Problem with ALV drill down Internet Application Component

Hi all,
If custom R/3 transaction (ALV drill down report) is converted to Internet Application Component (IACs) in ITS , the main ALV report is working fine. when i click on the sales order it should display invoices in a new ALV. This is working fine in R/3 but in ITS it is not working.
Can anyone help me.
thank you

this new ALV is a pop up, or navigation in the same screen or are you openning a new session?
Regards
Raja

Similar Messages

  • Problem with the Drill down in the BeX Query Report

    Hi Experts,
    I have a problem when drilling down the characteristics in the BeX Report. There are nearly 125 fields (characteristics) all in Free Characterictics. After executing the Query, in the report when i am selecting one characteristic for drill down i am getting the values of another characteristic. This is not happening to all 125 fields.
    Please let me know where is the problem and give me some suggestion what we can do with this.......

    Here is my VI, it's just a trial so it can look messy...
    Thanks,
    Isabel
    Message Edited by Isa_pm on 01-22-2007 01:12 PM
    Attachments:
    Create report.vi ‏96 KB

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • Hiding fields in ALV DRILLED DOWN REPORT

    Hi
    My scenario is like this i created a alv drilled down report , in that once the user executes it ,it will displays the header contents of the purchase order.
    If the user double clicks on any of the header line item it will displays the item detials of the particular header data..
    My probelm is if i double click  it i am getting the header details added with the item fields..i want to hide the header detials if i want to c the item level details..
    Can any suggest me some better ways to hide the header contents ??
    Arun Joseph

    hi,
    check ur field cat...
    R u using same name?
    If possible paste ur code here...

  • Problem with ALV search help Dictionary Search Help

    Hello experts
    I have a problem with ALV search help.
    I use DDIC table ZXXX with text table ZXXX_T. I created DDIC search help form table ZXXX. In my WD application, in context on COMPONENTCONTROLLER i set on attribute: 'Input help mode' as 'Dictionary Search Help' and in 'Dictionary Search Help' I pass name of new created DDIC search help.
    I create a input field from that atrribute and search help works fine (there was a value and description for value from text table). So I created ALV witch contains that attribute too.
    Next I set column for this attribute in ALV as editable but on Serch help for this collumn I have only value. I DON'T HAVE TEXT DESCRIPTION FOR VALUE.
    Please help me and tell me what I do wrong?
    Miko

    Hello,
    Thank's for your help. I create DDic Search help for all fields from my ALV. Next I changed 'TYPE' for all ALV fields in COMPONENTCONTROLLER from ZXXX-Zfield to Zfield, and I changed 'Input help mode' from 'Automatic' to 'Dictionary Search Help'. Now I see Value and Description for value in Search Help in my ALV.
    Regards
    Miko

  • A problem with this webpage caused Internet Explorer (IE9) to close and reopen the tab

    I have IE9 (using 32-bit version) installed on a relatively new laptop with Windows 7 64-bit. Up until last weekend IE9 worked fine and Flash Player worked fine too.
    At the weekend a webpage asked for Flash Player to be updated - which I did. Ever since then whenever I go to a webpage needing Flash Player I get the message "A problem with this webpage caused Internet Explorer to close and reopen the tab". This happens twice and then an IE9 error page.
    I have read the discussions in here about the problems with Flash Player 10.3 and have tried the various solutions. I have updated to 10.3.181.16 having tried 15 and 14 previously. Same problem.
    I have reset IE9. Same problem.
    I have disabled all add-ons which stops the problem. If I enable just the Flash Player add-on then the problem recurs. Since there are so many webpages that use Flash I do not want to run my browser without this add-on running.
    If I enable the add-on and run IE9 using software rendering instead of GPU rendering then I don't get the problem. However, this isn't exactly making the best use of the resources on my laptop.
    This may well all be related to the 10.3 problems but no one seems to have mentioned having a problem with tabs closing and reopening so I thought I would post on here to check.
    Any suggestions for how to solve this (other than using software rendering)?

    Thanks again for your reply. I appreciate the time you have taken to respond.
    I think, however, you misunderstand the problem. IE9 does not reopen the tabs on just one website - it is doing this on every website that needs Flash Player. Therefore, running in Compatibility mode is not an option. In fact, because IE9 reopens the tabs so quickly and then ends up with an error page, I cannot even click the Compatibility button anyway.
    I could use ActiveX filtering - true. All that this means is that Flash does not play on any of the websites. When I want to re-enable ActiveX for a particular website where I need to see the Flash Player item, this just triggers the error.
    This problem also happened on .14, .15 and well as the current .16 version. It did not happen with the previous version of Flash Player that I had on the system (version 10.2 I think).
    The fact is that either Flash Player or IE9 or both is/are broken. The two choices I am still left with are:
    1. Use software rendering (which contradicts the latest advertisements for IE9 about unleashing the power of IE)
    2. Use another browser - I have no problems with either Firefox or Chrome

