Problem with alarms in clock app

I set an alarm for 7:30 am for Saturdays and Sundays, but the alarm sounds at 6:30. it shows up as "weekends" properly, and my phone is set to the correct time and time zone and daylight savings is correct. I checked to make sure that it was from the apple clock app by changing the sound, and I tried deleting and adding a new alarm, but it keeps going off an hour early.
is there a better solution than switching to a 3rd-party app?

I'm having this exact problem too

Similar Messages

Problem with Timer in Clock app in IOS 8

I've noticed an interesting change, a bug I suspect, in the Timer part of the Clock app in IOS 8. If I set a timer for say, 5 min, and I happen to check the timer before the alarm sounds, so it is showing on the iPhone, the alarm goes off, But I cannot stop it, cancel it, whatever. I have to go back to the home screen to tap done. This wasn't the behavior before. I suspect is shouldn't be now. Anyone else seen this? Any ideas on how to fix it?

I have a reproducible bug with the alarm in iOS 8.0.2 on iPhone 5. If the alarm goes off when the phone is sleeping I normally can silence in 3 ways: 1) use "tap to stop" on lock screen; 2) use power button to return to sleep mode; 3) use vibrate switch to turn ringer off. However, if I inadvertently swipe down to access notifications when the alarm is going off, when I return to lock screen the alarm can no longer be silenced by 1 & 2 listed above (only 3 will work). Powering off will also work, although I have read here that some are having the alarm remain on even after reboot. I can reproduce this problem as often as I attempt.

I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

I'm going to guess videos buffer for a while also...
Two possibilities, one is you should close apps on the iPad, the other is your internet speed is not able to handle the demands of a high speed device.
To close apps: Double click home button, swipe up to close the apps.
To solve internet problem, contact your provider. Basic internet is not enough for video games and movies. Your router may be old and slow.

HT5137 I made a purchase with my debit card on The Simpson Tapped out game, And now my game won't open. It just kicks me out every time I click on it. How do I fix this problem with out deleting my app?

I made a purchase with my debit card on The Simpson Tapped out game, And now my game won't open. It just kicks me out every time I click on it. How do I fix this problem with out deleting my app?

Personally, I would never use a debit card online, for security reasons. If your card gets hacked its your money that is stolen. At least with a credit card it is the card providers money that is stolen.
Anyway, I would delete the app and re-install. If you paid for the app in the first place you will be able to re-install free of charge. Also, the app should allow the in-app purchase to happen again as it should recognise that you have already purchased it previously.
Finally, it might be that the 3G doesnt have as much ram as more recent models of iphone and you may have applications running in the background that are preventing the app to function with the in-app purchase unless you shut down any apps eating all you memory that are running in the background. Shut-down these apps (and the simpson tap out app) by exiting to your home screen and double-tapping the home button to show what apps are running in the background. press and hold any of the open apps until it starts shaking. close all the apps down. exit then re-launch the app.
good luck.

Hello I have a problem with a Wifi Survey app, this app is from Access Agility, however this app was working fine, but without advise stop of working, I tried to open again, but app be close after few seconds.

