Problem with Adapter Specific Identifiers

Dear All,
I have made all the developments and have migrated them to the PRD server which is my XIP. Now in the XID (DEV server) i had the interfaces connected with the R3 Devlopment (BDS). When i have migrated the Developments of XID to XIP the Business System there is still BDS. My Production server is BPS for R3. I want all the data finally there. Now the problem that i am anticipating is that as the Logical system in the Adapter Specific Identifiers is that of the Development R3 Server as the Developments were done on that basis.
What shuld be done in this case in order I get the data at R3 PRD i.e. my BPS and not the R3 DEV which is my BDS. I also cannot change the Adapter Specific Identifiers as they are not editable.
Initially is was
XIP-->BDS
Now it has to be
XIP-->BPS, but since the adapter specific identifiers are showing the LS of the BDS system therefore the data will be in the DEV server. In case i remove the BDS and Pull the BPS then I have to change all the Interface determination and the receiver agreement and stuff.
Please do advice me. I have also created the BPS in the SLD and the Func Module "LCR_LIST_BUSINESS_SYSTEMS" is showin all the Business systems.
Please do respond ASAP. Thanking in anticipation.
Best Regards
Chakra and Somnath

Hi,
All the scenarios related to BDS to BPS is it ok , then change the technical system details i mean previously the BS is routed to TS of BDS then with same BS name routed to TS of BPS then you need not to change all .that is one.
the second one is
if you have one Fm to retrieve the BS from table then prepare on interface mapping to get the business system details , use this interface mapping name in receiver determination .
See also the below link
Can i know the SP version , if it is SP16 then see the below links
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Regards
Chilla
reward points if it is helpful..

Similar Messages

XI 3.0 SP 20 - Problem with adapter-specific message attributes

Hi everyone,
I am using XI 3.0 SP 20, in SP 17 i read who SOAP adapter and mail adapter have additional adapter-specific message attributes in the message header
But in my XI SP20 dont have that function.
There arent problem in installation of SP20 (no show errors).
Can anybody tell me what is happening? Why dont have "adapter-specific message attributes" ?
Thanks

Hi,
you have to import the SAP XI content, SAP BASIS 6.40 have to be updated. Because the new attributes for adapters are saved in the Adapter Metadata located in the Integration Repository. If you have not update the content, you will not be able to find new options.
Start IR and navigate to the SAP BASIS 6.40, double click on this SWCV and click on the Details tab, you should be able see which Support Package the SAP BASIS has at moment. Update it to SP20 if it is still SP17. You will be able to see the required new attributes in Mail Adapter.
regards,
Hai

Adapter Specific Identifiers

Hello,
We are using a File to XML scenario with BPM (Integration Process); wherein the file is read from a certain directory in our PI box and is written to another directory there. We are working on NW2004s XI(PI). We have created the business system corresponding to our Integration server in ID. The adapter specific identifiers are set automatically. Now, we have defined a business service that takes care of the outbound delivery of the message and the inbound capture of the message. We know that we need to put in the Adapter Specific identifiers in this service, but as this is already configured automatically for the Business system..we can not assign it to the service. Can anyone suggest,what is the way out of this puzzle? I mean, there must be some way whereby the adapter specific identifiers assignment can be overridden.What is it? Any ideas,anyone?
Thanks in anticipation

Hi Udo,
Thanks for the enlightening points. See we have been making a basic mistake. I have awarded you points...but still my question is pertinent as the scenario I described is only half of the story and In practice, we are implementing some File-to-IDoc scenarios; and in that case, Adapter-specific-identifiers are a big deal to handle. Can you throw up some light on that issue? I mean, how to incorporate the adapter-specific-identifiers in the case of XI-to-SAP communication...mapping the xml to IDoc?
Awaiting reply.
Best Regards,
Amitabha

Adapter Specific Identifiers of a business system

I created a business system and a sender RFC adapter under that. RFC destination is working fine now from the R/3 system now. When I go to the business system Adapter specific identifiers the R/3 system ID and Client are coming blank ; tried to compare it with the SLD but still its coming blank. Could some one help me with whats missing in the configuration?
Thanks
Vinod

