Problem with administrative share

Hello!
We have headache-giving problem with Administrative Share in our company.
Network looks like this:
1) Server VLAN - x.x.10.1
2) User VLAN - x.x.11.1
3) Domain Admins VLAN - x.x.12.1
Now for that situation.
When we trying to access Administrative share (C$) from Admin VLAN to User VLAN, it's all fine
From Admin VLAN to Server VLAN - all fine
From Server VLAN to User VLAN - problem
What we found
Our network guy ensured us, that all three VLAN's are wide open to each other
We can't access share on variety of OS - WIndows XP, Windows 7 32/64
Windows share is turned on using Group Policy
File sharing is allowed in Windows firewall
On server we are logged via RDP with Domain Admin accout, which is in local Administrators group on every station on user VLAN
Share service is running
Any ideas?
MT

Hi,
Is there any error message when you try to access Administrative share (C$) From Server VLAN to User VLAN and can you access other administrative share (F$, G$, H$, etc.)? Can you access Administrative share (C$) From Server VLAN to Admin VLAN?
Please also refer to the thread below to see if it is helps:
Unable to access administrative share
http://social.technet.microsoft.com/Forums/en-US/6d0ef498-47c1-4b55-a716-633af7de61d7/unable-to-access-administrative-share?forum=winserver8gen
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

When i login with microsoft account cannot access with administrative share c$

i have a problem when i login to windows with microsoft account cannot access any network computer with administrative sharing c$,d$ with windows 8.1
but when i login with local account can access
and some people tell me create key in regedit t fix it
after enter user name and password show this error
and i apply your instruction and not fix until now
note:
my Machine windows 8.1 if another machine in network windows 7 can access a hidden share if machine in network windows 8.1 show this message in image 2
but if i login with local user can i access all machine hidden share network windows 7 and 8.1

yes this computer i want to access name poland2-work and have two users
first :administrator
second : poland 2

Photoshop/Bridge CS4 problem with AFP shares

Hello,
I have recently purchased Photoshop CS4 and encountered the following problem: when opening images from a NAS share connected via AFP using File/Open command, Photoshop will correctly display the list of files but Open command in the File open dialog remains disabled after a file is selected from the list.However, I can open the same file by dragging and dropping it from the Finder to the Photoshop Dock icon or later using the Open recent menu command.
Similar problem is visible in Bridge: it will not display the image thumbnails from any of the subfolders in the network share.
I am using Leopard with the latest updates, I have a read/write permissions to the network share and Photoshop/Bridge are the only applications that have problems browsing/opening files from the network share. The NAS unit is a Synology DS-107+ with the latest official firmware.
Futhermore, I have noticed that I can work around the problem by opening the same directory in Finder. After the image thumbnails are visible in Finder, both Photoshop and Bridge will correctly open all files in that directory but opening files from other directories still has the problem.
Does anyone have any idea on what might be causing this strange problem?

This is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://www.adobe.com/support/techdocs/322391.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

Illustrator/InDesign problems with AFP shares on Xsan

Hi,
Has anyone else been having problems with Adobe apps overwriting files on AFP shares that are stored on an Xsan? Errors that come up vary from error -47 to error -5000 and generally mention that the user doesn't have permission.
They do have permission, and things are fine if they save to their desktop then copy to the server and overwrite the file that way. They're fine saving initially as well. Other applications don't have a problem either.
Anyone have any ideas?
Server is 10.4.3, Xsan 1.2.
Thanks,
James

Hi, This have nothing to do with Xsan, because i have the same problems on 3 of my servers, on 10.2.8, 10.3.9 and 10.4.4 with simple afp shares! It seems that Adobe srcrewd up big time!

