Problem with AIR Bundled Distribution on Windows 7 (Error #5100)

We've just finished an application and have set up the bundled distribution for the Installation of AIR and the Application. It works fine on Windows XP, Vista, and too on MAC OS X.
On Windows 7 however, it doesn't install. It loads the installer, and gets to the stage to ask for user options (installation dir etc), and then after this when installing (both AIR and application) - somewhere, it dies with the following error (Error #5100)...
Sorry, an error has occurred.
And error occurred while uninstalling the application. Try uninstalling it again. If the problem persists, contact the application author.
Any solutions to this? Thanks.

Hi,
Is it possible to get the application installer log?
Moved discussion to the Installation Issues forum.
Chris

Similar Messages

Problem with tv@nywhere plus on windows 8

hi
i have a problem with tv@anywhere plus on windows 8. i can setup the pvr plus app completely but when i open that and click on "watch and record dtv program" icon, i will see an error that says: "invalid class string!"
i think this problem should be for its driver because i'm using windows 8 64bit and the driver is for windows 7, i couldn't find an appropriate driver for windows 8 on MSI driver downloads, as matter of fact it didn't exist.
so what should i do for my problem?

I'm afraid TV@nywhere Plus is a bit outdated for Win8. There is no update so far since 2010. Could be MSI won't add Win8 support if it would be anyway possible.

Error message in .docx : 'Open XML file cannot be opened because there are problems with the contents. Details Unspecific error Location: 2'

I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
error, Location: 2'
When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
were illegible, but no other weirdness was observed.
I have microsoft 2008 installed on my Mac OS X version 10.6.8.
I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docx

Hi,
This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
Please use the "Fix it" tool in the following KB article to resolve the problem. See:
http://support.microsoft.com/kb/2528942
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

I am facing problem with adobe illustrator cc in windows 8,it closes automatically after few secons,please help

I am facing problem with adobe illustrator cc in windows 8,it closes automatically after few secons,please help
[ link removed by moderator ]

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

giadad,
It sounds as this issue:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:
https://forums.adobe.com/message/6854594#6854594
It has been described on this Adobe page:
http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/

Problems with AIR-BR1310

Hy,
I have problems with AIR-BR1310.
When the bridge boot this is the sequence on LEDs indication :
Sequence 1: R-blinking green S-blinking green E-off I-red
Sequence 2: R-off , S-green, E -red, I –red
and the sequence continue.
I connected a laptop at console port on power injector but in hyperterminal I cannot see anything.
I changed the power injector and the symptoms was the same.
To function properly the correct sequence 2 for LEDs indication should be:
Sequence 2: R-off , S-green, E-green , I –red
What does it mean?
What i can do ?
It ' s possible to resolve this issue?
Thanks.

Hi,
The below link will answer ur question..
http://www.cisco.com/en/US/docs/wireless/access_point/12.4_21a_JA1/configuration/guide/scg12421aJA1-chap22-trouble.html#wp1099822
lemme know if this answered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra

I have a windows 7 premium with the 64 bit driver and am having problems with installing itunes, i get an error message that states Apple Application Support is required to run itunes. i have tried 4 times to uninstall and reinstall with no success, help

I have a windows 7 premium laptop, 64 bit driver, have tried to install itunes but recieve an error when trying to open. Error states "Apple Application Support is required to run itunes. uninstall and reinstall again, error 2 (windows error 2). have tried this 4-5 times with no success. help!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2

Cinelerra problem with video in the composer window

Hi,
After going through many distributions here I am a happy User's Arch.
One thing I feel very lacking in Linux, even more today that I do not use windows at home for anything is the fact that I can not find video editing software that is really good.
As researched a lot and not found anything that is really good in terms of video editing, I believe that it should meet my Cinelerra nescessidade because he in fact work this transaction and videos, etc ... Despite not liking anything on your interface would be able to use it.
If anyone has any tips please help!
The problem is that some crashes are annoying in the Composition window where it plays the video, it's not like I had with 3D acceleration.
And really annoying, I can not do anything without seeing the video in real time as it's getting and the parties must move ...
I tested several software recommended and one that I liked was the Avidemux which unfortunately does not work with multitrack and has no effect. The demics found it very bug. The Pitivi the crash here whenever I zoom in the video track ...
An error that could not noticing this is in red below when I install Cinelerra.
Continuar a instalação? [S/n] s
:: Obtendo pacotes do repositório extra...
ilmbase-1.0.1-1-i686 313,9K 60,4K/s 00:00:05 [######################] 100%
openexr-1.6.1-1-i686 3,3M 256,1K/s 00:00:13 [######################] 100%
verificando a integridade do pacote...
(3/3) verificando conflitos de arquivo [######################] 100%
(1/3) instalando ilmbase [######################] 100%
(2/3) instalando openexr [######################] 100%
(3/3) instalando cinelerra-cv [######################] 100%
Deps Opcionais para cinelerra-cv
libgl: needed for the X11-OPENGL video driver support
My 3D acceleration is enabled, I have a good hardware ...
Proc: Core (TM) 2 Quad CPU Q8200
Distro: Arch Linux i686 + compiz + gnome (in desperation I tried to disable compiz tb and nothing ...)
Motherboard: Asus P5Q
Mem: 4GB
Video: 9800GT
My video card is properly installed, so that the game Counter-Strike Source online with no problem locking or low performace via Wine.
I made a video also likely to demonstrate better to the problem, note the constant locking Composer window.
If I leave the video running too long, it speeds up from nothing and and then starts playing normally, follows:
http://www.youtube.com/watch?v=Fku-juUTmbU
Sorry for bad english
Thanks!
Last edited by cellexpert (2010-10-07 02:12:58)

