Problem with 'Advance' entry

Griends,
I am getting this strange problem. Does it happens with you also? Any solution..
The problem is as follows;
1. Transaction PR05
2. Enter only advance and save it with status Request Recorded/To Be Settled.
3. OPen the trip again, Simulate, the advance is visiable.
4. Click the 'Advance' tab.
5. As soon as you open the advance tab, the advance amount is grayed out (disabled)
6. Simulate now and the advance is shown as 0.
You see, only clickig the 'Advance' tab cause the adance to be ignored.
Regars!

Thanks Raynad,
The poblem is solved now. Actually the problem was due the field 'Settlement amount' in Advance tab, which I made hidden. Upon clicking the 'Advance' tab, the system was moving 0 to this field. When I made this field visiable (still no input allowed), it started getting the corect valuse. I still feel it's a bug. Even if the field is not visible, it should contain coect value.
Regads...

Similar Messages

Problem with 0014 entry

Hi,
I am having some problem with the entry in 0014. system is not permitting me to enter payment model and interval details
I have defined payment model and periodicity in IMG and also i have defined MODDE. But when i am entering the details (payment model, payment period and intervel) in 0014 it is not accepting.
I appreciate your support.
I have checked t512z and the permissibility is for several times.
as per the requirement, we have to pay x amount to employees on quarterly basis.
Thanks
Yogi

Hi,
I have found the solutioin.
Thanks
Yogi

Problem with Advanced Routing in WRT320N

Hi, everybody.
First of all, sorry for my poor English.
I've a problem with Advanced Routing in router. My provider using routing and it looks like that:
route add -p 172.16.2.0 mask 255.255.255.0 10.1.0.2
route add -p 172.16.5.0 mask 255.255.255.0 10.1.0.2
route add -p 10.0.0.0 mask 255.0.0.0 10.1.0.2
Everything is working well in XP (or other OS), but then I try to setup a Routing in router:
1.
2.
I'm realy tired to flashing and reflashing between 1.00.02 and 1.00.03, changing browsers, and hard reseting.
Anybody'll gimme a shot trick to my tired brains?
Solved!
Go to Solution.

