Problem with Advanced Routing in WRT320N

Hi, everybody.
First of all, sorry for my poor English.
I've a problem with Advanced Routing in router. My provider using routing and it looks like that:
route add -p 172.16.2.0 mask 255.255.255.0 10.1.0.2
route add -p 172.16.5.0 mask 255.255.255.0 10.1.0.2
route add -p 10.0.0.0 mask 255.0.0.0 10.1.0.2
Everything is working well in XP (or other OS), but then I try to setup a Routing in router:
1.
2.
I'm realy tired to flashing and reflashing between 1.00.02 and 1.00.03, changing browsers, and hard reseting.
Anybody'll gimme a shot trick to my tired brains?
Solved!
Go to Solution.

1. Yes.
2. netstat:
C:\Users\dan>netstat -rn
===========================================================================
Список интерфейсов
31...........................inet
12...00 40 f4 76 95 bd ......VIA Rhine III Fast Ethernet адаптер
11...00 1d 92 2c 23 02 ......Realtek RTL8168B/8111B Family PCI-E Gigabit Ethern
et NIC (NDIS 6.20)
1...........................Software Loopback Interface 1
15...00 00 00 00 00 00 00 e0 Адаптер Microsoft 6to4 #2
21...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP #2
13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
14...00 00 00 00 00 00 00 e0 Адаптер Microsoft 6to4
19...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP #3
18...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP
16...00 00 00 00 00 00 00 e0 Адаптер Microsoft 6to4 #3
20...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP #4
===========================================================================
IPv4 таблица маршрута
===========================================================================
Активные маршруты:
Сетевой адрес Маска сети Адрес шлюза Интерфейс Метрика
0.0.0.0 0.0.0.0 10.1.0.2 10.1.3.42 4501
0.0.0.0 0.0.0.0 On-link 91.203.178.26 21
10.0.0.0 255.0.0.0 10.1.0.2 10.1.3.42 4246
10.1.0.0 255.255.0.0 On-link 10.1.3.42 4501
10.1.3.42 255.255.255.255 On-link 10.1.3.42 4501
10.1.255.255 255.255.255.255 On-link 10.1.3.42 4501
91.203.178.26 255.255.255.255 On-link 91.203.178.26 276
127.0.0.0 255.0.0.0 On-link 127.0.0.1 4531
127.0.0.1 255.255.255.255 On-link 127.0.0.1 4531
127.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
172.16.2.0 255.255.255.0 10.1.0.2 10.1.3.42 4246
172.16.2.10 255.255.255.255 10.1.0.2 10.1.3.42 4246
172.16.5.0 255.255.255.0 10.1.0.2 10.1.3.42 4246
224.0.0.0 240.0.0.0 On-link 127.0.0.1 4531
224.0.0.0 240.0.0.0 On-link 10.1.3.42 4502
224.0.0.0 240.0.0.0 On-link 91.203.178.26 21
255.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
255.255.255.255 255.255.255.255 On-link 10.1.3.42 4501
255.255.255.255 255.255.255.255 On-link 91.203.178.26 276
===========================================================================
Постоянные маршруты:
Сетевой адрес Маска Адрес шлюза Метрика
172.16.2.0 255.255.255.0 10.1.0.2 1
172.16.5.0 255.255.255.0 10.1.0.2 1
10.0.0.0 255.0.0.0 10.1.0.2 1
===========================================================================
IPv6 таблица маршрута
===========================================================================
Активные маршруты:
Метрика Сетевой адрес Шлюз
16 1125 ::/0 2002:c058:6301::c058:6301
11 276 ::/0 fe80::f88b:9485:52cd:caaf
1 306 ::1/128 On-link
13 58 2001::/32 On-link
13 306 2001:0:4137:9e50:2846:3ccb:a434:4de5/128
On-link
16 1025 2002::/16 On-link
16 281 2002:5bcb:b21a::5bcb:b21a/128
On-link
11 276 fe80::/64 On-link
13 306 fe80::/64 On-link
13 306 fe80::2846:3ccb:a434:4de5/128
On-link
11 276 fe80::b9aa:b87b:89ea:fcdd/128
On-link
1 306 ff00::/8 On-link
13 306 ff00::/8 On-link
11 276 ff00::/8 On-link
===========================================================================
Постоянные маршруты:
Отсутствует
C:\Users\dan>
 2. ipconfig:
C:\Users\dan>ipconfig /all
Настройка протокола IP для Windows
Имя компьютера . . . . . . . . . : druh
Основной DNS-суффикс . . . . . . :
Тип узла. . . . . . . . . . . . . : Гибридный
IP-маршрутизация включена . . . . : Нет
WINS-прокси включен . . . . . . . : Нет
Порядок просмотра суффиксов DNS . : mannet.lan
Адаптер PPP inet:
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : inet
Физический адрес. . . . . . . . . :
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
IPv4-адрес. . . . . . . . . . . . : 91.203.178.26(Основной)
Маска подсети . . . . . . . . . . : 255.255.255.255
Основной шлюз. . . . . . . . . : 0.0.0.0
DNS-серверы. . . . . . . . . . . : 91.190.68.2
91.203.177.4
NetBios через TCP/IP. . . . . . . . : Включен
Ethernet adapter lanHOME:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : VIA Rhine III Fast Ethernet адаптер
Физический адрес. . . . . . . . . : 00-40-F4-76-95-BD
DHCP включен. . . . . . . . . . . : Да
Автонастройка включена. . . . . . : Да
Ethernet adapter 1000LAN:
DNS-суффикс подключения . . . . . : mannet.lan
Описание. . . . . . . . . . . . . : Realtek RTL8168B/8111B Family PCI-E Gigab
it Ethernet NIC (NDIS 6.20)
Физический адрес. . . . . . . . . : 00-1D-92-2C-23-02
DHCP включен. . . . . . . . . . . : Да
Автонастройка включена. . . . . . : Да
Локальный IPv6-адрес канала . . . : fe80::b9aa:b87b:89ea:fcdd%11(Основной)
IPv4-адрес. . . . . . . . . . . . : 10.1.3.42(Основной)
Маска подсети . . . . . . . . . . : 255.255.0.0
Аренда получена. . . . . . . . . . : 17 октября 2009 г. 17:37:10
Срок аренды истекает. . . . . . . . . . : 18 октября 2009 г. 17:37:09
Основной шлюз. . . . . . . . . : fe80::f88b:9485:52cd:caaf%11
10.1.0.2
DHCP-сервер. . . . . . . . . . . : 172.16.2.2
IAID DHCPv6 . . . . . . . . . . . : 234888594
DUID клиента DHCPv6 . . . . . . . : 00-01-00-01-12-43-2B-71-00-1D-92-2C-23-02
DNS-серверы. . . . . . . . . . . : 172.16.2.2
Основной WINS-сервер. . . . . . . : 172.16.2.2
NetBios через TCP/IP. . . . . . . . : Включен
Туннельный адаптер Reusable Microsoft 6To4 Adapter:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft 6to4 #2
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер Reusable ISATAP Interface {543B8BBE-84D2-471B-B8FB-F73600B4A8
2B}:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP #2
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер Подключение по локальной сети* 5:
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
IPv6-адрес. . . . . . . . . . . . : 2001:0:4137:9e50:2846:3ccb:a434:4de5(Осно
вной)
Локальный IPv6-адрес канала . . . : fe80::2846:3ccb:a434:4de5%13(Основной)
Основной шлюз. . . . . . . . . :
NetBios через TCP/IP. . . . . . . . : Отключен
Туннельный адаптер 6TO4 Adapter:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft 6to4
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер isatap.mannet.lan:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . : mannet.lan
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP #3
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер isatap.{AE6B314F-94BA-478F-8751-74DEB5AB1888}:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер Подключение по локальной сети*:
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft 6to4 #3
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
IPv6-адрес. . . . . . . . . . . . : 2002:5bcb:b21a::5bcb:b21a(Основной)
Основной шлюз. . . . . . . . . : 2002:c058:6301::c058:6301
DNS-серверы. . . . . . . . . . . : 91.190.68.2
91.203.177.4
NetBios через TCP/IP. . . . . . . . : Отключен
Туннельный адаптер isatap.{8B513FFA-4355-406F-B999-1701EE42D5B9}:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP #4
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
3. 
4. without privider's cable:
4. with provider's cable:

Similar Messages

  • Problems with Advanced Routing using two links

    Hello Guys
    I have ths following situation
    On my notebook i'm connected through wlan0 to my router and also connected through usb0 to my mobile phone 3g
    This is what i want to do:
    The ports of torrents and emule uses usb0
    All the rest (80, 443, 25, 143, 22, etc) uses wlan0
    So im going to have one link dedicated to my downloads and another to the rest.
    Useful info:
    ip wlan0: 192.168.1.100
    gw wlan0: 192.168.1.1
    ip usb0: 192.168.100.100
    gw usb0: 192.168.100.254
    Here is what I'm doing
    I created a table called 3g on /etc/iproute2/rt_tables
    Then
    iptables -t mangle -A POSTROUTING -p tcp --dport 51413 -j MARK --set-mark 2
    ip route add default via 192.168.100.254 dev usb0 table 3g
    ip rule add fwmark 2 table 3g
    ip route flush cache
    It doesn't work, if I set another rule on ip rule like:
    ip rule add to SOME_IP lookup 3g
    When I access SOME_IP it uses the usb0 link as it should
    But the packages that uses the port 51413 doesn't goes out through usb0
    I checked it using bwm-ng and iptables -t mangle POSTROUTING -nvL (few packages are getting the mark 2) so I think the error it's here
    Does anyone knows what could it be?
    Thank you,
    Wagner
    Last edited by Brief (2010-05-10 02:40:15)

    Brief wrote:I'm going to try this script in perl fukawi2, as soon as I have time to it, thanks for sharing
    No problem -- please do give any feedback on problem you find so I can fix them up

  • I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

    I need advise and help with this problem .
    First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
    At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
    In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
    Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
    trace in Spotlight , Library . Nothing could be find .
    Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
    ''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
    With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
    I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
    Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

    Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
    To remove it, see:
    http://www.thesafemac.com/arg-genieo/
    Do not use the Genieo uninstaller!

  • Problem with rg60se router

    I have problem with this router, when I connect to the internet wirelessly it works fine but when I try to connect my pc to router via cable I can't connect to the internet. maybe someone can help with this problem.

                         >> Posting Guide <<

  • Problems with Wireless Router and Adapter

    I tried posting this in the wireless adapter forum but nobody responded :-(
    I'm using a WRT54G Router btw, and the firmware is v2.02.7, Feb. 27, 2004.
    Hi everyone,
    I have a Linksys Wireless G Router and several computers that I try to connect with. One of them is a computer running Windows XP and using a Linksys Wireless USB B Adapter (WUSB11). Another is a laptop running Mandriva Linux using a Linksys Instant Wireless Network PC Card (WPC11). Another one is running Windows Vista and using a Linksys Wireless N card. I also have a laptop running Windows XP using a Linksys Wireless-G Notebook Adapter (WPC54G).  I also have another PC running Windows XP and uses a Linksys Wireless USB Adapter WUSB54G. Finally, I have two macintosh laptops running OSX and with airport devices installed.
    Anyway, I have problems with my internet connection frequently being interrupted and even sometimes I won't have a connection at all for hours. This occurs with my Linux laptop, the PC with the Wireless B Adapter, and the laptop using the Wireless G Notebook Adapter. In addition to this, the macintosh laptops have internet even more infrequently. However, I seem to never have a problem with the Windows Vista desktop or the Windows XP desktop that has the Wireless G adapter. I try repairing the connection and often it does not work. I have also tried resetting the router and the cable modem. I'm not sure what else I can do. I even bought a Wireless N router and had little success with that. We even went as far as moving the wireless router upstairs into our living room, thinking that the signal was somehow suffering from interference or that distance was a factor. Anyway, sorry for the long post but I could really use some help!
    Thanks.

    Hi… logon to wireless N router’s setup page, open I.E. an in the address bar type 192.168.1.1 it would ask for username and password, put "admin" as a paassword (default password) without any username...linksys setup pops up, click on on wireless tab and and try changing radio band to wide 40MHz, wide channel to 9 and wireless standard channel to 1 or 11, go to advanced wireless settings reduce beacon interval to 50, fragmentation and RTS threshold to 2304, change N Transmission rate to 270 MBps…also try upgrading latest firmware on router, check whether it makes any difference or not and let me know.

