Problem with Aged paper effect

I have a clip that Has veen trimmed, cropped, and Ken Burnsed.
When I added the Aged Paper effect, the clip looked great except for a white stripe on one edge.
I have tried changing all kinds of parameters but I still get the white edge on the right.

I've just tried it and found no problem.
Are you using it on the complete frame or doing something peculiar?
You could try shutting down FCP X and trashing the preferences.
Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.
There is absolutely no danger in trashing preferences and you can do it as often as you like.
The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones . . . instantly.

Similar Messages

Problem with custom paper size on dot matrix printer

Hi All,
I'm using CR2008 with updated to SP2. I have a problem with custom paper size (W=21; H=14), the CR Viewer show report with custom paper size correctly but when I print it to a dot matrix printer (Epson LQ 300+) the content was rotated to landscape. If print to a laser printer the content was printed correctly. My report was printed correctly by CR10 or previous versions I got this issue when upgraded to CR2008. I aslo tested my computer and printer with orther application like MS Word the printing have no problem with custom paper size.
Thanks for any advice for me.
Han

Looking at the Epson LQ 300+ driver, I see that the latest update is from 2002. In my experience, most matrix printer drivers are not unicode. Crystal Reports is designed to only work with unicode printer drivers. See the [How Printer Driver Options Affect a Report|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29&overridelayout=true] article, page 6 for details. Also, see [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Finally, see if you can print from the CR designer to this printer and if you get the correct results here.
Ludek

Problem with the Blind effect.

Hi, i have a problem with the Blind effect.
I added multiple Image bars vertically together. With a click on a bar, some text slides out. With another click on the bar you can slide the text back in. So far so good.
Now, always when i click to open or close a window, the site jumps to a certain point, but i can't exactly figure out where it's jumping to.
Is there an order to fix the position of the bars, so that they don't move, even if I open or close the bars?
The problem does not appear when im at the bottom of the website.
thx for your help.

I figured out the problem I was having with my zoom effect.
It worked when I added a specific number for height and width.
Before I had a percent. Try adding a height and width number, it
worked for me.

Problem with DeNoiser audio effect

I hava a problem with DeNoiser audio effect. When I apply it to a clip, it starts to work after a few seconds: it produces noisy audio on the beginning of each clip, but clean at the end. It appears both when I watch playback in Premiere (with MPE GPU acceleration enabled on GTX 460), and in final rendered movie.
How can I resolve this problem? Or maybe Premiere has got other effects that function similar to DeNoiser and work fine?
I'm using Premiere Pro CS6 Trial (updated version 6.0.1, I have also updated Media Encoder to version 6.0.1). I work with footage from Canon 600D DSLR (1080p24, mov, H.264, PCM audio). My operating system is Windows 7 Ultimate 64-bit (with SP1, problem appears also on Windows without SP). I have no third-party plugins instaled.

How can I resolve this problem?
Don't use that effect. Instead do this kind of thing in Audition.

Problems with Custom Paper Size and Address Book

I'm having some trouble printing from Address Book onto a custom paper size. I'm attempting to set up a notecard, and only print one at a time, rather than multiple columns as in the Labels option. The trouble is that when creating this small size, Address Book doesn't recognize it as anything other than a regular sheet of US Letter, and thus prints the address in the middle of the page.
I have no problem printing envelopes, though, which seems odd because they too go in the manual feed for my printer. The notecards are similar width to the envelopes, but only about half the length.
Has anyone else experienced problems with custom paper sizes printing improperly? I'm using an HP 4515 LaserJet, but have access to a few other laser printers. Thanks for any insight

I have had the same problem, and with the same result; Adobe Tech Support can't help or fix, after 15 hours on phone, Level 2 support. It is a software bug Adobe has, and can't seem to fix. I just upgraded to Lightroom CC, and my problem migrated with the upgrade. I print in Photoshop fine.
If you found an answer, I would appreciate knowing how to do it!
Thanks