Problem with SMB share

Hi!
I have a problem when connecting to a SMB file share on a Windows 2003 R2 server (also acting as a Domain Controller for the Active Directory domain) using OS X 10.5.2.
I've just reinstalled Leopard to rule out any problems with messy configuration on the client, but the problem persists. The newly installed Leopard client is not a member of the AD domain at the moment.
When connecting to the server share (with cmd+K in Finder), I have to login using a AD account. The share is after successful login accessible through Finder and I could traverse the folders and read / copy all the files on the share. I could also save smaller files (less than 16 KB) to the server.
However, if I try to save a larger file (more than 16 KB) the files gets created on the server share, but stays a 0 KB. The access to the server share freezes during 60 seconds and the "Copy" window just tells me it has copied 0 KB of the file so far. No data seems to be written to the file at all.
After Finder gives up, the "Copy" windows tells me that "The operation cannot be completed because you do not have sufficient privileges for some of the items".
From time to time Finder has also disconnected the share during problems, and OS X has crashed on me in kernel panic four times when testing. I haven't been able to track down the action triggering these errors yet.
The shares on the server works just fine when using the same username/password from a Windows XP client machine.
I don't see this problem when mounting a share from a Windows XP client in Leopard.
What could be wrong here? Is there some setting on the Windows server that has to be done to work with Leopard? (I've read about the SMB signing, but Leopard shouldn't need the signing to be turned off, should it?)
At the moment I'm having a hard time using the shiny new MBP at work, so any help on this would be highly appreciated!
Best regards, Jonas Mixter

I have an issue with OSX Leopard (10.5.2) , where by I can't write to NTFS shares on W2K3 servers with SMB signing turned on and IPV6 disabled for the interface.
To recreate the issue:
Create a folder named test that contains two files one named ._test.txt and test.txt on OSX and copy to an SMB share on W2k3.
This results in spurious errors about permissions and locked files.
Copying a file larger than 4k results in the error:
"The operation cannot be completed because you do not have sufficient privileges or some of the items."
Using mount_smbfs from a shell on OSX results in the error: "Permission denied"
host:~ user$ mount_smbfs //user@server/share /Volumes/test-smbmount/
Password:
host:~ user$ cp test.docx /Volumes/test-smbmount/
cp: /Volumes/test-smbmount/test.docx: Permission denied
Using smbclient from a shell on OSX results in SUCCESS!!!
host:~ user$ smbclient \\\\server\\\share -U user
Password:
Domain=DOMAIN OS=Windows Server 2003 3790 Service Pack 2 Server=http://Windows Server 2003 5.2
smb: \> put test.docx
putting file test.docx as \test.docx (784.7 kb/s) (average 784.7 kb/s)
smb: \>
There is an alternative solution if you do need to drag and drop in your gui world, it'll cost you $120
link: http://www.thursby.com/products/dave-eval.html
I have mailed the developer as he has obviously identified the root problem of the issue and I urged him to share his patch/resolution with Apple in the interests of the user community and a darn nice thing to do.I had a response form the developer to my request. I sent my workaround solution to the developer and stated that in my opinion the pricing for the software seems unnecessarily high based on the functionality it provides and way above what I would be willing to pay to resolve one small issue.
<developers response>
Pricing is a difficult topic to discuss -- but if you have no use for the product, any price is too much. As for reporting bugs to Apple, they'll listen to customers much sooner than they'll listen to developers. And they have some of the brightest engineers I know. If you report the bug to them, they'll likely have it fixed in the next update.
</developers response>
I couldn't find away to report the bug myself so I had a friend do it for me. The response I had back from Apple was less than satisfactory.
They believe that the issue is to do with NTFS streams and that a file containing ".com.apple.smb.streams.on" needs to be created and placed into the root of shared volumes. This is not a fix!
If you want to prevent writing the "Apple Double" files to a remote share, enter the following into a terminal:
$ defaults write com.apple.desktopservices DSDontWriteNetworkStores true
Problem still exists.
ref: http://docs.info.apple.com/article.html?artnum=301711
<apple double description>
ref: fhttp://docs.info.apple.com/article.html?artnum=106510
Before Mac OS X, the Mac OS used 'forked' files, which have two components: a data fork and a resource fork. The Mac OS Standard (HFS) and Mac OS Extended (HFS Plus) disk formats support forked files. When you move these types of files to other disk formats, the resource fork can be lost.
With Mac OS X, there is a mechanism called "Apple Double" that allows the system to work with disk formats that do not have a forked file feature, such as remote NFS, SMB, WebDAV directories, or local UFS volumes. Apple Double does this by converting the file into two separate files. The first new file keeps the original name and contains the data fork of the original file. The second new file has the name of the original file prefixed by a "._ " and contains the resource fork of the original file. If you see both files, the ._ file can be safely ignored. Sometimes when deleting a file, the ._ component will not be deleted. If this occurs you can safely delete the ._ file.
</apple double description>
I am not the only one this issue. A quick peruse on http://macwindows.com/ will show that numerous people are suffering and numerous workarounds have been suggested. Sadly none of which work for me. Each work around is stranger than the previous. Such as disabling IPV6 and updating Daylight Savings Time.
The issue lies with the samba integration. I am primarily a Gentoo Linux user and this kind of bug would have been resolved almost instantly if present in open source software.

