Problem with Adhoc Query
Hi
I am trying to take out a report on employee's education through Adhoc query. When I am taking the report for all employees it is coming out perfectly. But when I am giving some selection conditions it is showing me blank fields.
Suppose I want see educational details for only one employee having personnel number 1415.
In the selection field of personnel number I am giving 1415 but all the fields related to education is coming blank.
Samriddhi
Please check the conditions you are giving in the selection screen is not matching with the data available
For example Start Date
Employee Group
etc.
make sure you are giving the proper values
Best Regards
Similar Messages
-
Problem in Adhoc Query's set operation functionality.
Hi Experts,
I am facing problem executing Adhoc Query's set operation functionality.
In Selection Tab, following operations are performed :-
Execute a query and mark it as 'Set A'.(Say Hit list = X)
Execute another query and mark it as 'Set B'.(Say Hit list = Y)
In Set operation Tab, following operations are performed :-:-
Carry out an Operations 'Set A minus Set B'.
which results in Resulting Set = Z.
Transfer the resulting set 'in hit list' and press the copy resulting set button.
In Selection Tab, Hit list is populated with Z.
And when output button is pressed, I get to see 'Y' list and not 'Z' list.
Kindly help.
Thanks.
YogeshHi Experts,
I am facing problem executing Adhoc Query's set operation functionality.
In Selection Tab, following operations are performed :-
Execute a query and mark it as 'Set A'.(Say Hit list = X)
Execute another query and mark it as 'Set B'.(Say Hit list = Y)
In Set operation Tab, following operations are performed :-:-
Carry out an Operations 'Set A minus Set B'.
which results in Resulting Set = Z.
Transfer the resulting set 'in hit list' and press the copy resulting set button.
In Selection Tab, Hit list is populated with Z.
And when output button is pressed, I get to see 'Y' list and not 'Z' list.
Kindly help.
Thanks.
Yogesh -
Problem with a query with a BLOB data type
Hi i've a problem with this query in 11g. R1
SELECT
LOGTIMESTAMP,
LOGTIMEMILLIS,
MSGID,
XMLTYPE(MESSAGEBODY, nls_charset_id('AL32UTF8')).getClobVal() as LLamada
FROM
vordel.AUDIT_MESSAGE_PAYLOAD,
vordel.AUDIT_LOG_POINTS
WHERE
AUDIT_LOG_POINTS.LOGPOINTSPK = AUDIT_MESSAGE_PAYLOAD.MP_LOGPOINTSPK AND
LOGTIMESTAMP between TO_TIMESTAMP('03-12-2011 00:00','DD-MM-YYYY HH24:MI') and TO_TIMESTAMP('03-12-2011 12:00','DD-MM-YYYY HH24:MI')
and filtertype = 'LogMessagePayloadFilter'
and filtername like 'Log Llamada%'MESSAGEBODY: data type of the Column is BLOB
throw this error after execute the query
Error:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00200: could not convert from encoding UTF-8 to UCS2
Error at line 1
ORA-06512: at "SYS.XMLTYPE", line 283
ORA-06512: at line 1Could you check the BLOB really contains UTF-8 encoded XML?
What's your database character set?The BLOB contains UTF-8 Encoded
and the database where i am connectes have AL32UTF8 character set, but my internal instance have "AMERICAN_AMERICA.WE8ISO8859P1"
that is a problem?
How could I change the character set of the oracle local client to the character set of the remote oracle data base? -
Problem with Hierarchical query
Gurus,
I have a problem with hierarchical query, which I am pasting below.
select sys_connect_by_path (Fname,'/')"PATH",Fname,id,level
,(SELECT COUNT(ID)-1 FROM (SELECT CONNECT_BY_ROOT LNAME LNAME,ID FROM CMT_PERSON
START WITH ID = 'emplo000000000126009'
CONNECT BY PRIOR ID=MANAGER_ID)
GROUP BY FNAME)"COUNT"
from CMT_PERSON
WHERE
LEVEL <= 4
----And ID='emplo000000000001877'
CONNECT BY PRIOR id=manager_id
----AND NOT LEVEL > 3
START WITH ID='emplo000000000126009'
As per the result, count is getting repeated for all the levels. That is, count is coming 16100 for every level, Can you please help where exactly I am going wrong
RegardsYou do not say anything about what count you want to get?
