Problem with Amarok/Opera/Virtualbox appearance

I use a plain fluxbox session and only a few non-GTK apps, such as K3B, Amarok, Opera and Virtualbox. Thing is I have KDE 4 stuff installed, and I'm guessing these apps are still KDE 3.x, so in the new "systemsettings" control panel when I change the appearance of KDE (colours, etc.) these apps do not change, they look the same. (I used to use "kcontrol" just fine but can't any longer).
How can I change their look? I tried "qtconfig" but that does nothing. Also tried amarok 2 alpha but it didn't run well.
Thanks for any help folks

Thanks Mimi, I can see in this qtconfig I can change the colour scheme and whatnot, however when I do File > Save it does not alter Amarok's appearance, even after restarting Amarok? Thanks for your help!

Similar Messages

HT201412 Have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (too many apps) - any help greatly appreciated

I have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (foolishly loaded up too many apps) - any help/advice greatly appreciated

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Problems with Sequence Operator in OWB

Hi everybody,
i want to use a sequence in my mapping. Now i have two problems.
The first problem is the following. When i want to import my sequence (exists on my DB) i can select the sequence in the Selection Window, but when i click on Import i didn't see it in the Design Center, also there is no window which tells me that i have successfully imported the sequence.
The second problem is, when i drag the Sequence Operator into my Mapping i shows the Selection Window where i have to select the poject and object to bind the operator. But i can't select any object.
Can anyone help me with my problems and tell me how i can use a Sequence and the Sequence Operator in my Mapping
Many thanks in advance.
Greetings

Hi everyone!
I'm having a repeated problem with sequences in OWB: I'm filling a TIME table with 1096 rows. Now matter how and when I create the sequence it always starts with 2 instead of 1. Moreover, the last value of the sequence is 1101, when it was supposed to be 1097 or 1098....
I did achieve the right ouput sometimes, but I must be doing something wrong. Here are the several ways I've tried in OWB:
1) I've created all the sequences by sql code, in SQL DEVELOPER or PLUS*, and then imported to OWB. Because of being imported, I didn't have to deploy each sequence. Then, I've connected (by drag and drop to the canvas mapping) the sequence I wanted with NEXTVAL (as I always do) attached do TIME_ID of table TIME;
2) I've dropped and created, several times(as before), the sequences and never had problems..until now. I've also experimented creating, by scratch, the sequences just in OWB and then deploy them in Control Center. After this, deployed the mapping and executed, just like in 1).
So, the difference lies on how I create the sequences and what are the correct steps to create, deploy (if needed), deploy the map and execute the map.
This is insain and I really need this to work. I've tried so many ways....
Could someone PLEASE help me with this? Any thoughts?

Problem with the operator less than or equal to in a weby query

Hi all.
The universe is a OLAP Universe
When i created a query in webi and put the month in the filter area with the operator less than or equal to like this.
Month (less than or equal to) 2010.01 for example. The all result brings also the all values like 2010.02, 2010.03, etc
What is the problem and how can fix that ?
Thanks

Looks like you are using a less than or equal to with a Sting data type.
I think you should change to your filter to Year <= 2010 And Month <= 1. Hope you have a month and year object in you BeX.
Anil

Problems with Amarok and accents in filenames [SOLVED]

Hello,
First of all sorry for my bad english.
I have just installed Arch with KDE4.
I have my music collection in a NTFS partition, and I have managed to have Dolphin show accents correctly by installing ntfs-3g.
All software I have tested is able to open files which contain accents in its filename from the NTFS partition without problem except amarok. For example, VLC can play any mp3 without problems, but amarok is unable to play all files which contain an accent or files whose parent directory contains an accent, despite the fact that it adds the files correctly to the collection.
Is someone experiencing the same problem or know a solution?
(SOLUTION)
I managed to solve it changing the system locale to UTF8. It caused a mess of filenames with some of my documents but I managed to restore them from a backup.
Thanks
Last edited by Amt0571 (2010-06-18 22:24:23)

