Problem with adapter

hello
running a sync service and recieve this error.
couldnt determine if this is XI problem or WS.
if it is XI, how can I debug it?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.xip.mgnt154</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>

Hi,
This merely problem with cache. It is saying XI engine is not able identify the adapter engine URL.
please do this.
You can view the cache data in
transaction SXI_CACHE. To do this,
select Go to &#56256;&#56518; Adapter Engine
Cache.
You can delete the cache data in
transaction SXI_CACHE. To do this,
select Go to &#56256;&#56518; Adapter Engine
Cache. Then choose the recycle bin
push button ( ).
Thanks,
Gujjeti

Similar Messages

CSM problem with Adapter Teaming

Hi,
A CSM has been configured with a TCL scripted keepalive to retrieve a dynamic page from each server in the serverfarm. The script reads the data returned by the server and detects a specific string in the page.
The servers are dual-attached with two Broadcom NetXtreme Gigabit adatpers, configured with BASP Teaming (Smart load balancing with failover). This mode of operation allows outbound and inbound load balancing. Each adapter has its own MAC address.
Symptom :
We observe that the servers status swing between OPERATIONAL and PROBE_FAILED at random intervals. We suspect that the problem comes from the adapter teaming mode of operation. We see the CSM ARP table swinging between the two adapter MAC addresses for a specific IP address. I conclude that the CSM updates its ARP table for unicast packets as well.
When the ARP table points to the primary interface, the server status is OPERATIONAL, when the CSM ARP table points to the second adapter, the server status go to PROBE_FAILED.
Is is a know issue ? Is the CSM incompatble with adapter teaming ? We also have CSS devices probing the same servers at the same time, but without problems
Thank you for any advice
Yves Haemmerli

It is not a CSM trouble but more a teaming trouble.
If you connect trought the console management instead of telnet you may see message like this one:
xdxh: %CSM_SLB-6-RSERVERSTATE: Module x server state changed: SLB-NETMGT: Got different MAC address from server x.x.x.x in response to ARP
If you have that kind of message it meens that the server is using both interfaces for the same IP address.
If it is the case you should have a look to your teaming configuration.

Facing Problem with Adaptive Web Service Model

Hi All,
I am consuming adaptive web servcie model. It is created from a lcoal web service i.e deployes on a web service. When i run from WS navigator it works fine.
When i consume WDJ it is erroring out. The method is written an array of bean methods.
The error i am getting is -- java.lang.IllegalArgumentException: Target role name 'Response' not defined for model class 'SearchInvoiceByNumberResponse'
Please help me, have a very tight delivery....
Thanks
Supriya

Hi All,
I did re-imported my model but no help. There are 5 business methods in my EJB. three methods returns integer value and other two methods are selecting the data which returns bean type. One is bean type and another is of bean array type.....
I have problem with only these two...........................these two methods errors out when try to consume through adaptive web servcie model....are there any pre-requsisties i should take care offf.....
Help me out................
Thanks
Supriya.

Problem with Adaptive Web Service model

Hi All,
I am trying to create a model using Adaptive Webservice.
While I am deploying the application I am getting the following warning message.
I cheked the web serivice throw WSNavigator, It is working properlty.Nov 27, 2008 3:34:56 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] WARNING:
[040]Deployment finished with warning
Settings
SDM host : infpu05445
SDM port : 50118
URL to deploy : file:/C:/DOCUME1/286355/LOCALS1/Temp/temp62998testw.ear
Result
=> deployed with warning : file:/C:/DOCUME1/286355/LOCALS1/Temp/temp62998testw.ear
Finished with warnings: development component 'testw'/'local'/'LOKAL'/'0.2008.11.27.15.34.48':
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application local/testw and wait. Reason: Clusterwide exception: server ID 12403050:com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application ''local/testw'' for startup. Reason=Clusterwide exception: Failed to start dependent library ''tc/wd/wslib'' of application ''local/testw''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
     at com.sap.engine.services.webdynpro.WebDynproContainer.prepareStart(WebDynproContainer.java:1490)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:231)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:179)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:301)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:317)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:111)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:227)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4684)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4589)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4562)
     at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : Got problems during deployment
Can you all please let me know is the problem with model creatuion or Web Service configuration.
Thanks,
Archana.

