Problem with AI File extension association

I have Adobe CS4 and for some reason, my computer doesn't recognize Adobe Illustrator as the default program for .ai files. Instead, it lists AIRegedit.exe.
When I open up the Properties, it displays in the type of file field "example.ai" as an .ai file instead of the normal Adobe Illustrator Document.
When I open up "Associate a file type or protocol with a specific program" .ai files are listed as "AI File" instead of "Adobe Illustrator Document."
Usually the icon for an Illustrator document is an orange square with inner white lettering, but now it is a white block with a small orange square inside.
I'm novice when it comes to Regedit, so I'm wondering if anyone has had similar problems or suggestions on how I could fix this file extension problem.
Thanks!

something got messed up, usually re-starting is the miracle fix for a number of windows issues. If it does not get fix by itself try this:
right click on an AI file, in the context menu choose "Open With", then go down to "Chose Program...". Find AI CS4, select it by clicking once and make sure to check "Always use selected program...."

Similar Messages

Problems with specifying File Extension of E-Mail attachment

Hi everybody
I have a problem that seems to be so simple that it almost drives me crazy that I cannot find a solution for it.
I need to send the content of an internal table (some lines) as a mail attachment to a specified mail address.
The format should be normal ASCII, so when I open it with any text editor (e.g. Notepad), I want to have all my lines there (including CR/LF).
The problem now is - The extension of this mail attachment must be ".key", so the attached file should have the name "L_12345.key" (for example).
For E-Mailing I use FM "SO_NEW_DOCUMENT_ATT_SEND_API1".
This part works fine, also the attachment part works in general. (I receive the mail and I receive the attachment).
BUT I get either an attachment with the name "L_12345.txt" or "L_12345.key.txt" and in correct format, or I get an attachment "L_12345.key", where the name is correct but format is wrong (no CR/LF - everything in one line).
Example:
=======
Attachment-Content should be:
Line 1
Line 2
Line 3
Name of Attachment should be: L_12345.key
What I tried:
TEST 1 **
Declare Attachment in Packing list. ..
ls_packing_list-transf_bin   = ' '.
ls_packing_list-head_start   = 1.
ls_packing_list-head_num     = 0.
ls_packing_list-body_start   = 7. "Startline of Attachment
ls_packing_list-body_num     = 3. "No of Attachment lines
ls_packing_list-doc_type     = 'RAW'.
ls_packing_list-doc_size     = 3 * 255.
ls_packing_list-obj_name     = 'ATT01'.
ls_packing_list-obj_descr    = 'L_12345'   "Attachment name
APPEND ls_packing_list TO lt_packing_list.
==> Result: Attachment Filename = L_12345.txt
==> File as I need it (ASCII with CR/LF), but extension wrong
    Line 1
    Line 2
    Line 3
TEST 2 **
Same as TEST 1, but with:
ls_packing_list-obj_descr    = 'L_12345.KEY'   "Attachment name
==> Result: Attachment Filename = L_12345.KEY.txt
==> File as I need it (ASCII with CR/LF), but extension wrong
    Line 1
    Line 2
    Line 3
TEST 3 **
Declare Attachment in Packing list. ..
ls_packing_list-transf_bin   = ' '.
ls_packing_list-head_start   = 1.
ls_packing_list-head_num     = 0.
ls_packing_list-body_start   = 7. "Startline of Attachment
ls_packing_list-body_num     = 3. "No of Attachment lines
ls_packing_list-doc_type     = 'KEY'.
ls_packing_list-doc_size     = 3 * 255.
ls_packing_list-obj_name     = 'ATT01'.
ls_packing_list-obj_descr    = 'L_12345'. "Attachment name
APPEND ls_packing_list TO lt_packing_list.
==> Result: Attachment Filename = L_12345.KEY
==> File Format is wrong:
    Line 1          Line 2     Line3
I have tried several other Extensions (DOC_TYPE), it seems, that the File format is only correct with "RAW", but it seems with "RAW" SAP adds ".txt" as extension to the filename.
Does anyone know how I can achieve having an e-mail attachment with multiple text lines and name "<anyname>.key"
Any help (if possible with example code ?) would be highly appreciated.
Many thanks
Harald