That one indeed was the 1 pixel border bug.
I have now solved this, atleast partially I believe. I am now using ArchSimple theme, which I modified to have 2px borders and better colors for my taste.
Compositions are still not working, and I do not know why. I have multiple monitors and I am using twinview instead of Xinerama and it should work with it - atleast that is what wiki says if I have not missed anything. The networkmanager menu is still a bit weird looking, but atleast it is not that ugly anymore. Below is a screenshot from current state:
http://dl.dropbox.com/u/27198869/images … 1%3A54.png
I will mark this as solved now, even though there are still some minor issues which I think do not belong to this thread, but I will list them below anyway if someone knows something about them. I have not found answers for these:
- GTK checkbox enabled state is way too light. It is hard to see if it is enabled or not. I can not find any docs about it.
- GTK combobox, when I click it open, list background is black and text is black. Only the hovered text is visible. No docs about this either.
- Compositions still not working. But that is not really the most important feature I need. I can live without it.
- My menus are themed as white on black, but some menus are still black on grey (or white). But I can live with it.

7914, Problems with "Hold" and "Transfer" appearance

We have a site that is experiencing problems with the line appearances on the 7914s that the assistances have in order to view their manager's extensions.
The Line text label is configured for "Name + DN" so the assistant can keep track of the lines when they ring and the CID appears next to the LTL.
When the call is picked up via the 7914 and transfered, the line text label on the other 7914's in the office change from displaying the "Name + DN" to the name of the person who transfered the call.
This is very confusing for the staff who is trying to keep track of the calls and who they are for.
Is there any way to prevent this from happening, or alternatively, to have line text label appear ALL the time and never CID or the transfering partys name appear??
Thank you for any help or assistance with this!

Any ideas? I'm guessing this is a "feature" that cannot be changed?
Thanks

Problem With mac Operating system

ok, had a problem with a piece of software and was told to try and "downgrade" my OS. so i started an installer that was an installer to a previous system. i was on 4.8 and was trying to go to 3.4 i think. I got half way thru and it said start the installer again. restarted. instead of the apple logo coming up a round cross comes up. i connected to my comp thru another comp using the firewire but my user folder is empty. anyways i can find anything in the users folder and fix this problem? cheers

Who told you to downgrade your OS X version and was this due to the software not being compatible with your OS X version which was 10.4.8?
What software?
Your computer detail provided indicates you have an Intel Mac and if so, you certainly cannot downgrade to 10.3 - any 10.3.x version. All Intel Macs have shipped with Tiger (10.4.x) pre-installed and there are no OS X versions prior to 10.4.x that is compatible with an Intel Mac and even if so, you cannot install an earlier or previous OS X version on a Mac that shipped with a later version.
Unless you meant 10.4.3 which is the version that was pre-installed on your Intel Mac and the version included with the OS X install package that shipped with your Mac when new.
Did this person who told you to downgrade your OS also tell you to be sure to create a backup or update your existing backup before doing so?
Did you choose Archive & Install with an option to preserve user and network settings?
If not and you choose Erase & Install, then your hard drive was completely erased first.

Problem with zip operating system command

Hello,
i have the following configuration in the file receiver adapter:
Directory: /tmp/
File Name Scheme: %name%.txt
Variable substitution:
Variable Name: name Reference: payload: record,1,name,1
Run Operating system command:
/usr/bin/zip /tmp/%f.zip %F
The execution is succesful, but i have a small problem. The file name is "file.txt.zip", the .txt should appear but i dont know how to skip it, I have tried so many ways but it doesnt work, I should receive a file called "file.zip" With a file inside in txt format...
Thanks,
Luis