1. Yes.
2. netstat:
C:\Users\dan>netstat -rn
===========================================================================
Список интерфейсов
31...........................inet
12...00 40 f4 76 95 bd ......VIA Rhine III Fast Ethernet адаптер
11...00 1d 92 2c 23 02 ......Realtek RTL8168B/8111B Family PCI-E Gigabit Ethern
et NIC (NDIS 6.20)
1...........................Software Loopback Interface 1
15...00 00 00 00 00 00 00 e0 Адаптер Microsoft 6to4 #2
21...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP #2
13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
14...00 00 00 00 00 00 00 e0 Адаптер Microsoft 6to4
19...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP #3
18...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP
16...00 00 00 00 00 00 00 e0 Адаптер Microsoft 6to4 #3
20...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP #4
===========================================================================
IPv4 таблица маршрута
===========================================================================
Активные маршруты:
Сетевой адрес Маска сети Адрес шлюза Интерфейс Метрика
0.0.0.0 0.0.0.0 10.1.0.2 10.1.3.42 4501
0.0.0.0 0.0.0.0 On-link 91.203.178.26 21
10.0.0.0 255.0.0.0 10.1.0.2 10.1.3.42 4246
10.1.0.0 255.255.0.0 On-link 10.1.3.42 4501
10.1.3.42 255.255.255.255 On-link 10.1.3.42 4501
10.1.255.255 255.255.255.255 On-link 10.1.3.42 4501
91.203.178.26 255.255.255.255 On-link 91.203.178.26 276
127.0.0.0 255.0.0.0 On-link 127.0.0.1 4531
127.0.0.1 255.255.255.255 On-link 127.0.0.1 4531
127.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
172.16.2.0 255.255.255.0 10.1.0.2 10.1.3.42 4246
172.16.2.10 255.255.255.255 10.1.0.2 10.1.3.42 4246
172.16.5.0 255.255.255.0 10.1.0.2 10.1.3.42 4246
224.0.0.0 240.0.0.0 On-link 127.0.0.1 4531
224.0.0.0 240.0.0.0 On-link 10.1.3.42 4502
224.0.0.0 240.0.0.0 On-link 91.203.178.26 21
255.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
255.255.255.255 255.255.255.255 On-link 10.1.3.42 4501
255.255.255.255 255.255.255.255 On-link 91.203.178.26 276
===========================================================================
Постоянные маршруты:
Сетевой адрес Маска Адрес шлюза Метрика
172.16.2.0 255.255.255.0 10.1.0.2 1
172.16.5.0 255.255.255.0 10.1.0.2 1
10.0.0.0 255.0.0.0 10.1.0.2 1
===========================================================================
IPv6 таблица маршрута
===========================================================================
Активные маршруты:
Метрика Сетевой адрес Шлюз
16 1125 ::/0 2002:c058:6301::c058:6301
11 276 ::/0 fe80::f88b:9485:52cd:caaf
1 306 ::1/128 On-link
13 58 2001::/32 On-link
13 306 2001:0:4137:9e50:2846:3ccb:a434:4de5/128
On-link
16 1025 2002::/16 On-link
16 281 2002:5bcb:b21a::5bcb:b21a/128
On-link
11 276 fe80::/64 On-link
13 306 fe80::/64 On-link
13 306 fe80::2846:3ccb:a434:4de5/128
On-link
11 276 fe80::b9aa:b87b:89ea:fcdd/128
On-link
1 306 ff00::/8 On-link
13 306 ff00::/8 On-link
11 276 ff00::/8 On-link
===========================================================================
Постоянные маршруты:
Отсутствует
C:\Users\dan>
2. ipconfig:
C:\Users\dan>ipconfig /all
Настройка протокола IP для Windows
Имя компьютера . . . . . . . . . : druh
Основной DNS-суффикс . . . . . . :
Тип узла. . . . . . . . . . . . . : Гибридный
IP-маршрутизация включена . . . . : Нет
WINS-прокси включен . . . . . . . : Нет
Порядок просмотра суффиксов DNS . : mannet.lan
Адаптер PPP inet:
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : inet
Физический адрес. . . . . . . . . :
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
IPv4-адрес. . . . . . . . . . . . : 91.203.178.26(Основной)
Маска подсети . . . . . . . . . . : 255.255.255.255
Основной шлюз. . . . . . . . . : 0.0.0.0
DNS-серверы. . . . . . . . . . . : 91.190.68.2
91.203.177.4
NetBios через TCP/IP. . . . . . . . : Включен
Ethernet adapter lanHOME:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : VIA Rhine III Fast Ethernet адаптер
Физический адрес. . . . . . . . . : 00-40-F4-76-95-BD
DHCP включен. . . . . . . . . . . : Да
Автонастройка включена. . . . . . : Да
Ethernet adapter 1000LAN:
DNS-суффикс подключения . . . . . : mannet.lan
Описание. . . . . . . . . . . . . : Realtek RTL8168B/8111B Family PCI-E Gigab
it Ethernet NIC (NDIS 6.20)
Физический адрес. . . . . . . . . : 00-1D-92-2C-23-02
DHCP включен. . . . . . . . . . . : Да
Автонастройка включена. . . . . . : Да
Локальный IPv6-адрес канала . . . : fe80::b9aa:b87b:89ea:fcdd%11(Основной)
IPv4-адрес. . . . . . . . . . . . : 10.1.3.42(Основной)
Маска подсети . . . . . . . . . . : 255.255.0.0
Аренда получена. . . . . . . . . . : 17 октября 2009 г. 17:37:10
Срок аренды истекает. . . . . . . . . . : 18 октября 2009 г. 17:37:09
Основной шлюз. . . . . . . . . : fe80::f88b:9485:52cd:caaf%11
10.1.0.2
DHCP-сервер. . . . . . . . . . . : 172.16.2.2
IAID DHCPv6 . . . . . . . . . . . : 234888594
DUID клиента DHCPv6 . . . . . . . : 00-01-00-01-12-43-2B-71-00-1D-92-2C-23-02
DNS-серверы. . . . . . . . . . . : 172.16.2.2
Основной WINS-сервер. . . . . . . : 172.16.2.2
NetBios через TCP/IP. . . . . . . . : Включен
Туннельный адаптер Reusable Microsoft 6To4 Adapter:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft 6to4 #2
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер Reusable ISATAP Interface {543B8BBE-84D2-471B-B8FB-F73600B4A8
2B}:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP #2
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер Подключение по локальной сети* 5:
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
IPv6-адрес. . . . . . . . . . . . : 2001:0:4137:9e50:2846:3ccb:a434:4de5(Осно
вной)
Локальный IPv6-адрес канала . . . : fe80::2846:3ccb:a434:4de5%13(Основной)
Основной шлюз. . . . . . . . . :
NetBios через TCP/IP. . . . . . . . : Отключен
Туннельный адаптер 6TO4 Adapter:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft 6to4
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер isatap.mannet.lan:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . : mannet.lan
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP #3
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер isatap.{AE6B314F-94BA-478F-8751-74DEB5AB1888}:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер Подключение по локальной сети*:
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft 6to4 #3
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
IPv6-адрес. . . . . . . . . . . . : 2002:5bcb:b21a::5bcb:b21a(Основной)
Основной шлюз. . . . . . . . . : 2002:c058:6301::c058:6301
DNS-серверы. . . . . . . . . . . : 91.190.68.2
91.203.177.4
NetBios через TCP/IP. . . . . . . . : Отключен
Туннельный адаптер isatap.{8B513FFA-4355-406F-B999-1701EE42D5B9}:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP #4
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
3.
4. without privider's cable:
4. with provider's cable:

My iphone won't sync with outlook. Same problem with calendar entries

contacts added to my iphone 4 won't sync with outlook 2003 running on windows 7. Same problem with calendar entries.

same here. Have you received any answers?

Problem with Variable Entry Screen

Hello All,
We upgraded our development systems to NW2004s and came across the following issue:
All our Bex queries have restricted time characteristics with variables entries. When we execute a query it should pop-up the variable selection screen for us to enter the restriction values but the query is ignoring Variable restriction screen and taking into consideration everything. The same query works fine in Prod., which is still in 3.1.
Did anyone come across this situation kind of situation? It did not pop-up any type of error and we are in SPS10
Thanks in Advance,
Message was edited by:
bw expert online
Message was edited by:
bw expert online

We fixed the "Variable Screen not appearing" problem by adding following objects to our users.
1) Business Explorer - BEx Web Templates (NW 7.0+) S_RS_BTMP
2) Business Explorer - Individual Tools S_RS_TOOLS
3) Business Explorer - Data Access Services S_RS_DAS
Mark the message answered if this helps.

Problem with Advanced Healing Brush on LR 5

I am experiencing a problem with the Advanced Healing Brush on LR 5. Using, say, the Heal option, when I have marked the area I want to heal, and then move to the source I want to copy, I cannot get the colour of my selected source point to remove the heal spot.
I have looked at a number of tutorials and working comments on using this function, and I am pretty sure that I am following the correct procedure for using the Advanced Healing Brush. I have the same problem when I try to use the Cloning option - the colour just does not fill the area I want to fix.
Is there possibly a bug hanging around? Can anyone give me any possible solutions to my problem? I so want to try out this terrific new feature in LR 5.