hi,
check the following code.
*&      Form send_email
FORM send_email.
CLASS cl_abap_char_utilities DEFINITION LOAD.
CONSTANTS: con_cret TYPE c VALUE cl_abap_char_utilities=>cr_lf.
*Body of mail
CLEAR objtxt.
CLEAR objtxt[].
objtxt = 'Dear abc'.
APPEND objtxt.
CLEAR objtxt.
APPEND objtxt.
objtxt = 'Attached herewith is the detail list of materials.'.
APPEND objtxt.
CLEAR objtxt.
APPEND objtxt.
objtxt = 'Regards,'.
APPEND objtxt.
objtxt = 'Admin'.
APPEND objtxt.
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
*Mail description
CLEAR docdata.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
docdata-obj_name = 'List'.
docdata-obj_descr = 'List of materials'.
docdata-obj_langu = sy-langu.
*Packing list for main document
CLEAR objpack.
CLEAR objpack[].
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = tab_lines.
objpack-doc_type   = 'RAW'.
APPEND objpack.
*Attachment data
CLEAR objbin.
CLEAR objbin[].
CONCATENATE
        'field1' 'field2' 'field3' 'field4'
    INTO objbin SEPARATED BY ','.
CONCATENATE con_cret objbin INTO objbin.
APPEND objbin.
LOOP AT it_material_list INTO wa_material_list.
    MOVE-CORRESPONDING wa_material_list TO wa_char_material_list.
    CONCATENATE
          wa_char_material_list-field1
          wa_char_material_list-field2
          wa_char_material_list-field3
          wa_char_material_list-field4
      INTO objbin SEPARATED BY con_tab.
    CONCATENATE con_cret objbin INTO objbin.
    APPEND objbin.
    CLEAR objbin.
    CLEAR wa_char_employee_list.
ENDLOOP.
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
*Packing list for attachment document
CLEAR objpack.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.          "check these values
objpack-head_start = 1.          "check these values
objpack-head_num   = 1.          "check these values
objpack-body_start = 1.          "check these values
objpack-body_num   = tab_lines.
objpack-doc_type   = 'KEY'.
objpack-obj_name   = 'Attachment'.
objpack-obj_descr = 'Report.KEY'.
APPEND objpack.
*Email receiver's list
CLEAR reclist.
CLEAR reclist[].
reclist-receiver = mail_id.
reclist-rec_type = 'U'.
APPEND reclist.
*Function module to send email with an attachment
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = docdata
      put_in_outbox              = 'X'
      commit_work                = 'X'
    TABLES
      packing_list               = objpack
      contents_bin               = objbin
      contents_txt               = objtxt
      receivers                  = reclist
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    "send_email
Edited by: vikram shah on Sep 25, 2008 5:28 PM

Problem with reading file extensions from a Fat 32 Drive

I have been copying image files from my imac 24" OSX 10.6.8 to a Maxxtor One touch external USB drive, the drive is FAT 32 format for a PC. My wife then connects the same drive to her laptop which is running Windows 7. She then sorts the images into different folder gives me back the drive to have more loaded to sort. The problem is when I get the drive back all the image files have a funny little box behind the file extension and the preview icon is blank with a exe in green, the file info says it's a Unix extension.
I tried to remove the little box and open the .tif file or .jpg files and all I get is a image is not readable. The same drive can be mounted back to my wife's laptop and the images open up just fine in Windows media viewer.
What's going on here and how do I fix and prevent this from happening again?
Thanks!
Pat

So No one has any ideas on how this is happening and how to go about repairing the problem.
The trouble as I see it comes up once she moves the files into another folder on Maxxtor drive when it's hooked up to the Win 7 laptoop. The Data then is unuseable on my Mac from that point on.
I need to know WHY so I can aviod this from happening again, and how to fix currently there is 250 GB of image files I can not access on my Mac and I still have about 2 TB of image files to go through, and THEY ALL NEED TO BE ACCESSABLE.
Anybody?