Problem with premiere pro effects controls

Hi, Merry Christmas;
I have a problem using keys with the opacity effect in the effects control panel; the following pictures should I think make my problem clearer to understand:
The image above shows that the opacity control of the correction gopro clip is at 100% which unless I've drunk too much champagne, is in full view on the screen!
I want to make a transition effect showing the raft appearing in the window of the following picture which is an Indian Granary above the Colorado river.
On my clip of the Granary I zoomed up to the window as to give the impression I get into the granary itself; When I arrive at this moment I begin, with key frames to have
the granary interior pass from 100% opacity to 0% at the end of the granary clip. Unless again champagne is very bad for my health and vision, I should see then the river
and the raft! Well I don't and that gives me nightmares! What is wrong? I add that to have a smooth and regular zoom I have used time remapping on the granary clip.
The granary clip is the one just above the correction gopro clip and overlapping it by the duration of the dissolve shown selected in the picture below(I could of course use a dissolve here, but I want to economize on a supplementary effect)
below is the view with the screen and the opacity of the granary clip at 25%. Normally the clip of the raft should be quite visible then! the red-orange on the right of the screen is the interior wall of the granary!
Thanks for any suggestions... Claude

Stacking in Adobe products is prototypically the top being the final thing you "see". If you have two clips, one atop the other, you will normally see the top clip & nothing from the bottom clip ... unless the top-most clip is given some transparency by say bringing its opacity setting down.
Think of it as the bottom layer "feeds" up to the next higher layer and so on. What comes out at the top is what you will see as the final product.
Much of my work has been short interviews cut with b-roll & stills. The basic interview sits on V1, and I use V2 and only occasionally V3 for the b-roll & stills that I'll cut to for variety, information, or simply interest retention during the running of essentially the audio from V1. This works nice, as I can expand or trim the b-stuff as it seems right while playing back. Then if I want to put in a transition, as part of polishing, I can either trim out the V1 section and move the V2 clip "down" before adding transitions or do a razor on V1 on both ends and add it to the end of the clips. Typically I cut out the section.
The lesson is ... putting anything on a higher track replaces the viewable video of anything under it. Unless you reduce the upper tracks opacity.
Neil

Problem with Adobe After Effects CS6 on Windows 8.1 PRO

Hi Adobe Systems guys, I would like to know when the error will have the solution presented Adobe After Effects CS6 (Latinoamerican Spanish Version) running Windows 8.1 PRO, and throwing the following error.
I've tried the latest available update 11.0.3 but does not correct the problem. I wonder when will be ready the solution because with Illustrator CS6 also was the same but with the solution described in this page, http://helpx.adobe.com/illustrator/kb/illustrator-does-not-start-windows-81.html was solved perfectly.
I appreciate prompt as we need urgent help to use the software in its Spanish version as was originally purchased. thanks

That such a friend, for I tell you that none of their solutions is an option for me because:
• Wait a couple of months with no after effects in the hope That a patch will come ... someday
R:/ The problem is not mine, is problem of Abode and therefore investing heavily in the creative suite CS6 and for that to be an option.
It's not fair to have to beg for a solution.
• Upgrade to CC and enjoy all the latest features
R:/ It is not possible , because we will not spend more money than they already invested in Suite CS6
• Use After Effects CS6 in English
R:/ It is not possible as the staff in charge of managing this program if it is not handled in English and therefore bought the suite in Spanish .
• Roll your computer back to Windows 8 instead of 8.1
R:/ It is not possible as it is known all Windows 8.0 failures we have put in 8.1 PRO .
I do not understand is that if Adobe Illustrator had the same problem and it was fixed within a couple of days getting the patch , why not do the same with After Effects CS6 in Spanish . All users of this suite CS6 and buyers deserve respect and prompt solution to the problems that are the fault of Adobe.

Problem with countinuous paper printing in dot matrix printer

Hi All,
I have problem with dot matrix printer (Devise Type EPESCP) while printing continuos printing. If i am printing 2 or more than that prints at a time, 2nd page is printing 5 lines up.
I have developed one smartform for this and i have used A4 size page format.
I have tried to change the Printer initialization code to 86 lines for DINA4. Still no change in continuous printing.
     Printer initialization
     Reset after exit
     Cover page
     First Page
     Start of even page
     Start of odd page
     Start of page
     End of first page
     End of even page
     End of odd page
     End of page
     Start of line on an even page
     Start of line on an odd page
     Start of line
     End of line on an even page
     End of line on odd page
     End of line
Printer initialization
# reset
\e\0x40
# select character table 3 -> PC 437 character set
\e\0x74\0x03
# set line spacing 6 LPI
\e\0x32
# set page length 86 lines
\e\0x43\0x46
# cancel bottom margin
\e\0x4F
# set left margin to 0
\e\0x6C\0x00
# select LQ quality
\e\0x78\0x01
# select non-proportional spacing
\e\0x70\0x00
Can any one help me.
Thanks,
Vishnu

