Problem with align element.

Hi everybody,
i have a problem with align element on my page. I explain:
i have used into a panel page a panel group to align my element horizontal, but when i set the vertical-align on top, the element are align in middle.
Now is......
text text text text text text
text text text text text text
text text text text text text
text text text text text text tablelayout
text text text text text text
text text text text text text
text text text text text text
But i wont........
text text text text text text tablelayout
text text text text text text
text text text text text text
text text text text text text
text text text text text text
text text text text text text
text text text text text text
Thanks.

Have you tried using a panelHorizontal instead of a panelGroup?
The components are automatically laid out horizontally and it has a Valign property that you can set to top.

Similar Messages

  • Problem with installing Elements - from noob

    I have problems with installing Elements, it gives my an unknown mistake - I already have CS4 up and running, could this be the case?

    Chances are not very good that pse 4 will run on os x 10 6.8 unless you were upgrading from an earlier mac version that already had pse 4 installed.
    as per this:
    http://forums.adobe.com/message/4474236#4474236

  • Problem with Photoshop Elements Printing

    I have been using Photoshop Elements for a couple of years now and know it pretty well.  Today while attempting to print, a strange problem came up:  After going through the protocol to make a print, just before the image prints PE does a very fast auto correction that basically ruins all the color correction I have made on the image.  How do I disable this function?

    Hi and thanks for your reply. I checked the settings under "Print", "More Options", then "Color Management" and it only has "Print Space", none of the three options that you said I should have.  Am I looking in the wrong place?
    Date: Mon, 3 Sep 2012 11:14:57 -0600
    From: [email protected]
    To: [email protected]
    Subject: Problem with Photoshop Elements Printing
        Re: Problem with Photoshop Elements Printing
        created by 99jon in Photoshop Elements - View the full discussion
      Check your color management by clicking More Options in the print dialog There are basically three options:1) Printer Manages Color2) Elements Manages color3) No color Management Make sure everything is consistent e.g. if you choose Elements manages color make sure color management is switched off in the print driver. 
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4669848#4669848
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4669848#4669848. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Y have problems with Photoshop Elements 12  Bug after reinstallation complet  Impossible working ??

    Morning !
    We have many problems with PHOTOSHOP ELEMENTS 12 ?
    After installation on MAC OS X   YOSEMITE  .
    S O S !!

    Exporter vers photoshop do you receive any specific error messages?  In what way is Photoshop Elements 12 not working?

  • Problems with Photoshop Elements 11

    I have a problem with Photoshop Elements 11, which i bought last week. Installing was completed according the instructions. When I started to use the program my one year old HP-computer with Windows 8.1 informed that there a failure in the Photoshop program and the did not open.

    attach a screenshot of the error message.

  • Problem with premiere elements 4.0

    i am having
    problem
    with premiere elements 4.0. it keeps on crashing and when i put pictures on the timeline it comes up black. when i try to preview it either it shows black or sometimes the picture but i cant see it to delete if i wanted to. also it gave me a message something like that adbe is running low on memory and i should be caution

    This is aimed at Premiere Pro, but may help
    Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

  • JDeveloper Extension Problem with Navigator Elements

    Hi,
    I have a problem with the elements of the JDev Navigator.
    At IDE startup I want to set an overlay for the elements on the active project.
    This function is implemented in the Subversion Extension too.
    How can I access the elements of an active project in the navigator?
    It is not a problem to set an overlay with the ContextMenuListener.
    Thank you for your help.
    Greetings,
    Benjamin Oelenberg

    Please take a look at the Extension SDK sample projects. There is a sample that does exactly this.
    Install the Extension SDK from the Help --> Check for Updates dialog and after restart, say yes to installing the sample projects.

  • I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11:  the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, howev

    I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11:  the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, however the arrows will move it OK.  Also I cannot drag the selection to another photo in the photo bin as before.