Thanks for your response
I attach 2 screenshots
Screenshot1 - See the orange tip of a feather behind the kid's head - I want to remove this with the heal option in the Spot Removal tool
Screenshot2 - I have demarcated a piece of the feather with the spot tool and have chosen the source color of the wooden bench
I was expecting the demarcated area to have adopted the chosen source color, but it hasn't, by a long shot. I've tried evry which way to get it to work, but no luck.
I even tried using the Clone option, choosing the same source color and painting over the orange feather, but that also didn't work.
I look forward to your comments
Sorry - forgot to add the images
Message was edited by: mandav1023

Problems with Advanced Queueing...

Hi,
Has anyone used AQ through OCI?
We are having problems with OCISubscriptionRegister() the error reported back is 'two task conversions - overflow integer'. The code we are running is straight out of the published demos...
Please HELP!!
Thanks,
Darryl Schallig

There are discussion on this in the Advanced Queueing forum.

Problem with advanced threshold in OCR - Vision Assistant 2013

I'm facing a problem with Vision Assistant 2013
The OCR charter set file advanced threshold data is always fixed at 255 upper value and optimize for speed is checked.
I edit them and reopen the file but no change.
anyone facing the same problem ?
Attachments:
Untitled.png ‏7 KB

Hi Paolo,
Thanks for your answer. Yeah I have seen the examples and I´m familiar with the use of the OCR VI. I have use it a couple of time already with good results.
My problem came last week. While I was trying to run OCR on my image in my LabVIEW code. The algorithm did not detected what I was expecting.
I decided to run the test on the vision assistant and it worked perfectly. I assumed my code had different parameters, so I decided to generate a VI from the vision asssistant and run it on LabVIEW for the same image to verify.
I did not change anything on the VI (all parameters are the same), and used the same image. Surprinsingly the results are different between the assistant and the VI. That strikes me a lot!
I´ll start a new thread as you recommended. Hope to find the solution soon. Thanks
Regards,
Esteban

Problem with quick entry autofill for Things application

I use Firefox as my standard browser and the application Things for my task management. Until recently I could easily use the quick entry autofill function (ctrl alt space) to copy a link to a task in Things. This suddenly stopped working. I contacted Things support, thinking it was a problem with their application, but it appears Firefox is the culprit (that was found in the output from my Mac's console and I also found that in Safari the shortkey still works). I am updated to the latest version and would really like to keep using Firefox.
This was the output from my Mac's console:
27-10-14 18:10:00,766 Things Helper[268]: AppleScript execution error: NSAppleScriptErrorMessage = Firefox got an error: Can’t get «class curl» of window 1.
27-10-14 18:10:00,766 Things Helper[268]: AppleScript execution error: NSAppleScriptErrorRange = NSRange: {118, 12}
27-10-14 18:10:00,766 Things Helper[268]: AppleScript execution error: NSAppleScriptErrorBriefMessage = Can’t get «class curl» of window 1.
27-10-14 18:10:00,767 Things Helper[268]: AppleScript execution error: NSAppleScriptErrorNumber = -1728
27-10-14 18:10:00,767 Things Helper[268]: AppleScript execution error: NSAppleScriptErrorAppName = Firefox
I hope you can help me fix this problem.
Kind regards

The bug I found about Apple Script changing the read/write permissions of api was a dead end and looks like it is till waiting to be worked on [https://bugzilla.mozilla.org/show_bug.cgi?id=608049]
I am sorry I do not have any updates on this issue at this time.

Problem with advanced sidechaining in logic x

probably best i explain what i'm trying to do first!
I'm bussing 4 different audio tracks to bus 1 (for example) which has eq / compressor etc and outputs to the master and also to bus 2
bus 2 has a drastic high cut on it but has no output, it is intended to be used as a silent sidechain effector
bus 3 has a compressor set to sidechain to bus 2, but instead of sidechaining to the high cut signal, it uses the dry one.
i used to route the same thing the same way on logic 8 and 9 but on 10 i have encountered this problem, is there a setting i need to change or is it a problem with the softwar that i'll have to add extra busses to route around?
thanks!

