Problem with Airport Express and Ethernet Clients

Hello All, I'm stumped so I hope you can help me out!
I've got a aiport express wirelessly extending an aebs which is creating a network from my isp's router. Everything's working fine. I'm trying to add a Sonos Play5 to the airport express via the ethernet port ( I can't get the Play5 to connect wirelessly). Problems is when I plug the Sonos into the ethernet port the Sonos works fine, but everything else on the network gets booted off. I can't recconnect any of my macs or i-devices. When I  uplug the ethernet cable from the Sonos everything reconnects and works as it did before.
I've got the airport express set to "Extend a wireless network" in the aiport utility.
Any ideas as to what I'm doing wrong?

So my connectivity issues are only when I connect the Play 5 to the AX ethernet port.
That would be the Ethernet port on the AirPort Express then, correct?
If yes, I don't understand why other devices would work when connected to the AX and the Sonos 5 does not. All that I can think of is that the Sonos 5 might require more bandwidth than the wireless "hop" between the AEBS and AX can provide.
In effect, the  Sonos is really connecting using wireless. You are just changing the wireless to an Ethernet connection at the AX to connect to the Sonos product.
If that is the case, then you are going to have to pull an Ethernet cable so that the Sonos 5 connects directly to the AEBS. You can run Ethernet 300+ feet or 100 meters with virtually no loss.
I would recommend that you check with Sonos Support to report your findings during your "tests" and ask them if there is some reason why the connection won't work over wireless.
Please report on your findings.

Similar Messages

  • Problems with Airport Express and Extreme

    I have tried to set up Airport Express and Extreme.  Both proceeded normally in the Air Port Utility until the final stages.  Then it said it couldn't find the devices. When I tried again (many times), I couldn't even start the process, even though it did that the first time for both.  I'm stumped.

    To set up the 802.11n AirPort Extreme Base Station (AEBSn) as a bridge, either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the AEBSn, and then, using the AirPort Utility, make these settings:
    AirPort Utility > Select the AEBSn > Manual Setup > Internet > Internet Connection tab
    Connection Sharing: Off (Bridge Mode)
    Click Update to apply the new settings
    AirPort Express Base Station (AX) - iTunes Setup
    Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
    AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <existing AEBSn's wireless network>
    Wireless Security: <select the encryption type of the existing wireless network>
    Wireless Password: <enter the existing wireless network password>
    Verify Password: <re-enter the existing wireless network password>
    AirPort Utility > Select the AX > Manual Setup >Music
    Enable AirPlay (checked)
    iTunes Speaker Name: <enter desired speaker name>
    iTunes Speaker Password: (optional)
    Verify Password: (optional)
    Click Update to write the new settings to the AX

  • Problem with Airport Express and HP PSC 1410

    Please I really need help. I just bought a HP PSC 1410 (all in one) and I connected on Airport Express and I can't print trought it. I tried to connect it by USB and it work perfectly. When you want to had the printer in printer utility you can find the right driver for the printer. Rendez-vous can find it but you can not install it...
    I tried many different way but it never worked.
    please help me ???

    I suggest you return the PSC1410 for refund, or for credit towards the purchase of another printer. This printer will not work when connected via an Airport Express. When you purchase your next printer, chose one found on the unofficial compatibility list at http://www.efelix.co.uk/tech/1013.html
    In general, all-in-one printers are poor choices for connecting via an Airport Express. Even if you do get them to work, you can only make use of their printing function.