Hi,
I noticed that the problem is related to libgl same.
The NVIDIA drivers make a link to this file sombolico thus
lrwxrwxrwx 1 root root 10 Out 10 20:12 /usr/lib/libGL.so -> libGL.so.1
lrwxrwxrwx 1 root root 15 Out 10 20:12 /usr/lib/libGL.so.1 -> libGL.so.256.53
-rwxr-xr-x 1 root root 765460 Out 10 20:12 /usr/lib/libGL.so.256.53
I tried to remove the symbolic link and the program crash when I play the video
I think that's why I can not use other programs that want video acceleration, eg
Pitivi -> lock and close (crash) when I zoom video
Google-Earth -> tb's crash when a dialog will appear (those with balõezinhos info)
There is another that I can not remember now.
I tried using the nvidia driver directly from the site, version 256.53 Geforce 9800 GT
It's the same problem ...
I tried the version contained in the 173 nvidia pacman repositories and it's the same problem.
If someone can give me a help, thank you!
Att

Problem with OEM backing up on windows system.

Hi to all,
I have a problem with backing up with a specific user.
I am currently running various "test" db's and am planning to back them up.
The Setup:
Host OS is windows 2003 server s2
Grid control 10.2.0.1
Database 10.2.0.2
Target Db is running on a windows 2003 server
The Situation:
From grid control I locate the db in question and go to the maintenance page and the backup settings. First of all I want to test the backup using the tab. Before this of course I enter the Host OS credentials into the system, let’s say "jamie", and add the appropriate password. By this point I have made sure that the user "jamie" is in the local security policy setting "log on as batch job" and that is in the group ora_dba (This is on both the machine I am backing up from and the target db machine.). For security reasons I have limited the share folder location to the user "jamie", making sure that sharing and security has the appropriate privileges to access the share.
I run a test backup using the tab within backup settings and await the results. The results come back unsuccessful. Reading through the log I see that the path to backup share is denied.
So to further the test I change the privileges within the share to "everyone" and that is for both sharing and security, just to see whether or not it’s the path itself rather than restrictions to the user. It is then a success. I checked to see who actually owned the file that was used within the test. It belonged to the local system on the target db, not to the user that I had specified within "Host OS Credentials".
Can anyone explain to me why and what is the reason behind putting in Host OS Credentials when the agent that is committing the back up is using the local domain system user account. I am aware that the Agent is part of a service within windows and belongs to the local domain. Ergo, why have host credentials.
And can anyone help me out with getting round this predicament if I still want security within the systems. I can’t just leave access to the share under "everyone", that'd be a really big hole in the system?!
Any help at all will be gratefully received.
If you’ve got any questions to help me solve the problem, please fire away.

You may want to take a look at these metalink notes:
Ref.
Subject:      ERROR in RMAN to Write to Shared Drives on Windows NT/2000
     Doc ID:      Note:246107.1      Type:      PROBLEM
     Last Revision Date:      08-JUL-2004      Status:      PUBLISHED
Subject:      How to Configure RMAN to Write to Shared Drives on Windows NT/2000
     Doc ID:      Note:145843.1      Type:      BULLETIN
     Last Revision Date:      21-OCT-2005      Status:      PUBLISHED
~ Madrid
http://hrivera99.blogspot.com/

Problem with "play to device" on windows media player

Hello, I'm having a problem with the play to device feature of windows media player. I am trying to use it to play music files to my T.V. It works fine if i try to play a single file or a small number of files (50 or so), but if I try to play
my entire playlist (346 songs, if it matters)in this way or a large number of random songs, nothing happens. No error messages or freezes either, it's as if i never clicked play. I thought this might be a limitation with the t.v. or my network
(im doing this via wi-fi) but when i tried this using windows explorer instead of windows media player it worked just fine, and this was with all the music on my computer which is about 3000 songs. Therefore, i know this is a problem with windows media
player and not my t.v., network or computer. This is a problem because i don't want to play all my music, just my playlist. Short of making a separate folder with duplicate files in it for each and every playlist i want to play in this manner(which
is not only time consuming and tedious but takes up space on my hard drive) how do i remove this limitation or otherwise get around it? Thanks!
P.S. Out of curiosity, why does this limitation exist and what causes it?

