Problem with Amazigh chars in webkits

Hi all,
i post this question because i have see that all browser which use webkit dont does not correctly display the letters of the alphabet Amazigh (Tamazight Tifinagh gold == language of North African population),
i want to ask you if you can add our language to your webkit,
this just an example of our chars http://upload.wikimedia.org/wikipedia/commons/1/17/Tifinagh_in_Tifinagh.svg
Thank you,
Rafik BOUGHANI,

rboughani wrote:
You can created a some of keyboard with Tifinagh letter ?
You can do this with
http://scripts.sil.org/ukelele
I made one years ago, not sure if any good:
https://dl.dropboxusercontent.com/u/46870715/k/Tifinagh.keylayout
Also do a google search on "os x tifinagh keyboard"

Similar Messages

Problem with special chars in BLOB datatype using contains keyword

Facing problem, when part searching with special chars in BLOB datatype. It is considering the non alpha-numeric chars as a separtor in a provided string
EX:
SELECT *
FROM RESUME_TEST P,grst_candidate d
WHERE d.candidate_id = p.candidate_id
AND CONTAINS(P.CAND_RESUME,'%VB.NET%',1) > 0
Strings: , VB.NET , PL/SQL AS/400 , C etc..
Followed the below approaches
1) created a table:
Syntax: create table resume_Test(cand_id number(10),cand_resume blob);
2) inserted the values into this table upto 60,000
3) created a context index
3.1 created preferences
Syntax:
BEGIN
ctx_ddl.create_preference('try_lexer3','BASIC_LEXER');
ctx_ddl.set_attribute('try_lexer3','printjoins','-_~!@#$%^&*(){}[],=?\;|><.+');
END;
3.2 created context index
Syntax:
CREATE INDEX CANDRESUME_CTX_IDX ON resume_test (cand_resume)
INDEXTYPE IS CTXSYS.CONTEXT
PARAMETERS ('LEXER try_lexer3 memory 500M');
4) while executing this index, it is taking much time approx 6 hrs(plz explain why it is taking time)
5) Problems:
5.1 when searching with string(VB.NET , PL/SQL AS/400 , C etc..) it is considering the special char as a separator
5.2 used escape char (\) also, but no effect
5.3 when searching with single char, it is giving error (ORA-29902,ORA-20000,DRG-51030)
5.4 getting the above error with wild card chars (& ,_, (),{},[])
So, please explain the clear scenarios, why am getting this error , and how to get the proper results.

Have you tried adding the / char to the printjoin characters?
Indexing can take a lot of time, depending on the amount of data and your machine's power. You could try to parallelize the index creation and / or assign more memory
CREATE INDEX CANDRESUME_CTX_IDX ON resume_test (cand_resume)
INDEXTYPE IS CTXSYS.CONTEXT
PARAMETERS ('LEXER try_lexer3 memory 2000M') PARALLEL 8;

BeX Variable:Strange problem with InfoObject CHAR 60

Hi everybody,
I've created an infobject custom (lenght:60 char).
In Bex I've created a variable (type select option) but when I choose a value of 60 char from match code, it's truncated and I obtain an error message (BRAIN 643) because this value isn't in master data table.
Thanks in advance.

Hi Riccardo,
unfortunately the problem hasn't solution on BEX side.
Here full answer from SAP:
Hello,
We analyzed the issue on our testsystem and found out that it is
not possible to enter more than 45 characters in the selection screen inBEX analyser.
Even though the length may be defined as 60 characters, it takes only
the first 45 characters and truncates the remaining
characters.
Similar thing happens when we run the query and try to retrieve the
variable value. Now when we select a value which is greater
than 45 characters, it truncates the extra characters and then fills
the text box for that variable with truncated value.
But now that we do not have this value in the master data table
it generates the error message.
Even if you try to copy and paste the value in the variable pop up
screen it truncates it to 45 characters.
Please note that this would happen only when you run the query in
BEX Analyser(as in this case screens are rendered by basis) and not WEB.To verify this you can run the same scenerio in WEB (HTML) mode and see
that it works fine because in this case screens are rendered in BW
which can have length greater than 45 characters.
So I would suggest you to run such queries (which has variable values
exceeding 45 characters)in HTML and not Bex analyser,or refrain from
using values exceeding 45 characters.
As we spoke to our development, this would not be fixed in future support packages.
Therefore,I would suggest you to either use characteristic values upto a maximum of 45 characters or use WEB/HTML to run queries with suchscenerio.
I hope this resolves the issue.
Thanks for your understanding and cooperation and I´m sorry that I can´t give you a better answer.