Hi Vishnu,
Above you have the following commands:
set line spacing 6 LPI
\e\0x32
set page length 86 lines
\e\0x43\0x46
46 HEX = 70
So the above settings mean 70 lines at 6 LPI = 11.66 inches.
So is the paper length 11.66 inches? If not, you should adjust the settings accordingly.
Regards,
Aidan

Problem with the zoom effect

I have five images in a row and I have added a zoom effect to
the rollover and rollout effects. What I have noticed is that the
image only zooms out when I bring the mouse out from the bottom of
the image. If I try to bring the mouse from left to right across
the images the first image zooms in but not out, and this happens
for all five images. Can anyone identify what I am doing wrong?
Here is my code:
<mx:HBox width="100%" horizontalAlign="center">
<mx:Image source="@Embed('images/bistro9-1.jpg')"
scaleX=".05" scaleY=".05" rollOver="doZoom(event)"
rollOut="doZoom(event)"
click="showImage('images/bistro9-1.jpg')"/>
<mx:Image source="@Embed('images/bistro9-2.jpg')"
scaleX=".05" scaleY=".05" rollOver="doZoom(event)"
rollOut="doZoom(event)"
click="showImage('images/bistro9-2.jpg')"/>
<mx:Image source="@Embed('images/bistro9-3.jpg')"
scaleX=".05" scaleY=".05" rollOver="doZoom(event)"
rollOut="doZoom(event)"
click="showImage('images/bistro9-3.jpg')"/>
<mx:Image source="@Embed('images/bistro9-4.jpg')"
scaleX=".05" scaleY=".05" rollOver="doZoom(event)"
rollOut="doZoom(event)"
click="showImage('images/bistro9-4.jpg')"/>
<mx:Image source="@Embed('images/bistro9-5.jpg')"
scaleX=".05" scaleY=".05" rollOver="doZoom(event)"
rollOut="doZoom(event)"
click="showImage('images/bistro9-5.jpg')"/>
</mx:HBox>
<mx:Zoom id="zoomAll" zoomWidthTo="0.06"
zoomHeightTo="0.06" zoomWidthFrom=".05" zoomHeightFrom=".05" />
public function doZoom(event:MouseEvent):void {
if (zoomAll.isPlaying) {
zoomAll.reverse();
else {
// If this is a ROLL_OUT event, play the effect backwards.
// If this is a ROLL_OVER event, play the effect forwards.
zoomAll.play([event.target], event.type ==
MouseEvent.ROLL_OUT ? true : false);

I figured out the problem I was having with my zoom effect.
It worked when I added a specific number for height and width.
Before I had a percent. Try adding a height and width number, it
worked for me.

Problem with tilt shift effect

I have the latest version of Elements 12 and have just started to experiment with the Tilt-Shift Guided Effect. The problem I'm having is that when I try to change the area of focus, nothing much seems to change in the picture. Sometimes it seems like the original in-focus area stays in place and I can make small changes elsewhere in the picture.
I was wondering if anyone else was having a problem with Tilt-Shift?
thanks.

I think I verified what I was seeing in Guided Mode by going to Expert Mode after trying to alter the focus area. In expert mode I found a mask for the blur layer - and what I saw were 2 gradients rather than just one. One of the gradients in the mask was where Elements put the default in-focus area, and the second gradient in the mask was where I tried to move the in-focus area to. I was expecting to find one gradient on the mask, but instead there were two. Are others observing this same behavior? Thanks.

IMovies problem with Ken Burns effect.

When I use Ken Burns effect in IMovies, the bricks of a house, the line of a shirt, ... are kind of vibrating. In Aperture 3, it is ok. Is that a known problem with IMovies ?
Lombarr1.

I have seen that in older editions - like iMovie 6 - especially when using pics at a high resolution - the water or sky seemd to shimmer. Funny I'm using iMovie 11 now and some things I liked better in 6, but you bring to mind something that bugged me (though people would ask - "How did you get that to happen?")