when i tried this using windows explorer instead of windows media player it worked just fine, and this was with all the music on my computer which is about 3000 songs.
Hi,
According to your description,you said that you used windows explorer.Did you share 3000 songs with your TV?
If so,I think this method is different with "play to" feature.
Also,we haven't found any limitation with Windows media player.
Regards,
Kelvin Xu
TechNet Community Support

I am having a problem with pop pups and small windows with ads constantly opening up on my safari?? Thought that macs didn't get virus? this looks like one- any experts around? please help me fix it with your instructions? really don't know what to do...

Hi everyone,
I am having a problem with my Mac OS X 10.7.5 mac book air , there are constant pop pups and small windows with ads blinking constantly opening up on my safari in front of everything?? it is constantly interupting me and makes me mistakingly click on it then another new windows open behind the one im using..
I am not too sure if thats a virus or trojan.. I always thought that macs didn't get virus? this looks like one to me… any experts around? please help me fix it with your instructions? really don't know what to do... thanks

Those are not viruses. You have probably installed some malware:
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

Problems with Nvidia GeForce 210 and windows 8.1

Hi all, I have Windows 8.1 Pro update 1 64bit installed, two weeks ago I started giving problems graphics card NVidia (even has me
given several blue screen).
I tried to update the drivers for the card but I got the same problem. It was working properly with generic
drivers, and if I went to Computer Administrator me a yellow triangle appeared
on my graphics card and the properties told me the following:
Windows has stopped this device because it has reported problems.
(Code 43 )
My machine is as follows:
Mainboard : Asus P5K SE
Chipset: Intel P31/P35
Processor : Intel Core 2 Quad Q6600 @ 2400MHz
Physical Memory : 3072MB (3 x 1024 DDR2- SDRAM)
Video Card : NVIDIA GeForce 8500 GT
Hard Disk : Seagate ST3320620AS ATA Device (320GB )
Monitor Type: LG Electronics L1919S
I just formatted
the computer from scratch, and
I still had the same problem with the graphics card,
so I imagined it would be a hardware problem
and bought NVIDIA GeForce 210.
In the end I
upgraded to Windows 8.1 update 1 with
the latest drivers for the GeForce 210,
and after 6 days running everything correctly, a few days ago
returned to give me problems,
the screen sometimes freezes and will not
let me do anything and after a while
giving me a blue screen and reboots
me, I suspect that the graphics drivers
are giving me problems, and I had to
disable the graphics card and work with
generic drivers from Microsoft, and even then I
was restarted once.
I installed Driver Booster and all the drivers are updated.
Could
anyone analyze
dump files dmp ? Download here
I got another dmp:
C:\Windows\MEMORY.DMP but it is too heavy.
Thanks

yes, I check the dump files
this cause by graphic card, on which graphic card you reformat your PC and update
.NET framework maybe cause this driver corrupted
my suggestion is try using internal graphic card, just for testing
Just in case you don't believe me, please check this dump file
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 116, {ffffe000d84c4010, fffff800b540be2c, ffffffffc000009a, 4}
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+9bbe2c )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis *
VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: ffffe000d84c4010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff800b540be2c, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000004, Optional internal context dependent data.
Debugging Details:
FAULTING_IP:
nvlddmkm+9bbe2c
fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
CUSTOMER_CRASH_COUNT: 1
BUGCHECK_STR: 0x116
PROCESS_NAME: System
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
STACK_TEXT:
ffffd000`8adadbb8 fffff800`b457bfac : 00000000`00000116 ffffe000`d84c4010 fffff800`b540be2c ffffffff`c000009a : nt!KeBugCheckEx
ffffd000`8adadbc0 fffff800`b457008d : fffff800`b540be2c ffffe000`d760b7f0 ffffe000`d84c4010 00000000`00000001 : dxgkrnl!TdrBugcheckOnTimeout+0xec
ffffd000`8adadc00 fffff800`b4570582 : ffffe000`d760f540 ffffd000`8adadc60 00000000`00000002 00000000`00000001 : dxgkrnl!ADAPTER_RENDER::Reset+0x1f5
ffffd000`8adadc30 fffff800`b457b919 : ffffd000`8ada01b0 00000000`00000000 ffffe000`d5ff91a0 ffffe000`d742b000 : dxgkrnl!DXGADAPTER::Reset+0x416
ffffd000`8adadca0 fffff800`b446cfde : fffff800`b4453c90 ffffe000`d742b000 fffff802`84c1c000 00000000`00000000 : dxgkrnl!TdrResetFromTimeout+0x15
ffffd000`8adadcd0 fffff800`b4453d1d : ffffe000`d742b000 00000000`00000080 ffffe000`d50b4500 ffffe000`00000000 : dxgmms1!VidSchiRecoverFromTDR+0x1a
ffffd000`8adadd00 fffff802`84ceb794 : fffff802`84f69a00 ffffe000`d50b4500 ffffd000`8adaddd0 fffff802`84d7337d : dxgmms1!VidSchiWorkerThread+0x8d
ffffd000`8adadd40 fffff802`84d765c6 : fffff802`84f02180 ffffe000`d50b4500 fffff802`84f69a00 00000000`00000000 : nt!PspSystemThreadStartup+0x58
ffffd000`8adadda0 00000000`00000000 : ffffd000`8adae000 ffffd000`8ada8000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: .bugcheck ; kb
FOLLOWUP_IP:
nvlddmkm+9bbe2c
fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
SYMBOL_NAME: nvlddmkm+9bbe2c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nvlddmkm
IMAGE_NAME: nvlddmkm.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 5315b408
FAILURE_BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x116_image_nvlddmkm.sys
FAILURE_ID_HASH: {c89bfe8c-ed39-f658-ef27-f2898997fdbd}
Followup: MachineOwner
1: kd> lmvm nvlddmkm
start end module name
fffff800`b4a50000 fffff800`b56a8000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue Mar 04 19:07:52 2014 (5315B408)
CheckSum: 00C20523
ImageSize: 00C58000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