  • Problem with Airport express N (2nd gen)

    Problem with Airport express N (2nd gen)
    Firmware 7.6.4
    ISP - 20 Mbps ethernet cable
    I have MacBook Air 13 mid 2013 os x 10.9.5, ipad 4 ios 8.0.2, ipad4 ios 7.1.2 , iphone 5 ios 7.1.1
    When i try to use speedtest.net from my Macbook i got good results of download speed and incredible upload http://www.speedtest.net/my-result/3801286946 (connection 300 Mbps) , both ipads got terrible speedtest download result and incredible uploadhttp://www.speedtest.net/my-result/i/981631804 (connection 150 Mbps), iphone 5 got bad download and great uploadhttp://www.speedtest.net/my-result/i/981695357.
    All these tests were done near airport express with really good signal and 5ghz. I tried to choose different channels, 802.11 mode, guest ssid, 5ghz ssid ...
    I think that something is wrong with my new airport express. Can anyone help me to solve this problem?
    ps sorry for my bad english

    As a last resort, try a factory default reset on the AirPort Express as follows:
    Power off the AirPort Express
    Wait a minute
    Hold in the reset button first, and keep holding it in for another 8-10 seconds while you simultaneously plug the Express back in to power
    Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light status
    On an iPhone or iPad home screen....
    Tap Settings
    Tap WiFi
    Look for a heading of Setup a New AirPort Base Station. If it appears.....
    Tap on AirPort Express just below the heading to start the configuration process on the Express again
    If you try several factory default resets, and the AirPort Express does not appear under the heading of Setup a New AirPort Base Station, the Express most likely is defective and will need to be replaced.

  • WDS with Airport express and Dual ethernet Airport base

    Can the airport express and dual ethernet airport base create a wds? I can't find the options on the airport base's software.

    coloradoapple, Welcome to the discussion area!
    The Dual Ethernet (snow) AirPort base station (ABS) does not support WDS.
    Only the AirPort Extreme base station (AEBS) and AirPort Express (AX) support WDS.

  • Problems with Airport Express in Router mode

    Hi all!
    I have an Airport Express and a PC home network (WinXP, Win2k and one Powebook). I have Itunes turned off and updated the firmware to 6.3. My Test PC is updated with all the latest updates. All of the Computers have Wifi G cards and are switched to Windows XP zero config wireless.
    I tried to configure the AP express both with the config wizard and the manual Airport admin utility on several computers. I have it configured to 128bit WEP security.
    I have no proxies or anything of that kind. Also tried disabling all firewall software.
    I have a DSL connection with Aztec DSL600E Modem which was previously configured as a fixed line router (its not wireless).
    I spent days at it but could not get the AP to replace the modem as router. The modem is configured to use PPPOE/PPPOA (tried both).
    When I configure the modem to stop being a router (I think this is done by selecting its "Server and Relay Off"
    option (it has either Server on, Realy on, or the above) in the Modem's DHCP configuration screen.
    Well when I do this, and configure the AP to distribute IP addresses (share a single IP) and "connect using PPPOE" connection, its light goes green but none of the computers can browse the internet, it just goes to "page not found" after a while. The PC's also then report a conflict in IP address.
    On the other hand, if I restore the modem to act as router, configure the AP as a Wifi bridge-to use Ethernet and not to distribute IP's, internet does work but slower than normal. (Not bandwidth, its the DNS lookup that slows things down I think, whenever trying to go to a new web address it takes several seconds to look it up before it says "web page found" on the bottom of the IE browser). If I disconnect the Wifi and connect one of the clients directly to the DSL modem, the DNS lookup takes seconds.
    I tried clearing the Cache, resetting the AP, doing IPconfig /release and /flushdns etc.
    Internet speed tests like DSL Speed test report latencies of 800ms sometimes.
    So i'm thinking that there is some conflict in the DNS or DHCP between the modem/router and the AP.
    What is better? leave it as is or try to get the AP to act as router and the modem as only a modem?
    All of my clients are set up to have automatic TCPIP configuration with DHCP.
    Also I wanted to ask:
    1) What does "domain name" and "DHCP client id" in the AP Admin utility / internet tab?
    My modem config screen has a "Management IP" section with:
    IP Address: 10.0.0.138
    Netmask: 255.0.0.0
    Default Gateway:xxxx
    Hostname: xxxxx
    Domain Name: xxxx
    Are the last two the same as the AP refers to as domain name as DHCP client ID?
    and why do I need a domain for just a home network?
    and why are the last two fields full in the modem screen if I don't have a domain?
    2) From what I remember of routers, they should have some place of configuring the peer to peer network name (workgroup) is that what they mean by "hostname" or "domain name"?
    The problem is that this Aztec model has no online manual. And the other models Aztec manuals don't go to such advanced details. And my ISP doesn't give support for sharing with routers (it is allowed but not supported). They will just say buy our monthly plan with WIFI etc.
    I would like to share files as well as internet access.
    3) What does the "Enable default host" option mean in the AP config network tab?
    4) What does the "Relay on" field mean in the Modem/router DHCPConfig screen?
    5) How do I ensure there is no conflict between the AP and modem/router, and that they use the most efficient method for looking up DNS's?
    Attached are links to screenshots of my configurations.
    http://new.photos.yahoo.com/nebula3012/album/576460762403680970
    (double click the pics to open them).
    It seems so complicated, a few years ago I set a 3COM Wifi router in a PC environment (Cable Internet) and was working within hours.
    by the way in the AP config summary it all looks normal except the "LAN MAC Address" which is empty.
    Thank you for your help... ** really..

