Problem with Aironet 1130AG after flashing IOS

Worked fine until the IOS was updated with c1130-rck9w8-tar.124-10b.JA3. Since then I'm not able to browse to the GUI interface.
Version info:
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.4(10b)JA3, RELE
ASE SOFTWARE (fc1)
Compiled Wed 19-Mar-08 17:53 by prod_rel_team
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (
fc2)
AP001d.e555.21c6 uptime is 24 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"
cisco AIR-AP1131AG-A-K9 (PowerPCElvis) processor (revision A0) with 24566K/81 92K bytes of memory.
Processor board ID FTX1210T01G
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:1D:E5:55:21:C6
Part Number : 73-8962-12
PCA Assembly Number : 800-24818-11
PCA Revision Number : B0
PCB Serial Number : FOC120724T8
Top Assembly Part Number : 800-29230-01
Top Assembly Serial Number : FTX1210T01G
Top Revision Number : A0
Product/Model Number : AIR-AP1131AG-A-K9
Configuration register is 0xF
Configuration is attached.
Appreciate any assistance in getting this device out of the error state.

Just curious if your AP was originally an IOS AP? The code you used is an LWAPP image and requires a Wireless LAN COntroller. The "rck" in the file name means recovery code for LWAPP. If you need to have an IOS AP, then follow this doc to convert LWAPP back to Autonomous,
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

Similar Messages

  • Problem with referenced libraries (after flash 5.5 trial install/uninstall)

    I've been using flash builder 4 & flash cs5 with on problems.
    I unstalled flash 5.5 trial version to have a play around, then uninstalled it. I also changed the flex sdk version flash builder was using so I could export and test stageVideo.
    Now when making Flash Professional Project in flash builder ( and selectiong and selecting the main fla), the referenced libraries are not imported to the project, and all old predicts ( which have referenced librares and used to work) are looking for swc's held in the 'Adobe Flash CS5.5' folder, and so none of the code hinting is working.
    Help please

    Hi MoTor,
    You would need to uninstall existing Flash Builder 4.5 on your machine and then install Flash Builder 4.6 in trial mode.
    During installation, it doesn't accept the serial number of Master Collection. So, just install it in trial mode and make sure that the you select the same language as that of your Master Collection, during FB installation.
    Now launch FB and it would then accept Master Collection CS 5.5 serial number.
    http://kb2.adobe.com/cps/924/cpsid_92402.html is the related tech note.
    Hope this helps.
    Regards,
    Anand

  • Problems with camera roll after upgrading IOS 8

    Dear All,
    I have a question. After I upgraded my Iphone 6 to IOS 8, some of the photos in my camera library are not exist in my camera roll album but still exist in my photo moments. although the photos are still exist, it bothers me. Can someone help me to explain? how can I recover the photos again to my camera roll album.
    thanks
    reza

    Hi the next thing i would do is Reset ipad back to Factory Settings This will get rid of any bugs. Use the same Apple, id & password then you will get all your Apps & Data back. I Restore, my iphone& ipads about every 2 months if they are slowing down. Since ios 7 i never use my pc for updates almost everything can be done over Wifi we have 2 iphones 3 ipads and we never have any problems. Cheers Brian

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

  • I am having problem with my sound, after i updated to ios 6, apple please help

    i am having problem with my sound, after i updated to ios 6, i can hear music with headphone only, apple please help

    Try going into your settings and 'reset all settings'
    You will need to retweak your device but it's been said to help with sound issues.

  • TS1559 i am have a problem with wi-fi after i update my system to IOS 7.1

    i am have a problem with wi-fi after i update my system to IOS 7.1

    And what would that problem entail?
    Did you look at the link that you tagged?

  • Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

    Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

    Tell Apple about it: http://www.apple.com/feedback/iphone.html
    Be sure to give as much detail as possible.
    I would also check LG's site.

  • Has anyone out there experienced problems with launching apps after downloading the iOS 5.1?

    Has anyone out there experienced problems with launching apps after downloading the iOS 5.1?

