Problem with ALV in Docking container

Dear All,
I have created an editable ALV in a docking container. In this ALV there are some custom buttons in the toolbar. In case a custom activity, in the toolbar, is executed some checks are performed which when fail an error message issued.
The problem: After the error msg is received if the user corrects the error and re-executes the toolbar custom activity the execution of the program is being terminated and it takes me out of the transaction which should not be the case. I tried to debug/place a hard break-point at the piece of code which should be executed but no success..
Note: In case i use a custom control then everything is working fine. The reason i want to use a docking container over a custom container, is that if the ALV is placed in a docking container it occupies the complete screen area irrespective of the resolution of the screen.
Can anyone help as to why this problem is happening and how it can be resolved.
Thanks in advance for your help.
regards
Nitesh

Well, if you want to try to use a custom container, the trick is to make the screen really big, and then make the container just as big, then double click on the control in screen painter, and set the vertical and horizontal resizing. Doing this will make the ALV adjust depending on screen resolution.
Regards,
RIch Heilman

Similar Messages

Problem with ALV search help Dictionary Search Help

Hello experts
I have a problem with ALV search help.
I use DDIC table ZXXX with text table ZXXX_T. I created DDIC search help form table ZXXX. In my WD application, in context on COMPONENTCONTROLLER i set on attribute: 'Input help mode' as 'Dictionary Search Help' and in 'Dictionary Search Help' I pass name of new created DDIC search help.
I create a input field from that atrribute and search help works fine (there was a value and description for value from text table). So I created ALV witch contains that attribute too.
Next I set column for this attribute in ALV as editable but on Serch help for this collumn I have only value. I DON'T HAVE TEXT DESCRIPTION FOR VALUE.
Please help me and tell me what I do wrong?
Miko

Hello,
Thank's for your help. I create DDic Search help for all fields from my ALV. Next I changed 'TYPE' for all ALV fields in COMPONENTCONTROLLER from ZXXX-Zfield to Zfield, and I changed 'Input help mode' from 'Automatic' to 'Dictionary Search Help'. Now I see Value and Description for value in Search Help in my ALV.
Regards
Miko

I have a problem with ALV Grid User Command?

Hi Experts,
I have a problem with ALV GRID User Command.
I am calling TCODE IW33 (Order Display) from the ALV output at first time by selecting an order. But, User command is calling IW33 Initial screen with blank value of order. Even I checked in debugging the value what I selected is passing properly, but once that screen (IW33 Initial) displays, value doesn't appear. Then, Manually, I created another session and gone to TCODE IW33 and displayed an order. After that I came out from that order. Then again run my ALV program and selected another order, now order is displaying, but not what I selected current order instead of displaying previous order what I just displayed manually. If I selected any other order, system will display the same order what I dislayed manually.
Here is my code.
FORM user_command_alv USING u_ucomm TYPE sy-ucomm
                       us_self_field TYPE slis_selfield.
CASE u_ucomm.
WHEN '&IC1'.
READ TABLE it_final INDEX us_self_field-tabindex INTO wa_final.
        WHEN 'ORDER'.
          IF NOT wa_final-order IS INITIAL.
            SET PARAMETER ID 'COK' FIELD wa_final-order.
            CALL TRANSACTION 'IW33' AND SKIP FIRST SCREEN.
          ENDIF.
endform.
PARAMETER ID 'COK' also the standard one.
Could you please help me out, Where I did wrong?
If I select any order, that order only should display.
Thanks in advance.
Regards,
Sarayu.
Code Formatted by: Alvaro Tejada Galindo on Jan 8, 2009 2:33 PM

hi,
Please check it once the Paramater ID is 'ANR' for IW33 order number.
Hope this may help.
Regards,
Sravanthi

Problem with ALV grid in edit mode

Hello, gurus!
I have a problem with ALV-grid. Sometimes when I call F4 help for a cell, data is inserted in a different cell. And when I call check_changed_data method, my internal table (passed to ALV-control in set_table_for_first_display) does not updates properly. In what can be a problem?
Thanks,
Mikhail