  • Problem with pdf display downloaded from application server

    Hi all,
    I have a problem with displaying pdf downloaded from application server (saved in BINARY MODE).
    I am getting the pdf output of adobe form in FPFORMOUTPUT-PDF as rawstring back to my program and then converting that rawstring into binary form using the function module SCMS_BINARY_TO_STRING.
    Now, when I export the data to presentation server directly using cl_gui_frontend_services=>gui_download, the pdf is downloaded properly.
    However, when I save the data to application server file by looping at the internal table obtained from SCMS_XSTRING_TO_BINARY and using TRANSFER, and subsequently downloading the file in "unconverted format" from AL11 to my desktop, I am getting a "blank" pdf file (with the same number of pages as the one downloaded using gui_download).
    I have tried different encodings during download but in those cases i get corrupted pdf message. only the default option of INTIAL value seems to work.
    I am forced to believe that there is a problem in my code which saves the data to app server but I cant find any solution that is logical. Any solution to this would be greatly appreciated.
    Regards,
    Sasi
    Edited by: Sasi Upadrasta on Sep 29, 2010 7:55 PM

    used a program to read the file from appl server and then downloading it to desktop.

  • I have a problem with ALV Grid User Command?

    Hi Experts,
    I have a problem with ALV GRID User Command.
    I am calling TCODE IW33 (Order Display) from the ALV output at first time by selecting an order. But, User command is calling IW33 Initial screen with blank value of order. Even I checked in debugging the value what I selected is passing properly, but once that screen (IW33 Initial) displays, value doesn't appear. Then, Manually, I  created another session and gone to TCODE IW33 and displayed an order. After that I came out from that order. Then again run my ALV program and selected another order, now order is displaying, but not what I selected current order instead of displaying previous order what I just displayed manually. If I selected any other order, system will display the same order what I dislayed manually.
    Here is my code.
    FORM user_command_alv  USING u_ucomm TYPE sy-ucomm
                           us_self_field TYPE slis_selfield.
    CASE u_ucomm.
    WHEN '&IC1'.
    READ TABLE it_final INDEX us_self_field-tabindex INTO wa_final.
            WHEN 'ORDER'.
              IF NOT wa_final-order IS INITIAL.
                SET PARAMETER ID 'COK' FIELD wa_final-order.
                CALL TRANSACTION 'IW33' AND SKIP FIRST SCREEN.
              ENDIF.
    endform.
    PARAMETER ID 'COK'  also the standard one.
    Could you please help me out, Where I did wrong?
    If I select any order, that order only should display.
    Thanks in advance.
    Regards,
    Sarayu.
    Code Formatted by: Alvaro Tejada Galindo on Jan 8, 2009 2:33 PM

    hi,
    Please check it once the Paramater ID is 'ANR' for IW33 order number.
    Hope this may help.
    Regards,
    Sravanthi

  • Problem with ALV grid in edit mode

    Hello, gurus!
    I have a problem with ALV-grid. Sometimes when I call F4 help for a cell, data is inserted in a different cell.  And when I call check_changed_data method, my internal table (passed to ALV-control in set_table_for_first_display) does not updates properly. In what can be a problem?
    Thanks,
    Mikhail