    Hi,
    Please refer: http://helpx.adobe.com/photoshop-elements/kb/pse-stops-responding-yosemite.html
    Thanks,
    Anwesha

  • Problems with ps elements 10 on imac

    hi,
    i just downloaded the programm yesterday from the app store onto my imac. i want to use it as an extention to my aperture 3.
    I have the following questions/problems:
    + starting the programm takes at least 2 minutes, is this normal? I use an Imac Quadcore I7 with 12 gb onboard
    + the preferences: i can only extend the used memory up to 3gb, although i have 12 gb on board?
    + I can not store the preferences, when I shut the programm down, it tells me I do not have the legitimation to store the preferences?!
    + panorama foto work is mostly running out of memory?! 12gb on board
    Please can anybody help me?
    Thanks
    mikle

    No, it does not work on the other account. Problem is still/again the same. In the new account it works perfekt.
    Von meinem iPad gesendet
    Am 08.01.2012 um 22:16 schrieb "Barbara B." <[email protected]>:
    Re: problems with ps elements 10 on imac
    created by Barbara B. in Photoshop Elements - View the full discussion
    If it works in the new account it should hopefully work in your other account, so just log out of that one and go back to the old one and see if it does.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4125222#4125222
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4125222#4125222. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • [svn] 3216: Fix for MXMLG-228, a visibility problem with graphic elements.

    Revision: 3216
    Author: [email protected]
    Date: 2008-09-15 18:13:11 -0700 (Mon, 15 Sep 2008)
    Log Message:
    Fix for MXMLG-228, a visibility problem with graphic elements. This is a quick fix that may force extra display objects when toggling visibility. We should investigate alternate solutions if performance is a problem.
    Bugs: MXMLG-228
    Reviewer: Deepa
    QA: Please check for performance problems when toggling visibility of a large number of graphic elements.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/MXMLG-228
    http://bugs.adobe.com/jira/browse/MXMLG-228
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/GraphicElement .as

    Hello Antonio;
    After many, many test I discovered that the problem, at least in my case it is caused by the new ACR 4.5. Please read the Thread that I post under Camera Raw. I include the link below.
    I also open two Bug Reports about this, but as usual Adobe (and other Software Companies) will never take responsability for this, until one day they release a new version with "enhancements".
    PSE6 Organizer Crash with ACR 4.5 (Vista Only?)
    http://www.adobeforums.com/webx/.3bb6a869.59b60d3e

  • Problem with align and Selection Tool.

    This is a weird problem which I cannot explain at all.
    I am using AI CS3 with Windows XP.
    I am having this completely random problem with the selection tool and align pallette I cannot explain.
    I have a group of objects and groups of objects I am trying to use the align pallette on.
    Sometimes when I select all of the items I want to align, either by shift-clicking each one, or by drag-selecting them I am getting a random behavior where sometimes the align button will move all of the objects COMPLETELY off of the artboard, all the way to the edge of the working area and beyond into the grey area you cannot see.
    Normally, this would be caused by a stray point somewhere way off-screen or some other cleanup oriented thing on my part. However in this case, the behavior is random and does not happen every time I hit the align button.
    Sometimes it takes items within my grouped objects (lines of text) and moves THEM completely off the work area, leaving the other items in the groups in place. Sometimes the bounding box when I drag-select the items will stretch extremely far off of the work area.
    I have even dragged the extra large bounding box, bringing the edge that was once way off screen onto the work area, in outline view, in hopes of finding the stray point or object that could be causing this. However NOTHING appears that can be causing the align to throw all of my objects off-screen.
    The random nature of this behavior and the way it sometimes affects my text objects inside of groups leads me to believe it is a program bug and nothing I am doing.
    The behavior takes place regardless if I select by dragging or by shift-clicking, and is happening in more than one file, also randomly.
    Also, choosing "align to art board" vs. "align to crop area" does nothing to change this behavior.
    It is quite irritating. I've been using illustrator since v.88 so I have enough experience to know this is not normal.
    Any help with this one would be greatly appreciated.

    When this behaviour occurs, are perhaps guides included in your selection?