W510 problems with Nvidia driver recovery under Windows 7 (64 bit)?

Lenovo W510, Nvidia Qudardo FX 880M video, FHD:
What I'm seeing on occasion is a Windows 7 (64-bit) recovery, screen blanks out, goes 2-3 seconds, then recovers, things go back to normal, but a message displays saying that an error was detected in the video driver, and it has recovered. The new Firefox (4.0.1) seems to be one of the things that may be a contribution, hard to tell. Per System Update at least, I'm current on the Lenovo downloads. SIW shows the driver level as 8.17.12.5738 (2010-06-27). Nvidia web-site shows their current driver level on the wen-site as 270.61 (2011-04-18), which is a considerably newer date at least. So two questions:
Has anyone else seen Driver/Recovery issues on Win 7 (64)
Has anyone directly run the Nvidia video drivers and had them run OK?
Seems like it would be nice for Lenovo to update their drivers, if indeed this is a driver issue, they appear back-level.

I used to have this problem with my W510 running Windows 7 Enterprise 64-bit, especially Firefox 4 crashing the Nvidia display driver almost constantly. I googled and found that this is a known problem between older Nvidia driver and Firefox 4. Later on I downloaded the latest version of Nvidia driver from Lenovo website (it was not posted on the System Update server yet but was available on the regular download site). I clean-installed it (i.e., removing all files and settings created by the old driver) and I haven't experienced the problem since then.
Twitter @thitiv | Work | ThinkPad W520 (4270-CTO) Core i7-2960XM 2.7/3.7 GHz | 16GB Kingston HyperX PnP DDR3-1866
2 x 256GB Crucial M4 & C300 SSDs | Intel Centrino Ultimate-N 6300 | Ericsson F5521gw WWAN | Ultrabay Blu-ray Burner
NVIDIA Quadro 2000M | 15.6" FHD 1920x1080 | ThinkPad Battery 55++ (9-cell) & Battery 27++ (9-cell slice)

I'm trying to update my iphone 3gs with itunes but just getting windows error message

I am trying to update itunes to 5.0.1 version but get an error message at end saying
There is a problem with this Windows installer package, a problem required for this install to complete could not be run.
I am clueless as to what i have to do!

Is your iPhone 4 GSM type or CDMA ?

Problems with a QuickTime movie file. Error 2048 message

I am having problems with a QuickTime file.
The file is on a TDK 4GB pen drive.
I can access the file without problem directly from the pen drive.
I am using a Sony VAIO Laptop running Windows 7.
QuickTime version 7.71.80.42.
When I transfer the file to a folder or upload to send via e-mail on Hotmail and then try to open it I receive an Error 2048 message - "Couldn't open the file.......because it is not a file that QuickTime understands.
Any help would be appreciated.

You should be fine: a standard DVD can contain up to 120 minutes of video, but this includes menus etc.
iDVD is not concerned with file sizes, just length. It will automatically compress the iMovie file to the standard DVD format of mpeg2 - which is 4.7GB for 120 minutes!
I have once made a family DVD 115 minutes long, but after the family either protested or fell asleep, I have tried to keep them under 75 minutes!

Problem with AIR Bundled Distribution on Windows 7 (Error #5100)

Similar Messages

Maybe you are looking for