Problem with Alt Text output from thumbnail image of Lightbox widget

I’m having a problem with the Lightbox widget not producing alternative text based on the image properties.  I’ve set ALT text for the image properties on both the larger Ligtbox image as well as the thumbnail.  But the HTML output from Muse does not include the ALT text on the thumbnail version of the image.  Here’s an example:
    <div class="popup_anchor">
       <div class="Thumb popup_element clearfix" id="u4409"><!-- group -->
        <a class="anchor_item grpelem" id="untitled"></a>
        <div class="grpelem" id="u4433"><!-- image -->
         <img id="u4433_img" src="/images/n0060292x292.jpg" alt="" width="292" height="292" />
This may be a problem that came in a previous release of Muse.  I have a few older examples where ALT text is produced, but it’s no longer updated if I update the Image Properties.

I'm seeing the same problem. Looks like a bug to me. Any ideas as to how we can get this on Adobe's bug fix list?

Similar Messages

  • Problems with importing text messages from PC Suit...

    Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
     I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
     Thanks for your help

    Most phones only allows importing of draft and archived box for SMS.
    To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
    If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
    What's the law of the jungle?

  • Problem with restoring my HDD from .dmg image

    Hello,
    I encountered a problem with boot camp which couln't make a new partition for windows, because it couldn't move some files. It was a problem of defragmentation which i found surprisingly hard to solve. I'm a new mac user, and i was unable to find any defragmentation utility. Even the boot camp ask me to make and image of HDD, reformat it, and then restore from image. It was quite easy when i was reading it but after all i end up with new instalation of MacOS X without access to my files stored on HDD image.
    Here's what i did:
    1. I made images of HDD and and partition. To make images smaller i previously copied all of my multimedia files to PC. Images were created as read only, not compressed. They were stored on PC
    2. I have used disc utility after booting up from MacOS X CD, and made a new partition. It's name is the same as the one i made image from.
    3. Now it's the point when i should restore my partition from image but i encountered some problems. I copied images to mac again and was trying to restore partition from it but disc utility said it doesn't have any checksums or something like that. I read that it was a problem of verifying image with disc utility (the first button on the upper left side called verify.) It have checked image and made checksums but i still was unable to restore partition from it.
    Now, i know it might be silly to try restore HD from image on the same HD but shouldn't it shows some oder errors? After booting up from CD i can't connect to PC to browse it's resources and writing address (http://pcname/folder/partition.dmg) in source line in restore tab does not do anything.
    Is the only solution to connect a firewire hard drive to my mac with images on it? Or it is a problem with my images (making image process didn't showed any errors with HDD image and partition image).
    Moreover i cant access those images on my MBP cos it's says that there are no mountable file system. Does it means that this image is bad?
    Please help, I'm running out of options as i don't have firewire HDD and i'm really annoyed cos things like defragmentation are so easy on Windows and i don't get it why it's must be so complicated on Mac
    Sincerely
    PS sorry for my english
    Message was edited by: pazera

    *It said that my image don't have scan information and it needs to be imagescanned.

  • Problems with white text & transparency from Photoshop to Acrobat

    Hello Adobe Community!
    What I am doing: I have a design I created in Photoshop CC. This design has a transparent background. I am attempting to save this as a PDF in photoshop so I am able to open it in Adobe Acrobat XI Pro and print it on any color paper with only the design showing
    Issue: When I open the saved PDF in Acrobat. I can only see my white text and a faint outline of part of my design, and not even all the rest of the design.
    Then when I print it on color paper only the text shows up (with black stroke) on the paper along with my crop marks I made in the PS design. also when printed on color paper the text become transparent for some reason (Showing the paper color through the stroke), even though the text was made white and the PDF document shows white text
    Here are my steps:
    1.Create Design
    2.Save as..
    3.Save as type - Photoshop PDF
    4.[] As a copy, unchecked
    5.[Check] Layers, Checked
    6.OK
    7.General Settings -
    Adobe PDF Preset: [High Quality Print]
    Standard: None
    Compatability: Acrobat 9/10 (PDF 1.7+)
    Preserve Photoshop Editing Capabilities, Checked
    Embed page Thumbnails, Unchecked
    Optimize for fast web preview, Checked
    View PDF after saving, Unchecked
    8.Compression -
    Compression: None
    The rest of the settings are default.
    9.Open PDF from file
    10.Print with default settings
    11. Look at my butchered design in print
    12.Continued Frustration
    So for some reason its like Acrobat is 'Ignoring' the white in my design? I'm so confused and I've been at this for hours, going through forum post after forum post and it seems like i'm doing everything correctly but I'm not getting anywhere with it.
    I hope I added all necessary information, this is my first time posting here.
    Any ideas on what I'm doing wrong? Would someone mind looking at the file? any help would be very much appreciated.
    Note:Also I inverted the entire design making it all black instead of all white. followed same exact steps as above, and it printed perfectly. My confusion/frustration continues.