    nebula3012, Welcome to the discussion area!
    1) What does "domain name" and "DHCP client id" in the AP Admin utility / internet tab?
    If those items are needed, your ISP will provide them to you.
    2) From what I remember of routers, they should have some place of configuring the peer to peer network name (workgroup) is that what they mean by "hostname" or "domain name"?
    No
    3) What does the "Enable default host" option mean in the AP config network tab?
    It allows you to configure a device as a server. All of the ports of that device will be directly addressable from the internet.
    5) How do I ensure there is no conflict between the AP and modem/router, and that they use the most efficient method for looking up DNS's?
    You worry too much. There is nothing special to do.

  • Problems with Airport Express

    Sunday morning blues!! For some reason when I connect to my airport express it disables my internet access....??? I am using a speedtouch USB modem and connecting to the internet via Virgin broadband. With Airport switched off Safari works fine, as soon as I connect to the express the internet connection is lost and safari directs me to the network diagnostics utility, which just tells me that the network connection and the airport connection have both failed. Can anybody help??

    Sunday morning blues!! For some reason when I connect
    to my airport express it disables my internet
    access....???
    The problem you have is that you can't have two network connections (the USB one and the Airport) active at the same time.
    Can anybody help??
    The solution though is as follows.
    System Preferences > Sharing > Internet
    Share your USB internet connection via Airport.
    This configures the Mac as a software base station.
    Re-configure the Airport Express as a client for this Mac based wireless network.
    You will then have an active internet connection and be able to print wirelessly and use AirTunes.
    Personally I would recommend you replace your USB modem with an ethernet (wireless) modem instead.
    Check out the following website.
    Reviews of equipment
    http://www.adslguide.org.uk/reviews/
    I would also check out ADSL Nation's X-Modem M3 http://www.adslnation.com/products/xmodem-m3.php It is also now available from the UK Apple store and retail stores.
    http://store.apple.com/Apple/WebObjects/ukstore?productLearnMore=TJ151
    which can also be used in conjunction with an AEBS or AX.
    iFelix

  • How to extend wireless with airport express and time capsule

    So, I have a time capsule & because of the thick walls in my apartment, I can barely use my ipad and iphone at night in my bedroom! (my macbookPRO stays at 3 bars however!)
    I bought an airport express thinking I could plug it closer to or inside my bedroom to boost the signal - but it doesn't seem to work that way - any tips on how to set this up?
    TWO ADDITIONAL Qs:
    Does connecting directly to my time capsule (which i'm assuming i'd need another ethernet cable) help with the boost? (then negates the other great uses for the airport express it seems)
    Isn't there a way to do the boost with the express wirelessly? I'd really love to get wireless speakers, use airplay AND be able to use my devices just two rooms away ....   HELP!
    thanks so much (when did apple phone support start to be closed on Sundays?)
    cheers.