When you send (or change the output) of a channel to a bus, an Aux is created automatically in the mixer for you. You can create more Auxes manually and set their inputs to the same bus # if you need to. For example you could create a submix of 4 gtrs by setting the output to bus 1. In the mixer you will now have an Aux with bus 1 as its input. You could create 2 more Auxes with bus 1 as their input. So you have 3 channels all with the exact same submix of gtrs. Now you could do some parallel processing: 1 Aux has distortion, 1 Aux is clean, etc. Say you wanted to filter the crap out of the gtr submix and use it for a sidechain on something else, you take your third Aux and put your crazy filter on it, and change its output to Bus 2. A new Aux is created, but you can either delete it or change its output to none. Whatever you want to listen to the crazy filter in its sidechain listens to bus 2, where that filter has been sent (from the 3rd aux above).
I'm bussing 4 different audio tracks to bus 1 (for example) which has eq / compressor etc and outputs to the master and also to bus 2
Does the AUX output to Master & send to Bus 2? or is it bad grammar (not criticizing) and you mean the 4 audio tracks also go to Bus 2?
bus 2 (You mean an AUX with bus 2 as its input) has a drastic high cut on it but has no output, it is intended to be used as a silent sidechain effector
OK so far
bus 3 has a compressor set to sidechain to bus 2, but instead of sidechaining to the high cut signal, it uses the dry one.
I think what you want is to set the output of the AUX with the high cut to an open bus, and use that as the sidechain for whatever is on what "bus 3" is.
Maybe think of it like this: busses are pathways, they can even be potential pathways. If you send something to a bus it's like you plugged in a cord to a jack. The other end of that cord might not be plugged into anything. Or it might be plugged into the sidechain of a compressor, or an AUX channel. In Logic's virtual world, that cord is like a Y jack with, like, 250 ends on it. If you plug one of those ends into a filter, and one into an AUX channel, and one into a sidechain, the sidechain isn't going to hear what came from the filter. You need another cord (bus) to come out of the filter and then into the sidechain.
If you want to be 'clean and conservative' with your busses (and who doesn't in this economy?), you could skip the intermediate bus/channel. Unless the compression is critical to the silent sidechain signal, you could skip sending the compressed signal to bus 2. Change the input of the drastic high cut channel to Bus 1, and set its output to Bus 2, Make sure no AUXes are there with Bus 2 as their input.

Problems with Calender Entries from Exchange Server

I think this just started on Friday or Saturday--
I opened my calender on my iPhone and it seemed a little empty. I noticed that a couple of appointments that I know should be there are not. I restarted the iPhone thinking there was some kind of transient glitch and some (not all) of my missing items appeared. Then disappeared. Then appeared. Then disappeared. Then they stayed gone. Every time I open my calender now, that happens.
It seems that the items that stay put are the ones that I put directly into my iPhone. Many others come and go, and some never show up at all.
Thankfully, my Outlook calender seems to be in good shape, although the new items I have put into my phone since Saturday have not synced.
And my contacts sync with no problem, too. It's just the calender. Any help would be appreciated.
Rick

We have a similar problem with one VP's iPhone in our environment. Did some testing today and discovered the following:
* When an appointment is sent to the VP and he accepts the appointment from his iPhone, all seems well, meaning that the appointment is visible both on his computer's Outlook and on his iPhone calendar.
* When an appointment is sent to the VP and he accepts it from his computer's Outlook, it still appears as a "new invitation" on his iPhone and, if he does not respond right away from his iPhone, that appointment disappears from his iPhone. It remains on his Outlook calendar. These missing appointments on his iPhone cause scheduling problems for us, as you can imagine!
So, my question is: how must one handle Outlook appointment schedule acceptance? Further complicating our situation is that this VP has a delegate who accepts appointments on his behalf. We're never quite confident whether his iPhone accurately reflects his actual appointment schedule.
Please help! Thank you!
Teija

Problem with data entry profile ESS ?