    You wrote: . . . also when printed on color paper the text become transparent for some reason (Showing the paper color through the stroke), even though the text was made white and the PDF document shows white text.
    You can't print white using an inkjet or laser printer because there isn't white ink or toner in your printer.
    The white needed to come from your paper which should be white.
    All printers and presses use CMYK inks or toner.
    What is the definition of White? C=0, M=0, Y = 0, K=0  so not a single droplet of any ink is being placed on the paper in any area that is supposed to be white..
    Of course the color of the paper will show in areas where there is no ink.
    When you see something white that is printed on a dark paper it using a special spot color Opaque White on a offset press..
    (there is a single inket model from Epson that can print an ink that appears to be white.  The model is $7,000 by the way. the [white] ink is $350, all the other inks are only $90)
    From the Epson website:
    Epson UltraChrome HDR White Ink introduces an all-new Organic Hollow Resin Particle Technology, which forces light to randomly scatter, producing the illusion of seeing the color white.
    Notice that even Epson only claims it produces the illusion of white.
    The only way around this issue is to print on White paper and print the "color of the paper" everywhere else on the paper that doesn't have your design elements.

  • A problem with copying text from english pdf to a word file

    i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
    i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .

    Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?

  • HT204150 I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

    I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

    It is locked to your sisters carrier.
    She would have to ask her carrier if they unlock iPhones and if she qualifies for this service.

  • Problem with the text from previous year in current year appraisal (PPR)

    Hi Gurus,
    I have some problem with the text from the PPR of the previous year in the PPR current year.
    The text from the previous year have not the same displaying in the tab "previous year" of  the current year PPR.
    EXAMPLE :
    this is write in the PPR of year 2009 in Individual Targets without Incentives (tab My S-imple) :
    -Aufrechterhaltung der MA motivation, in dieser Zeit der Neuorientierung.
    -G1 Unterstüzung
    -Fachübergreifende Teamarbeit ausbauen
    Gefährdungsbeurteilung weiter führen
    -tragen von PSA einfordern
    -VI Opt.(Intervalle)
    -Azubi und Praktikanten AUsbildung unterstüzen
    and this is what I have in the PPR of 2010 in Individual Targets without Incentives (tab Previous Year's Targets):
    -Aufrechterhaltung der MA motivation, in dieser Zeit der-Aufrechterhaltung der MA motivation, in dieser Zeit der
    -Aufrechterhaltung der MA motivation, in dieser Zeit der
    -Aufrechterhaltung der MA motivation, in dieser Zeit der
    -Aufrechterhaltung der MA motivation, in dieser Zeit der
    -Aufrechterhaltung der MA motivation, in dieser Zeit der
    -Aufrechterhaltung der MA motivation, in dieser Zeit der
    -Aufrechterhaltung der MA motivation, in dieser Zeit der
    there is the error, all the end of the text isn't displayed and the begin of the text is repeated.
    I think that this issue is created at the creation of the PPR.
    If someone have a idea he is welcom.
    thanks and regards

    Hi,
    Please follow the note:425601,
    Go to Tcode: OBA5 change the error messge into warning message. carry out the settlement and roll abck the warning message into the error message after sucessfull settlement.
    Reward points if found useful.
    Thanks!