    Suggest that you check your setup again to make sure that the settings are correct on both the Time Capsule and AirPort Express.
    Open AirPort Utility, select the Time Capsule and click Manual Setup
    Click the Wireless tab below the row of icons
    Make sure that a check mark is entered next to "Allow this network to be extended".( If the box is not checked, the Time Capsule will not extend to the AirPort Express)
    Click Update to save your settings and close AirPort Utility
    Next, open AirPort Utility again, select the AirPort Express and click Manual Setup
    Click the Wireless tab
    Settings should look like this:
    Wireless Mode = Extend a wireless network
    Wireless Network Name = Same name as the Time Capsule network
    Check mark entered next to "Allow wireless clients"
    Wireless Security = Same setting as the Time Capsule
    Wireless Password = Same password as the Time Capsule network
    Confirm Password
    Update to save settings and close AirPort Utility
    Locate the AirPort Express approximately half way between the Time Capsule and area that needs more wireless coverage. You may need to experiment on placement to find the best compomise.
    Post back on your results.

  • Itunes 7.7 - problem with airport express remote speakers

    I upgraded to 7.7 and when I try to connect to my remote speakers, itunes either does not play or the sound cuts in and out. Anyone have any suggestions?
    Duq

    Having the same problem have 2 Airport Expresses and have problems with one of them locking up and not appearing on itunes or in the airport utility anymore.
    Switching it to ethernet usage to see if that helps or will try factory reseting it next.
    Have already tried hard and soft resets.

  • Need help with Airport Express and so on.

    Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
    My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.

    DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
    The AirPort Extreme base station (AEBS) is a router so it will do what you need.
    You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection.

  • Extending network with Airport Express and Airport Extreme (latest models) causes chaos on network

    Today I upgraded from my several year old Airport Extreme (3rd gen) and 2nd gen Airport Express to a new (what you'd buy on the shelf today) Airport Extreme and Airport Express.  All airports are updated with the latest firmware and I'm using windows 7 for configuration.
    The intention is to use the Airport Extreme as the main router, also serving wifi. And extend the network using the express. As such, the following has been done:
    The Airport Extreme is configured for automatic channel, and automatic radio mode. I tried to select 802.11n 5 ghz and 802.11 n 2.4 ghz only, but it won't take the changes. Additionally, it wont' accept me using only channel 6. Not sure why, but I digress. The airport extreme is not set to broadcast a separate name for the 5ghz network.
    The Airport Express is configured to use bridge mode, use an existing wireless network and is connected to my network on it's WAN port (the circle icon on the back) with ethernet. The password and wireless name used in configuration is the same as created initially on the Airport Extreme.
    Initially I did the configuration of both airports on my computer, connected by ethernet to ensure stable connectivity while I inputted settings. During this, they appeared to accept the changes fine. However, when I moved the airport express to it's destination (other side of my house), the entire network went crazy.
    Internet became slow, and often wouldn't load pages. This was on wired and wireless connections. When I attempted to administer the Airport in the Utility, they would not load, an error would occur. Also, at one point the Airport Extreme had renamed it self with a (2) at the end. Which was super odd. So far, the only solution has been to unplug the Airport Express and attempt to devise a solution.
    Anyone have any ideas? Of course, I will continue to tinker with this, but it seems realllly strange. The previous setup was also extended (granted, using wireless only, not ethernet > wireless) and worked fine, granted it was a smidge slow, but it worked.

    I wanted to add this.. I followed the guide here: http://support.apple.com/kb/HT4260 to extend using ethernet, and the above is the result.
    I just tried re configuring in OS X Mavericks and got the same, odd, result.

  • WiFi problem with Airport Express

    Several people visiting my apartment aren't able to navigate the Web or use Email over my WiFi Network. I'm guessing it's a DNS, IP or proxy issue as they're able to use Skype on their phones over my network, but nothing else. What could be causing this? I just recently set up this new Airport Express and I'm able to navigate, etc just fine with all of my devices (but I should note that I have specific DNS address set on all of them, since I use a DNS service).
    I never had this problem before with my old Time Capsule. Started happened after I switched over to the Airport Express.
    Thanks

    Perform the Factory Default Reset one more time. Hold the reset button until the amber light has been blinking rapidly for 8-10 seconds before you release the reset button
    Run the setup wizard, and wait for screen similar to this to appear, then click on Other Options:
    Select the Add to an existing network option, then click Next and follow the prompts.
    If you are still having difficulty, try running the setup utility on an iPhone or iPad, since Yosemite has a number of bugs in the setup process.

