Problem with Alpine CDA-9884

Help! My wife has an Alpine CDA-9884 with the full speed cable Ipod cable and a 80GB Classic. Just recently, the search function stopped working. Especially when "ALL" is selected, then everything freezes, the Ipod stops playing and the Alpine shows an ERROR 01. I tried my own 80GB classic in her car stereo, and it works fine. I already tried the 5 Rs, I reset the Head Unit. Only thing I think is left is sending it in for warranty service. I think maybe something happened to the dock connector on the Ipod? Any ideas?
Thanx,
Rudy

Hi Rudy, did you manage to solve this porblem. I have the same thing happening, but it's happened all of a sudden. I've had the new car stereo for over a year and it works fine, then the other day I loaded some new music onto the ipod and created a new playlist and ever since then it plays for about 40 minutes then I get the error-01 message. I've tried resetting the ipod but nothing works. If you have the answer I'd apprecaite your help, thanks.
Victoria

Similar Messages

Alpine CDA-9884 car stereo won't charge iPhone 4. Worked fine with 1st gen

Why can I not charge my iPhone 4 from my car stereo as I have done for the past couple of years with my 1st gen iPhone?
Does the new battery charge differently?

It's the iOS4.0 that is messing it up, I have a 3GS and work at a Car Audio Shop and 100% of every model of every manufacturer does not work with the OS4. Some of these radio were just release less then a month ago built specificaly for iPhones, and after the update to OS4 they no longer function. Same Phone, same radio, different OS different results. Sonys will just sit there frozen with Ipod displayed on the screen. Pioneer Radios will display searching then after a few mins give Error-19. Kenwoods flash Searching.... forever. Alpines display Device Error, the alpine thats made for iphone and pandora never recognize the phone or ipod even if you have the pandora alpine link app running. JVC displays Searching forever. So your going to have to wait 6 months or more before you can get a new radio that can work with the OS4 and iPhone 4. If you have an older iPhone and want to keep your radios working with them, just dont allow the upgrade. Hopefully apple can patch whatever is blocking the comunication ports these radios use, or put the old code they removed back in so they become backwards compatible, but I wouldn't bet on it, if they break your stuff and do nuthing about it you have to buy more stuff, which makes them more money. Just a Heads Up. Was hoping to come here and see some hadn't had the same problems but looks like theres alot of issues with OS4 tbh.

My iPod doesn't work with car audio (Alpine CDA 101E)

From the manual, my Alpine head unit supports iPod nano 3rd Gen (*version 1.1*).
My iPod is nano 3rd Gen but *ver 1.1.3 PC*
Please give me some suggestion to solve this problem.
Alpine CDA 101E is the product of 2008 or 2009. This iPod is 2007 product.
I think it should work together, right?
I've try another iPod with very old Generation to my Alpine, it worked!
Thank you in advance

I had the same problem when trying to dock with a Volkswagen Jetta wagon and its factory iPod dock cable.
Same problem trying both Kenwood and Pioneer dock cables in an auto-sound store.
Why would Apple mess with the multipin connector? What's the solution?

Any ideas on problem with ipod and alpine cde-9881 car stereo

I have an ipod 60gb v 1.2.1 and a new Alpine car stereo with Ipod connecting cable. When connected, the stereo message reads IPod searching. It never assumes control of ipod,or quits searching. I have reset and restored my ipod, had the apple geek at genius bar check it out. My ipod does not play on the alpine ipod ready stereo in my husband's car, nor the stereos in Car Toys. My husband's 30 gb ipod plays on the stereo in his car AND my car. Help! Anyone have any ideas on how to fix this problem? Alpine is telling me it could be a software problem with my ipod, and to revert to an earlier version of itunes. But my husband's ipod works in my car. So I did a restore using his computer and itunes....no luck. am interested in any ideas on a possible solution!!
Thanks in advance
md

Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore
Towards the end it says "If after restoring your iPod, the message described above reappears, the iPod drive letter may need to be reassigned. See the "Change the Drive Letter" section of this document for steps to assign a different drive letter" which contains a link to this article: Windows confuses iPod with network drive and iTunes may exhibit strange behavior in relation to the iPod.