It seams that the component 'tc/wd/wslib' is not well deployed on your server. You should redeploy it on your server.
-Go to nwds, Development infrastructure perspective
-Expand the FRAMEWORK item, there is the 'tc/wd/wslib' normally
Deploy :
-Open the menu Window > Show view > Other and open the Undeploy View
-In the undeploy view expand the FRAMWORK item and locate the tcwdwslib (it ther is no such application, then go directly to deploy steps after)
-Add the to the undeploy list (+ button)
-Click undeploy (blue button near + button
When it is undeployed, you can redploy it:
-In the Componenet Browser, locate the 'tc/wd/wslib' in the FRAMWORK as befor
-Right-click and click Deploy and click OK
If it not working, try the same (undeploy/dredploy) with 'tc/wd/wslib/api'
Check also that the dependencies of your project should have 'tc/wd/wslib/api' and not tc/wd/wslib/
Hope it will help you
Quentin

Problem with Adaptive RFC Model.

Hi.
I have a problem with creating an Adaptive RFC Model.
When i choose a function from function list, that appears, and click next, the model wizard display log information with following text:
[Warning]: Creating a connection with Metamodel language <en> failed. Continuing with language <ru>
[Fatal]: com.sap.mw.jco.JCO$Exception: Missing R3NAME=... or ASHOST=... in connect_param in RfcOpenEx
[Info]: .................
The SLD server and SLD bridge is running.
How this can be fixed?
Thank you.

Hi
Open SAPLogon. Select the server profile say "Dev" and click on groups. In the window that appears enter the 3 letter id as System id. This you would get when you logon to SAP and see the right hand bottom corner. It would be a 3 letter "XXX". If not ask your basis administrator.
In the Message server space enter the Hostname or ip address (try both in case one of them doesnt work) of your R/3 server. Click on Generate List. You should get some groups appearing in the view below.
If it works then your message server is working fine. Let me know if that helps you.
regards
ravi

Problem with Adapter Framework

Hello All,
Our env. is XI 3.0 and for our development system all the interfaces which are connecting to R3service are getting failed .
And the audit log for one of the interface is shows
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Exception thrown in method process. The transaction is marked for rollback.: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback..
MP: exception caught with cause com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
Can any one help me out to resolve this issue..
Best Regards
Raki

Hello Barry,
Thanks for the update.
The issue has been resolved by applying two more patches of SPS19.
Problem Resolution:
When we apply only one patch Adapter Frame Work Core (SAPXIAFC19P_19-20000272.SCA (Adapter Framework Core 19)), there is chance for some sort of inconsistences in the system and the interfaces relating to Adapter Frame work gets failed from reciever end(R3services).
To avoid such problems (inconsistences) we need to apply the patches which are related to that.And those are .
SAPXIAF19P_9-20000273.SCA Adapter Framework for SP19.
SAPXITOOL19P_10-20000274.SCA) Cumulative Patch tool for SP19
Thanks for all helping me out to resolve the problem earliest.
Best Regards
Raki

JBBD Sender - Problem with Adapter Engine - Message status Delivering -

Hi all,
I've a rare problem. My scenario is JDBC (EO) to IDOC. If the SELECT query from SQL database arrows 8000 lines, the message was sent from PI to R/3 succesfully and Idocs was generated.
But if the query is larger than 10.000 lines, the message was stopped in the sender queue in AE with status "Delivering". In SXMB_MONI I can't see the message, only in RW in Message Monitoring or Component Monitoring in Engine Status.
I've applied note Note 937159 - XI Adapter Engine is stuck, and follow this blog
/people/kenny.scott/blog/2007/08/20/messaging-system-queue-properties-after-xi-30-sp19-xi-70sp11
Using Configtool I modified these parameters (MaxConsumers). But message still puts in sender queue.
I have in PI 7.1 SPs 0004.
Any suggestions??
Edited by: Pablete on Sep 13, 2010 8:41 PM

