Problem with airprinting between HP 7510e and ipad2

Have just installed HP7510e printer. I am unable to print directly from ipad to printer.
Ipad recognises that printer is available on network and says "contacting printer", then nothing except silence.
I can send emails from ipad to printer using HP ePrinting OK, but nothing else.
Any suggestions please?

Hi Aggroman,
Try clearing the print queue on your iPad:
1. Press the button on the front of the iPad twice quickly so that it brings up a row of icons across the bottom of the screen.
2. If you see an icon titled "Print Center," open it and delete all jobs showing.
3. Try to Airprint again.
If this does not work. Follow the steps again to clear out the latest job and then power cycle your router and printer:
1. Remove the power cord from the back of your router.
2. Turn off the printer.
3. Wait 30 seconds.
4. Plug the router back in.
5 Wait 30 seconds.
6. Turn the printer back on.
7. Try to Airprint again.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say Thanks
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Similar Messages

Problems with ipod synching between pc desktop and mac laptop?

Has anyone had any problems trying to synch their ipod in both a windows desktop version of itunes and a mac laptop version of itunes? if it is all ready synched with windows will it be compatible to synch to a mac laptop?
thanks

Click here and follow the instructions; Windows formatted iPods can be synced by the Mac version of iTunes, but not have their firmware updated without a restore except in the case of the iPod shuffle.
(27767)

Problems with the link between PXI chassis and PC via MXI-4

MAX display the chassis with a yellow exclamation point, and the MXI-4 conection monitor indicates taht the connection to the chassis has timed out.
Under the windows device manager appears PCI std PCI-to-PCI bridge and MXI-4 connection monitor working properly.
The system has bben working properly for one year and suddenly start to fail.
I've tried to uninstall fromn device manager and reinstall again, and teh problem continues. When the PC starts detect new hardware and reinstall from CD with MXI-4 software for windows v 1.0
Only the led PWR lights. The link indicator remains always off, from power up continuously. The cable connection has benn checked ok.
The chassis is powered up in the proper sequence, first the PXI chassis, and the the PC.
Operating system windows XP service pack 2; latest update KB835732 30/12/2004 (V 6.2)
labwindows/cvi (fds) 7.0
ivi compliance oackage 2.1.2
max 3.1
ni-daq 7.3
visa 3.1
chassis pxi-1000b with PXI-8331.

Hello,
it could it be an incompatibility with the desktop PC (maybe?). I know of cases in which the PCI board can be incompatible with a certain PC for various reasons (PCI bus not 100% compliant to PCI standards, PCI power rails, PCI bus-master capabilities, motherboard/chipset issues, etc..).
I mean, has the PC been changed?
Wich PC model/brand is it?
Have you tested it on another of PC (another model)?
In case you have already tested your mxi-4 in other PCs and the behavior is the same, I suggest you to contact your local NI office for assistance.
Regards,
Jorge M.

Problems with wireless connection between new macbook and older imac

I have just bought a 2.0 ghz macbook core2duo and am unable to connect to my wireless internet network at home. My wireless connection is set up through the airport card in my 17" flat panel imac (i.e. I am using the imac as the internet base station). I had an old clam shell macbook (which just died hence the new macbook) and still have a 400 mhz graphite SE iMac which both connec(ed) to the network perfectly for years. But the new macbook will not connect. It will connect when connected via ethernet. The imac uses Tiger.
I have tried resetting the name of the network, using encryption and not using encryption, but nothing helps. The macbook appears to see the network (although no bars register in the airport connection icon) but I always get an error message when trying to connect.
Does anyone have any ideas?
Thanks

I am not actually using a router as I am using the airport card (non express i believe) in my iMac to send the wireless signal. My modem is Motorola but not sure which model. I have Comcast cable internet service
Nick

Problems with Dinamic Link between Premiere pro CC and After Effects CC

I'm having serious problems with dinamic link between premiere pro and after effects, really serious problems that have 2 big projects in trouble (a documentary and a video clip) and I had to redo all the work pipeline to the consumer.
The documentary for a spanish TV was made on CC 2014 and a video clip was made on CC. Both of them with a lot of after effects composition in the premiere pro timeline. Render freeze, a lot of playback issues, and many more problems... Until I decided to remove these links between premiere and after effects and render out all the after effects compositions one by one and insert as clips in premiere pro. 1 week working away with back and fourth.
I've got a huge workstation:
i7 4990
32Gb ram
GTX780 3gb
256 gb system ssd
2 Tb project storage
*All my hardware and software are update.
I know that a lot of folks are on the same huge problem and I want to ask everyone:
How do you save this?
What is your pipeline?
Are there any solution?
Best practice to use dinamic link in a huge project?
Thanks,
Ruben Gimenez.
R&D iceblink.es
www.rambot.es

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years, I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?