I was having an issue opening a spreadsheet with the file extension .xlsm. This appears as an attachment from a client which means macros were utilized when creating the spreadsheet. The problem lies in. The iPads ability to open the attachment. I downloa

I was having an issue opening a spreadsheet with the file extension .xlsm. This appears as an attachment from a client which means macros were utilized when creating the spreadsheet. The problem lies in. The iPads ability to open the attachment. I downloaded the numbers app thinking this would be a default software to open any and all spreadsheets.
Please Help!
Ipad 2- iOS5

You may need a version without macros on it. Unfortunately, pretty much all apps are skinned down versions of their original program, often with less functionality. For example in a word document I can italicize,bold and underline, but I only have a handful of fonts to play with and I don't think I can insert tables or images.
It is very possible that the app simply cannot run macros, which means that document may never work on an iPad.

Problem with Image File in Encore CS5

I made a 6 GB Image File in order to make BluRay discs without having to open Encore each time. I can't seem to find software that will allow me to use the file to burn the disc. Simple copy/paste doesn't work either. The problem may be that the image file has no file extension. Checking properties in Windows 7, where the file extension is usually displayed, it just says "file". Can anyone explain why Encore is exporting a file with no file extension (like .iso, for example), and how to get around this issue?
Thanks.
Steve Siegel
[email protected]

Encore creates a bluray image with an iso extension. I wonder if you have windows explorer set to show no extension.
You may not have "iso" associated with a program on your computer.
Also, you cannot burn the "file" to a BD and have it play. You need a program to take the image and burn it in the correct bluray format onto the disk.
Most of us love imgburn:
http://www.imgburn.com/

StarOffice 8 CDE Icon and Document File Extension Associations

I recently upgraded to Solaris 10 (5/08). With previous versions of Solaris, I installed StarOffice 7 from CD and it placed the nice little icon in the CDE desktop panel and it created StarOffice associations to all the typical office file extensions (ie. .doc, .xls, etc.). I would like to use the StarOffice 8 that is bundled with Solaris 10. Is there an installation step or some other way to automatically setup the CDE icon and the file extension associations?
Thanks,
Joe
Edited by: jdulisse on Sep 19, 2008 11:45 AM

I came across the same problem on windows XP SP2 machines.
I created a registry key that forces the file associations as follows:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.doc\shell]
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.doc\shell\open]
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.doc\shell\open\command ]
@="\"C:\\Program Files\\Sun\\StarOffice 8\\program\\soffice.exe\" \"%1\""
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.xls\shell]
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.xls\shell\open]
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.xls\shell\open\command ]
@="\"C:\\Program Files\\Sun\\StarOffice 8\\program\\soffice.exe\" \"%1\""
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.ppt\shell]
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.ppt\shell\open]
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.ppt\shell\open\command ]
@="\"C:\\Program Files\\Sun\\StarOffice 8\\program\\soffice.exe\" \"%1\""