Hi
Thanks for the reply; the logical system name is coming in the Adapter specific identifiers. Whats missing is the R/3 system Id and client for Idoc and RFC adapter.
Any help would be appreciated.
Thanks
Vinod

Adapter Specific Identifiers of business system

HI All,
I want to add Logical System Name in Adapter Specific Indentifiers for a business System. I am confused how to do it.. when i go to Service>Adapter Specific Identifiers> the "Logical System" field is completely greyed out i cannot type anything there..i even clicked on the "Compare with SLD" button but couldnt add anything there..Please suggest how to add the value for the Field Logical system Name.
Regards,
Raj

Hi Sitaram,
u can set the logical name in ID as well as in SLD also... check how here
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
regards
biplab
Use a Good Subject Line, One Question Per Posting - Award Points

Read the Adapter-Specific Identifiers of a Business Service in mapping step

Hi,
Is it possible to get the values specified in "Adapter-Specific Identifiers" of a Business Service / Business System in the Integration Directory, to be used in the mapping step - and how?
My idea was to access the information via a user definded function in a messages-mapping.
I know the IDOC receiver adapter reads the value for "Logical System" when creating the EDI_DC40 record, but this is done in the Call Adaper step after the mapping step and therefore not available in the message SOAP Header (IDocOutbound not created yet I guess).
Can anyone help?
Thanks
Best Regards
Christian

Hi Christian,
In Java Mapping, we have some constants using which we can achieve this.
Refer the below link:
[http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/frameset.htm]
Regards
Bhanu
Intelligroup.

Adapter Specific Identifier

Hi All,
Previously i assumed the logical system as PABC, so i provided this in the SLD and click on the Adapter Specific Identifier to synchronize the logical system name , but now the logical system name is changed to some only ABC and the same is again provided in the SLD, But if now i am clicking on Adapter Specific Identifier to change the logical system name it is not at all reflecting ,
This is not getting saved. Is it like we can only check this for a single time. If we can do this for multiple time then why not it is getting saved.
Please let me know how can i change this.
Thanks.
JAy

HI ,
Go thru this
what is the dependencies in SLD.Where does it come ?
have a look at this weblog:
/people/michal.krawczyk2/blog/2005/08/26/xi-are-you-independentfrom-your-dependencies
refer these threads discuss the same
In SLD ...On one product how to create the dependencies software components
Usuage Dependency
How to configure SC dependencies in SLD (while creating DCs)
http://help.sap.com/saphelp_nw2004s/helpdata/en/c0/2a6a09e6b9e54aace2adf40260337e/frameset.htm
Try this
1.Goto integration builder and goto "Tools" -->Cache notifications.
If you see anything in red try to refresh the cache for that item.
2. Also in SXI_CACHE txn goto menu bar and "START Complete Cache Refresh in Background" and "Delta Cache Refresh".
this should take care of this.
CPA Cache: Have you defined a user for this? there should be xidiruser to do this.
look at this pdf also
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Do CPA cache full refresh and then try SXI_CACHE.
Better to follow this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34
regards
sasi
Reward if useful
sxi_cache & clear sld cache

IDOC --- XI..."Adapter Specific Identifiers "

while sending an IDOC from R/3 to XI ...what changes do i need to do in Integration directoy.........................
where do i need to specify "Adapter Specific Identifiers ".....?

hi bhavesh ...........thanks
i have IDOC ->XI-> file scenario......
IDOC is from a R/3...i have doen the following configuration in the sender syste:
 SM59 : Create a RFC destination to XI
 WE21 : Create a TRFC Port ->Specify the RFC Destination Created
 BD54 : Create a Logical System for the Idoc Receiver
 WE20 : Create Partner Profile ->Maintain Outbound and the Inbound Parameters
and the following configuration in the XI :
 SM59 : RFC Destination for Sender System
 IDX1 : Create the port to get Idoc Metadata from Sender System ( The Port Name must match the port name in the idoc header - Usually in format SAP<System ID>. eg. SAPID1
 IDX2 : Maintain the Idoc Metadata
and in the SLD i did:
 Create Technical System: Choose WEB AS ABAP if the system is R/3 -> Define SAP SID, Installation Number and Database Host Name a Maintain message Server Details according to Sender System -> Maintain Client Details of Sender System ->Select a Installed Product for Sender System
 Create Business System: Choose WEB AS ABAP if the system is R/3 -> Choose the Technical System and the client Created Before -> Choose the Installed Product -> Set:
o Business System Role: Application System
o Related Integration Server: Integration Server
NOW do i need to any configuration in ID.......anything like ..."Adapter Specific Identifiers "??????????????????????????????????