I have the same requirement and for solving this, I have to apply a very complex select statement.
But it works perfekt for MS SQL:
select * from table where order_no in (SELECT distinct top(1000) order_no FROM table where any_clause) and any_clause order by order_no
update table where invoice_no in (SELECT distinct top(1000) invoice_no FROM table where any_clause) and any_clause
I create an IDoc for each order_no, so I have to make sure, that all lines belonging to one invoice are in the same select.
My select statement has 463 characters

Problem with Adapter Specific Identifiers

Dear All,
I have made all the developments and have migrated them to the PRD server which is my XIP. Now in the XID (DEV server) i had the interfaces connected with the R3 Devlopment (BDS). When i have migrated the Developments of XID to XIP the Business System there is still BDS. My Production server is BPS for R3. I want all the data finally there. Now the problem that i am anticipating is that as the Logical system in the Adapter Specific Identifiers is that of the Development R3 Server as the Developments were done on that basis.
What shuld be done in this case in order I get the data at R3 PRD i.e. my BPS and not the R3 DEV which is my BDS. I also cannot change the Adapter Specific Identifiers as they are not editable.
Initially is was
XIP-->BDS
Now it has to be
XIP-->BPS, but since the adapter specific identifiers are showing the LS of the BDS system therefore the data will be in the DEV server. In case i remove the BDS and Pull the BPS then I have to change all the Interface determination and the receiver agreement and stuff.
Please do advice me. I have also created the BPS in the SLD and the Func Module "LCR_LIST_BUSINESS_SYSTEMS" is showin all the Business systems.
Please do respond ASAP. Thanking in anticipation.
Best Regards
Chakra and Somnath

Hi,
All the scenarios related to BDS to BPS is it ok , then change the technical system details i mean previously the BS is routed to TS of BDS then with same BS name routed to TS of BPS then you need not to change all .that is one.
the second one is
if you have one Fm to retrieve the BS from table then prepare on interface mapping to get the business system details , use this interface mapping name in receiver determination .
See also the below link
Can i know the SP version , if it is SP16 then see the below links
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Regards
Chilla
reward points if it is helpful..

XI 3.0 SP 20 - Problem with adapter-specific message attributes

Hi everyone,
I am using XI 3.0 SP 20, in SP 17 i read who SOAP adapter and mail adapter have additional adapter-specific message attributes in the message header
But in my XI SP20 dont have that function.
There arent problem in installation of SP20 (no show errors).
Can anybody tell me what is happening? Why dont have "adapter-specific message attributes" ?
Thanks

Hi,
you have to import the SAP XI content, SAP BASIS 6.40 have to be updated. Because the new attributes for adapters are saved in the Adapter Metadata located in the Integration Repository. If you have not update the content, you will not be able to find new options.
Start IR and navigate to the SAP BASIS 6.40, double click on this SWCV and click on the Details tab, you should be able see which Support Package the SAP BASIS has at moment. Update it to SP20 if it is still SP17. You will be able to see the required new attributes in Mail Adapter.
regards,
Hai

Problems with Adapter module converting Excel file to XML

Hi All,
I have created an adapter moduel to convert the input excel file to XML and have deployed it. While testing we found that there is an extra empty record with empty elements added additionally. Can anyone help on this?
Below is the convert function used for it.
public byte[] convert(byte src[],String msgType,String nameSpace) throws Exception
 String xmldata = "";
 try
 ByteArrayInputStream byteArr= new ByteArrayInputStream(src);
 Workbook wb = Workbook.getWorkbook(byteArr);
 Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"AO: Conversion Started.");
 xmldata ="<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n\n"+ "<ns0:"+msgType+" "+"xmlns:ns0=\""+nameSpace+"\">";
 Cell[] cells ;
 Cell[] cellNames ;
 cellNames = wb.getSheet(0).getRow(4);
 for(int j=5;j<wb.getSheet(0).getRows();j++)
 xmldata = xmldata+"<Record>";
 cells = wb.getSheet(0).getRow(j);
 for(int i=1;i<wb.getSheet(0).getColumns();i++)
 xmldata = xmldata+"<"+cellNames.getContents().replaceAll(" ","")+">"+cells.getContents()+"</"+cellNames.getContents().replaceAll(" ","")+">";
 xmldata = xmldata+"</Record>";
 xmldata = xmldata + "</ns0:"+msgType+">";
 wb.close();
 catch (Exception e)
 Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"AO: Exception in Convert Method.");
 return xmldata.getBytes();
Regards,
Malini
Edited by: malini balasubramaniam on Mar 5, 2010 7:28 AM