  • Problem with Advanced Healing Brush on LR 5

    I am experiencing a problem with the Advanced Healing Brush  on LR 5. Using, say, the Heal option, when I have marked the area I want to heal, and then move to the source I want to copy, I cannot get the colour of my selected source point to remove the heal spot.
    I have looked at a number of tutorials and working comments on using this function, and I am pretty sure that I am following the correct procedure for using the Advanced Healing Brush. I have the same problem when I try to use the Cloning option - the colour just does not fill the area I want to fix.
    Is there possibly a bug hanging around?  Can anyone give me any possible solutions to my problem?  I so want to try out this terrific new feature in LR 5.

    Thanks for your response
    I attach 2 screenshots
    Screenshot1  - See the orange tip of a feather behind the kid's head - I want to remove this with the heal option in the Spot Removal tool
    Screenshot2 - I have demarcated a piece of the feather with the spot tool and have chosen the source color of the wooden bench
    I was expecting the demarcated area to have adopted the chosen source color, but it hasn't, by a long shot. I've tried evry which way to get it to work, but no luck.
    I even tried using the Clone option, choosing the same source color and painting over the orange feather, but that also didn't work.
    I look forward to your comments
    Sorry - forgot to add the images
    Message was edited by: mandav1023

  • Problem with Port Forwarding in WRT320N

    Good day.
    I have a web-server and Internet-radio translator to local network of my provider. And I found a problem with Port Forwarding. I'm trying to setup 80 & 8000 ports to forward. And it's working but only for Internet, without provider's local network. My web-server isn't accessible in local network and radio-translator too. 
    So is it possible to forward ports absolutely - for any type of connections? 
    P.S. DMZ is working like Port Forwarding.

    If you ask questions you have to mention that you have an PPTP connection to the internet and another network directly on the internet port. Otherwise noone will really understand your question as it is a very unusual setup.
    Your setup is not one really supported by the router. You are lucky that it works but don't expect too much. Port forwarding only the internet connection. If you use PPTP the network on the internet port is basically hidden. Using that local network on the internet port is not supported.
    The DMZ host is the IP address to which all ports are forwarded to which are not forwarded otherwise. The same restriction applies here.
    I would recommend to ask your ISP which router they recommend for their internet connection. I think most/all Linksys routers and many other brand's consumer routers won't really support a setup like yours...

  • Connection problems with WRT54G Router PLEASE HELP!!!!

    Hello all,
    Im having a huge issue and im hoping that someone can help me. Awhile ago i changed what i believe to be my router settings using 192.168.1.1 and i believe i added WEP secuirty. I changed my password i know that much. Anyway my problem is this - When i try connecting a router to my computer, i cannot access the internet OR the 192.168.1.1 setup. I just get a yellow caution sign on my wireless settings (running Windows 7), but when i connect my cable modem (Comcast) to my computer, i can access the internet. I have reset both the router and my cable modem MANY times (hard resets) and STILL cannot get the setup page for the router. I have TWO WRT54G rourters and BOTH do the same thing when connected to my desktop , yet BOTH work fine on an old machine running XP, so it is something i did with this computer. Can someone please help me solve this issue? any hlep would be appreciated as i am stumped and do not know how to fix this and cannot use WI-FI or my Xbox 360 until i can fix this..Thanks.

    Check the IP address of your computer and see if it's in range with the router's IP.
    To learn how to do so, click here.

  • Problems with Advanced Queueing...

    Hi,
    Has anyone used AQ through OCI?
    We are having problems with OCISubscriptionRegister() the error reported back is 'two task conversions - overflow integer'. The code we are running is straight out of the published demos...
    Please HELP!!
    Thanks,
    Darryl Schallig

    There are discussion on this in the Advanced Queueing forum.

  • Problem with advanced sidechaining in logic x

    probably best i explain what i'm trying to do first!
    I'm bussing 4 different audio tracks to  bus 1 (for example) which has eq / compressor etc and outputs to the master and also to bus 2
    bus 2 has a drastic high cut on it but has no output, it is intended to be used as a silent sidechain effector
    bus 3 has a compressor set to sidechain to bus 2, but instead of sidechaining to the high cut signal, it uses the dry one.
    i used to route the same thing the same way on logic 8 and 9 but on 10 i have encountered this problem, is there a setting i need to change or is it a problem with the softwar that i'll have to add extra busses to route around?
    thanks!