  • Cisco ASA 5505 - problem with negotiating IP address from PPPoE

    Hi all,
    I have problem with negotiating IP address from PPPoE. There is following design: ISP providing vDSL ending on VDSL modem in bridge mode. Behind brigde modem is ASA 5505 terminting PPPoE on OUTSIDE. Everything works fine except  negotiating IP address from PPPoE server.
    I have configured ASA 5505 with (ASA Version 9.2(2)4) for PPPoE like this [1.]. But If i try to "show" IP address on OUTSIDE interface a get this [2.], ok strange but let's continue. If list "show vpdn pppinterface id 1"  i get this [3.]. Seems that I got public IP addres what was right, but this IP address was not associated with interface OUTSIDE?
    Well, if I set IP address manually like this [4.] and also set a default route everything works fine but what will happen when ISP change reservation for my IP address or default gateway. 
    I have tried different version of ASA OS like 8.4, 9.1 but without luck. 
    Can anybody help me. Thanks a lot.
    Regards
    Karel
    [1.]
    interface Vlan100
    description >>VLAN pro pripojeni do internetu<<
    nameif OUTSIDE
    security-level 0
    pppoe client vpdn group O2
    ip address pppoe setroute
    vpdn group O2 request dialout pppoe
    vpdn group O2 localname O2
    vpdn group O2 ppp authentication chap
    vpdn username O2 password *****
    interface Ethernet0/0
    description >>uplink O2 vDSL<<
    switchport access vlan 100
    [2.]
    ciscoasa(config-if)# show ip address vlan 100 pppoe
    ciscoasa(config-if)#  0.0.0.0 255.255.255.255 on Interface: OUTSIDE
    ciscoasa(config-if)# show interface vlan 100 detail
    Interface Vlan2 "OUTSIDE", is up, line protocol is up
     Hardware is EtherSVI, BW 100 Mbps, DLY 100 usec
            Description: >>VLAN pro pripojeni do internetu<<
            MAC address f44e.05d0.6c17, MTU 1492
            IP address unassigned
      Traffic Statistics for "OUTSIDE":
            28 packets input, 1307 bytes
            31 packets output, 721 bytes
            0 packets dropped
          1 minute input rate 0 pkts/sec,  3 bytes/sec
          1 minute output rate 0 pkts/sec,  1 bytes/sec
          1 minute drop rate, 0 pkts/sec
          5 minute input rate 0 pkts/sec,  0 bytes/sec
          5 minute output rate 0 pkts/sec,  0 bytes/sec
          5 minute drop rate, 0 pkts/sec
      Control Point Interface States:
            Interface number is 15
            Interface config status is active
            Interface state is active
    [3.]
    ciscoasa(config-if)# show vpdn pppinterface id 1
    PPP virtual interface id = 1
    PPP authentication protocol is CHAP
    Server ip address is 88.103.200.41
    Our ip address is 85.71.188.158
    Transmitted Pkts: 20, Received Pkts: 16, Error Pkts: 0
    MPPE key strength is None
      MPPE_Encrypt_Pkts: 0,  MPPE_Encrypt_Bytes: 0
      MPPE_Decrypt_Pkts: 0,  MPPE_Decrypt_Bytes: 0
      Rcvd_Out_Of_Seq_MPPE_Pkts: 0
    ciscoasa(config-if)# show vpdn session state
    %No active L2TP tunnels
    %No active PPTP tunnels
    PPPoE Session Information (Total tunnels=1 sessions=1)
    SessID TunID Intf     State       Last Chg
    22298      2 OUTSIDE  SESSION_UP  561 secs
    [4.]
    interface Vlan100
     description >>VLAN pro pripojeni do internetu<<
     nameif OUTSIDE
     security-level 0
     pppoe client vpdn group O2
     ip address 85.71.188.158 255.255.255.255 pppoe setroute
     route OUTSIDE 0.0.0.0 0.0.0.0 88.103.200.41 1