Alpine CDE-103Bt Head Unit and Problem with 160 Gig Ipod Classic

Hi,
2 weeks agao I brought a new Alpine CDE-103BT Head unit for my car. I have owned one of the old 160 gig classics for the last year and a half and at the time I brough the unit I was told this should all work sweet. Indeed all of the documentation from Alpine, and the Sales person, said this would not be a problem.
Unfortunately from Day one, most times after I received a phone call, while playing my ipod, the Head Unit would givesme an "Error-03" message and stop playing my music. I would then have to unplug my ipod, reset it, and plug it back in. Extremely frustrating.
The people I brought the Head Unit from are trying to say its an Ipod problem, yet I never had any problems with it and after I contacted the Australian Ipod help line they said it all appears to be working correctly. The firmware version I was on when I first tried the ipod on the head unit was 1.1.2. The Alpine manual said it should be 1.1.1 (then again you would expect them to be able to cope with updates) so as a last ditch attempt I downgraded the firmware on my ipod to 1.1.1, but it did not make a difference.
The only other thing I have noticed is that I switch the repeat and shuffle settings off when I plug in the unit, but after I unplug it after an Error-03 the Repaet function has been swtiched to all - I am not sure if this is what is causing the problem.
I am getting pretty frustrated with everything and I was wondering if anyone else has come accross this issue and even me helpful had they found a way to fix it.
If not has anyone had any postive expereinces with Alpine head units?
Thanks

Hi,
2 weeks agao I brought a new Alpine CDE-103BT Head unit for my car. I have owned one of the old 160 gig classics for the last year and a half and at the time I brough the unit I was told this should all work sweet. Indeed all of the documentation from Alpine, and the Sales person, said this would not be a problem.
Unfortunately from Day one, most times after I received a phone call, while playing my ipod, the Head Unit would givesme an "Error-03" message and stop playing my music. I would then have to unplug my ipod, reset it, and plug it back in. Extremely frustrating.
The people I brought the Head Unit from are trying to say its an Ipod problem, yet I never had any problems with it and after I contacted the Australian Ipod help line they said it all appears to be working correctly. The firmware version I was on when I first tried the ipod on the head unit was 1.1.2. The Alpine manual said it should be 1.1.1 (then again you would expect them to be able to cope with updates) so as a last ditch attempt I downgraded the firmware on my ipod to 1.1.1, but it did not make a difference.
The only other thing I have noticed is that I switch the repeat and shuffle settings off when I plug in the unit, but after I unplug it after an Error-03 the Repaet function has been swtiched to all - I am not sure if this is what is causing the problem.
I am getting pretty frustrated with everything and I was wondering if anyone else has come accross this issue and even me helpful had they found a way to fix it.
If not has anyone had any postive expereinces with Alpine head units?
Thanks

Ipod Classic not recognized by Alpine CDA 117

I hope someone can help me out here . A newly installed Alpine CDA117 ( by Best Buy) today . It will not recognize or play my 7 month old Ipod Classic 120gb.
I does recognize my wife's ipod mini without a problem.
Any thoughts ?
Any help would be greatly appreciated.
thank you ,
Mike

I went to the Alpine CDA 117 website and saw that under the specs they listed that it is compatible with iPod Classic 1g and 2g. Not sure where your iPod Classic 120GB falls as I could not match Apple's terminology with Alpine's.
One other thing that comes to mind is whether your iPod Classic and iPod Mini are formatted in the same way (Either FAT32 (Windows) which can be read by Windows and Mac OR Mac HFS which can only be read by a Mac). The reason I mention this is because I wonder if the Alpine has a restriction toward one or the other.
Axel F.