Mac OS X 10.5.7 Server - Problem with SMB-Share

Hi@all,
i've following problem with my Mac OS X Server.
I want to disable the virtual share points of SMB with Server-Admin.
After disabling the virtual share point and saving, the virtual share points are autmotically enabled again. I don't know why and how i can solve this problem.
Does anybody know, what is going wrong?

Try the Server Products forums.

Having a problem with family share... it's telling me I can not add my daughter for a year!!!??? this is bullcrap n I need help to be able to add her... does any one have any ideas?

needing help with family share that isn't allowing me to add my daughter for a year!!!

That happens because there is a restriction from changing family groups more than twice per year. Unfortunately, a number of people have inadvertently triggered this in the process of setting up Family Sharing. There isn't anything you can do about it on your own; all you can do is contact Apple support to see if they would override this at their end.

Problems with Administrator Account

I am presently using my G4 PowerBook while I am away in Australia. It is running system 10.4.11.
It is set up with three accounts: administrator, my wife's and a visitor's account. Both the administrator account and my wife's can administer the computer. The privileges for the visitor account are very limited.
During the last few days the administrator account is behaving very oddly. It allows only one window to be open at anytime. For example, if I am running Text Edit and I decide to bring up Safari, the Text Edit window will disappear although the programme continues to run in the background. I have tried running other pairs of programmes and the fault seems to be universal. When I cycle through open programmes by typing Command-Tab, all open programmes are represented.
Now when I open up my wife's account, the computer behaves normally and one can have multiple windows open and drag and drop as usual.
I have repaired permissions and run Disk Utiltiy from the original install disk. This process suggests that all is not well with the hard drive. When I ran Tech Tools, from the CD I obtained with my Apple Care, it suggested that the hard drive needed repair. I carried out the repair process and was told that everything was OK.
I hoped that the upgrade to 10.4.11 would sort out the problem but it has not done so. It is behaving as if there is a check box somewhere that allows for multiple windows that has become unticked. I have searched high and low but have not been able to find anything amiss. I use Macaroni which carries out regular Unix maintenance.
Any clues, anyone?
Many thanks in advance.
David Amies

Ok, what I will get you to do is take each file I list below and drag it to the desktop, the log out and back in and test. Drag only 1 or 2 at once until the problem disappears. If after moving some files and testing and the issue persists, replace them in the preferences folder. If you pull multiple files to the desktop at once and the problem stops, replace them one at a time until it is apparent what file is the culprit.
com.apple.finder.plist
com.apple.dock.plist
com.apple.desktop.plist
com.apple.dashboard.plist
com.apple.dashboard.client.plist
com.apple.FolderActions.plist
com.apple.FolderActionsSetup.plist
com.apple.LaunchServices.plist
com.apple.help.plist
com.apple.helpviewer.plist
com.apple.MenuBarClock.plist
If none of those work, message me back for a few more.
Good luck!

Problem with file share from iTunes to iPad - not enough memory

Hi
I've got iTunes (10.7.0.21) installed - latest version.
On my iPad I have an app - OpenSong. I need to transfer a number of files to this app throug Application - File share (don't know if this is the correct description, I use a Danish version).
I want to add around 750 small files (1-3 kb) to the iPad. The problem is that it only will copy around 30-60 files at a time before iTunes comes with a box indication that the program encountered a problem and cannot copy the file xxxxx. "Not enough availabel memory".
I then have to close iTunes and continue from where I came to. If i don't, that is I try to copy again, iTunes frequently crashes.
iPad 3, 64 GB - plenty of free memory
Win 7, 4 GB RAM, plenty of free disc space. Windows and iTunes fully updated.
Anyone got an idea? Or how do I report this to Apple?