SLM2048 - Password problems with special chars

Hi all,
We´ve got a SLM2048 in use (most current FW) and I wanted to apply our new password standards onto that switch. So I changed the password of the user admin and used special chars, which were =&!= and clicked update and save changes. I now know, that I should have been using only alphanumerical characters, but why is there no routine that checks the PW for conformance, before writing it onto the switch.
Problem now is, that I am unable to login and don´t want to do a hard reset, because the configuration would be lost. I know there should have been a rescue admin user, but there is none. What can I do now? Any chance that a cisco engineer could get in contact with me to debug the entered password in the lab and who could then tell me what was saved to ROM or how I can login again?
Thanks,
Philip

If your switch has a console port, you can try this:
http://www.opendreams.net/jesse/doc/linksys_srw_switch_password_recovery.txt
http://www.cisco.com/en/US/products/ps9967/products_qanda_item09186a0080a36735.shtml
HTH,
Andrew Lissitz

Problem with ASCII char (127-'\u0080') while printing

Hello,
I am working with socket and want to send some data over the network. I am using Strings for sending data over the socket. In few characters ('\u007F' to '\u009F') I am getting error. Whenever I try to execute this line, I got an error
System.out.println ( '\u0080') -> It is printed as '?' = '\u003F'.
I try to send this character (String) over the network through Client Socket\
Socket ClientSocket = new Socket("192.168.243.10", "6010");out = new PrintWriter(ClientSocket.getOutputStream(), true);
out.println('\u0080') ;
out.close() ;
ClientSocket.close();It is received with same '\u003F' ='?' at the receiving end (192.168.243.10). While rest all characterset is receiving & printing accurately. Any Comments on it?
Shozi

You are using a Writer to send those chars, which
means it will attempt to encode them into bytes. But
since those bytes you mentioned are not defined in
ASCII (or in UTF-8859-1 for that matter) then the
charset converter encodes them as "?".
Can you explain why you are using Strings when it
appears you need to send untranslated bytes?I am following a pattern of bits to identify data elements present in message string.
I am writing a chat Client & Server. While sending message to chat clients, I need to tell whether private window request, or main channel request or notification (will display in both private window & main window). In this way, I have 32 combination of options that can be present in my message, so I am using 4 chars (32 bits) to figure out which option is present or which message element is present in the received message. So, I am using bitmap pattern to identify data elements in my message. For this I am using bits of a char (lower 8 bits). This will help me in identifying the characters present in the message. I have specific range of characters that aren't interpreted correctly. '\u007F' to '\u009F' while rest are working absolutely fine with me. Why these characters aren't working? This is what I am trying to figure out.
Hope I clarifies the situation.

Problem with Activating char InfoObject

Hi ,
Due to one transport One InfoObject(Master Data) is Inactivated in quality. I tried to activate this InfoObject manually and by using RSDG_IOBJ_ACTIVATE function module. But it is not activating & I am getting the error message like
1. Master data table is contains data
2. SID table is containing the data
So please let me know with out deleting the above data how can I activate that Infoobject.

Hi,
basically, this happens if a object has been deleted from the attributes or the data type has changed or the field length was decreased and the object contains data in the target system. So follow Eugene's instruction. Compare the objects. Another option might be the deletion of the master data of the object. But this is only possible if the data of all dataproviders that contain the object will be deleted too.
regards
Siggi

Problems with the richTextEditor and quotes

Hello
I'm having problems with quote chars and the richText
control's htmlText. When users enter quotes into the richTextEditor
control. The quotes breaks the HTML text, meaning it's no longer
well formatted. Is there an escape char that I need to use. Or do I
need to force some kind of refresh on the control prior to using
the htmlText string?

I have been using RTE in a content management system and
found a need to replace non-standard quote characters with proper
UTF-8 character counterparts. Curly quotes in particular are
problematic. Use a replace function to substitute non-standard for
standard characters.

Error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT

error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT nfs sharing

Never mind, I already found the solution myself.
What I did wrong was:
- not copying the master image to the nbi folder
- selecting the netinstall-restore.dmg image as source to copy to my HD.
The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder.

BI 7 Upgrade - Problem with Authorisation Variable on Compounded Char

Dear All,
We have just upgraded our DEV environment from 3.5 to BI7 and have encountered a weird problem with 1 of our authorization variables.
Our authorization check variable checks the values from a table that the users are allowed to use (which includes the selection screen). There are 2 variables 1 for the uncompounded char and 1 for the compounded char, the uncompounded variable is working just fine but not the other. When the user tries to pick a value, they are presented with not just their restricted list but ALL the values.
Can anyone explain this? Has BI 7 changes the way authorizations work with Compounded Characteristics ?
Before anyone asks, these variables work just fine on 3.5 and are working just fine in our QA and PRD environments.
Help required urgently.
Thanks
Craig

Hi,
Yes authorisations in BI 7.0 are a bit different from the ones in BW 3.5. Here is the link which will help you know every thing in BI 7.0
bw 7.0
Regards,
Habeeb
Assign points if helpful.