A wild guess could be:
select
sys_connect_by_path (p1.fname, '/') "PATH",
p1.fname,
p1.id,
level,
(select count (id) - 1
from
(select connect_by_root p2.lname lname, p2.id
from cmt_person p2
start with p2.id = p1.id
connect by prior p2.id = p2.manager_id)
) "COUNT"
from cmt_person p1
where level <= 4
connect by prior p1.id = p1.manager_id
start with p1.id = 'emplo000000000126009';Since your inner query simply starts with the hardcoded employee id, naturally it will give you the same count.
My guess is your inner query should start with the person id from the outer query?
If that is not the case - please state in plain english what you are trying to accomplish ;-)
(Oh, and please paste code within tags so we can read it more easily...) -
Hi,
I have a problem with af:query. Here's what I do:
1. create a VO, define view criteria
2. drag and drop view criteria from data controls to an empty form, choosing query and table
3. When I run the page and click any of the buttons, I get: "Because of inactivity, your session has timed out and is no longer active...."
I see no exceptions in output window. What am I doing wrong?
Here is my view defenition:
<?xml version="1.0" encoding="windows-1250" ?>
<!DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd">
<!---->
<ViewObject
xmlns="http://xmlns.oracle.com/bc4j"
Name="EmployeesView"
Version="11.1.1.49.49"
SelectList="Employees.EMPLOYEE_ID,
Employees.FIRST_NAME,
Employees.LAST_NAME,
Employees.EMAIL,
Employees.PHONE_NUMBER,
Employees.HIRE_DATE,
Employees.JOB_ID,
Employees.SALARY,
Employees.COMMISSION_PCT,
Employees.MANAGER_ID,
Employees.DEPARTMENT_ID"
FromList="EMPLOYEES Employees"
BindingStyle="OracleName"
CustomQuery="false"
PageIterMode="Full"
UseGlueCode="false">
<DesignTime>
<Attr Name="_codeGenFlag2" Value="Access|VarAccess"/>
</DesignTime>
<Variable
Name="firstName"
Kind="viewcriteria"
Type="java.lang.String"
DefaultValue="0"/>
<EntityUsage
Name="Employees"
Entity="project3.Employees"
JoinType="INNER JOIN"/>
<ViewAttribute
Name="EmployeeId"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="EmployeeId"
EntityUsage="Employees"
AliasName="EMPLOYEE_ID"/>
<ViewAttribute
Name="FirstName"
PrecisionRule="true"
EntityAttrName="FirstName"
EntityUsage="Employees"
AliasName="FIRST_NAME"/>
<ViewAttribute
Name="LastName"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="LastName"
EntityUsage="Employees"
AliasName="LAST_NAME"/>
<ViewAttribute
Name="Email"
IsUnique="true"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="Email"
EntityUsage="Employees"
AliasName="EMAIL"/>
<ViewAttribute
Name="PhoneNumber"
PrecisionRule="true"
EntityAttrName="PhoneNumber"
EntityUsage="Employees"
AliasName="PHONE_NUMBER"/>
<ViewAttribute
Name="HireDate"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="HireDate"
EntityUsage="Employees"
AliasName="HIRE_DATE"/>
<ViewAttribute
Name="JobId"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="JobId"
EntityUsage="Employees"
AliasName="JOB_ID"/>
<ViewAttribute
Name="Salary"
PrecisionRule="true"
EntityAttrName="Salary"
EntityUsage="Employees"
AliasName="SALARY"/>
<ViewAttribute
Name="CommissionPct"
PrecisionRule="true"
EntityAttrName="CommissionPct"
EntityUsage="Employees"
AliasName="COMMISSION_PCT"/>
<ViewAttribute
Name="ManagerId"
PrecisionRule="true"