Hello I have a problem with a Wifi Survey app, this app is from Access Agility, however this app was working fine, but without advise stop of working, I tried to open again, but app be close after few seconds. Every time that I tried to open it, in diagnostic and use create some files, in special one named LatestCrash-WifiSurvey.plist, this one generate an incident identifier E73B0164-CDFA-4E9E-839E-A0C021BD17A2, but this incident identifier change every time that I tried to open, the last incident identifier is: DE600EB3-AB57-4C33-8DE8-71F6788A7441.
After of it, I checked that the app had a new version available for downloading, I took a backup of my ipad and then upgrade this app, but is the same problem, all I want is to save the projects I had in this app, I´m afraid that if I delete this app and re-install it, probably I loss my projects.
Thanks for your help indicating how I can save my projects and see them for example in an iphone for assurance that data is not lost.
Something that called my attention is part of the log that shows a big CPU processing, but the strange thing is I killed all applications.
Incident Identifier: E73B0164-CDFA-4E9E-839E-A0C021BD17A2
CrashReporter Key:   ed0ca1405ce83d4f80cb3cce063d7248d7b76e91
Hardware Model:      iPad2,5
Process:         WifiSurvey [139]
Path:            /var/mobile/Applications/1BEEE35A-85FC-4BE4-B62A-39A930CB3CE2/WifiSurvey.app/Wi fiSurvey
Identifier:      WifiSurvey
Version:         ??? (???)
Code Type:       ARM (Native)
Parent Process: launchd [1]
Date/Time:       2013-08-08 19:01:13.476 -0500
OS Version:      iOS 6.1.3 (10B329)
Report Version: 104
Exception Type: 00000020
Exception Codes: 0x000000008badf00d
Highlighted Thread: 0
Application Specific Information:
com.accessagility.wifisurvey failed to launch in time
Elapsed total CPU time (seconds): 20.990 (user 20.990, system 0.000), 52% CPU
Elapsed application CPU time (seconds): 19.954, 50% CPU

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I c

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I can do to repair it

Please authorize ADE 3 with same credentials that you used with older version of ADE

Sorry but i dont speak a good english, i have a problem with my ipod the apps Twitter,Facebook not open but messenger(fb) music yes,I can do to make them work?

helpme please,sorry but i dont speak a good english, i have a problem with my ipod the apps Twitter,Facebook not open but messenger(fb) music yes,I can do to make them work?

See:
iOS: Troubleshooting applications purchased from the App Store
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Hai Matt I have a problem with download a new app. While I bought iphone5, I take iphone to shopkeeper for download some app and videos that he used his Apple ID . That's t problem now.. Not all the time his ID is appearing but some times hi

Hai Matt
I have a problem with download a new app. While I bought iphone5, I take iphone to shopkeeper for download some app and videos that he used his Apple ID . That's t problem now.. Not all the time his ID is appearing but some times his Apple ID is appearing that time I can't download app, videos, songs.. So please guide me to remove that ID or how to solve that..
Regards
Babu

Check Settings/iTunes and AppStore/AppleID and make sure that your AppleID is filled in. If not , sign out and sign in with the correct info.
To make sure that no other apps or videos are on your device than the one you bought, set it up as new device, explained here: How to back up your data and set up as a new device
Content that is not bought with your ID can't be used on your phone, that's why his ID and password is asked when you try to use those apps downloaded in the store.

Nano problems with Alarm clocks(lik e Luna or others)

I have a new nano 4gb, and an Xtrememac Luna... My old ipod 2nd gen worked perfecly, the new nano has problems instead.. When my alarm function lit the ipod, it does not play the song, but remain in pause... The nano wakes up, but old nano started to play the song, this stands in pause. Why this? Can I hope in a fix or something? many people have this problem...
Possible solutions?
thanks in advance

Since there was no reply from Apple so far I called their service today.
The claimed that this problem was not known with the devices which they are selling and that they can't tell about 3rd party alarm clocks.
Big news! Who would have thought of that answer?
Well I then called the manufacturer of my alarm clock which is called "auvisio", one of these cheap copies. They knew about the problem with the nano 3G on thier device and said that they can't offer a solution so far. They offered RMA which I would say is quite nice of them but it doesn't help me much with my wake-up-problem in the morning.
I already settled with the thought that I would have to buy the more expensive Apple stuff but as I read above even Bose seems to have the problem. Complete confusion.
Hopefully firmware 1.0.3 will be released soon and can finally solve these problems. Release 1.0.2 definitely was a step into the opposite direction...

Problems with alarm

Hi,
Have had a problem with the alarm on my iPhone since I updated my 3GS to IOS4. The problem is I had about 10 recurring alarms before I updated that have literally multiplied by thousands now. There are so many i cannot even get into the alarm part of the clock app with out it crashing. This is very annoying because so many go off at once that it causes the iPhone to crash because of RAM shortage and this happens every day, a solid hour of my iPhone going crazy between the hours of 7am to 8 am. Worse still when i upgraded to the iPhone 4 the bug came with it!
Would anyone have any idea how to fix this? I keep praying for a patch!
Thanks

Thanks!!! Worked a charm!
I tried restoring before but never as a new phone!
Cheers man!! Much appreciated!