Hi,
xmldata = xmldata+"<Record>";
cells = wb.getSheet(0).getRow(j);
for(int i=1;i<wb.getSheet(0).getColumns();i++)
xmldata = xmldata"<"cellNames.getContents().replaceAll(" ","")">"cells.getContents()"</" ","")">";
xmldata = xmldata+"</Record>";
Can u please change this part of code as
Hi,
cells = wb.getSheet(0).getRow(j);
if(cells.size()>0)
xmldata = xmldata+"<Record>";
for(int i=1;i<wb.getSheet(0).getColumns();i++)
xmldata = xmldata"<"cellNames.getContents().replaceAll(" ","")">"cells.getContents()"</" ","")">";
xmldata = xmldata+"</Record>";
Check first if the row is empty...
im nt sure it is cells.size() or cells.length.. please try both
Thanks & Regards
Babu

Problem with Adaptive Portlets

Hi,
We used the adaptive portlets example and developed a master and details kind of portlets in asp.net. After deploying on portal everything works fine If I run the portlets from the portal server. If I move to a different system to test we are getting the javascript problem saying PTHTTPGETRequest is undefined.
Does any one ran into this problem and any idea.
Thanks,
Ramesh

What are you using to include the necessary javascript (i.e. the PTHTTPGetRequest)? If it's the PTLoader then I expect you don't have any pt xml libraries installed (you'd need to install collab or EDK .NET Web Controls), if you're referencing them directly make sure you have the correct (latest) version and the URL resolves.

RE:Problem with Adaptive Web Service

hi all,
I am trying to create a model using Adaptive webservice Using Local server and NoLogical Destinations and the error iam getting when i have selected my webservice is *ModelClassClash* so plz help me out in solving this issue.

Hi Mahesh
I am also new to webdynpro Java i am giving my own idea i hope it may help to you .Check the dictionary if meta data is there are not ? if it is there model is imported perfectly.
otherwise re import the model.Reply please
Thanks,
Tulasi.P
Edited by: tulasi palnati on Jul 8, 2008 12:33 PM

Problem with adapter SAP for Biztalk

Hello,
I'm sorry for my bad english, I'm french.
I installed the SAP GUI 7.20 adapter for use in BizTalk Editor.
Today, I recovered data from SAP but I get an error message:
Details:"System.Transactions.TransactionException: The operation is not valid for the state of the transaction.
   at System.Transactions.TransactionState.EnlistVolatile(InternalTransaction tx, IEnlistmentNotification enlistmentNotification, EnlistmentOptions enlistmentOptions, Transaction atomicTransaction)
   at System.Transactions.Transaction.EnlistVolatile(IEnlistmentNotification enlistmentNotification, EnlistmentOptions enlistmentOptions)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.TxnBatch2..ctor(IBTTransportProxy transportProxy, ControlledTermination control, Transaction transaction, ManualResetEvent orderedEvent, Boolean makeSuccessCall)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkDeleteTxn.Execute(BizTalkExecutionContext executionContext)".
You should know that this error happens after about 20 minutes (though all are binding timeout to 1 hour). The XML file must be recovered about 50MB to 70MB.
The adapter he has a volume limit ? What can match this error message?
thank you for your response.
Aurelien.

