Problem with "Add new xml schema"

Hi,
When i add a new xml schema to my repository, the Console stop responding.
It happens for all repository. Have any clue why?
I am using MDM SP05 5.5.42.48
Thanks in advance for you help
Best regards,
Arun prabhu S

Hi Arun,
Kindly visit the following links:
[http://help.sap.com/saphelp_mdm550/helpdata/en/42/e9cfa1d2e23ee6e10000000a1553f7/frameset.htm]
[http://help.sap.com/saphelp_mdm550/helpdata/en/fe/8aa2bbdb0d41a0a6b37194ea614f11/frameset.htm]
[http://help.sap.com/saphelp_mdm550/helpdata/en/7a/d536f2aae04747b1f48afbff4834b1/frameset.htm]
Hope it will suffice to hint you.
With warm regards,
Krutarth

Similar Messages

Problem with add new Member in Account Dimension

Hi Expert
I want to add new member in account dimension but occured some Error about a member count of a circular reference. Please help me for solve this error. Thank you so much
Best regards,
Bank

Hi,
This kind of error indicates faulty dimension formulas. There must be at least 2 formulas referencing each other. For example:
1. A=B+C
2. C=A*D
The above 2 formulas are dependent on each other. On one hand, you need C to calculate A. On the other hand, you need A to calculate C. So, causing a cross reference. Try to remove all the dimension formulas in your account dimension and process it. See, if its successful or not. If yes, then the formula was the definite reason. Now, try to add the formula one by one, till you get the error.
Hope this helps.

Is Anyone Having Problems with the newer version of Firefox?

I still have my older Mac OsXv10.4 Tiger software. I wasn't exactly happy with Safari browser as it would block many sites and were considered incompatible so I downloaded the free Firefox browser (the 2.0 version) of which I STILL have. I'm aware that there is a much newer version and would like to download that, but I've heard a lot of people saying they have been having severe problems with it, but then they have PCs and not Macs.
So my question is for you Mac users that use Firefox, have you had major problems with the newer version? I'm real hesitant to download if I'm going to have the same problem PC users are having...like constantly crashing. Also would my old Tiger software be compatible? I don't want to upgrade to Leopard.

Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.

Specifying nested element with two different XML Schema

Hello,
I am trying to convert one xml file to another file. I figure data services would be great for this.
My problem relates to how to have a source xml file with a certain xml schema be transformed to one of a different xml schema. I cannot build the nested elements of the target schema.
From the source xml I only need four fields. But they need to be nested three levels in the target xml.
Source
<DRUG_PRODUCT_LST xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <DRUG_ITEM>
      <DRUG_PRODUCT_ID>113083</DRUG_PRODUCT_ID>
      <DIN_PDIN>2317559</DIN_PDIN>
      <HC_BRAND_NAME>PMS-SILDENAFIL</HC_BRAND_NAME>
      <HC_ATC_CODE>G04BE03</HC_ATC_CODE>
   </DRUG_ITEM>
<DRUG_PRODUCT_LST
Target
<?xml version="1.0" encoding="ISO-8859-1"?>
<CODES>
   <CODE_TYPES>
      <CODE_TYPE>
         <COD_CODE>113083</COD_CODE>
         <COD_DESCR>PMS-SILDENAFIL</COD_DESCR>
         <COD_SOURCE>G04BE03</COD_SOURCE>
         <COD_NPSA>2317559</COD_NPSA>
      </CODE_TYPE>
   </CODE_TYPES>
</CODES>
I have tried using an xml pipline to unnest the source, then use a query transform to re-nest for the target. But I do not know how to specify the input schemas.

Hello,
I am trying to convert one xml file to another file. I figure data services would be great for this.
My problem relates to how to have a source xml file with a certain xml schema be transformed to one of a different xml schema. I cannot build the nested elements of the target schema.
From the source xml I only need four fields. But they need to be nested three levels in the target xml.
Source
<DRUG_PRODUCT_LST xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <DRUG_ITEM>
      <DRUG_PRODUCT_ID>113083</DRUG_PRODUCT_ID>
      <DIN_PDIN>2317559</DIN_PDIN>
      <HC_BRAND_NAME>PMS-SILDENAFIL</HC_BRAND_NAME>
      <HC_ATC_CODE>G04BE03</HC_ATC_CODE>
   </DRUG_ITEM>
<DRUG_PRODUCT_LST
Target
<?xml version="1.0" encoding="ISO-8859-1"?>
<CODES>
   <CODE_TYPES>
      <CODE_TYPE>
         <COD_CODE>113083</COD_CODE>
         <COD_DESCR>PMS-SILDENAFIL</COD_DESCR>
         <COD_SOURCE>G04BE03</COD_SOURCE>
         <COD_NPSA>2317559</COD_NPSA>
      </CODE_TYPE>
   </CODE_TYPES>
</CODES>
I have tried using an xml pipline to unnest the source, then use a query transform to re-nest for the target. But I do not know how to specify the input schemas.

