Problem with af:selectOneChoice in the Search Panels

Hello
I've made a ComboBox in my ViewObject and then I've draged it on a page as search panel form. But there is a problem in the ComboBox. When I search and the result in the table is "null", the list attributes in the comboBox dissapeare, it happens only when the results is null.
Does anybody has an idea?

I've forgotten to say that I'm use TP4...

Similar Messages

CS6 problem. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says "Mask and Look panels - Th

CS6 problem. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says "Mask and Look panels - The Mask panel is now placed next to the Look panel. WIth the masking and grading tools placed side-by-side, you can now work faster on the mask workflow." Is there a way to move, hide, or otherwise manipulate the panels for a custom layout? All the examples I can find on the Web show the Looks panel to the left of the Mask panel where the controls are available.

Ok, here is what I have so far. Appdelete the iWork and reinstalled. Pages and Number work, but not Keynote.
Now, I downloaded a couple apps that I need, and no matter what I did, the spinning ball came up and the download stopped till it unlocked itself. It is really frustrating because the download was not completed and whatever came through would not mount. Could this issue be the internet connection? Permission fix showed a lot of Airport issues. I will try to run permissions fix again.

Problem with my iTunes store, cannot search, stays in one application that I already purchased. Please help!

Problem with my iTunes store, cannot search, stays in one application that I already purchased. Please help!

Go to Settings, Store, Apple ID, Sign out and then sign back in again and have another go.
Also, try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

Problems with "no color" in the "Fill and Stroke"

I am having problems with “no color” in the “Fill and Stroke” function of Flash CS4 Pro.
I had been using CS4 for 10 days and everything worked fine. Then I tried experimenting with various color combinations (along with “no color”) for “Fill and Stroke” for a simple button. Suddenly CS4 locked up on me while I was working with the “color panel”. A second color panel appeared in the upper left corner and the program was not responding. All I could do was to end the CS4 task.
After that, whenever I created even a simple rectangle, at first the colors would appear as indicated for “Fill and Stroke”, but when I selected the object to see its properties, either the stroke or the fill color box would have a red slash line, indicating a “no color”, and I couldn’t select the color box to change it using the ink bottle tool, although the other box worked fine.
Rebooting did not help. So I uninstalled CS4 (and didn’t keep the preferences), rebooted, then reinstalled it. The problem was still there. Logging on as another user didn’t help. I tried restoring the Windows system to before I installed CS4 and resinstalling it and that didn’t work. I have a disfunctional CS4 now and I don’t know what to do to fix it. Please help me. Thank you.

Have you updated flash to 10.0.2? Have you played around with a bunch of different selections, objects, and so forth to see if this box is always incorrect? I think there's some particular selection (order of selecting things, and so on), where the color swatches in one location don't work as expected. However, it should not happen all the time and from what I recall it was fairly easy to work around (I can't even figure out what this was - so probably not it, as it seems hard to run into or perhaps now fixed).
Also make sure you have the stroke selected - if you don't have everything selected, either the fill or stroke will show no color and dim depending on the selection.

TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

HT1222 I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be..

I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be...
I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

Hello , please am having a problem with my iphone 5 , the battery runs out quickly , also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out , and my final problem is that is "no service " appears a lot can you help ?

Hello , please am having a problem with my iphone 5 , the battery runs out quickly ,another problem also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out . My final problem is that "no service " appears a lot especially when opening wifi or 3G , can you help ?

Your battery is running quickly because your cellular data connection is weak.
Is your phone carrier a supported carrier: Wireless carrier support and features for iPhone in the United States and Canada - Apple Support
For your no service issues: If you see No Service in the status bar of your iPhone or iPad - Apple Support

HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

Hi folks,
i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
Can any one help me in this regard??

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

MacBook Pro 15 with Windows 8.1 installed via Boot Camp problem with keys "@" and " " of the keyboard

Hello,
I have a MacBook Pro Retina Maverick in 2013 on which I installed Windows via Boot Camp 8.1.
The installation went well but when I am running Windows 8.1, I have a problem with "@" and "<" keys on the keyboard.
When I type the "@" key, I get "<"
When I type the "<" button, I get "@"
I have reinstall Boot Camp from Windows 8.1 for reinstall the drivers and see if it would solve the problem but it was not the case.
Someone of you has he encountered the same problem?
Thank you.

The language of my Keyboard is French

Problem with iWeb 09, after the publication in a local file.

*Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
Please help me.

I want to activate the comments, it doesn't work neither.
The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.