Problem with language specific characters on e-mail sending

Hi,
Problem with language specific characters on e-mail sending.
How can it be fixed?
Thanks.

Hi,
try to work on the charecter code set UTF-8 or UTF-16. You can define this in html.
Or encode the charecter using java script.
Hope this may help you.
Deepak!!!

Adapter Specific Identifier error

Hi,
I am not able to see the logical system name in Adapter specfic identifier for my business system.
http://rapidshare.com/files/71687434/Error.JPG.html
please find the attached link for error.
Regards,
Nithiyanandam

Hi,
Have u defined logical system for the sender system?? If so it has to highlight when u compare sld content in adapter specific attributes.So try to perform sld cache refresh and check out.
If u have not defined LS then, go to transaction bd54 and define a logical sytem for the sender client. Save your entries and do a sld cache refresh. Now you should be able to see logical system name for sap system in SLD. Once this is done, go to adapter specific attributes and Click on the button "Comapre with SLD" and you should get the LS name and choose that, save and activate your changes.
Regards,
Prasanthi.

Problem with adapter

hello
running a sync service and recieve this error.
couldnt determine if this is XI problem or WS.
if it is XI, how can I debug it?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.xip.mgnt154</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>

Hi,
This merely problem with cache. It is saying XI engine is not able identify the adapter engine URL.
please do this.
You can view the cache data in
transaction SXI_CACHE. To do this,
select Go to &#56256;&#56518; Adapter Engine
Cache.
You can delete the cache data in
transaction SXI_CACHE. To do this,
select Go to &#56256;&#56518; Adapter Engine
Cache. Then choose the recycle bin
push button ( ).
Thanks,
Gujjeti

CSM problem with Adapter Teaming

Hi,
A CSM has been configured with a TCL scripted keepalive to retrieve a dynamic page from each server in the serverfarm. The script reads the data returned by the server and detects a specific string in the page.
The servers are dual-attached with two Broadcom NetXtreme Gigabit adatpers, configured with BASP Teaming (Smart load balancing with failover). This mode of operation allows outbound and inbound load balancing. Each adapter has its own MAC address.
Symptom :
We observe that the servers status swing between OPERATIONAL and PROBE_FAILED at random intervals. We suspect that the problem comes from the adapter teaming mode of operation. We see the CSM ARP table swinging between the two adapter MAC addresses for a specific IP address. I conclude that the CSM updates its ARP table for unicast packets as well.
When the ARP table points to the primary interface, the server status is OPERATIONAL, when the CSM ARP table points to the second adapter, the server status go to PROBE_FAILED.
Is is a know issue ? Is the CSM incompatble with adapter teaming ? We also have CSS devices probing the same servers at the same time, but without problems
Thank you for any advice
Yves Haemmerli

It is not a CSM trouble but more a teaming trouble.
If you connect trought the console management instead of telnet you may see message like this one:
xdxh: %CSM_SLB-6-RSERVERSTATE: Module x server state changed: SLB-NETMGT: Got different MAC address from server x.x.x.x in response to ARP
If you have that kind of message it meens that the server is using both interfaces for the same IP address.
If it is the case you should have a look to your teaming configuration.