EntityAttrName="ManagerId"
EntityUsage="Employees"
AliasName="MANAGER_ID"/>
<ViewAttribute
Name="DepartmentId"
PrecisionRule="true"
EntityAttrName="DepartmentId"
EntityUsage="Employees"
AliasName="DEPARTMENT_ID"/>
<ViewCriteria
Name="EmployeesViewCriteria"
ViewObjectName="project3.EmployeesView"
Conjunction="AND">
<Properties>
<CustomProperties>
<Property
Name="mode"
Value="Basic"/>
<Property
Name="allowConjunctionOverride"
Value="true"/>
<Property
Name="autoExecute"
Value="false"/>
<Property
Name="showInList"
Value="true"/>
<Property
Name="displayOperators"
Value="InAdvancedMode"/>
</CustomProperties>
</Properties>
<ViewCriteriaRow
Name="vcrow24"
UpperColumns="1">
<ViewCriteriaItem
Name="FirstName"
ViewAttribute="FirstName"
Operator="STARTSWITH"
Conjunction="AND"
UpperColumns="0"
Required="Optional">
<ViewCriteriaItemValue
Name="EmployeesViewCriteria_vcrow24_EmployeeId_vcval0"
Value=":firstName"
IsBindVarValue="true"/>
</ViewCriteriaItem>
</ViewCriteriaRow>
</ViewCriteria>
<ViewLinkAccessor
Name="EmployeesView"
ViewLink="project3.EmpManagerFkLink"
Type="oracle.jbo.RowIterator"
IsUpdateable="false"/>
</ViewObject>
And JSF page:
<af:panelGroupLayout layout="vertical">
<af:panelHeader text="Employees">
<af:query id="employeesViewCriteriaQueryId" headerText="Search"
disclosed="true"
resultComponentId="employeesViewCriteriaQueryResultId"
value="#{bindings.EmployeesViewCriteriaQuery.queryDescriptor}"
model="#{bindings.EmployeesViewCriteriaQuery.queryModel}"
queryListener="#{bindings.EmployeesViewCriteriaQuery.processQuery}"
queryOperationListener="#{bindings.EmployeesViewCriteriaQuery.processQueryOperation}"/>
</af:panelHeader>
<af:table value="#{bindings.EmployeesView1.collectionModel}" var="row"
rows="#{bindings.EmployeesView1.rangeSize}"
emptyText="#{bindings.EmployeesView1.viewable ? 'No rows yet.' : 'Access Denied.'}"
fetchSize="#{bindings.EmployeesView1.rangeSize}"
id="employeesViewCriteriaQueryResultId">
<af:column sortProperty="EmployeeId" sortable="false"
headerText="#{bindings.EmployeesView1.hints.EmployeeId.label}">
<af:outputText value="#{row.EmployeeId}">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.EmployeesView1.hints.EmployeeId.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="FirstName" sortable="false"
headerText="#{bindings.EmployeesView1.hints.FirstName.label}">
<af:outputText value="#{row.FirstName}"/>
</af:column>
<af:column sortProperty="LastName" sortable="false"
headerText="#{bindings.EmployeesView1.hints.LastName.label}">
<af:outputText value="#{row.LastName}"/>
</af:column>
</af:table>
</af:panelGroupLayout>
Regards
Jernej
Message was edited by:
Jernej KaseIt also seems that quick queries don't work with SQL92 sqlBuilder.
I get the following error:
Messages for this page are listed below.
Error
SQL error during statement preparation. Statement: SELECT Employees.EMPLOYEE_ID, Employees.FIRST_NAME, Employees.LAST_NAME, Employees.EMAIL, Employees.PHONE_NUMBER, Employees.HIRE_DATE, Employees.JOB_ID, Employees.SALARY, Employees.COMMISSION_PCT, Employees.MANAGER_ID, Employees.DEPARTMENT_ID FROM EMPLOYEES Employees WHERE (( ( ( UPPER(Employees.FIRST_NAME) LIKE UPPER(:vc_temp_1) ) OR ( ? IS NULL ) ) ) )
Error
Missing IN or OUT parameter at index:: 2
Is this a bug or this doesn't work by design?