Problem with URL File download

Hi every one i am facing a problem with URL File read Technique
import java.awt.Color;
import java.io.DataOutputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.InputStream;
import java.net.URL;
import java.net.URLConnection;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JProgressBar;
public class JarDownloader
     boolean isSuccess = false;
     public JarDownloader(String url)
          downloadJar(url);
     public boolean isDownloadingSuccess()
          return isSuccess;
     private File deleteExistingFile(String filename)
          File jarf = new File(filename);
          if(jarf.exists())
               jarf.delete();
          return jarf;
     public static void main(String args[]){
          new JarDownloader("url/filename.extension");
     private void downloadJar(String url)
          try
               URL jarurl = new URL(url);
               URLConnection urlc = jarurl.openConnection();
               urlc.setUseCaches(false);
               urlc.setDefaultUseCaches(false);
               InputStream inst = urlc.getInputStream();
               int totlength = urlc.getContentLength();
               System.out.println("Total length "+totlength);
               // If the size is less than 10 kb that means the linkis wrong
               if(totlength<=10*1024)throw new Exception("Wrong Link");
               JFrame jw =new JFrame("Livehelp-Download");
               JPanel jp =new JPanel();
               jp.setLayout(null);
               JLabel jl = new JLabel("Downloading required file(s)...",JLabel.CENTER);
               jl.setBounds(10,10,200,50);
               jp.add(jl);
               JProgressBar jpbar = new JProgressBar(0,totlength);
               jpbar.setBorderPainted(true);
               jpbar.setStringPainted(true);
               jpbar.setBounds(10,70,200,30);
               jpbar.setBackground(Color.BLUE);
               jp.add(jpbar);
               jw.setContentPane(jp);
               jw.pack();
               jw.setResizable(false);
               jw.setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
               jw.setLocationRelativeTo(null);
               jw.setSize(220,150);
               jw.setVisible(true);
               int readlngth=0;
               int position=0;
               byte[] readbytes = new byte[totlength];
               while(totlength-position > 0)
                    readlngth = inst.read(readbytes,position,totlength-position);
                    position+=readlngth;
                    jpbar.setValue(position);
               File jarf = deleteExistingFile(filename);
               jarf.createNewFile();
               //FileWriter fwriter=new FileWriter(jarf,true);
               FileOutputStream fout = new FileOutputStream(jarf,true);
               DataOutputStream dout = new DataOutputStream(fout);
               dout.write(readbytes);
               dout.flush();
               dout.close();
               inst.close();
               jw.setVisible(false);
               jw.dispose();
               isSuccess=true;
          }catch(Exception ex)
               isSuccess=false;
}From the above code i received the total length of the PAGE content (i.e here url is a file) when i tried to find the size of that file it return -1.
please help me

I think the real problem is that you don't check the return value from read (it's probably less than data.length indicating an incomplete read). Isn't there a readFully somewhere?

RH7 problem with FPJ files

We are having a problem with missing files in R7. I've never seen all the files become .FPJ files. They were .htm files and now they are all .fpj - not sure what to do besides change the file extension and try to import all the files back into the project. Our group is quite perplexed.
Result after trying to change file extension:
No success in this.
We still have an output, so we have the .htm files with the content, so we'll be recreating the project.

Suzie
I have created a new thread as your problem relates to RH7, not the RH8 problem that is running currently. Also I have moved it to the RH HTML forum as it is specific to that edition.
I cannot say RH did not do that but I completely fail to see how. Unlike some specialised programs, RH has no function to change file extensions and if reverting it to HTM does not put things right, then I would say something else has clobbered your project.
You say you are going to use the output files. That is not a simple task. The link below explains what you will need to do.
http://www.robowizard.com/RoboWizard/NewProject.htm#MonthlyScry/062004.htm
You will still lose various features introduced in later versions of RoboHelp. My Opening RH Projects may help you there, depending on whether other file extensions have been affected.
Do you not have any backup procedures in place?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Problem with OutBound file binding