Importing Problem with one specific CD

I have previously imported this disc. It is disc 2 of a 2 disc set. I have no problem getting iTunes to recognize the other disc in the set. Now after clearing all previous info and files related to this CD I cannot get iTunes to import it. The iTunes program itself frezes whenever I insert this disc. The rest of my programs are not affected.
I have tried all of the obvious possibilties contained in the iTunes help file as well as the possible settings changes that affect importing CD's.
The program stays frozen until I restart my computer.
I am storing my music files in an external drive. That has presented no problem for this specific disc on a previous import and has not caused any trouble for the other disc copied. However once this freeze occurs and I restart my computer the primary library settings are changed from external drive storage back to the C drive storage.
Weird huh?? Anyone have a similar experience??

I have been able to play the CD in all the other players around the house including the media player in my older computer(ME / OS.) The OS CD player in the computer I use for my iTunes library recognizes the disk as well. iTunes previously imported this disk at least twice. I removed those copies and re-entered the disk a third time. The reason for the multiple entries was info mistakes and a few glitches learning how to set up the external storage.
There is nothing wrong with the disk, it is not a burned disk and has not been exposed to anything that would alter the info on it.
The problem is iTunes software related, perhaps the previous files are still lurking somewhere that I'm unable to access and this prevents the disk from being copied yet again.

Facing Problem with Adaptive Web Service Model

Hi All,
I am consuming adaptive web servcie model. It is created from a lcoal web service i.e deployes on a web service. When i run from WS navigator it works fine.
When i consume WDJ it is erroring out. The method is written an array of bean methods.
The error i am getting is -- java.lang.IllegalArgumentException: Target role name 'Response' not defined for model class 'SearchInvoiceByNumberResponse'
Please help me, have a very tight delivery....
Thanks
Supriya

Hi All,
I did re-imported my model but no help. There are 5 business methods in my EJB. three methods returns integer value and other two methods are selecting the data which returns bean type. One is bean type and another is of bean array type.....
I have problem with only these two...........................these two methods errors out when try to consume through adaptive web servcie model....are there any pre-requsisties i should take care offf.....
Help me out................
Thanks
Supriya.

Problem with Adaptive Web Service model

Hi All,
I am trying to create a model using Adaptive Webservice.
While I am deploying the application I am getting the following warning message.
I cheked the web serivice throw WSNavigator, It is working properlty.Nov 27, 2008 3:34:56 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] WARNING:
[040]Deployment finished with warning
Settings
SDM host : infpu05445
SDM port : 50118
URL to deploy : file:/C:/DOCUME1/286355/LOCALS1/Temp/temp62998testw.ear
Result
=> deployed with warning : file:/C:/DOCUME1/286355/LOCALS1/Temp/temp62998testw.ear
Finished with warnings: development component 'testw'/'local'/'LOKAL'/'0.2008.11.27.15.34.48':
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application local/testw and wait. Reason: Clusterwide exception: server ID 12403050:com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application ''local/testw'' for startup. Reason=Clusterwide exception: Failed to start dependent library ''tc/wd/wslib'' of application ''local/testw''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
     at com.sap.engine.services.webdynpro.WebDynproContainer.prepareStart(WebDynproContainer.java:1490)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:231)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:179)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:301)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:317)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:111)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:227)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4684)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4589)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4562)
     at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : Got problems during deployment
Can you all please let me know is the problem with model creatuion or Web Service configuration.
Thanks,
Archana.

It seams that the component 'tc/wd/wslib' is not well deployed on your server. You should redeploy it on your server.
-Go to nwds, Development infrastructure perspective
-Expand the FRAMEWORK item, there is the 'tc/wd/wslib' normally
Deploy :
-Open the menu Window > Show view > Other and open the Undeploy View
-In the undeploy view expand the FRAMWORK item and locate the tcwdwslib (it ther is no such application, then go directly to deploy steps after)
-Add the to the undeploy list (+ button)
-Click undeploy (blue button near + button
When it is undeployed, you can redploy it:
-In the Componenet Browser, locate the 'tc/wd/wslib' in the FRAMWORK as befor
-Right-click and click Deploy and click OK
If it not working, try the same (undeploy/dredploy) with 'tc/wd/wslib/api'
Check also that the dependencies of your project should have 'tc/wd/wslib/api' and not tc/wd/wslib/
Hope it will help you
Quentin

Problem with Adapter Specific Identifiers

Similar Messages

Maybe you are looking for