    When you send (or change the output) of a channel to a bus, an Aux is created automatically in the mixer for you.  You can create more Auxes manually and set their inputs to the same bus # if you need to.  For example you could create a submix of 4 gtrs by setting the output to bus 1.  In the mixer you will now have an Aux with bus 1 as its input.  You could create 2 more Auxes with bus 1 as their input.  So you have 3 channels all with the exact same submix of gtrs.  Now you could do some parallel processing:  1 Aux has distortion, 1 Aux is clean, etc.  Say you wanted to filter the crap out of the gtr submix and use it for a sidechain on something else, you take your third Aux and put your crazy filter on it, and change its output to Bus 2.  A new Aux is created, but you can either delete it or change its output to none.  Whatever you want to listen to the crazy filter in its sidechain listens to bus 2, where that filter has been sent (from the 3rd aux above).
    I'm bussing 4 different audio tracks to  bus 1 (for example) which has eq / compressor etc and outputs to the master and also to bus 2
    Does the AUX output to Master & send to Bus 2?  or is it bad grammar (not criticizing) and you mean the 4 audio tracks also go to Bus 2?
    bus 2 (You mean an AUX with bus 2 as its input) has a drastic high cut on it but has no output, it is intended to be used as a silent sidechain effector
    OK so far
    bus 3 has a compressor set to sidechain to bus 2, but instead of sidechaining to the high cut signal, it uses the dry one.
    I think what you want is to set the output of the AUX with the high cut to an open bus, and use that as the sidechain for whatever is on what "bus 3" is.
    Maybe think of it like this:  busses are pathways, they can even be potential pathways.  If you send something to a bus it's like you plugged in a cord to a jack.  The other end of that cord might not be plugged into anything.  Or it might be plugged into the sidechain of a compressor, or an AUX channel.  In Logic's virtual world, that cord is like a Y jack with, like, 250 ends on it.  If you plug one of those ends into a filter, and one into an AUX channel, and one into a sidechain, the sidechain isn't going to hear what came from the filter.   You need another cord (bus) to come out of the filter and then into the sidechain.
    If you want to be 'clean and conservative' with your busses (and who doesn't in this economy?), you could skip the intermediate bus/channel.  Unless the compression is critical to the silent sidechain signal, you could skip sending the compressed signal to bus 2.  Change the input of the drastic high cut channel to Bus 1, and set its output to Bus 2,  Make sure no AUXes are there with Bus 2 as their input.

  • Problem with advanced threshold in OCR - Vision Assistant 2013

    I'm facing a problem with Vision Assistant 2013
    The OCR charter set file advanced threshold data is always fixed at 255 upper value and optimize for speed is checked.
    I edit them and reopen the file but no change.
    anyone facing the same problem ?
    Attachments:
    Untitled.png ‏7 KB

    Hi Paolo,
    Thanks for your answer. Yeah I have seen the examples and I´m familiar with the use of the OCR VI. I have use it a couple of time already with good results.
    My problem came last week. While I was trying to run OCR on my image in my LabVIEW code. The algorithm did not detected what I was expecting.
    I decided to run the test on the vision assistant and it worked perfectly. I assumed my code had different parameters, so I decided to generate a VI from the vision asssistant and run it on LabVIEW for the same image to verify.
    I did not change anything on the VI (all parameters are the same), and used the same image. Surprinsingly the results are different between the assistant and the VI. That strikes me a lot!
    I´ll start a new thread as you recommended. Hope to find the solution soon. Thanks  
    Regards,
    Esteban

  • Pb with advanced routing - RV082

    Hi,
    I got a problem to configure the static routing in advanced routing options : i fill in all the fields, including destination ip (192.168.1.10). When i add it to the list, all is ok, but when i clic on save or come back in this menu, the destination ip change to 192.168.1.0 !! I got the latest firmware, is there any way to fix it ?
    Thanks

    Post to the B1 forums

  • Problems with WRT350N Router

    I have had a WRT350N router since they first came out and have had the same problems with it the entire time. I have 2 systems with static IP's, 1 wireless B (dhcp) 2 wireless G (DHCP), and 4 wired devices. (1 Gigabit, 1 10 Base, and 2 100 Base)
    1. After the unit has been powered on for a while (a day or so) The DHCP server quits giving IP addresses. (DHCP server unreachable messages)
    2. Unable to use the restore config feature. (file uploads and seems to apply yet no changes are actually made.)
    3. QOS locks up router. If I try to set up QOS the router has to be reset to factory defaults.
    I have kind-of just dealt with it, but the DHCP thing is really bothersome. I have to go in the room with all of my network equipment and power cycle the thing to get an internet connection, that raises the possibility that I will have to reset the other devices.