  • WDS setup with Airport Express and other(non-Apple) wireless router

    Hi,
    I am trying to configure a wireless network with one airport express and one Planex Wireless access point. Can anyone please point me to the settings to be made for such a scenario? I can use either of them as the main WDS device, and have a (wired)router provided by the ISP in the network.(so total 3 devices : airport, planex a/p , ISP router)
    Thanks.

    I'm having the same problem, both with a Linksys WRVS4400Nv2, and a WRT54G. I've not put much effort into the WRT, but the WRVS was such a pain that I don't think I can get it to work at all.
    The WRT doesn't have a section on WDS, but I've read that it's supported anyways, and nothing needs to be enabled on it. Is there a good step-by-step available here or elsewhere that uses close to the same router and Airport Express units, on the latest Airport setup software?
    Basically, I'm trying to set this up for a guy in an ~8000 sq. foot house so he has wireless throughout it, and he wants itunes streaming from the AX. Has anyone done this?
    Message was edited by: manderso

  • 3 powerline adaptors with airport express and extreme

    Hi all,
    I am currently using two airport express and 2 TP-LINK powerline adaptors to create a "roaming" network, however i would like to add another powerline adaptor and an airport extreme to my network.
    Modem -> Airport Extreme in the living room with an ethernet cable plugged into the powerline
    1st Airport Express plugged into the 2nd powerline adaptor
    3rd Airport Express plugged into the 3rd powerline adaptor
    so my question is will the above setup work? or do i need to connect another powerline adaptor into the main Airport Extreme making the whole network use a total of 4 powerline adaptors? however if only a total of 3 powerline adaptors are required, would the network be confused and render the whole network useless?

    To set up the 802.11n AirPort Extreme Base Station (AEBSn) as a bridge, either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the AEBSn, and then, using the AirPort Utility, make these settings:
    AirPort Utility > Select the AEBSn > Manual Setup > Internet > Internet Connection tab
    Connection Sharing: Off (Bridge Mode)
    Click Update to apply the new settings
    AirPort Express Base Station (AX) - iTunes Setup
    Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
    AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <existing AEBSn's wireless network>
    Wireless Security: <select the encryption type of the existing wireless network>
    Wireless Password: <enter the existing wireless network password>
    Verify Password: <re-enter the existing wireless network password>
    AirPort Utility > Select the AX > Manual Setup >Music
    Enable AirPlay (checked)
    iTunes Speaker Name: <enter desired speaker name>
    iTunes Speaker Password: (optional)
    Verify Password: (optional)
    Click Update to write the new settings to the AX

  • Hi-fi separates with Airport Express and Airtunes

    Hi, please could you tell me whether it is possible to use a hi-fi separates system with airport express? it doesnt seem possible to me but i thought i would ask.
    regards
    ste bond

    Ah. Much clearer to this antipodian now
    If you have a look at page 15 of the Setup Guide for Airport Express, available at http://manuals.info.apple.com/en/AirPortExpressSetupGuide.pdf - it shows the connections it can be made to plug into.
    Every hi-fi system I've seen has stereo RCA jacks (red and white plugs) on the back for accepting auxiliary inputs. You'll just need to get the appropriate cable from your supplier of choice. If you system is more modern, using fibre optic cabling may be a better option (avoids ground loops, avoids multiple analog/digital conversions, etc).
    You can only use iTunes to send sound to the Airport Express, unless you get a third party application like AirFoil (from http://www.rogueamoeba.com/airfoil/ ), so technically "what I like" would need to be restricted to that which you had in iTunes, but basically, yes.

Maybe you are looking for