Iphone 4s bluetooth volume problems through Alpine HU

Having trawled through numerous reports of bluetooth problems with the 4S I have not found one which replicates my issue although I could have missed it.
Essentially I think my query boils down to " Does the 3GS output music, via bluetooth at a higher level than the 4S, assuming both using IOS5.0.1" .Because my new iphone 4S is much much quieter than my old 3gs and I want to establish whether this is a software problem or a faulty unit.
For the last couple of years I have been using a 3GS which paired perfectly with my Alpine CDA-9887/Bt400 stereo in the car, handled calls well and when playing music via the bluetooth input ( which it did exceptionally well) it was at the same sound level as the other inputs for a given vol setting, i.e. I could switch from radio, to disc to bluetooth withouth changing the volume.
Having just changed to an iphone 4S I have found that although the unit pairs ok and seems to handle calls well enough (although rather mushy sounding compared to 3GS) it is very quiet when using the ipod function via bluetooth.
Volume and sound quality are very subjective I realise but to give an indication of the problem, the Alpine head unit has a volume scale from 0-39. On all inputs (except with the 4S) a volume of 5 is fine for spoken voice, 12 good for music on the move 21 is very very loud pushing the cars speakers to the limit. These levels are approx the same when playing music through an iphone 3GS and an ipod touch via bluetooth.
By contrast the iphone 4S is inaudible at vol 5, needs 20 to be listenable to on the move and even at vol 39 sounds thin and about as load as a 3GS at vol18 so ful vol not possible from my iphone 4S
The main problem with this is that if you are listening to music from the iphone 4S then switch to the radio without remembering to drastically reduce volume it is likely to result in damage to the speakers and/or your eardrums. The problem is compounded as I use the TomTom app regularly and this exibits the same problem, the volume needs to be very high for instructions and then if I change input to listen to the news....ouch.
I have tried 2 iphone 3GS's and an ipod touch on this Alpine unit and they all work perfectly, being able to maintain the same output for a given HU vol level as the radio etc. I have tried increasing the bluetooth volume on the 4S handset, have tried clean restore to see if there is some obscure problem with my backup all to no avail.
Has anyone upgraded from a 3GS to a 4S and found the music level in a car via bluetooth much quieter, the same or louder and does this sound like a hardware problem.
thanks.

Funny Apple told me to eat **** and call my car place.
HELP !!!
It’s not like we are working with Samsun here. They should have thought it out fixed all the bugs then went ahead. I am...... ******! My 3 week old Volkswagen Tiguan no longer plays my MUSIC nor my Audible. Its so not ok. This is a breach of contract. I am told by apple you don’t have to update but my carrier said just the opposite our phones will not work without the updates...
Apple get you crap together, I had such respect you. You have let a lot of apple fans down.
A very ****** ex Apple Fan

IPhone 3G works with Alpine iDA-X200 car stereo

I just wanted to drop a quick note letting folks know that my iPhone 3G works flawlessly with my new Alpine iDA-X200 car stereo. Charging and playing music from the iPhone's iPod work well. As an added bonus I can also play Pandora music through my car speakers with the system. I do get the "This is not a supported accessory do you want to enable Airplane mode?" question but I answer "No" and haven't had a problem.
In case anyone is in the market for a new car stereo to work with their iPhone 3g I recommend the Alpine iDA-X100 or X200 head units.

So I went to the store where I bought my Alpine iDA-X200 and explained what was going on. They seemed to think that is was a problem with all X200s and not just the unit I got - they've had a number of problems with stereos hooked up to iPods and even more so with iPhones.
Well, after playing my iPhone 3G on a demo iDA-X200 for 18 minutes it began to drop out the audio. They were going to call Alpine in the morning and see if they had any advice but before that I plugged in my iPhone 3G into their demo iDA-X100 and let it play. After 35 minutes on the X100 it hadn't missed a beat so I paid the difference and swapped out for the X100. So far I'm pleased but we'll see how things go over the next couple of days - I and hopeful but have my fingers crossed.

IPod 80gb and Alpine CDA-9883 Car Stereo

I just installed an Alpine CDA-9883 stereo with a direct connect to an iPod. I plug in my 80gb and the stereo simply says, "Searching," and never changes. My wife's 4gb nano worked perfectly with it. I have read about going back to previous versions of the iPod software by restoring the factory settings. This did not work as my iPod came with version 1.2.1. I am pretty frustrated and do not know what to do, any suggestions?