    I am seriously reconsidering returning my WRT350N for another N-based router.   The current firmware is not stable.   I have had a WRT54G V1 and WRT54G V5 for years and never had a signel issue.    Just to make sure I didn't get a bad unit I returned for another so I know it isn't hardware related.
    1) DDNS not updating.  This has always worked on my WRT54G's without issue
    2) XBOX 360 wouldn't stay connect to Live.   Changing MTU size seems to 1365 make more stable
    3) Storage support works for a while and then stops or randomly freezes unit.  
    4) FTP changes require unit to be manually rebooted for changes to take effect.
    Really hope a new firmware release is soon.  I love the features of the 350N but
    it is not a very stable router at this point.   If DD-WRT releases a firmware that has the storage gui enabled might take a look there but at this point I am frustrated with the unit.
    Message Edited by GAH1068 on 03-30-200707:02 AM
    Message Edited by GAH1068 on 03-30-200707:02 AM

  • Problems With Linux Router

    I have a RaspberryPi and I want to turn it into a router just for the hell of it. I've attempted this multiple times but always get stuck and say "screw it" since my roommates would bitch at me because they can't get on the internet. Now I live by myself and want to get it to work.
    I've followed the Router page in the wiki but I only have internet access from the Pi itself. I had a few problems but I think I fixed them. My main problem now is that DHCP doesn't offer IP addresses. During bootup Arch tells me that it failed to start my private interface (eth0), while looking at the journal it says this because the interface is already up (don't know why) and it doesn't get an ip address. I would like to assign it a static address of 192.168.1.1 but I'm not sure how to do so.
    If I set a static address for eth0 (my internal interface) and try to get an IP address from another computer it doesn't offer me one. If I set a static address on the other PC, I can ping the Pi from the PC and vice versa so I know that's good, but if I try to ping an external IP from the PC (such as Google's DNS server 8.8.8.8 which responds to pings) it gives me "destination host unreachable", yet I can ping it just fine from the Pi.
    I'm using a Cisco E3200 router with Tomate by Shibby as a switch and WAP with the routing/DHCP/DNS features turned off. I don't believe that the E3200 is the problem.
    Any suggestions on why this isn't working?
    Last edited by brando56894 (2013-09-18 05:08:23)

    Thanks for the info, but I need to get DHCP working since I'm going to have a few other devices on the network that won't have static address (phones, tablets, friend's devices, etc...).
    Lone_Wolf wrote:Off-topic :  Don't think OP's problem is due to the different architecture, but deciding such things is part of the moderators job.
    I was going to say that too, but I didn't want to poke the bear. My problems aren't really architecture dependent, they're just general networking problems.
    Last edited by brando56894 (2013-09-18 17:57:36)

  • Connection problem with EA3500 router

    System consists of cable modem connected to EA3500 dual router and also have a Linksys range extender.  Have several wireless devices including desktop PC, cell phones, and tablets that all connect to wireless network without any problem.  Have password set up on system.  Having a problem with one Acer laptop - when I view my wireless connections I can see HOME and HOME-EXT and it will connect fine with the EXT (range extender) signal but will not connect with the base router that is shown as HOME even though the home connection shows a stronger signal that the ext link.  Have checked to make sure that router password is correct - laptop will sometimes connect to HOME for a few seconds and then display "limited connection"
    No problems with wireless connections with any other devices.  Have rebooted everything in the system with no luck.
    Have also tried deleting HOME connection and then reconnecting it.
    Any suggestions?
    Thanks for any help that anyone may offer.

    On the laptop did you try to forget the HOME network and reconnect?
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

Maybe you are looking for