Edit: and if I create named query I get the following error:
Caused by: oracle.jbo.NoDefException: JBO-25058: Definition fn of type Attribute not found in EmployeesView1
at oracle.jbo.server.ViewObjectImpl.findAttributeDef(ViewObjectImpl.java:5634)
at oracle.jbo.uicli.binding.JUSearchBindingCustomizer.getQuickSearchVC(JUSearchBindingCustomizer.java:847)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.processQuery(FacesCtrlSearchBinding.java:222)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.el.parser.AstValue.invoke(AstValue.java:151)
... 47 more
I think just ran out of options...
Message was edited by:
Jernej Kase -
Hallo,
i have a problem with following query. I wanna update the columns in the nutzung table. There are 7 columns but my query updates the geometry that in all columns is the same geometry or I can not update because the query gives more than 1 row in the subquery.
update nutzung
set geometrie=(SELECT F1840_GEOM FROM UG_F1840_GEOM,Nutzung WHERE NUTZUNG.OBJNR=UG_F1840_GEOM.F1840_OBJNR AND GETFEATUREID(UG_F1840_GEOM.F1840_FID) IN(SELECT MSLINK FROM FEATURE WHERE FCODE like '%0000'));
Maybe I need the ug_f1840_geom table in the update query. Don't know how to change the query.
Regards, Katrinhi it's me again .I am getting error for this
statement
if(numOfUsers>0)
stmt.executeUpdate("update defaultchatrooms set
s set nodename =
'"+chatTopic+"'('"+numOfUsers+"')'");
1. Your update string looks like this:
update defaultchatrooms set nodename = 'someChatTopic'('0')'
Does that look right to you?
2. This will update the column nodename in every row in the table defaultchatrooms. Aren't you missing a "where" condition? -
Hello ,
iam having problem with jump query when i execute the web report but the same jump query is working fine in Bex analyzer.i think there are some settings need to be done in SAP WAS for web report. if it so can anybody tell me how to maintain these settings so that i can execute the my web report.
Regards
KomalHi Komal,
What is the problem you are facing while executing the report.
Are you working on WAD? Explain clearly about your problem you are facing.
Regards,
KK. -
Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help meWhat are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected] -
One more Problem with SAP query
Hi All,
I am having a problem with SAP query
Execution of SAP query transaction is leading to Dump
the dump says Field 'R01' contains no fields, syntax check on the program shows same error.
When I tried regenerating the Query in SQ01
" Query Specification cannot be use to generate list
Ranked list contains only numeric fields
Please help meGianpiero Bucchieri wrote:
> So its important to listening the following tables too: Faktura (invoice), Partner Role, Partnernumber and the requierements number. The table are EKKO EKPO AND VRKPA OR vbkd, but if I join this table the query doesn't listining any results. If I cancel this 3 or 4 table and I start the query, the listening are ok.
>
I am not sure what business process you are describing here - is it some kind of third-party sales order? If so, your join is wrong.
From VB E P, firled BANFN and BNFPO you can go to table EBAN, where in field EBELN you will find the number of the purchase order (if somebody already had an MRP+Me58 run over the PR) which will lead you to table EKKO, and EKPO.
So what we have here (essentially is):
VBAK -> VBAP -> VBEP -> EBAN -> EKKO -> EKPO
But that only solves one of your problems - you still have a long way to go to get invoices, partner and partner roles into there and I am beginning to ask myself what exactly it is you want to evaluate.
Care to explain?
Edited by: Mylène Dorias on Apr 1, 2010 2:10 PM -
Reporting designer - problem with insertin query
hi, I have problem with inserting query into reporting designer, when i do it there occurs metadata error and the system write check query, but query is ok, there are no variables. Have you any idea whats the problem.
thanxI had a similar problem after "upgrading" to SAPGUI 7.10, except my failure was in the BEx Analyzer. (We are still using BW 3.5 SP 18.)