Hi Prabhu,
MODULE pbo_100 OUTPUT.
SET PF-STATUS 'MAIN100'.
title_of_report = text-010.
SET TITLEBAR '0100' WITH title_of_report.
DATA: g_event_receiver TYPE REF TO lcl_event_handler.
IF z_custom_container IS INITIAL .
    CREATE OBJECT z_custom_container
      EXPORTING
        container_name = 'ALV_ZAC'.
    CREATE OBJECT alv_grid
      EXPORTING
        i_parent = z_custom_container.
    g_repid = sy-repid.
    gs_variant-report = g_repid.
    x_save = 'A'.
    PERFORM check_alv_grid_fields.
    ps_layout-cwidth_opt = 'X'.
    ps_layout-edit = 'X'.
    CALL METHOD alv_grid->set_ready_for_input
      EXPORTING
        i_ready_for_input = '1'.
*    CALL METHOD alv_grid->register_edit_event
*      EXPORTING
*        i_event_id = cl_gui_alv_grid=>mc_evt_enter.
    APPEND   s_list_rec   to it_list_rec.
    CALL METHOD alv_grid->set_table_for_first_display
      EXPORTING
        is_layout       = ps_layout
        is_variant      = gs_variant
        i_save          = x_save
      CHANGING
        it_fieldcatalog = pt_fieldcat
        it_outtab       = it_list_rec[].
    CALL METHOD alv_grid->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_enter.
    CALL METHOD alv_grid->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_modified.
ENDIF.
FORM check_alv_grid_fields .
DATA: ls_fcat LIKE LINE OF pt_fieldcat.
REFRESH pt_fieldcat .
CLEAR: ps_layout, ls_fcat.
ls_fcat-fieldname = 'VBELN'.
ls_fcat-ref_field = 'VBELN'. ls_fcat-ref_table = 'LIPS'. " .
ls_fcat-outputlen = 9.
* ls_fcat-datatype   = 'CHAR'.
* ls_fcat-inttype    = 'C'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR: ls_fcat.
ls_fcat-fieldname = 'ERDAT'.
ls_fcat-ref_field = 'ERDAT'. ls_fcat-ref_table = 'LIPS'.
ls_fcat-outputlen = 9.
* ls_fcat-f4availabl = 'X' .
* ls_fcat-datatype   = 'DATS'.
* ls_fcat-inttype    = 'D'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR: ls_fcat.
ENDFORM.                    " check_alv_grid_fields
FORM save_p .
CLEAR l_valid.
CALL METHOD alv_grid->check_changed_data
    IMPORTING
      e_valid = l_valid.
IF l_valid IS INITIAL.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        titel = text-i01
        txt1 = text-i02
        txt2 = text-i03
        txt3 = text-i04.
ELSE.
    i_dat_reg = zrumm_prr-cdprr.
    CLEAR is_temp_otc.
    freshit i_prrpus_fax.
    freshit i_list2_ot.
    LOOP AT it_list_rec INTO s_list_rec.
      MOVE-CORRESPONDING s_list_rec TO i_list2_ot.
      i_list2_ot-fgrup = 'RECE'.
      i_list2_ot-prrnu = i_num_prr.
      APPEND i_list2_ot.
      MOVE-CORRESPONDING s_list_rec TO i_prrpus_fax.
      APPEND i_prrpus_fax.
    ENDLOOP.
ENDIF.
Edited by: Mikhail Sarychev on Mar 16, 2011 6:41 AM
Edited by: Mikhail Sarychev on Mar 16, 2011 6:49 AM
Edited by: Mikhail Sarychev on Mar 16, 2011 6:49 AM

Problem with ALV filter functionality when filtered for multiple values

Hi,
I am facing a problem with ALV filter functionality.
I have displayed an ALV with some columns col_A, col_B and col_C
col_A---- col_B -
col_C
1----
a -
abc
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
5----
f -
stu
From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
i.e. after applying the filter the ALV table looks as below:
col_A---- col_B -
col_C
3----
c -
lmn
But ideally it should be:
col_A---- col_B -
col_C
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
I could not find any OSS note related to this issue.
Please help me resolve this issue.
Thanks,
Feroz

Hi,
I am facing a problem with ALV filter functionality.
I have displayed an ALV with some columns col_A, col_B and col_C
col_A---- col_B -
col_C
1----
a -
abc
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
5----
f -
stu
From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
i.e. after applying the filter the ALV table looks as below:
col_A---- col_B -
col_C
3----
c -
lmn
But ideally it should be:
col_A---- col_B -
col_C
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
I could not find any OSS note related to this issue.
Please help me resolve this issue.
Thanks,
Feroz

I'm having problems with FlashPlayerPlugin and plugin-container. They keep starting up and bogging down the system. This has been a recent occurrance. I've made sure that I have the latest version. I notice the problem when I am opening some applicatio, a

I'm having problems with FlashPlayerPlugin and plugin-container. They keep starting up and bogging down the system. This has been a recent occurrance. I've made sure that I have the latest version. I notice the problem when I am opening some applicatio, and it freezes. If I go to Task Manager, I can see the two Adobe apps sucking up CPU cycles. If I end the processes, then the other apps continue. Today, I uninstalled FlashPlayerPluginqand plugin-container. All day since I have had no freezing of an app. What should I do to correct the problem?