Hi Sriram,
Thanks, but that wouldnt work out, Im using the %f for my file name, so this move command shouldnt work for me, because my filename changes in every execution, so I cant write something like this: mv file.txt.zip file.zip
The only solution I see would would be a command which deals with strings and that could remove the four last characters of "%f"..but I havent found anything for doing it.
Regards,
Luis

Problem with pending operations after migrating to gw2014

Hi there, this saturday we have migrated to gw2014 from gw2014. We are in a cluster environment.
We only have one primary domain with one post office, all users are in this post office.
We have several secondary domains for gwia/webaccess only.
Mail flow is ok. Mails are coming in and coming out, but administrative message between domains
are not flowing. For example: if I add a new account in the post office, I cant see this new account
in secondary. Also, for creating new domains, etc. I dont know whats happening, all mta's are open
in mta console from the primary. This is a very critical issue for me...
Where I can debug this pending operations ? How can I know whats happening ? I dont know if I have
a network issue / problem or its something related to GW system...
please help!
Antonio

Something like that happened to me also. It turned out that the gw install did not copyed the dc files to the mta, poa directory. After copying the dc files manually, admin messages started to flow again.

Problem with define operation

I have wsdl file (simple part of it here)
<message name="otnAsyncServiceRequestMessage">
<part name="peiSessionID" type="xsd:string">
</message>
<message name="otnAsyncServiceResultMessage">
<part name="payload" type="xsd:string"/>
</message>
<portType name="otnAsyncService">
<operation name="initiate">
<input message="tns:otnAsyncServiceRequestMessage"/>
</operation>
</portType>
And my process call async thi service using otn_jaxrpc.jar
Here simple code from bpel file
<assign name="assign-1">
<copy>
<from expression="ora:getConversationId()">
</from>
<to variable="otnAsyncServiceReq" part="peiSessionID"/>
</copy>
</assign>
<invoke name="invokeOTNAsyncService" partnerLink="otn" portType="er2004:otnAsyncService" operation="initiate" inputVariable="otnAsyncServiceReq"/>
<receive createInstance="no" name="receiveFromOTNCallBack" partnerLink="otn" portType="er2004:otnAsyncServiceCallback" operation="onResult" variable="otnAsyncServiceRes"/>
.... i look at result throw tcpmon
and soap envelope look like this
</soapenv:Header>
<soapenv:Body><peiSessionID xmlns="http://er2004.ifirst.ru"/></soapenv:Body>
</soapenv:Envelope>
But i have no peiSessionID operation in wsdl!
And my service not define any operation with that name?!
what's a problem!
Help please!!!

First, check if you have any calendar notes or appointments that you entered without a subject. Delete that note and try to sync.
I hope this helps!
Post relates to: Tungsten E2

Having Problem with Full Screen Videos Appearing with 1" Vertical Borders

I have a MAC running on Leopard and a PC with Windows Vista
Home Basic and Explorer.
I cannot get YouTube to go full screen without the vertical
borders appearing.
I have the current version of Adobe.
I need help on both systems. My Java is enabled and I've
already checked and unchecked Enable Hardware Acceleration.
This is not a Window Box problem. Its happening on all
videos.
Thank you for your help.

This could a RAM case, as when the phone is doing something and RAM goes down, it starts to close certain apps. Personally if all you wanted was a name on txt msg alerts I would recommend iSMS or ThreadSMS. AFAIK both works on on non-touch phones (iSMS was originally for s60v3) and not only do they provide the senders name on the text alert, they also let you view your messages in conversation view (iphone style) and are free...XD
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Problem with IN operator

I'm having a strange problem when using IN operator in a query. The following query works in one database which is 9i and does not work(not returning any rows) in another database which is 10g.
select * from <table>
where <column> IN
(select <column> from <view>
where <column> = <value>
Another thing is if I replace the view with a table the query returns results in 10g. If I replace IN operator with a '=' the query returns results.
The question is:
Am i missing any default setting in database level? Why the query did not return any rows when I use view? Any ideas?
Thanks in advance,

