Problem with Adobe X Pro when scanning horizontal tables

My problem is the following:
When trying to scan physical documents which contain tables (Excel type) oriented horizontally along the paper, using Adobe Acrobat X Pro, it prints an incomplete table with vertical orientation (basically it forces horizontal images to have a vertical orientation, losing part of them).
I'm sure this is just a configuration issue, I would be very grateful if you could help me locating the parameter that should be corrected.

Problem was the paper size
Just set a bigger one

Similar Messages

Audio-Problem with Adobe Premiere Pro CC 2014 by using long Clips in AVC-Intra Codec (4Gb Border)

Hello
We own a Panasonic camera (AJ-PX5000G) and we film in 1080p50 with the AVC-Intra100 Codec. When importing longer clips in Premiere Pro, the video is fully loaded, but the waveform of the sound ends at the Time Code 00:02:28:35.
Sometimes the sound could be played after this Timecode but otherwise there is no audio. Even if we use the same clip several times we see that it works sometimes and sometimes not. It looks random.
We also tried to import the Clips with Adobe Prelude directly from the P2-Card but there are the same problems.
The Clips in 1080p50 AVC-Intra100 have a bitrate of 227Mbps. After 2 Minutes and 28 Seconds 4Gb are written on the P2-Card and the Camera starts a new picture file and 4 sound files..
It looks like Adobe Premiere Pro has problems with the correct relation of the files that all get together to one clip.
Is there anybody who can confirm this problem? Can anybody help me with this Premiere Problem?
Dennis
(Workstation: Dell Precision T3600, Intel Xeon E5-1620 @ 3.60 GHz, 16 GB RAM, Windows 7 Professional 64-bit, Service Pack 1, Premiere Pro CC 2014.1 (Build 8.1.0)   )
Mediainfo of the P2-Cards:
General
Complete name                            : \CONTENTS\VIDEO\0068T7.MXF
Format                                   : MXF
Format profile                           : OP-Atom
Format settings                          : Closed / Complete
File size                                : 3.92 GiB
Duration                                 : 2mn 28s
Overall bit rate                         : 227 Mbps
Encoded date                             : 2014-10-15 13:33:41.000
Writing application                      : Panasonic P2 2.0
Writing library                          : Panasonic P2 2.0
Video
ID                                       : 2
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : High 4:2:[email protected]
Format settings, CABAC                   : No
Format settings, GOP                     : N=1
Format settings, wrapping mode           : Clip
Codec ID                                 : 0D01030102106002-0401020201323104
Duration                                 : 2mn 28s
Bit rate                                 : 227 Mbps
Width                                    : 1 920 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 50.000 fps
Standard                                 : Component
Color space                              : YUV
Chroma subsampling                       : 4:2:2
Bit depth                                : 10 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 2.193
Stream size                              : 3.92 GiB (100%)
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
Mediainfo Audio-Datei P2-Card:
General
Complete name                            : \CONTENTS\AUDIO\0068T700.MXF
Format                                   : MXF
Format profile                           : OP-Atom
Format settings                          : Closed / Complete
File size                                : 13.6 MiB
Duration                                 : 2mn 28s
Overall bit rate mode                    : Constant
Overall bit rate                         : 770 Kbps
Encoded date                             : 2014-10-15 13:33:41.000
Writing application                      : Panasonic P2 2.0
Writing library                          : Panasonic P2 2.0
Audio
ID                                       : 3
Format                                   : PCM
Format settings, Endianness              : Little
Format settings, wrapping mode           : Clip (AES)
Codec ID                                 : 0D01030102060400
Duration                                 : 2mn 28s
Bit rate mode                            : Constant
Bit rate                                 : 768 Kbps
Channel(s)                               : 1 channel
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Stream size                              : 13.6 MiB (100%)

Hi,
we have the same problem!
It is not possible to play audio with the AVC-Intra100 Codec fluently.
Can anybody help?
Thanks,
Anja

Problem with Adobe Acrobat Pro Extended version 9.3.4 reading Inventor 2009

I would like to be able to generate 3D PDF files from Autodesk Inventor CAD models (e.g. .iam files) using Adobe Acrobat Pro Extended. I am constrained to use Inventor 2009. When I originally installed Acrobat Pro Extended, I was able to make this work after installing the IMPORT3D update at:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4073
Recently (9/5/2010), I updated Acrobat Pro Extended to version 9.3.4. I believe that following that update, I lost the ability to read in Inventor 2009 files. Acrobat Pro Extended now gives the error messages:
"Exception has been raised" followed by:
"Acrobat could not open 'file' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). To create an Adobe PDF document, go to the source application. Then print the document to Adobe PDF."
This is exactly what happened when I first installed Acrobat Pro extended and before I installed the IMPORT3D update mentioned above. I tried re-installing that update but now the installer gives the error message:
"No qualifying products found to apply this update."
Note that Inventor 2009 does allow one to "Save Copy As" to PDF format, but this just creates a 2D PDF snapshot of the current model view -- same for print to pdf.
I suppose one thing to try is removing Acrobat Pro Extended and then re-installing without the 9.3.4 update, but with the IMPORT3D update -- but if that is necessary, then I won't be able to take advantage of any further updates (e.g. security updates) to Acrobat, which seems like a bad situation.
Has anyone else had this problem? Or is it just me?