Here's an explanation of what those processes are.
Inside Flash Player Protected Mode for Firefox
I'm curious about what you did to uninstall just those.

I keep getting a message about a problem with the plug in container for firefox. what does it mean?

I am getting a pop up box saying that there is a problem with the plug in container for firefox. It keeps saying do I want windows to find a fix for it and close it or do I just want to close the program. What is this plug in container for firefox and why am I constantly getting this message? It has been happening for the past month or two.

It means either you have a faulty/out of date plugin, or your firewall/antivirus is causing problems with Firefox.
Make sure you update all your plugins and disable unwanted ones.
https://www.mozilla.org/en-US/plugincheck/
https://support.mozilla.org/en-US/kb/disable-or-remove-add-ons
Also, make sure your firewall/antivirus is not blocking plugincontainer.exe from the Firefox folder in your computer. How you make sure that's not the case will depend on your firewall/antivirus.

Problems with ALV - Excel after changing from 640 to 710

Hi all,
first i have to say, that i have tried to set this thread in the SAPGUI-Forum,
but i didn't get any answers, therefore i try it here.
I have changed our SAPGUI from 640 to 710. Now i get problems
with ALV-GRID display.
When i change the output to EXCEL-Inplace i get the Error-Message:
0K000
View cannot be switched: Product is not installed or integration is not active.
In 640 i don't have any problems. We have ECC6.
When i use GUI710 and SAP 4.6C i don't have any problems.
Simple Test is possible with SE16N and change ALV output to excel-inplace.
Can anybody help?
Thanks.
Regards, Dieter

Hi Dieter,
we had a similar problem who we resolved installing path the GUI710_1-10002995.EXE.
Have you tried to install the patch?
Bye
Giovanni Mortati

Problems with ALV - Excel after changin from 640 to 710

Hi all,
i have changed our SAPGUI from 640 to 710. Now i get problems
with ALV-GRID display.
When i change to EXCEL-Inplace i get the Error-Message:
0K000
View cannot be switched: Product is not installed or integration is not active.
in 640 i don't have any problems.
Can anybody help?
Thanks.
Regards, Dieter

Hi Roman,
in Service.sap.com there is the first patch-level of the new GUI7.10.
i have install it without any problems.
The problem i had with excal-inplace is solved.
Regards, Dieter

OOPS ALV using Docking container

Hi,
I am trying to use ALV using oops concept, but the report is not displaying the ALV grid.
{please let me know if there are any error.
Edited by: Arunsri on Jun 3, 2010 5:42 PM
Edited by: Rob Burbank on Jun 3, 2010 11:57 AM

data : alv_container type ref to cl_gui_docking_container.
data : alv_grid type ref to cl_gui_alv_grid.
data : layout type lvc_s_layo.
data : variant type disvariant.
check alv_container is initial.
CREATE OBJECT alv_container
 EXPORTING
* parent =
 repid = sy-repid
 dynnr = sy-dynnr
 side = alv_container->dock_at_left
* extension = 1550
* style =
* lifetime = lifetime_default
* caption =
* metric = 0
* ratio = '95'
* no_autodef_progid_dynnr =
* name =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5
 OTHERS = 6
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*- Make the docking container as parent to the grid
CREATE OBJECT alv_grid
 EXPORTING
 i_parent = alv_container
 EXCEPTIONS
 error_cntl_create = 1
 error_cntl_init = 2
 error_cntl_link = 3
 error_dp_create = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* layout-zebra = 'X'.
PERFORM build_fieldcat.
variant-report = sy-repid.
*- Call grid for display
CALL METHOD alv_grid->set_table_for_first_display
 EXPORTING
 i_structure_name = 'WT_TEST'
 is_variant = variant
 i_save = 'A'
* is_layout = layout
 CHANGING
 it_outtab = WT_TEST
 it_fieldcatalog = wt_fcat_log
 EXCEPTIONS
 invalid_parameter_combination = 1
 program_error = 2
 too_many_lines = 3
 OTHERS = 4
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.