Problem with GRID NAVIGATION EFFECTS WITH JQUERY

Hi All,
Im having problem with this image gallery with navigation (please see link below to see running demo). I am trying to use the 'Row move' style but am having problems getting the function to work. I have the images and everything set up fine but the actual function/navigation isn't working. I have downloaded all the relevant files to my computer but nothing happens when i click on the arrows. Also all of the 20 images are showing instead of just the 2 rows of 3? There should be 2 rows of 3 iamages showing then when the arrows are clicked the next two rows are shown and so on.
http://tympanus.net/codrops/2011/06/09/grid-navigation-effects/
This is the code i have -
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>My gallery</title>
<link href="stylesheet.css" rel="stylesheet" type="text/css" />
<link href="gridNavigation.css" rel="stylesheet" type="text/css" />
<link href="reset.css" rel="stylesheet" type="text/css" />
<style type="text/css">
body {
          background-color: #000000;
a:link {
          text-decoration: none;
          color:#f1d379;
a:visited {
          text-decoration: none;
          color: #f1d379;
a:hover {
          text-decoration: none;
          color: #9d6f1b;
a:active {
          text-decoration: none;
          color: #f1d379;
</style>
        <script type="text/javascript" src="scripts/jquery-1.6.1.min.js"></script>
                    <script type="text/javascript" src="scripts/jquery.easing.1.3.js"></script>
                    <script type="text/javascript" src="scripts/jquery.mousewheel.js"></script>
                    <script type="text/javascript" src="scripts/jquery.gridnav.js"></script>
<script type="text/javascript">
                              $(function() {
                                        $('#tj_container').gridnav({
                                                  type          : {
                                                      rows    : 2,
                                                            mode                    : 'rows',                               // use def | fade | seqfade | updown | sequpdown | showhide | disperse | rows
                                                            speed                    : 1000,                                        // for fade, seqfade, updown, sequpdown, showhide, disperse, rows
                                                            easing                    : 'easeInOutBack',          // for fade, seqfade, updown, sequpdown, showhide, disperse, rows
                                                            factor                    : 150,                                        // for seqfade, sequpdown, rows
                                                            reverse                    : ''                                        // for sequpdown
                    </script>
</head>
<body>
<div class="container" id="container">
<div id="navbar" class="#navbar">
<ul>
          <li><a href="index.html">Homepage</a></li>
          <li><a href="about_me.html" >About me</a></li>
          <li><a href="gallery.html">Gallery</a></li>
          <li><a href="contact.html">Contact</a></li>
</ul>
</div>
                                                  <div class="tj_nav">
                                                            <span id="tj_prev" class="tj_prev">Previous</span>
                                                            <span id="tj_next" class="tj_next">Next</span>
                                                  </div>
                                                  <div class="tj_wrapper">
                                                            <ul class="tj_gallery">
                                                                      <li><a href="#"><img src="images/1.jpg" alt="image01" /></a></li>
                                                                      <li><a href="#"><img src="images/2.jpg" alt="image02" /></a></li>
                                                                      <li><a href="#"><img src="images/3.jpg" alt="image03" /></a></li>
                                                                      <li><a href="#"><img src="images/4.jpg" alt="image04" /></a></li>
                                                                      <li><a href="#"><img src="images/5.jpg" alt="image05" /></a></li>
                                                                      <li><a href="#"><img src="images/6.jpg" alt="image06" /></a></li>
                                                                      <li><a href="#"><img src="images/7.jpg" alt="image07" /></a></li>
                                                                      <li><a href="#"><img src="images/8.jpg" alt="image08" /></a></li>
                                                                      <li><a href="#"><img src="images/9.jpg" alt="image09" /></a></li>
                                                                      <li><a href="#"><img src="images/10.jpg" alt="image10" /></a></li>
                                                                      <li><a href="#"><img src="images/11.jpg" alt="image11" /></a></li>
                                                                      <li><a href="#"><img src="images/12.jpg" alt="image12" /></a></li>
                                                                      <li><a href="#"><img src="images/13.jpg" alt="image13" /></a></li>
                                                                      <li><a href="#"><img src="images/14.jpg" alt="image14" /></a></li>
                                                                      <li><a href="#"><img src="images/15.jpg" alt="image15" /></a></li>
                                                                      <li><a href="#"><img src="images/16.jpg" alt="image16" /></a></li>
                                                                      <li><a href="#"><img src="images/17.jpg" alt="image17" /></a></li>
                                                                      <li><a href="#"><img src="images/18.jpg" alt="image18" /></a></li>
                                                                      <li><a href="#"><img src="images/19.jpg" alt="image19" /></a></li>
                                                                      <li><a href="#"><img src="images/20.jpg" alt="image20" /></a></li>
                                                    </ul>
            </div>
</div>
</body>
</html>