Hi,
I have a problem with sun-file-binding for write files in a directory.
I have a service engine that send a message to the file-binding and the binding-component must write the file
on a directory.
But I have this error:
FILEBC-E00791: Solicited Read Failed. service: {http://www.sun.com/jbi/examples/sample-service/echo}echoService2, endpoint: echoEP_JBIPort2, operation: {http://www.sun.com/jbi/examples/sample-service/echo}echo. Error was: FILEBC_E00760: Missing required Input properties for outbound file operation [{http://www.sun.com/jbi/examples/sample-service/echo}echo]..
Consumer:Processing Message Exchange with status Error
The log message is null.
java.lang.Exception: Consumer:INOUT Message Exchange status ERROR.
java.lang.Exception: FILEBC-E00791: Solicited Read Failed. service: {http://www.sun.com/jbi/examples/sample-service/echo}echoService2, endpoint: echoEP_JBIPort2, operation: {http://www.sun.com/jbi/examples/sample-service/echo}echo. Error was: FILEBC_E00760: Missing required Input properties for outbound file operation [{http://www.sun.com/jbi/examples/sample-service/echo}echo]..
at com.sun.jbi.filebc.OutboundMessageProcessor.setError(OutboundMessageProcessor.java:820)
at com.sun.jbi.filebc.OutboundMessageProcessor.processRequestReplyOutbound(OutboundMessageProcessor.java:301)
at com.sun.jbi.filebc.OutboundMessageProcessor.run(OutboundMessageProcessor.java:174)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.Exception: FILEBC_E00760: Missing required Input properties for outbound file operation [{http://www.sun.com/jbi/examples/sample-service/echo}echo].
at com.sun.jbi.filebc.OutboundMessageProcessor.validateOutboundMessageExchangeProperties(OutboundMessageProcessor.java:1499)
at com.sun.jbi.filebc.OutboundMessageProcessor.processRequestReplyOutbound(OutboundMessageProcessor.java:272)
... 2 more
at it.ditech.jbi.component.utils.RingOneMessageHandler.processInOutMessageExchangeOnConsumer(RingOneMessageHandler.java:262)
at it.ditech.jbi.component.utils.RingOneMessageHandler.doInOutMessageExchange(RingOneMessageHandler.java:130)
at it.ditech.jbi.component.utils.RingOneMessageHandler.processInOutMessageExchangeOnProvider(RingOneMessageHandler.java:325)
at it.ditech.jbi.component.utils.RingOneMessageHandler.receiveAndProcessMessageExchange(RingOneMessageHandler.java:355)
at it.ditech.jbi.component.utils.RingOneMessageHandler$1.run(RingOneMessageHandler.java:191)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:619)
this is my WSDL file:
<?xml version='1.0' encoding="UTF-8" standalone="yes" ?>
<definitions
targetNamespace="http://www.sun.com/jbi/examples/sample-service/echo"
name="echo"
xmlns:tns="http://www.sun.com/jbi/examples/sample-service/echo"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:file="http://schemas.sun.com/jbi/wsdl-extensions/file/">
<types>
<xsd:schema targetNamespace="http://www.sun.com/jbi/examples/sample-service/echo">
<xsd:element name="item">
<xsd:complexType>
<xsd:sequence>
<xsd:element type="xsd:string" name="value"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</types>
<message name="echo">
<part name="part"
element="tns:item">
</part>
</message>
<portType name="echo">
<operation name="echo">
<input name="echo" message="tns:echo"/>
</operation>
</portType>
<binding name="Binding" type="tns:echo">
<file:binding/>
<operation name="echo">
<file:operation verb="write">
<input name="echo" message="tns:echo">
<file:message use="literal" fileName="output-%t.xml" fileNameIsPattern="true"/>
</input>
</file:operation>
</operation>
</binding>
<service name="echoService2">
<port name="echoEP_JBIPort2" binding="tns:Binding">
<file:address fileDirectory="/home/roger/Scrivania/in-out"/>
</port>
</service>
</definitions>
Is there anyone that can help me?
Thanks
Roberto