Problem with ALV Grid Hotspot

Hi ,
I am having a problem with Hotspot <<removed_by_moderator>>
I need to Open up SE16 and need to skip the first screen of the Table 'ZLE_WH01' and display the selection screen with the MATNR passed from my ALV Report.
I tried using Call Transaction and Submit commands, but couldn't achive my target.
when I used SUBMIT and pass the MATNR Value to the SE16 selection screen for the corresponding Table, the value is appearing in the MATNR field of the Selection screen but the Execute button is not working.
When I try the Call Transaction Method, the value is not capturing in the 2nd screen. Table name is capturing in the first screen.
Kindly advice me how to resolve this issue.
Regards,
Srinivas
Edited by: Vijay Babu Dudla on Feb 25, 2009 11:08 PM

For se16
Use fm SE16N_INTERFACE
a®

Background task problem with alv grid display

Hello !
I have a problem when executing my program in background.
In foreground I have no problem, my ALV appears. In the background I have a dump.
The current ABAP program "SAPLKKBL" had to be terminated because one of the statements could not be executed.
I use the function module 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = gd_repid
 i_callback_user_command = 'F533_USER_COMMAND'
 is_layout = gd_layout
 it_fieldcat = fieldcatalog[]
 it_special_groups = i_fgroup[]
 i_save = 'X'
 it_sort = gd_sort
 i_buffer_active = ' '
 i_callback_pf_status_set = 'F534_SET_PF_STATUS'
 TABLES
 t_outtab = mytab
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
I don't understand where the problem is. Please help me.
Thank you.

I love replying to old threads:
Try this link
http://scn.sap.com/people/prashant.patil12/blog/2007/02/20/displaying-alv-grid-in-background-job

Strange problem with portable iPod dock

I recently bought an iLive portable dock so that I could listen to my iPod at work. It worked just fine the first few weeks and then I took my iPod on a car trip and used one of those adapters that finds an available radio frequency to play your iPod over your car radio. When I went back to work the following week my iPod no longer worked right on the portable system. I have to turn the volume all the way up on the system and even then it's all static and you can barely hear the song. I can't imagine that it has anything to do with using the adapter in the car but that's the only thing I can think of since it worked fine before this. What's really strange is that my husband's iPod works fine on the portable system and he's used the car adaptor many times. I don't think it's a problem with the iPod itself because it works fine using the headphones and hooked up to the computer. Furthermore, the speakers on the portable sytem are good because my husband's iPod works on it and I can play the radio just fine through it. I'm at a complete loss and I can't figure out what could have caused this problem. As I said, my iPod worked just fine for three weeks prior to this and out of the blue this happened. Now I can't listen to my iPod at work and it really *****.

Does teh FM radio thingy plug into the iPod's dock connector on the bottom?
Have you inspected the pins in the dock connector of your iPod with a magnifying glass? You might have dirt, corrosion, film, something on the pins not giving you a good connection to the signal pins on the connector (but not on the USB power and Sync pins so the iPod would still sync ok to the computer).
Patrick

Problem with slash character in CONTAINS queries

Hi there,
i've got a problem with a CONTAINS query using Oracle Text.
The following query works fine:
select col1 from my_table_text where contains(text,'%02%')>0;
When i'm trying the query
select col1 from my_table_text where contains(text,'%02/%')>0;
the following error occurs:
ORA-29902: error in executing ODCIIndexStart() routine
ORA-20000: Oracle Text error:
DRG-50937: query too complex
I didn't find anywhere that the slash has a special meaning (escape character or something else). This occurs only when the slash character is positioned immediately after or before the % operator. The search string '%0/2%' works.
Oracle version: 9.2.0.1.0
OS: Solaris 8 SPARC
Maybe someone can help me.
Thanks in advance,
Chris

Hi Chris,
I think you want to search for all words having '02/'.
Am I right? In that case try using '02//'
Yes. '/' means escape character. So when it finds '/%' it tries to escape '%'.
Hope this helps.
Regards,
Anupama