  • I have elements 11 and I did the 30 day trial of elements 12. When the trial expired it caused problems with my elements 11. Nothing opens correctly, some not at all and I can't get help?

    Please help me. I am so disappointed in Adobe. I was planning on upgrading to 12 after the trial period but was unsure still. The problem I am having now is that my PSE 11 Organizer is off the grid. When I right click on a file and go to "open With", it only offers me the option to use Premiere Elements and not Photoshop. I found the .exe@ file for Photoshop Elements 11 and created a shortcut to my task bar in order to get to it. That won't work on my organizer though. Should I just uninstall and reinstall the whole thing? I'm on Windows 8.1. I refuse to upgrade to 12 after being refused any support considering it was the trial they encouraged me to try that caused my problem.If I have to reinstall everything with it impact the projects I've created?

    wesb
    What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
    Let us go through the typical drill so as to take nothing for granted.
    1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
    school or company network?
    2. Are you running the program as Administrator and is there any "domain" account involved?
    3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
    4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
    Let us start by ruling in or out any of the above, and then we can decide what next.
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • Problems with Premier Elements 7 Opening Earlier Projects

    I have used Premier Elements 3 to create many 15-60 minute videos, most built from Photoshop Elements slide shows imported into Premier, and most with DVD output designed. After installing Version 7, I attempted to open these projects which it is supposed to do. A minority will open fine. The balance either cause the error "The project cannot be loaded - it may be damaged or contain outdated elements".
    Does anyone else have these types of problems? I have tried all of the various methods outlined in the KB, like deleting preferences, etc., removing and re-installing, booting with nothing else loaded, etc. Nothing has any impact. I have talked to Adobe support and they are clueless and just walk me through the usual install/uninstall, etc. can anyone help? I have an enormous investment in time in these 3.0 videos and I bought Version 7 to upgrade and now it does not work! Thanks.

    Just a thought....
    How are you opening the Premiere Elements 3 project in Premiere Elements 7?
    According to the Adobe party line Premiere Elements 7 PDF, you can open projects created in earlier versions of Premiere Elements in Premiere Elements 7, but you cannot open projects created in Premiere Elements 7 in earlier versions.
    Do you have Premiere Elements 3 and 7 on the same computer at this time?
    The Adobe suggestions is, if problems in this regard and instead of right clicking the project file in its saved location, then:
    1. open the project from with Premiere Elements 7
    or
    2. right click the project file in its saved location and name Premiere Elements 7 as the Open With program
    Check it out to see if I have interpreted this info correctly
    http://help.adobe.com/en_US/PremiereElements/7.0/WSB51FF526-3E14-430c-B388-FD0B747547E9.ht ml

  • Performance Problems with UI Element Tabstrip and IE

    Hi,
    I use the UI Element "Tabstrip" in a Java Web Dynpro Application. The application gets slower the more I jump from one tab to the next. All the other UI Elements (e.g. ComboBox, TextField) are affected, too.
    A system trace on the Web AS seems to indicate that it is a client problem.
    We are using the Internet Explorer 6.0.2900.2180 XP SP2 and the J2EE Engine 6.40.
    It seems to be a problem with the Tabstrip element in combination with the IE (Firefox 3 works fine). We created a test application with only the tabstrip element, three tabs, and a combo box. After several clicks on the tabs, the test application gets slower...
    Does anyone has had the same problem with the tabstrips, or anyone an idea what might be the reason??
    Thanks,
    Sabine

    Open an OSS message (BC-WD-UR).
    Armin

  • User Account Control Problems with Premier Elements 7 32 bit in 64 Bit Windows 7