Problem with downloading and installing apps

When I start download or install new apps after few second whole operation slow down or stop. I have same problem when I start update old version of aplications. Can you please help.
I do not have problem with cnnection to internet.

Try this
Make sure IOS is updated to latest version
(How to update your iOS device
http://support.apple.com/kb/HT4623)
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).

Problem with roaming for specific apps

Hi :)
I have a problem with my iPhone 4s:
When i use roaming on my iPhone 4s i try to save some money by turning off roaming for specific apps, but one day for ca. 3 weeks ago it stopped working!
Some apps can use roaming but some can't ;(
There are like 10 apps always turned on, but if i try turning roaming off for an app that is on already it wont work!
If i close settings and reopen it, the app is now denied using roaming!
If i try allowing an app it changes but still wont work and after some time it gets in the same possission i cant change!
I have never experienced this before and i could't find an answer on google ;(
If you know how to fix it please respond to me here :)
~somonekilledme
P.S: Im really sorry if there are bad english here, but im mot english sooooo..... yeah

You are on the right track suspecting DHCP conflicts.
To configure your "roaming network" connect your "slave" Extreme to your main Internet router - either directly or through a switch - and place it in "bridge mode". That will work.
A router will be distributing IP addresses using DHCP. Anything connected to it should be configured as a bridge, the essential difference being that a bridge does not distribute IP addresses.
I do not believe your "slave" Extreme will function connected as it is to the "main" Extreme, but may work if you assign it a static IP address. It is not unusual for it to retain this static IP after having been changed to DHCP if its lease is still valid.
The OK article you referenced must be terribly outdated if it is referring to AirPort Admin Utility. That has not been used in about a decade. Read this one:
Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations
Unfortunately its screenshots refer to AirPort Utility 5.6, which has been replaced with the prettier, though less useful 6.2.

Problem with steps in health app!!

Hello guys, i have problem with my health app, i enable steps in the app but it doesnt count even a single step, it says "No Data". I searched in the Internet the way i can enable steps and did exactly what it says but nothing. Can someone help?

you can use 3rd party apps to monitor your activity, but this will drain you iPhone Battery significantly more than if using the integrated Motion coprocessor.

Problem with rules in mail.app

I've just started having a problem with my rules in mail.app that I just don't understand. I have several rules that I've had working for quite a while now, over a year. All of a sudden beginning about a month ago, some of them -- different ones at different times -- stop working and the incoming mail goes into my main mail box and don't get distributed according to the rules to the appropriate mail boxes.
When I check the rules, all of which are basically the same: If any of the following conditions are met, From contains XXX, Perform the following actions: Move message to mailbox xxx, I see that mailbox XXX has changed from what it should be to some other mailbox name which is a valid name but not the one that I originally put in the rule.
To make it a bit more strange, the rule with the wrong mailbox name is not executed and the mail winds up in my main mailbox.
When I edit the rule and change the mailbox name and am asked whether I want to apply the rule and I respond yes, the rule executed and the mail that landed in the main mailbox gets distributed the way it should.
But then anywhere from a day to a week later the same thing happens, that is, the mailbox name in the rule somehow gets changed again.
Has anyone seen this behavior before and/or have any suggestions for fixing it?