The solution I found was in SAP Note 1039191 which addresses this problem for both the Analyzer and the Query Designer, and includes a revised "wdbsPres.dll" file as a workaround. After downloading and installing this file, the problem was resolved.
BTW, I have asked SAP when this will be fixed in a future FEP, but they have so far only given me a very ambiguous reply suggesting that I try it on another PC.
Hope this helps...
Bob -
Hi .
I was creating the pass the values t in temp tables though s sis package vs2012 .
First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
exec USP_GETMP02333
go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
[Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help meArthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon. -
Hi All,
This is regarding a problem in the adhoc query.
For one adhoc query in the selection field only personnel number is there. The adhoc query selects from 0022-infotype.In this case if the reporting period is ALL, all infotype records belonging to 0022 infotype are selected. Even if the end date of the infotype record is less than the initial date of Org.assignment.
For the second adhoc query in the selction field only
personnel area is there. In this case the adhoc query doesnot select infotype record belonging to 0022 infotype
if the end date of the infotype record is less than the Org.assignment.
Can anyone explain me this strange behaviour.
Points will be rewarded.
Regards,
AravindSome more additional info about the problem.
Suppose in the selection screen there are 4 fields
Company code, Personnel area, Personnel sub area and Personnel number.
If you fill both Personnel subarea and personnel number,
data record belonging to education infotype but whose end date is greater than the start date of Org.assignment
infotype is not selected.
But if you fill only personnel number the same data record belonging to education infotype is shown with blank values for Org.assignment.
I tried debugging and found out that in the first case
since there is no Org. assignment record for the time period of the education infotype nothing is shown.
In the second case, it is allowed to be shown with blank values for Org.assignment.
Any explanation for this behaviour? -
Problem with the query of Sharepoint Calculated Fields
Hello,
I am developing an application in sharepoint 2013 foundation. but i have problems with a list, when executing a caml query on a calculated field. I try the solution of this blog
http://sptalks.wordpress.com/2013/03/25/query-on-calculated-field-problem
but i got no result
attentive to any comments
thanksHello,
This is my CAML Query
<View>
<ViewFields>
<FieldRef Name="ID" />
<FieldRef Name="PermMask" />
<FieldRef Name="FSObjType" />
<FieldRef Name="Nombre" AutoHyperLink="TRUE" />
<FieldRef Name="Apellidos" AutoHyperLink="TRUE" />
<FieldRef Name="Cargo" /><FieldRef Name="Edad" />
<FieldRef Name="Compa_x00f1_ia" />
<FieldRef Name="Created" />
</ViewFields>
<Query>
<GroupBy Collapse="TRUE" GroupLimit="30">
<FieldRef Name="Compa_x00f1_ia" />
<FieldRef Name="Edad" />
</GroupBy>
<OrderBy>
<FieldRef Name="ID" />
</OrderBy>
<Where>
<Contains>
<FieldRef Name="Ano" LookupId="FALSE" />
<Value Type="Text">2014</Value>
</Contains>
</Where>
</Query>
</View> -
Hi,
I'm having a problem with the following simple XSQL document:
<?xml version="1.0"?>
<xsql:query connection="xsqltest" xmlns:xsql="urn:oracle-xsql">
SELECT concat(concat(forename, ' '), surname) AS Name
, d.name AS Department
FROM emp, dept d
WHERE emp.dept_no = d.id
ORDER BY surname
</xsql:query>When I transform this using the command line xsql, it produces the following (as expected):
<?xml version = '1.0'?>
<ROWSET>
<ROW num="1">
<Name>Cindy Delight</Name>
<Department>Accounting</Department>
</ROW>
<ROW num="2">
<Name>Adrian Rue</Name>
<Department>Product Development</Department>
</ROW>
<ROW num="3">
<Name>Dwight Dweeb</Name>
<Department>Accounting</Department>
</ROW>
</ROWSET>However, when I access the same page through my browser, the output is:
<?xml version = '1.0'?>
<xsql:query>
SELECT concat(concat(forename, ' '), surname) AS Name
, d.name AS Department
FROM emp, dept d
WHERE emp.dept_no = d.id
ORDER BY surname
</xsql:query>(this is the same as the input document, except the namespace declaration has been stripped out, making the XML invalid).