New XML Schema not working

It looks like you currently cannot add a new XML Schema under the XML Database node.

Can you paste the XML Schema that you tried to create to the forum ?
Also, did you try to create a global or a local xml schema ?
thanks,
Chithra

How to add new xml item(BAPI requset)?

Hello
i want to create bom to ERP from mii
how to add new xml item(BAPI requset)?
i use bapi CAD_CREATE_BOM_WITH_SUB_ITEMS
this bapi's format is
<table>
<item>
    <col1>1111</col1>
    <col2>bbbb</col2>
</item>
</table>
i want to add <item>
like this
<table>
<item>
    <col1>1111</col1>
    <col2>bbbb</col2>
</item>
<item>
    <col1>22222</col1>
    <col2>bbbb</col2>
</item>
</table>
how to set trx?
i tryed
SAP_JCo_Interface_0.Request{/CAD_CREATE_BOM_WITH_SUB_ITEMS/TABLES/BOM_ITEM/item[2]/SORTF}
when error occured
use MII12.0
Edited by: Atsushi Iwasaki on May 18, 2010 6:22 AM

Hi,
You can try this alternative
Step 1) Create XML Document with required structure which you want to pass it to BAPI request.
Step 2) Populate the XML Row with required contents and map it to above created XML document
Step 3) Map above created XML Document to BAPI request (use assign XML option dfrom link editor rather tha assign value)
This will help to map dynamic contents to your BAPI request.
Regards,
Shalaka

Some small problems with my new 3G iPhone

Having some small problems with my new iPhone, nothing major, just annoying.
1. When I plug my iPhone in to charge/sync my Adobe photoshop keeps trying to download the photos on my iPhone, which causes an error message from Adobe that it can't download and it stops all syncing and removes my iPhone from iTunes. I have to unplug and reinsert USB cable and sometimes it works ok and sometimes I have to reinsert again. Also when charging, it will disconnect, reconnect and the samething all over again, photoshop trying to get photos and an error message.
2. Can't send e-mails via 3G? Only can get, have to connected to a WiFi to send e-mails, or is this normal?

When your iPhone includes photos in the Camera Roll, it is also detected as a digital camera when connected to your computer, and whichever app you have selected to import photos will automatically launch to import the photos. If you haven't imported these photos, it is a good idea to do so as with any other digital camera. I import the photos followed by deleting the photos from the iPhone after the import process is complete. If I want any of the imported photos available on my iPhone for viewing, I add the photos to an existing album that is selected to be transferred to my iPhone under the Photos tab for my iPhone sync preferences, or add the photos to a new album followed by selecting the album under the Photos tab followed by a sync.
If your iPhone's Camera Roll does not include any photos that have not been imported, Adobe Photoshop should not launch automatically when your iPhone is connected.
I know how to disable the selected application for photo import from launching automatically regardless with a Mac, but not with Windows.
Regarding the sending email problem, who is the email account provider and does the email account provider have an authenticated SMTP server?
Most ISPs block the use of SMTP servers that are outside of their network or not provided by the ISP being used for your internet connection unless the SMTP server is authenticated. When connected to the internet via AT&T's cellular network, it is no different in this regard. AT&T's SMTP server is included and available by default for use with an email account that does not have an authenticated SMTP server when connected to the internet via AT&T's cellular network, but you probably won't be able to use this SMTP server for sending messages with the account when connected to the internet with your ISP via an available wi-fi network - especially if the email account is provided by your ISP.
I access two email accounts with the iPhone's mail client and both accounts have an authenticated SMTP server. I've never had any problems sending with either account regardless the ISP being used for an available wi-fi network, or when connected via AT&T's cellular network.

Problems with Itunes New Version?