    I tried calling support and they want to sell me $79 worth of support in order to get it straightened out!

  • Dear i have a problem with the fingerprint after updating to ios 7.1 when plugged in electricity works like a charm

    dear sirs.
    i am an apple customer since first iphone but right now i am having problems with fingerprint sensor after updating to ios 7.1.
    when plugged to electricity it works but when unplugged sometimes work.
    please solve this issue by a quick update and thanks.

    I have been on the phone twice today with my carrier. They reset it the first time, it worked for an hour then messed up again. They reset it a SECOND time.. It worked for 6 hours, then messed up again. I don't know if this is a software issue or what but if ANYONE has any insight, I would appreciate it greatly.

  • Facing network problem with iPhone 5s after updating it to iOS 7.1.2 .

    Facing network problem with iPhone 5s after updating it to iOS 7.1.2 , using Vodafone in india. if at one place network is full then after few minutes at same place i get no network ? what can be done ?

    Hi srikka,
    I'm sorry to hear about the issues you've been having with the iOS 8 upgrade on your iPhone 5s; I know how frustrating that can be, especially on a device you use every day like a smartphone. If you continue to have issues with your WiFi and cellular data connections, you may find the troubleshooting steps outlined in the following articles helpful:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    iPhone cellular data connection issues - Apple Support
    Regards,
    - Brenden

  • Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    The latest flash player release is 11,0,1,152.
    Can you upgrade to this version and see whether the crash stil exists?
    Go to get.adobe.com/flashplayer to download and install flash player.
    In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
    saranlee wrote:
    My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows  which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

  • Problem with the workbook after upgrade

    Hi all,
    We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts --
    1. What could be the possible reason behind this?
    2. What exactly got changed in the system which reflected this problems?
    3. What other problems might have occurred which we may not have noticed?
    4. How can I find out the number of workbooks affected due to this?

    Dear ,
    This is known issue:
    Please implement the below mentioned note as this will solve your issue,
    Note 1609237 :  Subsequent correction to 1567679
    Regards,
    Arvind

  • Problem with iWeb 09, after the publication in a local file.

    *Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
    After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
    Please help me.

    I want to activate the comments, it doesn't work neither.
    The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.

  • Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

    Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac? 

    Peggy
    You are probably correct. I tried all different variations to test it. As long as I quit each document separately, i.e., red dot it, I seem to bring up only one document after that whether I click on the document itself or open it within pages. The same is true with numbers.
    Two more questions:
    1) can you turn off the "resume" feature? If so, how? I could not find a way to do it.
    2) why the "save a version" feature in pages? What happened to the old "save" and "save as" features?
    Thanks so much, you saved me a lot of frustration but I am still going to install MS Office for Mac.
    Daveben

Maybe you are looking for

  • Deploy Jdeveloper 11.1.2 ADF Application on weblogic 10.3.5 ???

    I don't want to install ADR on my weblogic. how to create ear file having all the required adf jar and war files in it? what is recommended installing ADR on production weblogic server or having ear file containing required war and jar files and why?

  • How can I restrict X11 apps to my primary display?

    The question's in the subject line, but here's why. I have a secondary display attached to my iMac and I find it very useful as a dumping ground for useful ancillary windows and apps. The arrangement of my workspace dictates that the secondary displa

  • External monitor briefly flashes black about once a minute

    Since upgrading to Lion, the external Apple Cinema Display attached to my MacBook Pro flashes to a black screen and back again roughly once per minute. It's maddening and distracting. It seems to happen more frequently when QuickTime Player is active

  • Acct &: Statement & already exists - FF.5

    Hello, I am trying to import an extract using transaction FF.5 to the bank Itau, but this generates the following error "Acct &: Statement & already exists", analyzing realized that this message occurs because the program is trying to contain twice t

  • How do I limit number of emails shown?

    after updating to IOS& my ipads and Iphone 4s show a count of all emails in my POP (Yahoo) account. I am also unable to set the number to download, as was possible with previous IOS versions.