Are you really on 10.8.1 as per your profile - maybe updating to 10.8.3 might help.
Have you tried rebuilding the mailbox? It sometimes helps sort out Mail problems:
http://support.apple.com/kb/PH11811

Problem with checkbox value and app.settings.getSetting()

Hello everyone.
I`ve got a problem with getting saved settings for checkbox.
Saved settings doesn`t apply on checkbox value.
It`s strange, but it always "true".
So here piece of code:
checkMe = 11;    //any value for the first time running
if (app.settings.haveSetting("savea", "chck")) {
                      checkMe = app.settings.getSetting("savea", "chck"); // get saved value, else 11
                      alert("checkMe = "+checkMe)
                    if(checkMe == 11){
                        checkMe= false;   //if there is no saved settings, checkbox value will be false/ unchecked
                        alert("You run this script first time, so manual value will be 'false'")
                        }else{
                            checkMe = app.settings.getSetting("savea", "chck");     // if saved settings exist, get true or false
     alert("Yes, checkMe will = "+checkMe)
win.checkPanel.chkOne.value = checkMe; /// checkbox value will equal saved checkMe
var fff = win.checkPanel.chkOne.value; // string for alert
alert("aha! but checkbox value is = " +fff+ "\n Why so?")     // here we`ve got always "true"
win.checkPanel.chkOne.onClick = function () {
    var path11 = win.checkPanel.chkOne.value; // checkbox value to variable
    app.settings.saveSetting("savea", "chck", path11); //saving checkbox value
    alert("Saved this value - " + app.settings.getSetting("savea", "chck"))
win.checkPanel.chkOne.value is always true.
Can someone exmplain why and how to get rid of this static value?
P.S. just in case, here is full code:
function mainFun()
    this.windowRef = null;
mainFun.prototype.run = function()
    /*----- UI -----*/
          var retval = true;
          var win = new Window("palette", "Check option", [150, 150, 460, 455]);
          this.windowRef = win;
          win.checkPanel = win.add("panel", [25, 150, 285, 265], "Checkbox");
          win.checkPanel.chkOne = win.checkPanel.add("checkbox", [10, 15, 125, 35], "Checkbox One");
          //win.checkPanel.chkTxtOne = win.checkPanel.add('edittext', [140, 15, 230, 35], '');
     win.quitBtn = win.add("button", [110,275,200,295], "Close");
checkMe = 11;    //any value for the first time running
if (app.settings.haveSetting("savea", "chck")) {
                      checkMe = app.settings.getSetting("savea", "chck"); // get saved value, else 11
                      alert("checkMe = "+checkMe)
                    if(checkMe == 11){
                        checkMe= false;   //if there is no saved settings, checkbox value will be false/ unchecked
                        alert("You run this script first time, so manual value will be 'false'")
                        }else{
                            checkMe = app.settings.getSetting("savea", "chck");     // if saved settings exist, get true or false
     alert("Yes, checkMe will = "+checkMe)
win.checkPanel.chkOne.value = checkMe; /// checkbox value will equal saved checkMe
var fff = win.checkPanel.chkOne.value; // string for alert
alert("aha! but checkbox value is = " +fff+ "\n Why so?")     // here we`ve got always "true"
win.checkPanel.chkOne.onClick = function () {
    var path11 = win.checkPanel.chkOne.value; // checkbox value to variable
    app.settings.saveSetting("savea", "chck", path11); //saving checkbox value
    alert("Saved this value - " + app.settings.getSetting("savea", "chck"))
          win.quitBtn.onClick = function() {
              win.close();
    win.center();
          win.show();
          return retval;
if(typeof(mainFun_unitTest) == "undefined") {
    new mainFun().run();

Played around with different values, combinations...
Doesn`t work too:
checkMe = 111;    //any value for the first time running
if (app.settings.haveSetting("333", "check")) {
                      checkMe = app.settings.getSetting("333", "check");
alert(checkMe);
                if(checkMe == 111){
                         win.checkPanel.chkOne.value= false;
                        }else{
                            if (checkMe != false){
                            win.checkPanel.chkOne.value= true;
                            }else{
                            win.checkPanel.chkOne.value= false;
win.checkPanel.chkOne.onClick = function () {
    var path11 = win.checkPanel.chkOne.value;
    var path12 = path11.toString();
    app.settings.saveSetting("333", "check", path12);
    alert("Saved value - " + app.settings.getSetting("333", "check"))

Problem with alarms in clock app

Similar Messages

Maybe you are looking for