    I found User Account Control Problems in other forums but didn't see much in Premiere Elements, so I hope this helps others who may be having problems with 32 bit programs in a 64 bit computor. When I first got my 64 bit I didn't have problems.
    Back in February I bought a Quad Core Desktop with Windows 7 64 bit. Haven't been on the forum for 7 months since I wrote in regarding importing video with the Pyro AV Link (Premiere Elements Tips and Tricks). I was having problems importing video which started after March 28 sometime, as that was the last time I didn't have a problem importing VHS. Took me a few months off and on to find out what worked.
    I started uninstalling Windows updates and any programs I had installed back to that point in time. Checked after uninstalling each item. The capture screen would come up on a delayed basis but clicking on capture did nothing. Although no driver is required for IE1394 (so they say) I read where some people using the Legacy driver had fixed some problems, so I switched to the Legacy. Seemed to work great (for a few minutes).
    I had even uninstalled and reinstalled PE7 but no difference. Finally I noticed a shield in the PE7 Desktop icon. Thats weird. Never had that before. Just decided to show up after I had done all of the stuff I mentioned. Turns out at some point in time since I've had the computor Windows 7 decided to flag my 32 bit program as misusing the 64 bit system. User Account Control. I never bothered too much with UAC and just clicked on the yes box wen it popped up asking if I wanted this or that to take control of my computor. I tried using the minimum setting for safety reasons, and then finally turned User Account Control off. Bingo! PE7 capture works again and still working.
    While I am not recommending that people arbitrarily turn UAC off, this appeared to be my problem. I would recommed that they try turning it off before uninstallin a bunch of stuff. Having a restore point may or may not have been a fix for me. I think one of the Windows Updates caused the problem but I am not going to uninstall any more stuff at this point, I have not been back on the internet or installed any more updates in my desktop. I am going to use my laptop for internet and used the desktop for video.
    I am guessing this could be a problem for any 64 bit systems trying to use 32 bit programs. IE: XP,Vista,Windows 7 64 bit. In Vista there is also Data Execution Prevention (DEP) which you can turn on or off, supposedly to prevent misuse of memory (as I understand it), but Win7 either doesn't have it or I haven't found where it's located.
    Maybe this has been covered in the forum somewhere and I missed reading it. Hope I am not too confusing. Anyway, whatever feedback you guys have would be great.  

    John,
        Thanks for your answer, and I did check out the link you suggested. However, I have Windows 7 Home Premium as most people have I think, and the XP program was not available. I started with Vista and now have Win 7. I never could navigate around in XP anyway so am content to just leave User Account Control off.
        Interesting side note to turning UAC off is that my desktop seemed to be using more of the CPUs, where half of them were "Parked" as I wrote in also about 7 months ago when I 1st got my desktop. I am pleased to say that video processing seems to go quicker with UAC off. Have to observe things some more to confirm.
        I just thought if others were having problems after installing Windows Updates and leaving UAC off worked then they could possibly pinpoint a problem.

Maybe you are looking for

  • How do I get around restoring iCloud on a new iPhone with an older iOS than my previous iPhone?

    My current iPhone 4 has iOS 7.1.2, and my new iPhone 5 I'm trying to set up iCloud for only has 6.1.4. So it won't accept any of my iCloud backups on thr iPhone 4. Is there any way to get around this? Do I need to just set it up as a new phone and th

  • ITunes 11.1.3.8 and iOS 7 is there a problem synching?

    I have heard there is so am reluctant to update to either as I connect my iPhone 4S to iTunes on my computer to update due to the wifi problems I have with the 4s since updating to iOS6?

  • Mac Mini slow after 10.4.8?

    HI, I've had a Mac Mini since June 2005, and have performed regular maintenance (running cron scripts, repairing permissions, repairing hard disk etc) I also use Yasu once in a while. However in the recent past, especially after the 10.4.8 update, it

  • OBIEE 11G - problem with calculating percentage

    Hi, I have a problem with calculating a percentage.... I have a 2 measures Success and Failure where Success is a count(Response_key) Failure is a count(failure_key) I want Success/(Success+Failure) * 100 I am getting this value as a 0 Infact any col

  • Vectors - Saving Reference to a Class and calling it's Methods ?

    Hi, How can I do this ? trying to execute a method from a class reference stored in a Vector.... something like this... Vector v = new Vector(); v.addElement( new MyJPanel1()); v.addElement( new MyJPanel2()); for (int i=0; i<v.size();i++) { // How ca