Problem with ALV list

Hi friends,
 I have created one program with alv list, but i am unable to add one header and footer, also i have to add one logo to the program. Plese some one tell me a easy procedure to add a header, footer and also a logo. If you can show me one with example that would be very helpful.
This is my program, plz add the necessary parts.
*& Report Y_BOM2_ALV
REPORT y_bom2_alv LINE-SIZE 350 LINE-COUNT 350.
*& Include YINCLUDE1
TABLES : mast, stko, stpo.
TYPE-POOLS : slis.
DATA : BEGIN OF iall OCCURS 10,
matnr LIKE mast-matnr,
werks LIKE mast-werks,
stlan LIKE mast-stlan,
stlal LIKE mast-stlal,
stlst LIKE stko-stlst,
posnr LIKE stpo-posnr,
idnrk LIKE stpo-idnrk,
menge LIKE stpo-menge,
meins LIKE stpo-meins,
ausch LIKE stpo-ausch,
lgort LIKE stpo-lgort,
END OF iall.
DATA : i_repid LIKE sy-repid,
i_lines LIKE sy-tabix.
DATA : int_fcat TYPE slis_t_fieldcat_alv.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE title1.
PARAMETER : p_werks LIKE mast-werks.
SELECT-OPTIONS : s_matnr FOR mast-matnr.
SELECTION-SCREEN END OF BLOCK a1.
INITIALIZATION.
title1(50) = ' Bill Of Material Input Screen '.
*& Include YINCLUDE2
START-OF-SELECTION.
SELECT mastmatnr mastwerks maststlan maststlal stko~stlst
stpoposnr stpoidnrk stpomenge stpomeins stpo~ausch
stpo~lgort INTO TABLE iall FROM stpo INNER JOIN stko ON
stpostlnr = stkostlnr INNER JOIN mast ON
stpostlnr = maststlnr WHERE mast~werks EQ
p_werks AND mast~matnr IN s_matnr.
IF sy-subrc <> 0 OR p_werks EQ ' ' OR s_matnr EQ ' '.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
titel = 'ERROR MESSAGE ( INPUT ERROR / WRONG INPUT ) '
textline1 = ' PLANT / MATERIAL Invalid or Empty '
textline2 = ' Plese enter plant no / material no again '
start_column = 20
start_row = 5.
EXIT.
ENDIF.
CLEAR i_lines.
DESCRIBE TABLE iall LINES i_lines.
IF i_lines LT 1.
WRITE: /
'No materials found.'.
EXIT.
ENDIF.
END-OF-SELECTION.
i_repid = sy-repid.
*& Include YINCLUDE3
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = i_repid
i_internal_tabname = 'IALL'
i_inclname = i_repid
CHANGING
ct_fieldcat = int_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
WRITE: /
'Returncode',
sy-subrc,
'from FUNCTION REUSE_ALV_FIELDCATALOG_MERGE'.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = i_repid
it_fieldcat = int_fcat
i_save = 'A'
TABLES
t_outtab = iall
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
WRITE: /
'Returncode',
sy-subrc,
'from FUNCTION REUSE_ALV_LIST_DISPLAY'.
ENDIF.

Hi Tapodipta,
See below example and modify ur code according to ur requirement..
REPORT ZTEST_ALV_CHECK .
TYPE-POOLS: SLIS.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
 IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 L_LAYOUT type slis_layout_alv,
 x_events type slis_alv_event,
 it_events type SLIS_T_EVENT.
DATA: BEGIN OF ITAB OCCURS 0,
 VBELN LIKE VBAK-VBELN,
 POSNR LIKE VBAP-POSNR,
 END OF ITAB.
SELECT VBELN
 POSNR
 FROM VBAP
 UP TO 20 ROWS
 INTO TABLE ITAB.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-SELTEXT_L = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-SELTEXT_L = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 2.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
x_events-NAME = SLIS_EV_END_OF_PAGE.
x_events-FORM = 'END_OF_PAGE'.
APPEND x_events TO iT_EVENTS.
CLEAR x_events .
x_events-NAME = SLIS_EV_TOP_OF_PAGE.
x_events-FORM = 'TOP_OF_PAGE'.
APPEND x_events TO iT_EVENTS.
CLEAR x_events .
x_events-NAME = slis_ev_end_of_list.
x_events-FORM = 'END_OF_LIST'.
APPEND x_events TO iT_EVENTS.
CLEAR x_events .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
 I_CALLBACK_PROGRAM = SY-REPID
 IS_LAYOUT = L_LAYOUT
 IT_FIELDCAT = IT_FIELDCAT
 it_events = it_events
TABLES
 T_OUTTAB = ITAB
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOP_OF_PAGE.
* BREAK-POINT.
WRITE: / 'TOP_OF_PAGE'.
ENDFORM.
FORM END_OF_LIST.
* BREAK-POINT.
"here you can use this for footer
WRITE: / 'FOR FOOTER'.
ENDFORM.
FORM END_OF_PAGE.
* BREAK-POINT.
WRITE: / 'END_OF_PAGE'.
ENDFORM.
Go through the link as well..
Re: ALV Footer
Hope it will solve ur problem..
Reward points if useful..
Thanks & Regards
ilesh 24x7

Problem with ALV in Docking container

Similar Messages

Maybe you are looking for