Hi,
I have a problem with sun-file-binding for write files in a directory.
I have a service engine that send a message to the file-binding and the binding-component must write the file
on a directory.
But I have this error:
FILEBC-E00791: Solicited Read Failed. service: {http://www.sun.com/jbi/examples/sample-service/echo}echoService2, endpoint: echoEP_JBIPort2, operation: {http://www.sun.com/jbi/examples/sample-service/echo}echo. Error was: FILEBC_E00760: Missing required Input properties for outbound file operation [{http://www.sun.com/jbi/examples/sample-service/echo}echo]..
Consumer:Processing Message Exchange with status Error
The log message is null.
java.lang.Exception: Consumer:INOUT Message Exchange status ERROR.
java.lang.Exception: FILEBC-E00791: Solicited Read Failed. service: {http://www.sun.com/jbi/examples/sample-service/echo}echoService2, endpoint: echoEP_JBIPort2, operation: {http://www.sun.com/jbi/examples/sample-service/echo}echo. Error was: FILEBC_E00760: Missing required Input properties for outbound file operation [{http://www.sun.com/jbi/examples/sample-service/echo}echo]..
at com.sun.jbi.filebc.OutboundMessageProcessor.setError(OutboundMessageProcessor.java:820)
at com.sun.jbi.filebc.OutboundMessageProcessor.processRequestReplyOutbound(OutboundMessageProcessor.java:301)
at com.sun.jbi.filebc.OutboundMessageProcessor.run(OutboundMessageProcessor.java:174)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.Exception: FILEBC_E00760: Missing required Input properties for outbound file operation [{http://www.sun.com/jbi/examples/sample-service/echo}echo].
at com.sun.jbi.filebc.OutboundMessageProcessor.validateOutboundMessageExchangeProperties(OutboundMessageProcessor.java:1499)
at com.sun.jbi.filebc.OutboundMessageProcessor.processRequestReplyOutbound(OutboundMessageProcessor.java:272)
... 2 more
at it.ditech.jbi.component.utils.RingOneMessageHandler.processInOutMessageExchangeOnConsumer(RingOneMessageHandler.java:262)
at it.ditech.jbi.component.utils.RingOneMessageHandler.doInOutMessageExchange(RingOneMessageHandler.java:130)
at it.ditech.jbi.component.utils.RingOneMessageHandler.processInOutMessageExchangeOnProvider(RingOneMessageHandler.java:325)
at it.ditech.jbi.component.utils.RingOneMessageHandler.receiveAndProcessMessageExchange(RingOneMessageHandler.java:355)
at it.ditech.jbi.component.utils.RingOneMessageHandler$1.run(RingOneMessageHandler.java:191)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:619)
this is my WSDL file:
<?xml version='1.0' encoding="UTF-8" standalone="yes" ?>
<definitions
targetNamespace="http://www.sun.com/jbi/examples/sample-service/echo"
name="echo"
xmlns:tns="http://www.sun.com/jbi/examples/sample-service/echo"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:file="http://schemas.sun.com/jbi/wsdl-extensions/file/">
<types>
<xsd:schema targetNamespace="http://www.sun.com/jbi/examples/sample-service/echo">
<xsd:element name="item">
<xsd:complexType>
<xsd:sequence>
<xsd:element type="xsd:string" name="value"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</types>
<message name="echo">
<part name="part"
element="tns:item">
</part>
</message>
<portType name="echo">
<operation name="echo">
<input name="echo" message="tns:echo"/>
</operation>
</portType>
<binding name="Binding" type="tns:echo">
<file:binding/>
<operation name="echo">
<file:operation verb="write">
<input name="echo" message="tns:echo">
<file:message use="literal" fileName="output-%t.xml" fileNameIsPattern="true"/>
</input>
</file:operation>
</operation>
</binding>
<service name="echoService2">
<port name="echoEP_JBIPort2" binding="tns:Binding">
<file:address fileDirectory="/home/roger/Scrivania/in-out"/>
</port>
</service>
</definitions>
Is there anyone that can help me?
Thanks
Roberto

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Problems with compressing files with right hand click. it does not work.

Problems with compressing files with right hand click.
I am using the compress function in the Mac OS (File > Compress XX) from time to time. Today it does not work anymore. OS 10.5.6
I get a message: The content list cannot be created for compressing.
I tried it with files and folders and keep getting this message. Anybody any idea as to how to fix this

Thanks I love my macbook!!!!
I also got further problems such as copy-paste not working etc.
so I fixed it just this morning by running Applejack 1.5 and am back up running noticing your post.
thanks for helping though!