I may have figured out what was causing my problem with conversion of Inventor 2009 to 3D PDF. After playing around with a number of inventor files, I discovered that the conversion worked fine when there were no references to external files. For example a .ipt file (part file) seemed to convert fine. I believe the problem was that on the form one obtains with Edit->Preferences->Convert to PDF->Autodesk Inventor->Edit Settings->Import->Assembly, the check box for "use root file directory" was NOT checked. Oddly, this is the default and I'm pretty sure I tried setting the conversion options to the default. In any case, I now seem to be able to perform the conversion of Inventor 2009 to 3D PDF so this problem is solved I guess.

Problem with Adobe Acrobat Pro XI after installation on Mac

I just installed Adobe Acrobat Pro XI on my Mac. My Mac has the correct version of OS and Safari yet I can not launch Adobe. When I launch it, an error box comes up and says a problem has been reported to Adobe. That's as far as it gets. Has anyone had this problem before?

Hi lsgahan,
Please try the following steps and let me know.
Delete all the files from following folders:
Library/Application Support/Adobe/SLStore
Library/Application Support/Adobe/SLCache
And, delete all files from following folder except cache.db
Library/Application Support/Adobe/Adobe PCD
Launch Acrobat and enter the serial number when prompted and check.
Regards,
Rave

Having problems with adobe color engine when converting a 32bit file into an 8bit in Photoshop CC.

I'm having problems with the "adobe color engine" when converting a 32bit file into an 8bit.
Error Message reads: "could not convert the image to 8 bit/channel because of a problem using the adobe color engine.
Never had this problem before, just recently started happening! I've tried multiply files since and some work, some don't, can't work out why!? thought it might be due to a large file size?...any suggestions?

That would require much more info about your files, your system and the version of PS you are using. Presumably there is some color profile issue at play here.
Mylenium

Problem with Adobe Premiere pro cs3 3.0

Hello there! I have this odd new problem in adobe premiere cs3 that i havent encountered before and ive tried to solve it but cant =/
If i import a picture into the project it lies there like it should ready to be dragged onto the timeline, the problem is the preview of the picture and the screen when i drag it into the timeline is black.. i cannot get the picture to appear as it just keeps being black, ive tried diff sizes of pictures, the only pictures that ive found that works so far are the windows example ones..
Answers Asap are appriciated, its a wedding movie and has to be done by tommorow night..

Can you download and install G-SPOT and run those problem files through it. Tell us what G-Spot tells you. That article, that John T. linked to, should have some details on G-Spot, IIRC.
It is likely that the CODEC is not one that is properly installed, or one that PrPro can use to edit. The good things about VLC Player is that it's free, good and carries most of its own CODEC's. The bad thing is that playing an AV file is not the same as editing that same file, and so a test in VLC will only tell you so much.
This ARTICLE will give you some background on CODEC's.
Good luck,
Hunt

I cannot get my HP 6500 scanner to work right with my macbook pro when scanning. Any ideas?

I cannot get my HP 6500 Printer Scanner Fax to scan with my Macbook Pro. Prints fine but won't scan. Any suggestions.

Hi, I had a similar issue with an HPC4480, I unplugged both the power & connecting cable from the printer,
rebooted my mac & then reconnected the printer, it was ok after that, check with the HP site about updates for your particular OS & drivers etc..

Problems with new MacBook Pro when using Front Row

I posted this in the MacBook Pro forum, but someone suggested I post it here, so here goes...
I just picked up a new 15" MacBook Pro 2.4 last night. I was very excited, as I've wanted one for a while now, but when I tried to watch a dvd in Front Row a few strange things happened that I've never seen anyone post about on this board.
First, when I selected play from the DVD's menu, Front Row quit. I launched it again and everything seemed fine as the dvd was now playing, but then I noticed that the backlit keyboard would light up and turn off every minute or two. This went on for the whole time I was watching the disc... about a couple of hours... the keys would light up then they'd be unlit and then light up again.
Finally, while I was watching the dvd the screen went blank... there was still audio, but no picture to go along with it. After I touched the trackpad the video came back. This happened a couple of times.
I don't think it should matter, but I'll also mention that I was using the MacBook Pro on battery while all this happened.
So, has anyone else experienced these issues? I tried looking through all the posted topics, but couldn't find anything related to my experience with Front Row. I'm debating on whether I should exchange my MacBook Pro as I may just have a lemon.
If anyone has any advice/tips I'd greatly appreciate it. Thanks!