Hey All,
My problem is i have a data entry profile "ESS".
In CAT2 transaction i see the ESS data entry profile as follows (suppose)
<b>A1 A2 A3 Mon Tue Wed .... Sat Sun A4</b>
I assigned CVR parameter to this profile
Now in ESS i see the data entry section as
<b>A1 A2 A3 A4 Mon Tue Wed ......Sat Sun</b>
The order of the fields is getting sorted.
Is it anything to do with the settings you referred earlier?
Sriram

Hello all,
can anyone help me on this , iam being stuck on this for a quite a long time
Regards
sriram

Problem with No entry in table T591B for 0015 08 E101

Hi all,
This is our first year using SAP and we're approaching our first Year End and so want to make the E Wage Types available for us in IT0015, E121 is already OK and I can enter data in IT0015 for that WT no problem. I've added WT E101 to the 0015 Additional Payments in the IMG and it shows as being allowed for IT0015, this has created entries in the Permissability, etc. in the IMG and I've updated permisability for the ESG to allow for all ESG / PS, etc. - so all looks fine when I work through the steps for Additional Payments in the IMG, but when I try to save E101 in IT0015 I get a message about 'No entry in table T591B for 0015 08 E101' .
When I look at this table it's called 'WT dependent retroactive accounting trigger' and I've not seen it before despite setting up many Wage Types and I can see E121 is in this table but E101 isn't - but I can't see how I can add or copy anything in this table - there are no options. So I'm assuming this is usually auto updated by creating an entry in another table but I have no idea how to find where and can't find any documentation or other forum messages for this table.
Has anyone else come accross this before or know anything about this table - has anyone else had trouble when wanting to allow E Wage Types to be used for Year End adjustments?
Thanks in advance for any advice anyone can give me
Nyree

Olnly wt configured to be permissibled on a few infotypes (e.g. 0014, 0015, 0267) would need to be configured in V_T591B. The purpose of this is to control whether these wt are allowed to be changed after payroll is already run for the ee.
All you need to do is maintain this entry through view V_T591B - add entry for wt 'E101' for infotype 0015 / country '08'. The indicator (V5591B-ABWRU) can be '' (allow change to wt after proll is run), 'X' (warning if change after proll is run), 'E' (hard-error if change after payroll is run) .
Rgds.

Problem with Text Entry BoX in Adobe Captivate 6

I could not enter correct responses for my text entry box. Plus, the "success" and " failure" options were greyed out for me under properties>options.
I notice my icon is IAB for text entry box, whereas some users have a placeholder sign for the icon.

This is very strange, even when not validated you should have at least the Success option in the Properties panel. If it is not validated you are left only with the Success event, that can fire an action when the Submit button for the TEB is pressed (or the shortcut key is used). You cannot be working on a master slide, because it is not possible to insert a TEB there. Please, post a screenshot of the stage with the properties panel, actions accordion.
http://blog.lilybiri.com/events-and-advanced-actions
Lilybiri

Problem with Advanced queueing

Hi,
I'm having the folowing problem:
I'm trying to implement the Monitor feature from within VB. I used the sample code posted in: re:Rollback segments and odbc and VC++
I created the class with the method NotifyMe, just as described.
When I try to start the monitor, I get the following VB-error:
Runtime error: -2147213295 (80042011)
Method 'MonitorStart' of object '_IOraAQ' failed.
I can't seem to find the problem, am I doing something wrong?
B.t.w., normal sending and receiving works fine.
We are using oracle database 8.1.7.0.0
CLient: 9.0.1.0.1
OO4O: 9.0.1.4.3
Thanks in advance for your help!
Kind regards,
Leon

Did you grant execute on DBMS_AQJMS and DBMS_AQIN?

Problem with 'Advance' entry

Similar Messages

Maybe you are looking for