendar to keep it separate from the managers calendar. I am not sure what version
of exchange they were using at that time, but I assume there was one or two migrations of it getting to its current state on our exchange 2010 server. At some point it was observed that the other workers she was sharing with were not able to access it correctly.
I am not fully sure what the original problem was (possibly some people not being able to see or connect to the calendar), but it was decided to give everyone who needed access to this calendar full access permissions through exchange. Correct me if I
am wrong, but I believe that gave everyone connected the ability to do anything with the calendar. Of course the manager was not happy about that. This is where I started working on the problem.
I removed everyone, except the manager who wants to control the calendar, from having "Full Access Permissions". This did have the effect of making some people just able to see the calendar and not make changes. Though there were others that were
able to connect to the calendar who I thought would not be able to. The manager that originally created the calendar did try to manage access to it through the Outlook interface, though it currently does not seem to be fully in effect.
So, to get to the point of what we are trying to do, is there a way to get the original manager back into control of the calendar though Outlook? It would be preferred to be able to keep the history of what they tracked of this calendar, so starting a new
one would be something we would rather avoid. After that, getting all of the users that need to connect to the calendar reconnected with the correct access permissions and making sure they are all synchronized.
I realize this is a big mess, and your help would be greatly appreciated.

Hi Nigel,
How is the impact, just one user or all users, Outlook or OWA?
If just one user, it seems like an issue on the Outlook Client side.
Please trying to re-create new profile to fresh the caches.
Please runing Outlook under safe mode to avoid some AVs, add-ins and firewall.
Found a similar thread for your reference:
Calendar Sharing not available error message
http://social.technet.microsoft.com/Forums/exchange/en-US/d9b33281-d7bb-4608-8025-16fb26643d0d/calendar-sharing-not-available-error-message?forum=exchangesvrclientslegacy
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Both xp and windows 7 have video problems with my VGA connection using TV

both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

Problems with a VBA Userform using Multipage (2) and DTPicker.

Hi
Problems with a VBA Userform using Multipage (2) and DTPicker (4)
On Page1 I've got 2 DTPicker, one for the date and the second for the time.
Same thing on Page 2.
Problem:
Only one set will work, if I close the Userform with" MultiPage"on page2, only that set will work.
Same thing if I close on Page 1 then just the set on Page 1 will work.
As anyone seen this problem and any work around you may think would help.
I'm using Windows 7 , Ms Office Pro. 2003
same problem on Windows Vista , XL2003
Cimjet

There are a number of issues relating to the way that date pickers are handled, but the most important is that their output is text. In order to get the values into Excel, you need to format the Excel columns as Date and Custom (time format) and convert
the output to the worksheet from text to date values.
Date pickers also display a few anomalies on multi-page forms, so you need a belt and braces approach. Personally I would put the code to call the form and enter the values in a standard module (as now in the example) and use a belt and braces approach to
maintaining the format.
I think you will find the example now works.
Revised Example
Graham Mayor - Word MVP
www.gmayor.com

Problem with Progress DB while using to connect using JDBC Adapter

Hi,
I am facing Problem with Progress DB while using to connect using JDBC Adapter. I am getting the following error in auditlog file like,
Error during database connection to the database URL jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db using the JDBC driver "com.progress.sql.jdbc.JdbcProgressDriver" : com.sap.aii.adapter.jdbc.sql.DriverManagerException: Unable to locate a suitable JDBC driver to establish a connection to URL " jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db "
I tried using the following all URLs,
1. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.
2. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.db
3.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.
4.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db.
Can anyone please help me out in solving this issue.
May be the cause for this is :
1) The Wrong URL format
2) CLASSPATH is not setted properly..
Can you look more into this stuff.
Thanks,
Soorya.

Hi,
To access any database fromm XI, using the JDBC adapter, the corresponding drivers have to be installed on the XI server.
Just check this note 831162.
Also, check this PDF to install Drivers in XI,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10

Problem with Pole zero analysis using multisim

Problem with Pole zero analysis using multisim
When I tried to find input impedance function's pole zero of a parallel LC network using Multisim
pole zero analysis, I get following message
| | doAnalyses: matrix is singular
| |
| |
| | pz simulation(s) aborted "
The circuit as well as log file attached.
How to correctly perform pole zero analysis?
Solved!
Go to Solution.
Attachments:
Parallel LC.JPG ‏8 KB
parallel LC.txt ‏7 KB

dear sir,
thanks for your earlier reply to my question on pole zero analysis
one more problem on pole zero analysis ;
i tried to do pole zero analysis for circuit(shown in attached file where C1=1/6F(167mF) C2=5/18F(278mF) for which
z(s)= (s^2+9)(s^2+1)
s(s^2+4)
for which zeros are at +/-3j ,+/-1j
poles at 0 ,+/-2j as per theory:
But multisim gives different values (shown in attached file)
what is the problem?
please clarify.
thanks & regards
sagar vanarase
Attachments:
1portLC.JPG ‏219 KB

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
I saved a new workspace and it did not help.
No problem before I went to Maverick.

I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

There is a problem with this website's security certificate.

There is a problem with this website's security certificate.
Error this morning on xxx.emea.acrobat.com

You attempted to reach admin.emea.acrobat.com, but the server presented an expired certificate. No information is available to indicate whether that certificate has been compromised since its expiry. This means that Google Chrome cannot guarantee that you are communicating with admin.emea.acrobat.com and not an attacker. You should not proceed.

There is a problem with this connection's security certificate The remote computer cannot be authenticated due to problems with its security certificate. Security certificate problems might indicate an attempt to fool you or intercept any data you send

Hi,
I have this Windows 2008 R2 on which I installed remoteapp some years ago.
Now the certificate expired and I get the message
"There is a problem with this connection's security certificate
The remote computer cannot be authenticated due to problems with its security certificate.
Security certificate problems might indicate an attempt to fool you or intercept any data you send to the remote computer."
How should I renew the certificate? I already went to certification store and tried to renew certificate with same key but then it says "the request contains nor certificate template information".
Please advise.
J.
J.
Jan Hoedt

Does the computer account have Enroll permission to the certificate template?
From the Server running your CA, run mmc, click File then Add/Remove Snap-in...
Add Certificate Templates and click OK.
Find the certificate template, then right click and select properties. On my CA its call ed RemoteDesktopComputers but might be called something different depending on what what template your certificate is based on.
On the security tab, click Oblect types, check Computers then OK. Enter the Computername and click OK. Then give your computer account Enroll permisssion.
HTH,
JB

Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo?

Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo? It use to work but it no longer lets you place a title over the opening photo.

Is your signature still current?(iPhoto '08, OS X Mountain Lion (10.8.4)) I can confirm this for iPhoto '11; Shatter will only show the text slide title between the slides. Ken Burns and Classic theme can still be set to overlay the caption and title directly over the slides.

Problem with ACS 4.1 using certificate

Similar Messages

Maybe you are looking for