    Hi Prabhu,
    MODULE pbo_100 OUTPUT.
      SET PF-STATUS 'MAIN100'.
      title_of_report = text-010.
      SET TITLEBAR '0100' WITH title_of_report.
      DATA: g_event_receiver TYPE REF TO lcl_event_handler.
      IF z_custom_container IS INITIAL .
        CREATE OBJECT z_custom_container
          EXPORTING
            container_name = 'ALV_ZAC'.
        CREATE OBJECT alv_grid
          EXPORTING
            i_parent = z_custom_container.
        g_repid = sy-repid.
        gs_variant-report = g_repid.
        x_save = 'A'.
        PERFORM check_alv_grid_fields.
        ps_layout-cwidth_opt = 'X'.
        ps_layout-edit = 'X'.
        CALL METHOD alv_grid->set_ready_for_input
          EXPORTING
            i_ready_for_input = '1'.
    *    CALL METHOD alv_grid->register_edit_event
    *      EXPORTING
    *        i_event_id = cl_gui_alv_grid=>mc_evt_enter.
        APPEND   s_list_rec   to it_list_rec.
        CALL METHOD alv_grid->set_table_for_first_display
          EXPORTING
            is_layout       = ps_layout
            is_variant      = gs_variant
            i_save          = x_save
          CHANGING
            it_fieldcatalog = pt_fieldcat
            it_outtab       = it_list_rec[].
        CALL METHOD alv_grid->register_edit_event
          EXPORTING
            i_event_id = cl_gui_alv_grid=>mc_evt_enter.
        CALL METHOD alv_grid->register_edit_event
          EXPORTING
            i_event_id = cl_gui_alv_grid=>mc_evt_modified.
    ENDIF.
    FORM check_alv_grid_fields .
      DATA: ls_fcat LIKE LINE OF pt_fieldcat.
    REFRESH pt_fieldcat .
    CLEAR: ps_layout, ls_fcat.
      ls_fcat-fieldname = 'VBELN'.
      ls_fcat-ref_field = 'VBELN'. ls_fcat-ref_table =  'LIPS'. " .
      ls_fcat-outputlen = 9.
    *  ls_fcat-datatype   = 'CHAR'.
    *  ls_fcat-inttype    = 'C'.
      APPEND  ls_fcat TO pt_fieldcat.
      CLEAR: ls_fcat.
      ls_fcat-fieldname = 'ERDAT'.
      ls_fcat-ref_field = 'ERDAT'. ls_fcat-ref_table = 'LIPS'.
      ls_fcat-outputlen = 9.
    *  ls_fcat-f4availabl = 'X' .
    *  ls_fcat-datatype   = 'DATS'.
    *  ls_fcat-inttype    = 'D'.
      APPEND ls_fcat TO pt_fieldcat.
      CLEAR: ls_fcat.
    ENDFORM.                    " check_alv_grid_fields
    FORM save_p .
      CLEAR l_valid.
      CALL METHOD alv_grid->check_changed_data
        IMPORTING
          e_valid = l_valid.
      IF l_valid IS INITIAL.
        CALL FUNCTION 'POPUP_TO_INFORM'
          EXPORTING
            titel = text-i01
            txt1  = text-i02
            txt2  = text-i03
            txt3  = text-i04.
      ELSE.
        i_dat_reg = zrumm_prr-cdprr.
        CLEAR is_temp_otc.
        freshit i_prrpus_fax.
        freshit i_list2_ot.
        LOOP AT it_list_rec INTO s_list_rec.
          MOVE-CORRESPONDING s_list_rec TO i_list2_ot.
          i_list2_ot-fgrup = 'RECE'.
          i_list2_ot-prrnu = i_num_prr.
          APPEND i_list2_ot.
          MOVE-CORRESPONDING s_list_rec TO i_prrpus_fax.
          APPEND i_prrpus_fax.
        ENDLOOP.
      ENDIF.
    Edited by: Mikhail Sarychev on Mar 16, 2011 6:41 AM
    Edited by: Mikhail Sarychev on Mar 16, 2011 6:49 AM
    Edited by: Mikhail Sarychev on Mar 16, 2011 6:49 AM

  • TS3694 Hi,I have an iphone 3g that is "not" jailbroken,nor have I tried,however,I had been having problems with it shuting down&not starting again so I updated&tried to restore only to have an error 1015.The iphone is now stuck on the connect to itunes,pl

    Hi, I have an Iphone 3g that is "Not" jailbroken, nor do I want it to be jailbroken. However, I had been having problems with it shuting down and not starting again. So, I tried to update and restore only to get an "error" 1015.
    It is now stuck on "connect to itunes"
    Any help would be great as this is a factory unlocked phone

    Apple in no way blocks devices.
    Carriers can blacklist devices from their network.  If that is what has occurred, only the carrier can remove the blacklist.  This should have nothing to do with your ability to activate the device and use it as an iPod.

  • I have a problem with Pages shutting down my documents.

      I have a problem with Pages shutting down my documents. I have several
    several documents on my homepage,but once I select one it shuts down and
    goes to the ipad homepage.Other documents open with no problem.
    Can someone tell me what's happening
    antdel

    Pages is crashing for some reason.
    You say that other documents open with no problems, do you mean other Pages documents or documents in another app?
    Try closing Pages completely in the recents tray and reboot your iPad. See if that helps. If it doesn't help, you may have to delete and reinstall Pages. If that doesn't work, you might have a corrupt document that you need to track down and delete.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Planning problems with russian language during refresh application