I have tried reseting the iPod while it was connected to the Alpine. I contacted Alpine today and the customer service person said most of the 80 gb iPods have not been working. Their software/firmware simply does not work with these decks. He basically said my iPod will not work with the deck and I might contact Apple in hopes they will update the software to make it compatible. It is really frustrating since the stereo and the box have ipod compatible all over it. Thanks for your help and let me know if anyone has heard anything else or something from Apple.

This is a continuation of my earlier question. The CDs are burning with a .cda or .cdda format I read the articles suggested, but I don't yet have an answer. The files I am trying to burn are not protected. They are personal recordings.

The CDs are in a .cda format. I am starting with .AAC or mp3. I have no player that can handle a .cda or .cdda format. This relates to my earlier question. I could not see how to add to that. I am using Vista 32 bit. I never had a problem with this before. I tried re-downloading itunes. I can burn a CD with Power2Go 8 and RealPlayer. I have not tried others.

There is no "cda format" - this is just how Windows Explorer shows the tracks on an audio CD that can be played on any CD player. When you use iTunes to burn a playlist to an audio disc, it creates a standard "Red Book" disc, converting the format of the files within the iTunes library to 16/44.1 audio (albeit without recovering any of diminished quality of mp3 or aac data). If you want to create a CD that contains the files from iTunes, in the format in which they exist in the library, you should use the MP3 CD or Data CD selection from the iTunes Burn Settings dialog.

Problems with PXI after motherboard replacement

Hello,
My PXI system consists
of PXI-1045, PXI-8360 and five NI
PXI intruments (5152, 4065, 6552, 2532, 5404). I was working with this
system without problems for a long time. However, the motherboard of my
PC had a specific problem with the ethernet connenction and I decided to
replace the motherboard with a new one (same model). After the
replacement (the pc finally was fully functional), I tried to power on
the PXI chassis, but I couldn't "see" any module in PXI chassism, using
the MAX. I must tell thatI didn't change the hard disk of the
pc, or anything else just the motherboard.After some experiments, I
finally fix the probrem with the following solution: First I unplugged
all the modules from PXI chassis. After that, I plugged one module and I
reboot the pc. After that I plugged the second one module and I reboot
the pc. And so on...
This was the only solution
that I found in order to indentify all the modules of the PXI chassis.
My question is why happend this
thing? Where are the PXI modules' adresses stored? Also, is the
procedure I used correct, or I had to do something else in order to make
the system work?

Hello,
Im glad that your system is up and running, ideally that behavior should not have occured. For future troubleshooting, also check Windows Device Manager to see if your devices show up if MAX does not detect them (Windows may have initially failed to detect the hardware). In a PXI system, the pxisys.ini file provides mappings from PCI logical addresses (PCI bus, device, and function numbers) to corresponding PXI slot numbers, allowing device driver software to identify the slot of a PXI module. There is a unique pxisys.ini file for every combination of PXI chassis and controller. See the link provided below for additional information regarding how to configure PXI systems in MAX.
1. Configuring Your PXI System in MAX 3.x and Above: http://zone.ni.com/devzone/cda/tut/p/id/11136
Best regards,
Ali M
Applications Engineer
National Instruments

TPC 2012 - Problems with shared variable

Hi,
I tried to program simmilar thing to this one http://zone.ni.com/devzone/cda/tut/p/id/5548 on TPC 2012. But it doesn't work.I can see that both programs on my laptop and TPC are working(I've added an additional counter with display), but I cannot see any effect on TPC when I change the value of shared variable on my laptop. I use LabView 8.6 with Touch Panel Module. My question is what are the exact steps to run such application on TPC2012? Are they the same as for TPC 2006?
I've noticed following issues:
1.I cannot deploy the program from Project Manager(there is an information that maybe TPC Service is not started. - I've found such information about TPC Service http://digital.ni.com/public.nsf/allkb/DE177828D27A14A48625734E00768B66 but in fact I cannot find Start » All Programs»National Instruments » NI TPC Service » NI TPC Service Manager 1.0 Does it mean, that the TPC Service is not installed and the programm with shared varibles won't be working or can I start it somehow in another way? Do I need to have TPC service installed on TPC2012?
Until now, I've built the project and sent it through FTP to TPC(the folder was /TEMP) and then started it.
2.Ping works OK
Thank you in advance for any hints how to solve this problem.
Martin