Hi,
I agree with Walter.
REgarfds salim.
SQL> create view v_emp as select * from emp;
View created.
SQL> select * from v_emp;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7369 SMITH      CLERK           7902 17-DEC-80        800                    20
      7499 ALLEN      SALESMAN        7698 20-FEB-81       1600        300         30
      7521 WARD       SALESMAN        7698 22-FEB-81       1250        500         30
      7566 JONES      MANAGER         7839 02-APR-81       2975                    20
      7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400         30
      7698 BLAKE      MANAGER         7839 01-MAY-81       2850                    30
      7782 CLARK      MANAGER         7839 09-JUN-81       2450                    10
      7788 SCOTT      ANALYST         7566 19-APR-87       3000                    20
      7839 KING       PRESIDENT            17-NOV-81       5000                    10
      7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0         30
      7876 ADAMS      CLERK           7788 23-MAY-87       1100                    20
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7900 JAMES      CLERK           7698 03-DEC-81        950                    30
      7902 FORD       ANALYST         7566 03-DEC-81       3000                    20
      7934 MILLER     CLERK           7782 23-JAN-82       1300                    10
14 rows selected.
SQL>
SQL> select * from emp
2 where empno in ( select empno from v_emp);
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7369 SMITH      CLERK           7902 17-DEC-80        800                    20
      7499 ALLEN      SALESMAN        7698 20-FEB-81       1600        300         30
      7521 WARD       SALESMAN        7698 22-FEB-81       1250        500         30
      7566 JONES      MANAGER         7839 02-APR-81       2975                    20
      7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400         30
      7698 BLAKE      MANAGER         7839 01-MAY-81       2850                    30
      7782 CLARK      MANAGER         7839 09-JUN-81       2450                    10
      7788 SCOTT      ANALYST         7566 19-APR-87       3000                    20
      7839 KING       PRESIDENT            17-NOV-81       5000                    10
      7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0         30
      7876 ADAMS      CLERK           7788 23-MAY-87       1100                    20
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7900 JAMES      CLERK           7698 03-DEC-81        950                    30
      7902 FORD       ANALYST         7566 03-DEC-81       3000                    20
      7934 MILLER     CLERK           7782 23-JAN-82       1300                    10
14 rows selected.
SQL>

Problem with former email addresses appearing as options when addressing emails.

When I am typing in the name of the person I want to send an email to in Apple Mail version 3.6, all former addresses will appear for me to choose from, and before I know it I am sending emails to someone's old email address all the time.
How do you get rid of old email addresses so they won't appear as options when you are trying to send an email?
I'm using an older MacBook w/ OS X version 10.5.8, which I'm not sure if it makes a difference with my problem.
Help me, please!!!

Thx so much, Christopher. I am finding out that there are several ways to deal with this issue, and it seems like there's a few different things I need to do. I am finding some under different related questions, but yours was helpful, too.
I went to Windows > Previous Recepients
and sorted and removed old addresses from there
But I also needed to go to address book and found an incorrect address for the spouse of my recipient, so I needed your solution, too.
It was also suggested that I
Right click on the old mail address when it appears when starting a new mail message, then click
remove from previous recipents list
I'll be doing all of these as it comes up.
Thanks again! I'm new to this support community, and am impressed!

Problem with creating Operation with the BAPI_ROUTING_CREATE

I try to create a routing with operations attached to the default sequence with the BAPI_ROUTING_CREATE, via an external rfc-program.
I have no problems to transfer the Task Header und the MaterialTaskAllocation, but the transfer of the operation allways fails, without an error message. The system creates the Routing without any operation.
Are there some additional fields needed for the tranfer of an operation, in the online documentation there is only
the field OPERATION_ID defined as needed.
Thank's for any help
Jörg Sloksnaitis