I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions

I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions?

Oh no! Lets ensure that you are connected. Have you tried to reset the Network Extender? Are other devices able to connect to the Extender? Is your Internet service up and running?
Share details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

What is the best way to zero a 'custom voltage with excitation' sensor from the front panel?

What is the best way to zero a 'custom voltage with excitation' sensor from the front panel?
Thanks for any help

Hi Donavan,
There are two options for zeroing with the NI-9237. You can perform offset nulling and shunt calibration with a strain task, or if you use custom excitation you can use software compensation.
See the Bridge Balancing, Offset Nulling section in the Load, Force, and Torque Measurements tutorial. Take a measurement before the strain is applied and subtract this from all subsequent measurements. See the above tutorial to consider the tradeoff in accuracy between these two options.
Hope this helps,
Jennifer O.
Applications Engineer
National Instruments

Chart - problem with realize one of the function under CR XI

Post Author: mrowa
CA Forum: Charts and Graphs
Hello,
I have
problem with realize one of the function under CR XI. I would be persuade if
any of us would like to help me.
1)
1) From
database (basically from one table), I take data to make report. Each of record
have appropriate fields:
dteData
intYear
intMonth
intDate
2)
2) I
want to realized comparison data from two or more periods of time on one chart
and in one table. For easily explanation I will describe problem on two
periods.For instance, user want to display and compare
on chart date (type monthly -sum data of each month) from 2007.02 u2013 2007.05
with date from 2006.03 u2013 2006.06. So we compare month 2007.02 with 2006.03;
2007.03 with 2006.04; 2007.04 with 2006.05; 2007.05 with 2006.06
On char I would like to display bars with comparison
of months.
Problem is that I donu2019t know how to write
something similar. I can use one period without any problems, but two and mores
I canu2019t realized.
Detail description:
I passed
two parameters two report:
{?from}, {?to} u2013for first period
{?offset}, it means {?from}+{?offset},
{?to}+{?offset} - for second period
On axis Y I have Sum(intDate);On
X (year + month). But on each value x( example 20007.02) I need to have
two values (bars). Value for standard period and offset.
For example for x=2007.02, I need
two bars one equal 2007.02 and second with offset u2013 2006.03
Movement to next value (bar) is
persuade by fields {data.rok}&{data.month} first or second period. This is
combination of two elements year&month defined under Formula. Problem
persist in that both period has different year.month and here problem starts once
again. I donu2019t know how to solve it. I have found out one solution but it
limits user only for two periods (I want to compare more).
My idea for compare only two
periods:
I make one query in CR for one
period and second query for second period.
Firs query:
"SELECT
       year ,
      month
Second query
"SELECT
       year + FLOOR({month + offset} % 13),
      {month + offset} % 13
Then in CR I connect two periods and
make u201Ctableu201D (results of queries) with JOIN on fields year and month.
This solution is not functional,
because I need to make reports for days and hours as well. In this solution I
canu2019t use (%31), because not all months has 31 days.
I use CR in WEB app made in Visual
Studio 2005. Maybe from aspx we can manipulate with date to get exact solution,
and solve problem with SELECT.
Hope my description clearly
describe problem and someone will be able to help me. I would be thankful.

I have had similar problem before.
Because I had too many data, the legend would not display all the data. Also the chart would not display all the data. But I was able to find a work around.
In your case, Right click on the Legend text and click on Format Legend Entry.
Change the font of the legend to 4 (which is the minimum). This may work.
If you are also having problem with data labels, you could change the font size of the data labels.
Hope this helps.
Thank you.

When I make a project in iDVD'09, there are sometimes green blocs with points flickering in some scenes of my iMovie-film. In iMovie there is no problem with this film, but the problem begins by exporting to iDVD and making a project there.

When I make a project in iDVD'09, there are sometimes - at voluntary moments - green blocs with points flickering in some scenes of my iMovie-film.
In i-Movie there is no problem with this film, but the problem begins by exporting to iDVD and making there a project.
Who can help me, then I cann't find everything about this in any forum?

Hi
Can be a problem that get multiplied and visible when iDVD encode for DVD.
A. See if problem can be isolated to a single frame in the movie and re-import this clip and see if it's better
B. When free space on Start-Up hard disk goes low - strange things like this might occure. I never go under 25Gb free space on this Start-Up Mac OS hard disk !
C. Does this problem arises what ever encoding quality You use ?
Yours Bengt W

Problem with af:selectOneChoice in the Search Panels

Similar Messages

Maybe you are looking for