Well no problem, but I'm frustrated with this issue... I've tested many things and nothing. Just to help someone else as I in the future, these are my sources:
http://forums.ni.com/t5/LabVIEW/TPC-2012-Problems-with-shared-variable/m-p/1009631/highlight/false#M...
http://digital.ni.com/public.nsf/allkb/28536DE7E2D9E98B8625770B00738920?OpenDocument
http://zone.ni.com/reference/en-XX/help/372507B-01/lvtpcgsm/tpc_install_sharvar/
http://zone.ni.com/reference/en-XX/help/372507C-01/lvtpcgsm/tpc_install_sharvar/
http://digital.ni.com/public.nsf/allkb/23532363F4905EC28625727A00730B80?OpenDocument
http://forums.ni.com/t5/FieldPoint-Family/TPC-2006-Not-Listed-in-Targets-and-Devices/td-p/566325
http://forums.ni.com/t5/LabVIEW/MAX-can-t-detect-TPC-2106T/td-p/831524
http://zone.ni.com/devzone/cda/tut/p/id/5868
http://digital.ni.com/public.nsf/websearch/28B748B9697B79E18625725A00009066?OpenDocument
http://digital.ni.com/public.nsf/websearch/D1726990DCEB82E4862570F20069C57D?OpenDocument
http://digital.ni.com/public.nsf/allkb/3B469103BBDD4CE48625726000665B36
I hope find some hint..
Fabian León
Certified LabVIEW Associate Developer

Working iPod 5th Gen with Alpine Car Stereo CMA9855

Hi
Just wondering whether anyone has tried using the latest iPod with Alpine Car Stereo CMA 9855 with an iPod interface.
Problem - not all artists show up on the stereo screen + can't get quick search to work. Is it an alpine stereo software problem?
Appreciate any feedback.
Dom

I have a Clarion Pro Audio deck/Clarion IPOD connector. My system worked great up until IPOD SW 1.2.
Before, I could control the IPOD on the face of the IPOD. Now, the IPOD works, but it's in locked mode, so I can't browse artists/albums any more. Baiscally, I have to hit RANDOM TRACK mode, and hope I land on a CD I'm in the mood for.
Very frustrating, although GAPLESS is great. (FINALLY!!!!)

Iphone and Alpine CDA-9857

i have a Alpine CDA-9857 from about 2 years ago and i am wondering will the iphone work with this head unit using the ipod cable that came with it?

I can't speak for that particular model, but I have a CDA-7894 I bought almost 7 years ago that works with my iPhone. About 2 years ago I bought an adapter from mp3yourcar.com specifically for Alpine and my 5G iPod. When I got my iPhone, I plugged it in, and it worked. I get the "This device is not approved..." notice, but I dismiss it and it works. My wife has a newer Alpine (can't remember the model) with iPod capability built-in, so we bought Alpine's adapter cable, and her iPhone works great, too.

PCI 5105 problems with memory

Hi,
I have a PCI 5105, and I have problems with it.
I want get data with 60MS/s and 30M record lenght, but I got only 60MS/s and 20M record lenght. More than 20M record lenght, appear a error "Full Memory".
My computer it's good, and the PCI 5105 can get 30M record lenght.
Is trere a solution?
Thanks.
Sory my English.
Marcela.

Olá Marcela,
Para evitar esse problema de memória cheia, você pode tentar usar a arquitetura produtor consumidor do exemplo abaixo para otimizar a tranferêcia de dados entre a sua placa PCI 5105 e o seu computador. Com isso voce pode extrair o máximo de dados da usa placa e armazenar na memóra do seu PC até que os dados sejam gravados em disco.
NI-SCOPE Stream to Disk Using Win32 File IO
http://zone.ni.com/devzone/cda/epd/p/id/5273
Espero ter ajudado,
Atenciosamente,
Osvaldo Santos

Problem with Alpine CDA-9884

Similar Messages

Maybe you are looking for