I've tried including other xsql tags in the same document (e.g. xsql:include-xsql), these seem to work fine. Also, if I change the connect details, XSQL fails as expected, so it would appear xsql is being invoked by Tomcat (.xsql is mapped to the servlet), and XSQL successfully connecting to the database.
My setup is slightly unusual: I'm trying to use XSQL 1.0.4.1 with MySQL 3.23.32 using the mm.mysql 2.0.4 JDBC drivers. This is running on Tomcat 3.2.1 with JDK 1.3 (OJVM 1.2.330). But, since it works with the command line xsql, I'm at a loss as to why it's misbehaving through the servlet engine only... any ideas?
SteveHmm,
Even more confusing - the same .xsql document works fine with WebToGo - so I guess this is a Tomcat problem, somehow... Just can't understand why xsql:include-xsql works and xsql:query doesn't.
Steve -
Problem with the query in group by clause
hi, i have problem with group by clause, can some one please help me.
select
header_id,
(select sum(nvl(dr,0) - nvl(cr ,0)) from temp_tab a1
where
a1.country=a.country
and a1.source='AP'
and a1.header_id=a.header_id) WHT,
sum(dr),
sum(cr) from temp_tab a
group by header_id,
(select sum(nvl(dr,0) - nvl(cr ,0)) from temp_tab a1
where
a1.country=a.country
and a1.source='AP'
and a1.header_id=a.header_id)
select * from temp_tab
drop table temp_tab
create table temp_tab(header_id number ,line_num number, country varchar2(2),
source varchar2(2), dr number, cr number,primary key(header_id,line_num));
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(1, 1,'NL','AP',100,20);
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(1, 2,'PO','AP',20,20);
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(1, 3,'NL','AP',70,20);
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(2, 1,'NL','PA',100,20);
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(2, 2,'NL','PA',100,20);
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(3, 1,'KR','PO',100,20);
commit;
Appreciate your help.
Thanks,select header_id,
(select sum(nvl(dr,0) - nvl(cr ,0)) from temp_tab a1
where a1.country=a.country
and a1.source='AP'
and a1.header_id=a.header_id) WHT,
sum(dr),
sum(cr)
from temp_tab a
group by header_id
,countryIt's kinda hard to follow what your query does... maybe because I'm only at my second coffee..
Edited by: Alex Nuijten on Oct 2, 2009 8:07 AM
Maybe you are looking for
-
Linkinking error msg on status bar and a popup window
Hi My requirement is that whenever an error msg comes on status bar after execution,i need to double click on that error msg and followed by that a popup window should appear with the customised details about error msg. plz suggest some solution or s
-
Powerbuilder mysql catalog tables
I use PowerBuilder 12.5 with mysql 5.6.12 via ODBC MySQL 5.2 Unicode driver, but in database painter I get "Catalog tables could not be created and are not available for use". In database properties->system tab->Powerbuilder Catalog Table Owner I hav
-
Hello Everyone, In Oracle 10g,I have table emp_history and column name hired_date,which has the values in the following format 7/8/2011 12:55:55 PM ('mm/dd/yyyy hh12:mi:ss AM') ana this table has more than 50 thousand records, when I tried to get the
-
Hello Frineds I want to convert from String to Long. My String is like str="600 700 250 300" and I want to convert it to long and get the total value in to the long variable.like the total of str in long varible should be 1850. Thank You Nilesh Vasan
-
Business Content Reports -Financial Accounting and Controlling
I am working on Reporting piece..I have no prior experience in Reporting, Now I am struggling to understand the reporting background from Business view and what are the reports availabel in BC and how to analise them. Now I am just thinking I will un