Problem with AE CS5 and laptop screen resolution during install..

Hello everyone,
I bought AE and I am very disappointed. When I went to install the application, I got the following errors and it stopped installing.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 54 error(s), 52 warning(s)
WARNING: Display requirements not met for {DA1B174B-4297-467C-9EF8-0AB8D4D5171E}
WARNING: Payload cannot be installed due to dependent operation failure
My max screen resolution is 1366x768 and the requirement is 1280x1024.
I don't plan on buying a screen that large. Is there a fix for this? perhaps editing the registry? I won't mind the small work area. I can manage. does AE CS4 have this resolution requirement? I have an opengl capable graphics card in my laptop so I don't think that is an issue here. any help would be much appreciated. thanks

ok I think I was able to bypass the " Display requirements not met for {DA1B174B-4297-467C-9EF8-0AB8D4D5171E}" error during install. I hooked up an exteral monitor with the required resolution and I did not see that error message again. However, I am still getting the following error messages
<code>
WARNING: Payload cannot be installed due to dependent operation failure
</code>
could it be that my graphics card does not support opengl? how can I make sure it supports opengl 2.0?
the graphics card that I have is an integraded intel media graphics accelerator. I am quite sure it would support opengl2.0. any thoughts? thanks
My brother has a screen resolution of 1240x780 and yet he was able to install AE CS5 without any errors at all. He has an ATI mobility Raedon Graphics card. whats up with that? also, he cannot hear any sound from avi videos in AE. He has tried everything even raising the decibals level in the track.

Similar Messages

Problem with AI cs5 and windows7

Hi
I had to format my PC few days ago.
I had no problem with intallation: ID and PS work, but i've some problem with AI.
if I work on a new file it's all OK, but if I try to modify and than save a file that I created before format, or if I copy an old element in a new file the program crash.
there is some people that can help me?
many many thanks
martina

Moving this discussion to the Illustrator forum.

Problem with remote desktop and lock screen

I know of the easy way to immediately lock a Mac's screen by clicking the menu bar lock icon from KeychainAccess. This works on every system under my control (rMBP running Mavericks, MacMini with 10.5 and Mavericks). However when I control the Macs via Remote Desktop (currently 3.7.2), that lock icon behaviour changes.
Trying to lock a 10.5 system, the screen inside the Remote Desktop window goes black immediately. Moving the mouse activates the password dialog. That is what I want. Doing the same in a remote Mavericks system, the screen goes to a dark blackish semi-transparent state. Moving the mouse immediately restores the normal desktop view, no password asked. Is this a feature or a bug in Remote Desktop? This change in behaviour must have come in around Lion or Mountain Lion.
---markus---

Hi
Do you use the Intel Proset Utility to configurate the WLan connection?
Try to configure the WLan using this tool and check if the Wlan would disconnect again.
Im also interesting what Wlan driver did you use?
Did you use one from the Intel page?
If not, check the Intel page for the newest WLan driver version.

Problem with Bridge CS5 and Tools Photoshop Batch

When I select several images in Bridge CS5 and go to Tool>Photoshop>Batch and try an run an Action, I receive an error message asking for the Install disk. Bridge at that point freezes until I put in the install disk and then it runs the batch action fine.
This is very annoying as I always have to have the disk in my DVD Drive.
Any points would be welcomed.
Thanks,

Go to preferences/startup scripts and make sure there is a check mark for Bridge and Photoshop scripts.

3 problems With: Accelometer, Safari, And Home Screen Sliding, Update??

Hey Guys, i just got a 16GB iPhone today, and i noticed that sliding from one home screen to the other is like 1/8 slower than other iphones i tried, its a small fraction, but i want to enjoy my iphone to the fullest.
The second problem is concerning the accelometer, sometimes it takes about 10 seconds for it to change landscapes, and when it actually works right, its moves not in the same smooth way ive tried on other iphones too.
The final problem is concerning safari browser, whenever i have 3 pages or more, sometimes it closes by its own, and there's that accelometer problem again, screen changes differently every time.
I absloutly love it, no doubt about that, but i really want to enjoy it to the fullest, without any problems, so what do you think guys, should i update to 1.1.4, or is it all in my head??
Thanks for any help you give
Godfather

Thanks for the info Kevin, next time I reset I will clear the cache too and see if it works better for me than just the reset.
Also to the OP. Like Kevin said, the iphone must be nearly totally vertical for the accelerometer to register the change quickly. I was just testing and if I was holding the phone on a slant towards being horizontal and then rotate into landscape it takes several seconds to rotate. If I hold it vertical and then rotate its nearly instant. If you lay down on a table and then rotate it doesn't move at all.
I'm not sure why your settings screen would be lagging. Make sure your finger movements are smooth I suppose. And also safari will lag in doing anything while it is actively loading data from the net.
Edit - with further investigation it looks like it needs to be no more than at a 45 degree angel from vertical position for the accelerometer to pick up the change in orientation.
Message was edited by: Randy Fast

Probleme with Photoshop CS5 and printing with Mac Lion

When i try to print Photoshop crash. All my update is ok and the other application work well. And the same Photoshop work well in my other Mac with Snow Leopard.