Not sure what example you are using but it looks like you have missed out a couple of important <divs> in your code which surround the main <div>:
If the case of example five:
<div class="content example5'>
<div id="tj_container" class="tj_container">
MAIN STUFF GOES HERE
</div>
</div>
I dont know if its my computer or not but I found the animation a bit flaky.

CS6 Problem with Custom Paper Sizes

When printing on Epson printers (4800,4880,4900) in the Photoshop print settings dialogue box it won't allow me to print at a custom paper size using the sheet or manual feed settings. The paper feed option defaults to Roll Paper when I create the custom paper size, and then when I change it and try and save the settings it just reverts back to roll paper. If I try and send a print after this then the printer won't accept it because it's being told to print on a roll instead of sheet. Why is this?? I'm using CS6 and OS 10.7 and I've never experienced this problem with any previous Photoshop/ Mac OS X before. Please help!

I use a pc therefor Windows and PC Photoshop. Anyway The way this works in Philosophy windows print dialog you have to set both Photoshop print settings and the printer driver settings. And if Photoshop is to handle colors you must set off the device drivers color management. Photoshop Dialog has a printer setting button. I use that to set the device driver setting like color management off, print quality and custom paper size and source roll paper.
I also wrote a script to tile image into a document for printing on roll paper and eliminate paper waste. http://www.mouseprints.net/old/dpr/PasteImageRoll.html

Problems with custom paper sizes in Lightroom

Running Mac OS-X 10.9.3 (Mavericks). using an Epson Stylus Pro 3880, latest driver installed as confirmed by Epson tech support this morning. using Lightroom 5.4.
I only see this problem in Lightroom - not in Photoshop - which leads me to conclude that the problem is not an Epson-driver problem.
The problem is the following:
In the Print Module, I click on 'page Setup' bottom left. I define my custom paper size under 'Paper Size' -> 'Manage Custom Sizes'. Click OK.
I then enter 'Print Settings...' bottom left adjacent to the 'Page Setup' button. Select my printer, click on the 'Layout' drop-down list box button and select the 3rd tab in the list: 'Paper Handling'. Here is the problem: the 'Destination Paper Size' option is grayed out and unelectable, and incorrectly shows 'US Letter', which cannot be changed. If I click on 'Scale to fit paper size', and try to make a print to my custom paper that way, it still does not work: it only prints on a fraction of the whole paper.
I have also tried Apple menu -> System Preferences -> Printers & Scanners to change the default paper size there, but it makes no difference - it still incorrectly shows as 'US Letter' in Lightroom.
This problem does not occur in Photoshop: In Photoshop, if you go to File -> Print in the menu, and then hit the 'Print Settings' button near the top, my custom paper size is selectable in the 'Paper Size' list box. So it is a problem which is specific to Lightroom.
Any help appreciated. I have spent most of the day on the phone to Epson and Adobe Tech Support, and no-one has been able to dove the problem
Thanks,

I have had the same problem, and with the same result; Adobe Tech Support can't help or fix, after 15 hours on phone, Level 2 support. It is a software bug Adobe has, and can't seem to fix. I just upgraded to Lightroom CC, and my problem migrated with the upgrade. I print in Photoshop fine.
If you found an answer, I would appreciate knowing how to do it!
Thanks

I am having problems with my after effects. It says that quicktime needs to be installed but it is already installed. help

i have tried everything but its not working!!! @

1. Download the .dmg file and save it to a folder on your computer.
2. Quit After Effects CS6 if it is running.
3. Double-click the .dmg file to open it, and then double-click the AdobePatchInstaller.app file to launch the patcher.
4. Follow the on-screen instructions. There might be a slight delay before the update progress meter starts moving.
im having trouble updating after effects.
im having problems with the third step. help me please

Problem with Aged paper effect

Similar Messages

Maybe you are looking for