I would be curious to know if the same kinds of things happen when you are using the AC power? It's possible that the ambient light was just at the point where the keyboard backlight would turn on and different parts of the movie would make it just light or just dark enough to turn the backlight on or off...
-Doug

Having Problems with Adobe Premiere Pro CC

Alright, So I downloaded and installed the Creative Cloud. I'm trying to download the Adobe Premiere Trail because I'm thinking of buying the product. However, After waiting so *******(Excuse the language, you have no idea how frustrating it is) long to download, I'm not sure if it's downloaded or not. It tells me it is installed, but the program won't open. I've tried uninstalling the program to try reinstalling it again, but it just gives me this "1% to 99%", yet it still keeps telling me that it is installed into my computer. I don't know whether or not it installed because I had to wait long hours for it download and it kept getting errors each and everytime. Now it says on my creative cloud that it is "up to date". Why won't it open? Can anybody please tell me? Does it have to do with system requirements? I have a 32 bit sony vaio laptop. My dad has a 62 bit dell laptop and it works very fine. Please help, I don't know what to do.

kevinm14238495
Premier Pro will not work on 32 bit computer. You need to have64 bit computer to Run the product
Please refer
System requirements | Adobe Premiere Pro

Problem with Adobe Acrobat/Reader when opening a Link in Safari???

For some reason when I'm on a web page that has a link to a PDF file, Safari opens a new window and I get a popup error. See attached screen shot.
Acrobat is not running. I've tried quitting and re-starting Safari (5.1.7) and even restarting Mac OSX (Snow Leopard 10.6.8).
Any ideas???

How? I'm having the same problem.

Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.

There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer?

Communication problem with Adobe 9.0 and HP Printer when I scan

I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.

Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
>

Cannot get C7280 to scan with Adobe Acrobat Pro 8.0. Can you help?

I know this may not be the right place to post this, but here goes. I'm using 10.5.2 along with Adobe Acrobat Pro 8.0, a HP C7280 AIO connected to network via wireless. The normal software I use is HP Scan Pro.
Here's my problem. When I try to scan from Acrobat it will either open the scan pro software, show acrobat as the place to scan to in the bottom, but not do anything. If I "accept", it crashes Acrobat OR it will say it can't communicate, so either way it doesn't work. Any ideas how to make this work?
Thx

*"I know this may not be the right place to post this,"*
Try the Adobe forums: http://www.adobeforums.com

Problem with Adobe 9.5.2 stalling when appending Web Links

Every time I go to append a multi-level web link to a PDF using Adobe Acrobat Pro 9.5.2 it stalls (this problem also occurs on a computer I have with Adobe Acrobat Pro 9.2 installed). I have tried repairing the program, installing updates, and restarting the computer with no luck. This problem only started happening 5 days ago after using the program with no problems for over a year. How can I fix this? Steps to reproduce the problem: 1. Open PDF. 2. Click on Advanced > Web Capture > View Web Links 3. Select desired web link > click "Properties" > chose number of levels or entire site > Press OK 4. Select desired web link again > click on Download Results: Adobe starts to convert the web link for a few seconds and then stalls for hours with no success on a web link that previously only took two minutes to convert a week ago. Sometimes it will crash and I get the message "Adobe Acrobat has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." Expected results: To be able to append the multi-level web link to the PDF.

Hi Jamie,
I was able to reproduce this crash. I've logged a bug with our engineering team. When I hear more, I'll update this thread.
I do not have a workaround for this issue at this time.
-David

File failure with Adobe Dynamic link when opening a *.prproj file - Premiere Pro CS4

Hi everyone,
I'm trying to open a Premiere Pro CS4 file (*.prproj) but the bar that appears sating 'Opening file' (or similar) gets stopped before finishing to load the file.
I tryed to export some sequences using Adobe Media Encoder CS4 (I wanted to rescue my work), but when I have to select the sequences that I want to export, it says that there is a problem with Adobe Dynamic Link.
Any idea for rescue the file?
Thanks!
Jordi

function(){return A.apply(null,[this].concat($A(arguments)))}
enrage222 wrote:
which question? the 9 dots?
Go directly to http://premierepro.wikia.com/wiki/Troubleshooting
Read and follow all instructions for troubleshooting
Report back with the answers to the questions at the end of that link

Problem with Adobe X Pro when scanning horizontal tables

Similar Messages

Maybe you are looking for