[SOLVED!] On USB drives, problems with non-English chars and HAL

Hello,
I am having a problem with non-English caracters (áãàçéẽê...) on files stored on my USB drive.
On Windows they're created with the correct name. But on Linux the files have the non-English characteres replaced by '?' and are not accessible.
If I manuallly mount the drives using 'mount -o iocharset=utf8 /dev/sdb1 /media/usbdisk' the characters are OK, so I think I just need to get HAL to pass the correct parameters to mount. However I don't know how to do that, and haven't found any good solution.
I tried to build a custom kernel setting the default charset as UTF-8 and it didn't work.
Any ideas? I'm using x86-64, HAL 0.5.13-3 and my locale is pt-BR.UTF-8.
Thanks!
EDIT: Actually, this is not a HAL problem, but a problem with 'exo'. For the solution, I edited /etc/xdg/xfce4/mount.rc and added iocharset=utf8 to the [vfat] category.
Last edited by Renan Birck (2009-11-28 20:54:23)

I don't use Thunar presently, but I looked in the Thunar Volume Manager doc and I didn't find anything to change the mount options of removable drives. I am not quite sure if it's possible or not. Maybe someone using it can tell for sure.
But if it is not possible to change the mount options, a possible solution is to disable the Thunar Volume Manager plugin and to use something else more configurable to manage the automount function.
Personally I use the halevt package from AUR which uses configuration files in the xml format.
It's not so easy to use but is highly configurable.
But there exists other tools also.
I can help you with halevt if you choose that way...

Problem with Call Library Function. Want to pass a string and return a string, but my compiler does not recognize "CStr" and Labview does not recognize my "char *function()" callout

Hi, I'm trying to use a .DLL I wrote in Visual C++ .NET. The Call Library Function generates a function prototype of "CStr Parser(CStr arg_raw)"
but my compiler won't accept this. So I change it to how C normally deals with strings "char *Parser(char *arg_raw). Now the Call Librafy Function does not find "Parser" in my .DLL though it is definitely there!
Help!
-Fong

Hello
You will need to include extcode.h in your C file. You can find this under ..\LabVIEW\cintools folder.
The include has all the defines you will need.
Bilal Durrani
NI
Bilal Durrani
NI

Advance level drawing problem with Jframe and JPanel need optimize sol?