Hi Damse,
I have the same problem. I also have about the same number of small files to transfer to the iPad. The point at which the transfer through iTunes to the iPad varies within the range you describe. I also have taken to loading in as many files as I can, integrating them into the applicatiom, ejecting the iPad, and stopping and starting iTunes again and repeating the process.
Best regards,
Bob Charest

Problems with administrative password

I'm trying to help my parents fix their airport problems, which complicates things because I haven't been through this at every step, so I'm not exactly sure what the computers have been through.
The main problem, though, seems to be that their airport was set up to where only approved computers could access the wireless network, rather than a password. The problem is that their old administrative computer crashed and they got rid of it. Now, any laptop that was already approved still works fine with the airport, but wee can't figure out how to approve any new computers to work with it, since the administrative computer is no more. Is there any way to reset the airport, or create a new administrator without the old one?
Thanks.

Normally you would not need to do anything for other computers to join as long as you provided them the encryption password (if you have wireless encryption enabled).
To configure the AirPort Extreme base station (AEBS) you would use AirPort Utility (found in /Applications/Utilities on a Mac). First thing that you should do is disable MAC address filtering. The 2nd thing you should do is enable WPA2 wireless encryption with a long non-dictionary password. If you have some computers not compatible with WPA2 you can try WPA and then even down to WEP.

Problems with Screen Share with Back to My Mac

Hi everyone, I'm at a loss right now... I had Screen sharing previously working with my fathers Macbook air (using my apple ID) so i could help him with troubleshooting from time to time. I just recently did a clean reinstall of Mountain Lion on my iMac. I am in the process of setting everything up again but it doesn't seem to be working. I have done what the directions call for but it's still not working. Not sure if it has to do with my clean install and having to redo something on my fathers computer too. another strange problem is that in the sharing section of my Macs system prefs, under screen sharing I am unable to remove any users from the Allow Access for section. the button does nothing at all. can someone do a step by step on how to make that connection to my fathers computer. and yes Back to my mac is turned on on both computers. thanks
ps. I just noticed that i have a couple of Unknown users under my
Allow Access for section, and i can't delete them either.

I see that. The problem is that the log in choice only lets me share the screen of my admin account. I want to share the screen of a standard account which is where I do all my work. So I connect to the standard account and then when I go to share the screen I get the "share screen request"
I just tried to log out of the admin account and into the standard remotely and that worked. Strange way to do it but as long as it works I'm fine with it.
Thanks for the response, it did solve my question because it helped me figure out how to do it.

Problem with Administrator

Hi all,
I am VERY new to ColdFusion and am feeling my way around. I
have coldfusion MX installed on my laptop (running Windows XP) and
so far have been able to run some basic .cfm pages but when I get
to start learning about databases I am stumped.
From what I have read I need to identify/setup my database
using the Administrator panel. However when I try and launch it, I
get the general error message:
****Please Try The Following:
Check the CFML Reference Manual to verify that you are using
the correct syntax.
Search the Knowledge Base to find a solution to your
problem.****
I've looked at the file (CFIDE/administrator/index.cfm) in
dreamweaver and it appears to be corrupt. Is there a quick fix for
this? Can I download the required files or do I need to do a
complete uninstall and reinstall of coldfusion?
I've been looking around the forums for some help and I'm
guessing that someone is going to ask me IIS or Apache...and the
thing is - i'm soooo new that I don't really know how to tell!!
(embarassing to admit but true :))
Can anyone give me a pointer in the right direction? (and
please don't say "give up now" :)
Cheers.

Hi Gary,
Thaks for that distinction - nice to know! :)
I was actually using
http://localhost:8500/cfide/administrator/index.cfm
for my other pages and they seemed to work.
Anyway not to worry, I reinstalled CFMX7 and all is going
well....so far.....
I do have another question but it has a different topic so
I'll start a new thread.
But thanks again for stopping by to help out.
Cheers,
Eaine.

Problems with administration console

I try to launch the administration console by using this command.
java -jar oc4j.jar -console
It doesn't works
The error message is :
Exception in thread "main" java.lang.ExceptionInInitializerError
at com.evermind.server.ApplicationServer.launchCommandline(ApplicationServer.java:837)
at com.evermind.server.OC4JServer.launchOC4JCommandline(OC4JServer.java:194)
at com.evermind.server.OC4JServer.main(OC4JServer.java:232)
Caused by: java.util.MissingResourceException: Can't find bundle for base name com/evermind/client/assembler/Assembler, locale fr_FR
at java.util.ResourceBundle.throwMissingResourceException(Unknown Source)
at java.util.ResourceBundle.getBundleImpl(Unknown Source)
at java.util.ResourceBundle.getBundle(Unknown Source)
at com.evermind.util.FallbackResourceBundle.getBundle(FallbackResourceBundle.java:81)
at com.evermind.util.FallbackResourceBundle.getBundle(FallbackResourceBundle.java:76)
at com.evermind.client.assembler.Assembler.<clinit>(Assembler.java:24)
... 3 more
I use oc4j standalone version 9.0.0.3
and the jdk 1.4
on a w2000 in console mode
thanks