Problem with Image file

Hi,
Iam facing with one problem.I have one swing interface through which I can upload files(back end servlet programme).Now I can upload all types of file but problem with image file it uploading perfectly that means size of the uploaded file is ok but its format damaged.It can not be open.My backend servlet programme is ok coz i tested it with html form it is working perfectly.Problem with swing interface.Plz guide me where I done a mistake.Below r my codes:-
ImageIcon Upload=new ImageIcon("images/Upload.gif");
     Button=new JButton(Upload);
     Button.setToolTipText("Upload");
Button.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
          int returnVal = fc.showOpenDialog(ActionDemo4.this);
          if (returnVal == JFileChooser.APPROVE_OPTION) {
          File file = fc.getSelectedFile();
String aa=file.getAbsolutePath();
          textArea3.append(aa);
               textArea2.append("Local URL:");
long l=file.length();
          try
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff);
          String str1=textArea10.getText();
url = new URL ("http://127.0.0.1:7001/servletUpload?x="+str1);
     urlConn = url.openConnection();
     urlConn.setDoInput (true);
     urlConn.setDoOutput (true);
     urlConn.setUseCaches (false);
     urlConn.setRequestProperty("Content-Type","multipart/form-data;boundry=-----------------------------7d11e410e500f2");
     printout = new DataOutputStream (urlConn.getOutputStream ());
String content ="-----------------------------7d11e410e500f2\r\n"+"Content-Disposition: form-data;"+"name=\"upload\"; filename=\""+aa+"\"\r\n"+"Content-Type: application/octet-strem\r\n\r\n\r\n"+conffile+"-----------------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);
printout.flush ();
printout.close ();
Best Regards
Bikash

The errors are here:
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff); (conffile is a String object containing the image)
and here:
String content ="-----------------------------7d11e410e500f2\r\n"+"Con
ent-Disposition: form-data;"+"name=\"upload\";
filename=\""+aa+"\"\r\n"+"Content-Type:
application/octet-strem\r\n\r\n\r\n"+conffile+"--------
--------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);conffie is sent to the server but
it's non possible to treat binary data as String!
Image files must be sent as byte[] NOT as String ......

What is the exact problem with this file?

Hi all,
There is an old form , which was not in use from many days.
Now when we tried to run the form, i got the error saying "FRM-40734:Internal Error:Pl/SQL error occured.", in the login form.
When i tried to open the fmb file in Oracle Forms Builder 6i, i got the following error:
FRM-10102: Cannot attach PL/SQL library d2kwutil. This library attachment will be lost if the module is saved., but the fmb file got open.
The login button has the following code:
DECLARE
UNAME VARCHAR2(30);
--USER_ID PARAMLIST;
V_USER APUSERMA.USER_NAME%TYPE;
V_PASSWED APUSERMA.USER_PASSWD%TYPE;
BEGIN
select user_CD INTO :GLOBAL.USER_ID from apuserma
where user_CD = :TI_USER_NAME AND user_PASSWD = :IT_USER_PASSWD
AND SYSDATE BETWEEN USER_VALID_FRM AND USER_VALID_TO;
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
:global.compname := :compname;
compnm(:compname);
--USER_ID := CREATE_PARAMETER_LIST('USER_id_NAME');
call_form('Forms\MAIN_SCREEN',hide,DO_REPLACE);
exception
when no_data_found then
MESSAGE('Incorrect Username or Password. Please Re-Enter');
message(' ');
RAISE FORM_TRIGGER_FAILURE;
END;
EXIT_FORM;
When i tried to compile, i got error saying ,
Error 201 at line 10, column 28
identifier 'WIN_API_ENVIRONMENT.READ_REGISTRY' must be declared.
I am not getting to know What is the exact problem with this file?
Help me with this please.
Thank You.
Oracle forms builder 6i.
Oracle 9i.

Vijetha wrote:
I also want to know what is the use of win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername') ??
What does it do??
If i comment the following line , will it be a problem??
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
Because i commented the above line & compiled, so it is not giving any error now.
So please tell me what win_api_environment.read_registry does??
it's read windows registry value. So, no problem if you comment it.
Thanks

Problem with Receiver File adapter

Hi
I have a problem with receiver file FTP adapter, while writting file in target folder, connection is failing, after retries, it writting file again. How to avoid this situation, is there any way to write the leftout part in the file.
VS

Hi
Thank u all, Problem is solved, i changed write mode to Over write existing file. It is working fine.
VS

Has anyone had a problem with TapMedia File Manage on iPhone 5. I reported a WIFI functionality problem to the developer and asked for support. Instead they have been very unprofessional by name calling me instead of logically evaluate and troubleshoot th

Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem

Hi AKE1919,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy

Problem with AI File extension association

Similar Messages

Maybe you are looking for