Hello Vandec,
We may not be able to give you a good response to your query since it's not a GUI issue.
The message falls under the Process Integration forum.
Regards,
Jude

Problem with adapter network category reverting to public after change to private

I noticed that after setting up HyperV Server 2012 R2, that after applying needed firewall rules to allow remote management, that these were added into the "Public" profile. So, I disabled them and enabled for Private and proceeded to change the
NIC which is internal to the LAN to Private as well.
All was good; however, after several hours... the network category reverted to Public on that NIC, which of course will not allow any remote management.
The firewall rules for remote management are only enabled for "Private".
I used: Set-NetConnectionProfile -InterfaceIndex # -NetworkCategory Private
Which works; however, what is causing it to revert to public after a given amount of time...

no domain for this HyperV Server 2012 R2, it's workgroup.
The management NIC is set for static IP. At first I did not apply a gateway nor dns settings for it and NLA automatically gave it the Public profile. After setting to Private via powershell, any reboot or after several hours, it would
revert.
So, I set a gateway and dns to a VM that is running on that server which runs those services for other subnets. I am guessing that after a reboot, NLA discovery is not respecting the static properties and changing the profile to public. Perhaps
due to the VM is still spinning up?
I cannot find a way to get NLA to respect the static properties "and" profile for itself.

Minor Problem with MagSafe Power Adapter

I got my MBP almost a year ago now (partially why I'm asking the question) and I've noticed that my power adapter doesn't always show the charge light. Sometimes it is not on at all, and sometimes it is less bright in color (both green and amber).
If I remove it and put it back it usually corrects itself.
It if fully functional; even if the light is completely out and plugged in it still shows as charging.
So, is this normal? I never remember having this sort of problem with my PB G4.

I would think the led light on my adapter cable was broken, but I discovered it works fine on a co-workers MBP. His adapter, which we know works, does NOT work (ie. the led does not come on) when attached to my computer. This indicate to me that the problem, whatever it is, can sometimes be with the computer and not the adapter.
I would be curious if others with apparently dead leds have tried their chargers on other MBPs.
Here's the long version of my story:
My 5W MagSafe completely fried after only 9 months.
The new adapter was fine for several days until this morning.
My "low battery" warning popped up, so so I plugged it in to recharge and immediately noticed the little led on the charger cord did not come on.
I found it hard to believe that I had another bad adapter, so before making the trip back to the store, I went into the studio where there are some other MBP users.
I plugged my adapter into another laptop and the led came on. It appeared to function completely normally. I tried MagSafe adapters from two other MBPs, but the led did not come on on either of them while attached to my computer.
This made me think there was some sort of problem with the connector on the computer itself. Just visually, it appears to be clean and corrosion free.
The next obvious step, it seemed, would have been to try swapping batteries with the other laptops, but mine is a 17" and everyone else here has 15"... and so we have different battery sizes.
One of the people here at the studio had a little utility called "Coconut Battery", that reports information about the battery health. When I ran it on my laptop, I got what I thought were rather surprising results.
It showed the usual things like current charge (21%), battery capacity and so on. But under "Additional Info" it said "Charger connected: Yes" and "Battery is charging: No".
I figured this narrowed it down to a problem with the battery. But as I was showing these results to my co-worker, the "Current Battery Charge" changed from 21 to 22%. Huh? We left it plugged in and it continued to show a steady climb in the charge, as if it is working normally. Except there is no led light, and the software still says it is not charging. Odd.
I then noticed that the built-in battery level indicator on the status bar was also showing the same increases. The led lights on the back of the battery are indicating an increase as well.
Just out of curiosity, I ran a second battery health analyzer program and again got these conflicting results. This one reported the same battery charge and capacity and so on as the previous one. It also recognized that the laptop was running off of AC power, that there was a battery, but it said "Not Chargeable."
So now I am going to let it continue until I have a full charge and then see if the computer will run as usual from the battery.
I don't think the store here is going to give me another adapter since this one appears to work just fine on the other computers.
Any thoughts on why the led would work on other laptops but not mine?
Why the battery health monitors report that the battery is being charged, but also that it is "not chargeable"?

Problem with adapter

Similar Messages

Maybe you are looking for