Problems with Itunes New Version?
Here is a copy of the error message. Every Time I listen to a song and it end and I go to listen to a new song the Itunes Freeze up. This is on the New Version of Itunes. I have a Windows 7 32bit 3GB Ram 1TB harddrrive Space
<edited by host>
Thanks,
<edited by host>
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 1
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 0
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0

There certainly is a problem with itunes. I downloaded 9.2 and now it won't open. It won't recognize my iphone, either. I uninstalled it in the order recommended by the site, no joy. Deleted a configuration file, no joy. System Restore, no joy. All other software and hardware on the machine is working fine. I call AppleCare AND a local store, either they are completely clueless (which I doubt), or they have no idea how to fix it. I can't even back up my phone, or use the ipod. And since no one at Apple seems to care enough, I'll have to wait until the clamor is loud enough for them to even admit to a problem before I can use the ipod again.

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

Problems with the new Pages.

Hi everyone.
I wonder if i am the only one experiencing a little problem with the new Pages?
My problem is that every other time i want to correct the font lets say trying to underline or make the font fatter using the hotkeys "Command+B" or "Command+U" or "Command+I", or even changing it manually in "formats" my font gets stuck, and i have to copy-paste text from another pages-file into my old one to get et back to normal.
Anyone else tried this?
Martin.

VladRO wrote:
These are the problems that I am encountering for the moment! If there will come up some new once, I will write them here!
Instead of starting a new list, go to
https://discussions.apple.com/thread/5468056?tstart=0

Problems with the new iPad and Joikuspot premium after iOS 6

Hi,
I'm experiencing serious problems with my new iPad after last iOS update. Usually I was connecting to the internet through Joikuspot premium on Nokia mobile phone (E6). I was able to do everything, https sites surfing, absolutely everything with no exceptions.
Now, after iOS 6 update, I can't connect to https sites, google+, sync calendar etc.
I've tried to change connection criteria on joikuspot but nothing. The fact is also that other devices as laptop or other smartphones are still working perfectly, in any case, sharing the wi-fi connection created by joikuspot.
Finally the problem is 100% due to the iPad and the new iOS.
disappointing, amateur for such a device... (iPad I mean).
Any help?
Many many thanks
Vittorio

Ho lo stesso problema, dopo l'aggiornamento a IOS 6 l'ipad non riconosce più il mio nokia N8. Con IOS 5 andava una cannonata...
vorrei ritornare a IOS 5

Problem with the new server UCS C220 for set IP to CIMC

Hi
We’ve a problem with the new server UCS C220.
We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
Note. The dedicated management NIC does not link, the other two ports do make link.
What do you suggest to put an IP to CIMC and start installing our applications?
regards

You may have noticed that there is no DVD rom on the c220. What you need to do is:
Login into the CIMC from your browser
Luanch the KVM
Insert the VMware DVD in your machines drive
On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
After the VMware OS installs press F2 to enter IP.
Browse to the VMware ip to download the Vsphere client
Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
You can now upload OVA templates or manually create virtua machine from this enviroment.
Hope this help

Problems with reports and XML-publisher - No XML

Hi!
I'm having a problem with Apps and XML-publisher. I made a report file, which queries some views. When executing in reports, I get all the data I expect.
Now, when I upload the reportfile to Apps and let it generate XML, my xml-file is empty (well, almost empty)
<?xml version="1.0" ?>

<T03501684>
<LIST_G_PERSOON>
<LIST_G_PERSOON />
</T03501684>
Anyone who can shed any light upon this problem?

OK, finally solved the problem... A good night's sleep always helps ;).
After just trying each queried table one after an other, I found the problem:
The difference between Oracle Apps (Dutch locale) and the reports builder (English) is the language... And our functional people have changed some names, but the Dutch ones, leaving the english names in place and one of the tables I query has language specific data, which is also appears in a where clause.

I am having email problems with the new Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help

I am having email problems with the new Mountain Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help
Incoming Mail (IMAP) Server - requires SSL:
imap.gmail.com
Use SSL: Yes
Port: 993
Outgoing Mail (SMTP) Server - requires TLS:
smtp.gmail.com (use authentication)
Use Authentication: Yes
Use STARTTLS: Yes (some clients call this SSL)
Port: 465 or 587
Account Name:
your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
Email Address:
your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
Password:
your Gmail password
The Quick Answer
Follow the instructions below to set up IMAP1 access in most email clients.
Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option? The next page under ADVANCED: THERE IS A BOX SSL MARKED. Then IMAP Path Prefix - I put stmp.gmail.com.. is that right? Port 993 can use this one? as 456 doesn't work and 587 said it wasn't safe. Under AUTHENTICATION I used PASSWORD. Should I have used external client cert TLS?
Please help me set this up securely. Thanks

Apple - Support - Mail Setup Assistant

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message?

Problem with "Add new xml schema"

Similar Messages

Maybe you are looking for