In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I Have A Problem with Bluetooth connection between my I-Phone and Bluetooth in my auto

I have a problem with bluetooth conection between my auto (2013 Buick) And I-phone 5. I can call out but am unable to recieve incomming calls.When I attempt to answer ,Everthing disconnects and the phone call goes to mail automatically.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Problem with sharing files between mac and pc

hi i have been having an issue with file sharing between my mac and pc. my pc running windows 7 can connect to my two macs running mavericks (mbp and mini) but i cannot connect to the pc from my macs. i have file sharing using smb setup on my macs as well as the workgroup setup. i can see the pc in my finder shared tab but when i enter the username and password it loads like its trying to connect and then says cannot connect or sometimes makes you re enter the password and still nothing. i also tired connecting through finder go tab and connect to server but when i type in my ip it asks to input the user and password but wont accept it it just shakes and deletes the text in the user and pass fields. on my pc i have file sharing enabled and like i said i can access my macs no problem. i will give a quick guide of how i try to connect
Pc name is RAID-PC
my admin account name is RAID
pass is: dapice (not actual)
ip address 192.168.2.20
when I click on the raid pc under the shared tab in finder i put as the user RAID and pass dapice ....doesn't work
under the finder go tab connect to server i put smb://192.168.2.20 then push the + and then connect enter RAID as user and dapice as pass... unsuccessful
i have tired reinstalling windows 7 didn't help i tired installing windows vista and also didn't work
i have reinstalled mavericks and that also didnt work
i have spend HOURS looking for the answer and trying all different this with no success any help will be appreciated

when i go to enter the username and pass it just shakes and makes me re enter
here is some screen shots from what happends
that is for trying to connect through shared tab and thi is through connect to server
after i push connect it shakes and stays the same

Problem with config sync between two CSM-S modules

Hi everybody,
I have a problem with config sync between two CSM-S modules.
I am using CSM-S software version 2.1(8).
The acitve module is used in a 6509 with WS-SUP720-BASE supervisor running software version 12.2(18)SXF12a.
The standby module is used in a 6509-V with VS-S720-10G supervisor (no VSS setup) running software version 12.2(33)SXI3.
Failover seems to work fine:
switch-active#sh modu csm 2 ft
FT group 1, vlan 398
This box is active
Configuration is out-of-sync
priority 150, heartbeat 3, failover 40, preemption is on
switch-standby# sh modu csm 2 ft
FT group 1, vlan 398
This box is in standby state
Configuration is out-of-sync
priority 80, heartbeat 3, failover 40, preemption is on
The command (on active side) "hw-module contentSwitchingModule 2 standby config-sync" leads to following result:
switch-active:
2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56042: Apr 14 16:21:44.223: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Bulk sync started
2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56043: Apr 14 16:21:44.251: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configurations to Standby CSM, this may take several minutes!
2010-04-14T16:21:46+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56044: Apr 14 16:21:45.995: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:21:51+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56045: Apr 14 16:21:50.831: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:21:57+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56046: Apr 14 16:21:56.151: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56047: Apr 14 16:22:58.791: %CSM_SLB-3-REDUNDANCY: Module 2 FT error: Active: Manual bulk sync timed out
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56048: Apr 14 16:22:58.803: %CSM_SLB-3-REDUNDANCY: Module 2 FT error:
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56049: FT CONFIG SYNC: Failed config sync entity send
switch-standby:
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2475: Apr 14 16:21:44.232: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Bulk sync started
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2476:
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2477: Apr 14 16:21:44.240: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: STANDBY:Configuration is being received, This may take several minutes!
2010-04-14T16:21:49+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2478: Apr 14 16:21:48.824: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
2010-04-14T16:21:54+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2479: Apr 14 16:21:53.964: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2480: Apr 14 16:21:58.852: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Started clearing configuration
2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2481: Apr 14 16:21:59.400: %CSM_SLB-4-REDUNDANCY_WARN: Module 2 FT warning: Standby: Config Sync does not save running-config to startup-config
2010-04-14T16:22:00+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2482: Apr 14 16:21:59.400: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Previous configuration are being deleted from supervisor
The last log message on standby device seems to be correct - there is no CSM configuration after the attempted config sync.
Our configuration includes about 3500 lines and it is really uncomfortable to keep in sync manually.
Maybe someone has the same problem?
kind regards,
Christoph

Hi Christoph,
I am running into the exact same issue. Upon further investigation I've discovered that this is a known bug, CSCtd09117. You can read more about it here: http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd09117 . Apparently this is fixed in ver 12.2(32.8.11)SX323 .
I haven't had a chance to upgrade yet, so I can't verify the fix, but if it works for you please let me know.
Regards,
Brandon

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
Paolo

Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.

There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer?

I have a problem with simulation in Matlab 6.5 and LabVIEW for PID controllers

I have a problem with simulation in Matlab 6.5 and LabVIEW. I have some methods for granting PID controllers in MATLAB to go but not LabVIEW. International Teams degree to transfer two but when I go past the fourth degree no longer work. We changed the formula for calculating the parameters for grade four and gave me some good values for Matlab award but when I put on LabVIEW have not settled. formulas are available in PDF and are. Please help me and me someone if possible. Thanks
lim.4 generation parameters in MATLAB program and comparison methods are for second-degree transfer function.
Solved!
Go to Solution.
Attachments:
Pt net.zip ‏2183 KB

This is the VIs what i try to make,but is not work. This pdf. document was used to create last VIs PID. thenk you for your colaboration.
Attachments:
PID create by me.vi ‏312 KB
tut_3782.pdf ‏75 KB

Problem with airprintin​g between HP 7510e and ipad2

Similar Messages

Maybe you are looking for

Problem with airprinting between HP 7510e and ipad2