Hi S B
I agree with the rest of the complainers:
Orion seem frozen in its tracks for more than a year
now since Oracle took it over.
I'm not sure if you're saying that OC4J hasn't developed or Orion hasn't developed in the last year.
I know we've been working hard on OC4J. OC4J now leads the SpecjAppserver benchmarks for some categories in both the 2001 and 2002 editions -- big deal you may say -- but that shows OC4J can run complex apps at high workloads and achieve good performance levels. OC4J is J2EE 1.3 compatible and we have an preview release which exposes some J2EE 1.4 functionality in which which we have also integrated TopLink as the CMP provider and provided Web Services capabilities which use JAX-RPC and support for WS-I.
> The barrier to entry for developers are as follows:
>
1) The documentation is all over the place on
technet. They need to consolidate the docs into one
big manual like all the other J2EE vendors.
All the official product documentation for each production releaseis available from one place on OTN.
http://otn.oracle.com/documentation/ias.html
This is accessible from the doc tab on the top of the OTN page.
The early doc we put out for the preview releases is usually linked off of the OC4J specific area -- is this what is hard to find? I'd appreciate any comments on specific doc you found hard to find so we can try and fix it.
2) No administrative console except that bulky
enterprise manager
Enterprise Manager is being slimmed down (and quickened!) for the 904 release.
We're aware that we need an alternative solution for management for the standalone distribution. We have implemented a JMX server and requisite MBeans/APIs per JSR77/88 and this will be available in the OC4J 10.0.3 release. A preview of this is available today. We are also shipping a demo console with the preview which uses the JMX capabilities to do deployment and management of the server.
3) Lots of undocumented features you need like
dmsoc4j/Spy that it seems only oracle internal people
and people that troll forums can find
We have a lot of capabilities in the product, so it's likely there are some pieces that are not covered in each piece of documentation. The DMS spy utility is described in the performance documentation book for the product. The concepts guide does try to present a relatively high level description of all the components of OracleAS and is worth a quick read to get across all the moving parts.
4) (most of) the examples are all written by
inexperienced hacks who make them so overly
complicated that the are impossible to use for
learning. The ant scripts for them are terrible
Can you point to which specific examples you are referring to here so we can get it looked at and addressed.
Please OC4J team, put some work into making the
product more useable, clean up the docs and examples,
and for godsakes rename the classes to
com.oracle.oc4j. That's the first sign that you guys
doing a sloppy job of taking it over. And not the
only. Can I ask why do you need the packages renamed? How does that have any effect on you as a developer?
I look forward to your improvements and would offer
to help if it was at all pluggable. Too bad, my
efforts will go to jboss instead.Thanks for the time you put into the feedback.
-steve-

Problem with ESSO: Share credential

I'm using ESSO ver. 10.1.4.0.4 to do Single Sign-On with 2 in-house client-server applications that authenticate with SQL Server user on the same SQL Server (Version 7) . That's mean these 2 applications use the same username/password. These applications contain change password feature so if user change password in one application the other has to remember this new password also.
So I use the share credential feature of ESSO. Trying to carefully look at the maual but that's not seem to work. Has anyone have successed to use this feature? How you make it? Do you have a trick or some workaround?
Thank you for any coming advice.
Satit Auputtinun

Hi
You have that enable Credential Sharing Group doing the following steps:
Global agent setting->Live->End-User Experience->Password Change->Required
bye

HT201364 having problems with administrator & password having installed Maverick

Having installed Maverick OSX it does not allow me to unlock any preferences until I enter an Administators name & password of which I do not know please HELP!!

OS X 10.7 Lion, 10.8 MountainLion & 10.9 Mavericks
Reset Password using Recovery HD
Boot into Recovery Partition.
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.

Problem with administrative share

Similar Messages

Maybe you are looking for