    You're right that the ACL should not affect otherwise allowed communications to the interface address.
    Try disabling the ip audit feature on your outside interface.
    no ip audit interface OUTSIDE AP_OUTSIDE_INFO
    no ip audit interface OUTSIDE AP_OUTSIDE_ATTACK

  • Problem with pdf display downloaded from application server

    Hi all,
    I have a problem with displaying pdf downloaded from application server (saved in BINARY MODE).
    I am getting the pdf output of adobe form in FPFORMOUTPUT-PDF as rawstring back to my program and then converting that rawstring into binary form using the function module SCMS_BINARY_TO_STRING.
    Now, when I export the data to presentation server directly using cl_gui_frontend_services=>gui_download, the pdf is downloaded properly.
    However, when I save the data to application server file by looping at the internal table obtained from SCMS_XSTRING_TO_BINARY and using TRANSFER, and subsequently downloading the file in "unconverted format" from AL11 to my desktop, I am getting a "blank" pdf file (with the same number of pages as the one downloaded using gui_download).
    I have tried different encodings during download but in those cases i get corrupted pdf message. only the default option of INTIAL value seems to work.
    I am forced to believe that there is a problem in my code which saves the data to app server but I cant find any solution that is logical. Any solution to this would be greatly appreciated.
    Regards,
    Sasi
    Edited by: Sasi Upadrasta on Sep 29, 2010 7:55 PM

    used a program to read the file from appl server and then downloading it to desktop.

  • Problem with selecting text in Adobe Reader XI

    Hi all, I am encountering a problem with Adobe Reader XI and it is very strange I could not find an alike issue on the internet so I guess I have to submit a question with it.
    So here it is, I am using Adobe Reader XI Version 11.0.2, operating system: Windows 7. I do not know it starts from when but it has the problem with selecting text - to be copied in pdf documents. I ensure that the documents are not scanned documents but word-based documents (or whatever you call it, sorry I cannot think of a proper name for it).
    Normally, you will select the text/paragraph you want to copy and the text/paragraph will be highlighted, but the problem in this case that I cannot select the text/paragraph, the blinking pointer (| <-- blinking pointer) will just stays at the same location so I cannot select/highlight anything to be copied. It happens oftenly, not all the time but 90%.
    This is very annoying as my work involves very much with copying text from pdf documents, I have to close the pdf file and then open it again so I can select the text but then after the first copying or second (if I am lucky), the problem happens again. For a few text I have to type it myself, for a paragraph I have to close all opening pdf documents and open again so I could select the paragraph to copy. I ran out of my patience for this, it causes trouble and extra time for me just to copying those texts from pdf documents. Does this problem happen to anyone and do you have a solution for this? I would much appreciate if you could help me out, thank you!

    Yeah,  I totally agree, this is very strange. I have always been using Adobe Reader but this problem only occurred ~three months ago. It must be that some software newly installed I think. But I have no idea.
    About your additional question, after selecting the texts and Ctrl + C, the texts are copied and nothing strange happens. It's just that right after I managed to copy the texts, it takes me a while to be able to select the texts again. For your information, I just tested to select the texts and then pressed Ctrl, the problem happened. And then I tried pressing C and then others letters, it all led to the problem.
    I guess I have to stick with left-clicked + Copy until I/someone figure the source of this problem. Thanks a lot for your help!

  • How can I add a title and ALT text to a JPEG image in Elements 11 for MAC?

    Does anyone know if there is an easy way I can add a title and ALT text to a JPEG image in Elements 11 for MAC?
    Very grateful for any help here.

    Hello
    The Arrange menu is your friend.
    You may select the arrow then "Bring to Front".
    Yvan KOENIG (from FRANCE vendredi 19 septembre 2008 17:49:50)

  • Adding Alt text to prducts catalog images...

    I cannot find information on how to add Alt Text to my product images in the catalogs. Can anyone help?
    Thanks,
    Andre
    www.e-speakers.com

    If you use {tag_largeimage_path} that gives you the raw URL of the large image for example and you can then set this up in your own html with alt tag of say the product name or title.