I'll share my code snippet since I got this kind of working this morning. The following code with hard-coded values works and is a fairly simple and straightforward Routing. This may be something you can build on.
Task List Header
w_bapi1012_tsk_c-VALID_FROM = sy-datum.
w_bapi1012_tsk_c-VALID_TO_DATE = '99991231'.
w_bapi1012_tsk_c-PLANT = zzplant.
w_bapi1012_tsk_c-LOT_SIZE_FROM = '1'.
w_bapi1012_tsk_c-LOT_SIZE_TO = '99999999'.
w_bapi1012_tsk_c-TASK_MEASURE_UNIT = 'EA'.
w_bapi1012_tsk_c-TASK_LIST_STATUS = '4'.
w_bapi1012_tsk_c-TASK_LIST_USAGE = '1'.
append w_bapi1012_tsk_c to t_bapi1012_tsk_c.
Material Fields
w_bapi1012_MTK_C-material = zzmaterial.
w_bapi1012_mtk_c-plant = zzplant.
w_bapi1012_mtk_c-VALID_FROM = sy-datum.
w_bapi1012_mtk_c-VALID_TO_DATE = '99991231'.
append w_bapi1012_mtk_c to t_bapi1012_mtk_c.
Operation
w_bapi1012_opr_c-ACTIVITY = '9000'.
w_bapi1012_opr_c-CONTROL_KEY = 'RP02'.
w_bapi1012_opr_c-WORK_CNTR = ' '.
w_bapi1012_opr_c-PLANT = zzplant.
w_bapi1012_opr_c-DESCRIPTION = 'Test Operation'.
w_bapi1012_opr_c-BASE_QUANTITY = '1'.
w_bapi1012_opr_c-OPERATION_MEASURE_UNIT = 'EA'.
w_bapi1012_opr_c-VALID_FROM = sy-datum.
w_bapi1012_opr_c-VALID_TO_DATE = '99991231'.
w_bapi1012_opr_c-DENOMINATOR = '1'.
w_bapi1012_opr_c-NOMINATOR = '1'.
append w_bapi1012_opr_c to t_bapi1012_opr_c.
Thanks,
Tim Stadler
Menasha Corporation

Satellite A100 - problem with battery operation

Hi!
My notebook (I bought it 1.5 years ago) has a big problem when operating with battery.
First of all, with a fully charged battery, the notification for "limited battery status" pops up after 2 minutes of operation and after 5 minutes it goes to stand-by mode due to very low battery level.
Then, I plug it on the AC power and the LED for the battery remains yellow for about 15 minutes and then turns blue.
(The battery is OK, I have tested it on another Sat A100)
What can be the problem???
Thanks in advance!
Maria

Since You Have tested the battery in another Sat A100 the problem must be in your computer settings:
1>> START >> CONTROL PANEL>> SELECT POWER OPTIONS ICON
2>> You will now see a screen wich displays your power plans and note *one of them* has a tick i.e a small dot in a circle:
3>> BALANCED > POWER SAVER> HIGH PERFORMANCE
4>> UNDER THIS POWER PLAN > CLICK CHANGE PLAN SETTINGS> A SCREEN WILL BE DISPLAYED SHOWING YOUR PLAN!
5>> PROCEED TO >> *CLICK* WHERE IT SAYS CHANGE ADVANCED POWER SETTINGS
6>> IF YOU SCROLL THE BAR TO THE *+ SIGN >> BATTERY* CLICK THE *+ SIGN
7>> YOU SHOULD HAVE : You will have to have play with these settings or you could click restore plan defaults to see if this will solve your problem
Note clicking the *+ SIGN next to tany of these options below will allow you to change what event takes place on your computer.
+ CRITICAL BATTERY ACTION
+ LOW BATTERY LEVEL
+ CRITICAL BATTERY LEVEL
+ LOW BATTERY NOTIFICATION
+ LOW BATTERY ACTION

Problem with Amarok/Opera/Virtualbox appearance

Similar Messages

Maybe you are looking for