Adobe Photoshop CS5 is listed here http://roaringapps.com/apps:table as working.

Problems with Yosemite (reboot and choppy screen image)

I recently upgraded to Yosemite. I have a MacBook Pro Retina 15" and am running 10.10.2
In all my years of using OSX I think I have been forced to do a hard restart MAYBE 6 times. Ever. And I've been here from the beginning of OSX and before. Since updating maybe two or three weeks ago I have had to hard restart about a dozen times. I am disappointed. The computer becomes non-responsive, yet I don't see the spinning beachball. It just - freezes. I hold down the power button and chug along until the next time.
Additionally, occasionally when using safari the screen gets kind of separated. For instance, if I click on something to go to a new page, part of the screen remains on the old screen and sort of flashes back and forth from old screen to new screen. IDK if that makes any sense. I've not been able to figure a pattern as of yet.
I'd like to know if anyone else is experiencing such oddities. Also, if anyone has any idea what I can do about these problems I'd be happy to entertain them.

You can also try the Safe Mode to reset things.
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite

Having a problem with ilife 08 and leopard screen saver

Hi,
Not sure if this is an osx leopard issue or a ilife 08 issue but before I did the upgrade I was able to use my entire iphoto library as random photos in the screensaver. Not it only let's me choose specific events or last import. it does not let me select the entire iphoto library?
Any ideas on this?

In System Preferences/Screen Saver, you need to go down the list past all the Events and you will see a listing titled "Photos" just above the item titled "Last 12 Months". Select it and you will see the entire iPhoto Library there.
Message was edited by: Anastassios T
Message was edited by: Anastassios T

Problem with FW CS5 and my new Macbook Pro

i own an MBP, i5, 4gb ram.
FW performes quite slow. especially show/ hide edges, or switching to the prewiev mode lasts very long. about 10 sek. within this time the whole OSX dosnt work.
i dont have this problems at any other adobe products.
can anyone help?

Here are a few links regarding the battery in your MBP:
http://www.apple.com/batteries/notebooks.html
http://support.apple.com/kb/HT1446
http://support.apple.com/kb/TS1473
Battery life is a function of how much you make the MBP work. Games and video the battery resources get used up very quickly. Text edit and email, you will approach the advertised figure, but probably never reach it.
Ciao.

Anyone having printer problems with adobe cs5 and mountain lion

I can print one copy in adobe cs5 but if I hit the print button it shuts down the program. Anyone having this problem besides me?

Are the drivers for your printer are up to date? You probably can print one copy cause it doesn't access the option window in your application.

Install problem with Contribute CS5 and Windows XP SP3

Trying to install the latest download version on an XP system (SP3). The installer is asking for WinWord and Explorer to be closed, however neither IE nor Word are runing and in the Task Manager, no Applications are running except the Adobe Installer.
I think it would be unwise to close e.g. explorer.exe in Task Manager -> Processes as it needs reboot to recover.
Stuck.

Restart your machine once and try installing Contribute.
Adobe Contribute 6.5 is out! More on http://blogs.adobe.com/contribute/2012/08/adobe-unveils-contribute-6-5-with-html5-support. html

Print problem with InDesign CS5 and Power RIP-X

When I try to print an InDesign page using PowerRIP I get a big X across the page that is not in the document. Any ideas as to why and how I can fix this?

The demo version PowerRIP adds the X watermark.

My new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare. They will help you.
Best.

I ask the third time: How can I enlarge the menue symbols and the text of the menue in Photoshop CS6 vers.13 so that I can read them??? My laptop has Win 8.1 and a screen resolution of 3840x2160

I ask the third time:
How can I enlarge the menue symbols and the text of the menue in Photoshop CS6 vers.13 so that I can read them??? My laptop has Win 8.1 and a screen resolution of 3840x2160.
It is unbelievable that such an expensive software does not provide a proper lay out wit a high screen resolution!
It is also unbelivable that it is not possible to get a qualified employee of ADOBE on the phone in Germany.
hope of feed back: e-mail: [email protected]

Chris Cox answered your question here:
I have PS cs6 extended and a new laptop with screen resolution of 3840x2160. Now all control elements and menues are so small that I can not reed them. How can I make them readable without reducing the resolution of the schreen?

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board.

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board. How much will a new battery and motherboard cost and would it be worth it or should I just get a new computer. It was about 300 dollars to get it serviced last week. if it adds up to much past 600 dollars I will just get a new one. THANKS FOR ANY HELP!
P.S During classes today it began beeping in my bag. Like three kind of long steady beeps then a short pause, and when I opened it I couldn't see anything but it was on so I turned it off and back on.

Depends on what options your Apple store offers - if they can do a depot repair (where they send it out), that's around $300 for all parts & labor.
If the store doesn't have that option, a logicboard is around $600, battery $80-$100, from what I've seen.
If they JUST replaced the logicboard, you absolutely should NOT have to pay for another replacement - the replacement is covered by a warranty. If they want you to pay for it, make sure you have a copy of the receipt for the work that was recently completed so you can show it to them. They have no reason to charge you for another logicboard.
~Lyssa

Problem with AE CS5 and laptop screen resolution during install..

Similar Messages

Maybe you are looking for