  • I am facing problem to get text file from application sever

    Hi This is lokesh.
    Actually my requirement is to craete sales orders by getting file from other server.for that i have used shell script to connect that server.Ok i am connecting to that different server(not sap server) successfully.
    But my problem is getting text file from application SERVER.
    That different server people will send the file name as 'DDHHMMSS' (Days,Hours,Minutes,Seconds).
    Just suppose if they will send today means that file name will come as 20103025. and with in half an hour if they again send that file file means that file name as '20110025'.
    like that file name is always varies.So how can i read that type of text files from the application server.
    and one more thing that is there chance to read morethan one text file from application server.
    Pls guide me if u know the solution.PLs this requirement is urgent.
    Regards,
    Lokeshgoud

    Hi..,
    <b>Just execute this program ... this is for the files received in JUST 3 MINS...</b>
    change it according to your requirement !!
    data time type sy-uzeit value '100000'. <i>"<<----start time</i>
    data file(8) type c value '20'.
    do 180 times. <i>" <<----- for 3 minutes</i>
    add sy-index to time.
    concatenate file time into file.
    write / file.
    OPEN DATASET FILE FOR INPUT IN TEXT MODE ENCODING DEFAULT.
    IF SY-SUBRC EQ 0.
    PERFORM READ_DATASET.
    ENDIF.
    file = '20'.
    time = '100000'.
    ENDDO.
    <b>form read_dataset.
    read the file here with the file name <b>FILE</b>.
    endform.</b>
    regards,
    sai ramesh

  • Problem with sending text messages replies

    After update to OS 3.0 I have problem with sending text messages:
    - I CAN send new text message to someone but
    - When someone REPLY me, then I CANNOT send next message in conversation
    - If I DELETE someone's reply from that conversation text message sends fine.
    Anyone have this problem? I have iPhone 3g with OS 3.0 update, previously on 2.x the problem didn't appear. Carrier Orange in Poland

    no my girlfriend, was useing my old N75, now she is useing her old phone last night and today. we have been texting with no problems at all. ..so i'm back in the iphone, and we're going to get her a new phone tonight,or she's going to use one of my other back-up phones till we get one for her. called at&t today to see if she could get an early upgrade before oct. just to make me happy with all the BS i've been through (10 hours or more on the phone trying to fix the problem). but at&t came through with their great customer satisfaction!!! NOT!!! so, gonna try and get her a good phone out of contract and see after hers and mine are up might just jump from at&t. very unhappy with them as how they handled this whole thing.

  • After update 8.1.2 i had problem with sync my content from ITunes with IPod

    After update 8.1.2 i had problem with sync my content from ITunes with IPod. It stucks on moment when its waiting for implementing changes (step 5 of 5) Hours and hours i'm waiting but still the same. So i cant use my Ipod at all. I restarted Ipod and delete and download Itunes again. Still stuck in the same moment. Help please. Someone has some problems like that?

    I have an error message saying that "An unknown error occurred (-54)"

Maybe you are looking for

  • How to generate a mail into the SAP Inbox

    Hi everyone, I have an MM Workflow that is starting correctly and a mail is supposed to be generated in the user Inbox in SAP after the completion of a material enhancement but it does not. The Workflow was copied from another system and it was worki

  • Issue with TBLAST and skipmissing

    Hello, We have an Essbase ASO application (v 11.1.1) that is used to show Balance type values, so we created an AmountMTD measure with TBLAST property. A new requirement appeared in our customer in order that AmountMTD for the current month should sh

  • OAF page is not able to display the custom error messages

    Hi, I have extended a seeded CO and trying to throw few custom error messages. It was working fine, but suddenly it is not able to display the error messages(but checked that the error messages are still present in application) and saying "Message no

  • LR5 Crashing in Library Module

    I'm flagging jpegs that I took at several races this weekend.  There are several thousand images that I'm trying to go quickly through.  Ideas on what is causing the crashes. Intel i7 CPU 950 @ 3.07GHz with 6GB RAM and HHD with 89GB free memory - pla

  • Offset Variables

    Hi I have a doubt and need to know if the offset functionality (replacement path) for variables (start and length) could be used? I have the following business requirement: There are two selection variables on the initial selection screen for a repor