    Hello all ))
    I have problems with Planning during refresh my Application with Essbase.
    I intsalled Essbase on RHEL4 and set ESSLANG=Russian_Russia.ISO-8859-5@Default also I set locale on ru_RU.iso88595
    Ater that I installed Planning on Solaris 9 which uses Oracle RDBMS with NLS_CHARACTERSET=AL32UTF8 and set locale on server to ru_RU.iso88595
    Now I can create dementions, members on russion language in Essbase without problems also I can create dementions,members,etc on russian language in Planning. But if I create demention or member in Planning on Russian languge and ) try refresh my Application with Essbase I give follow error
    "=====(HspCubeCreation.java)sQueryString:?Application=Test1
    com.hyperion.planning.olap.EssbaseException: (1060010)
    at com.hyperion.planning.olap.HspEssbaseOutlineAPI.EssAddMemberEx(Native Method)
    at com.hyperion.planning.olap.HspCubeRefreshTask.addChildren(Unknown Source)
    at com.hyperion.planning.olap.HspCubeRefreshTask.addMembers(Unknown Source)
    at com.hyperion.planning.olap.HspCubeRefreshTask.addDimensionsAndMembers(Unknown Source)
    at com.hyperion.planning.olap.HspCubeRefreshTask.buildOutlines(Unknown Source)
    at com.hyperion.planning.olap.HspCubeRefreshTask.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)"
    Why it's happened?
    Please anybody help me

    since march 5 we are on planning 9.3.1.1 and also having problems with refreshing:
    com.hyperion.planning.HspCubeRefreshInProgressException: Cannot complete your request because the database is being refreshed.
         at com.hyperion.planning.HspJSImpl.lockApp(I)V(Unknown Source)
         at com.hyperion.planning.HyperionPlanningBean.lockApp()V(Unknown Source)
         at HspSecurityFilter.Handle(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(Unknown Source)
         at HspSecurityFilter.doPost(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3150)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
    com.hyperion.planning.HspCubeRefreshInProgressException: Cannot complete your request because the database is being refreshed.
         at com.hyperion.planning.olap.HspCubeRefreshTask.run()V(Unknown Source)
         at java.lang.Thread.run()V(Unknown Source)
    anyone a idea?

  • Problem with ALV filter functionality when filtered for multiple values

    Hi,
    I am facing a problem with ALV filter functionality.
    I have displayed an ALV with some columns col_A, col_B and col_C
    col_A---- col_B -
    col_C
    1----
    a -
    abc
    2----
    b -
    pqr
    3----
    c -
    lmn
    4----
    d -
    xyz
    5----
    f -
    stu
    From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
    Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
    i.e. after applying the filter the ALV table looks as below:
    col_A---- col_B -
    col_C
    3----
    c -
    lmn
    But ideally it should be:
    col_A---- col_B -
    col_C
    2----
    b -
    pqr
    3----
    c -
    lmn
    4----
    d -
    xyz
    I could not find any OSS note related to this issue.
    Please help me resolve this issue.
    Thanks,
    Feroz

    Hi,
    I am facing a problem with ALV filter functionality.
    I have displayed an ALV with some columns col_A, col_B and col_C
    col_A---- col_B -
    col_C
    1----
    a -
    abc
    2----
    b -
    pqr
    3----
    c -
    lmn
    4----
    d -
    xyz
    5----
    f -
    stu
    From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
    Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
    i.e. after applying the filter the ALV table looks as below:
    col_A---- col_B -
    col_C
    3----
    c -
    lmn
    But ideally it should be:
    col_A---- col_B -
    col_C
    2----
    b -
    pqr
    3----
    c -
    lmn
    4----
    d -
    xyz
    I could not find any OSS note related to this issue.
    Please help me resolve this issue.
    Thanks,
    Feroz

  • When trying to install a wireless printer, the WEP password says its incorrect. Is this a problem with the airport, my Internet provider or HP? I know the password is correct.

    When trying to install a wireless printer, the WEP password says its incorrect. Is this a problem with the airport, my Internet provider or HP? I know the password is correct.

    Your AirPort Extreme supports WPA.
    WEP is outdated and considered fairly useless, so use WPA.
    Be sure you are using AirPort Utility  5.6. If you are not running Lion then use AirPort Utility 5.5.3.
    AirPort Utility 6.0 cannot administer 802.11b/g base stations.

  • Problems with ALV - Excel after changing from 640 to 710

    Hi all,
    first i have to say, that i have tried to set this thread in the SAPGUI-Forum,
    but i didn't get any answers, therefore i try it here.
    I have changed our SAPGUI from 640 to 710. Now i get problems
    with ALV-GRID display.
    When i change the output to EXCEL-Inplace i get the Error-Message:
    0K000
    View cannot be switched: Product is not installed or integration is not active.
    In 640 i don't have any problems. We have ECC6.
    When i use GUI710 and SAP 4.6C i don't have any problems.
    Simple Test is possible with SE16N and change ALV output to excel-inplace.
    Can anybody help?
    Thanks.
    Regards, Dieter

    Hi Dieter,
    we had a similar problem who we resolved installing path the GUI710_1-10002995.EXE.
    Have you tried to install the patch?
    Bye
    Giovanni Mortati

Maybe you are looking for