Dear Experts,
I m trying to create a GUI for puzzle game following some kind of "game GUI template", but i have problems in that,so i tried to implement that in various ways after looking on internet and discussions about drawing gui in swing, but i have problem with both of these, may be i m doing some silly mistake, which is still out of my consideration. please have a look at these two and recommend me one of them, which is running without problems (flickring and when you enlarge window the board draw copies (tiled) everywhere,
Note: i don't want to inherit jpanel or Jframe
here is my code : import java.awt.BorderLayout;
public class GameMain extends JFrame {
     private static final long serialVersionUID = 1L;
     public int mX, mY;
     int localpoints = 0;
     protected static JTextField[][] squares;
     protected JLabel statusLabel = new JLabel("jugno");
     Label lbl_score = new Label("score");
     Label lbl_scorelocal = new Label("local score");
     protected static TTTService remoteTTTBoard;
     // Define constants for the game
     static final int CANVAS_WIDTH = 800; // width and height of the game screen
     static final int CANVAS_HEIGHT = 600;
     static final int UPDATE_RATE = 4; // number of game update per second
     static State state; // current state of the game
     private int mState;
     // Handle for the custom drawing panel
     private GameCanvas canvas;
     // Constructor to initialize the UI components and game objects
     public GameMain() {
          // Initialize the game objects
          gameInit();
          // UI components
          canvas = new GameCanvas();
          canvas.setPreferredSize(new Dimension(CANVAS_WIDTH, CANVAS_HEIGHT));
          this.setContentPane(canvas);
          this.setDefaultCloseOperation(EXIT_ON_CLOSE);
          this.pack();
          this.setTitle("MY GAME");
          this.setVisible(true);
     public void gameInit() {
     // Shutdown the game, clean up code that runs only once.
     public void gameShutdown() {
     // To start and re-start the game.
     public void gameStart() {
     private void gameLoop() {
     public void keyPressed(KeyEvent e) {
     public void keyTyped(KeyEvent e) {
     public void gameKeyReleased(KeyEvent e) {
          PuzzleBoard bd = getBoard();
          for (int row = 0; row < 4; ++row) {
               for (int col = 0; col < 4; ++col) {
                    if (e.getSource() == squares[row][col]) {
                         if (bd.isOpen(col, row)) {
                              lbl_score.setText("Highest Score = "
                                        + Integer.toString(bd.getPoints()));
                              setStatus1(bd);
                              pickSquare1(col, row, squares[row][col].getText()
                                        .charAt(0));
     protected void pickSquare1(int col, int row, char c) {
          try {
               remoteTTTBoard.pick(col, row, c);
          } catch (RemoteException e) {
               System.out.println("Exception: " + e.getMessage());
               e.printStackTrace();
               System.exit(1);
     // method "called" by remote object to update the state of the game
     public void updateBoard(PuzzleBoard new_board) throws RemoteException {
          String s1;
          for (int row = 0; row < 4; ++row) {
               for (int col = 0; col < 4; ++col) {
                    squares[row][col].setText(new_board.ownerStr(col, row));
          lbl_score.setText("Highest Score = "
                    + Integer.toString(new_board.getPoints()));
          setStatus1(new_board);
     protected void setStatus1(PuzzleBoard bd) {
          boolean locals = bd.getHave_winner();
          System.out.println("local win" + locals);
          if (locals == true) {
               localpoints++;
               System.out.println("in condition " + locals);
               lbl_scorelocal.setText("Your Score = " + localpoints);
          lbl_score
                    .setText("Highest Score = " + Integer.toString(bd.getPoints()));
     protected PuzzleBoard getBoard() {
          PuzzleBoard res = null;
          try {
               res = remoteTTTBoard.getState();
          } catch (RemoteException e) {
               System.out.println("Exception: " + e.getMessage());
               e.printStackTrace();
               System.exit(1);
          return res;
     /** Custom drawing panel (designed as an inner class). */
     class GameCanvas extends JPanel implements KeyListener {
          /** Custom drawing codes */
          @Override
          public void paintComponent(Graphics g) {
               // setOpaque(false);
               super.paintComponent(g);
               // main box; everything placed in this
               // JPanel box = new JPanel();
               setLayout(new BoxLayout(this, BoxLayout.Y_AXIS));
               // add(statusLabel, BorderLayout.NORTH);
               // set up the x's and o's
               JPanel xs_and_os = new JPanel();
               xs_and_os.setLayout(new GridLayout(5, 5, 0, 0));
               squares = new JTextField[5][5];
               for (int row = 0; row < 5; ++row) {
                    for (int col = 0; col < 5; ++col) {
                         squares[row][col] = new JTextField(1);
                         squares[row][col].addKeyListener(this);
                         if ((row == 0 && col == 1) || (row == 2 && col == 3)
                         || (row == 1 && col == 4) || (row == 4 && col == 4)
                                   || (row == 4 && col == 0))
                              JPanel p = new JPanel(new BorderLayout());
                              JLabel label;
                              if (row == 0 && col == 1) {
                                   label = new JLabel("1");
                                   label.setHorizontalAlignment(JLabel.LEFT);
                                   label.setVerticalAlignment(JLabel.TOP);
                              else if (row == 4 && col == 0) {// for two numbers or
                                   // two
                                   // blank box in on row
                                   label = new JLabel("2");
                                   label.setHorizontalAlignment(JLabel.LEFT);
                                   label.setVerticalAlignment(JLabel.TOP);
                              else if (row == 1 && col == 4) {
                                   label = new JLabel("3");
                                   label.setHorizontalAlignment(JLabel.LEFT);
                                   label.setVerticalAlignment(JLabel.TOP);
                              else if (row == 4) {
                                   label = new JLabel("4");
                                   label.setHorizontalAlignment(JLabel.LEFT);
                                   label.setVerticalAlignment(JLabel.TOP);
                              else {
                                   label = new JLabel("5");
                                   label.setHorizontalAlignment(JLabel.LEFT);
                                   label.setVerticalAlignment(JLabel.TOP);
                              label.setOpaque(true);
                              label.setBackground(squares[row][col].getBackground());
                              label.setPreferredSize(new Dimension(label
                                        .getPreferredSize().width, squares[row][col]
                                        .getPreferredSize().height));
                              p.setBorder(squares[row][col].getBorder());
                              squares[row][col].setBorder(null);
                              p.add(label, BorderLayout.WEST);
                              p.add(squares[row][col], BorderLayout.CENTER);
                              xs_and_os.add(p);
                         } else if ((row == 2 && col == 1) || (row == 1 && col == 2)
                                   || (row == 3 && col == 3) || (row == 0 && col == 3)) {
                              xs_and_os.add(squares[row][col]);
                              // board[ row ][ col ].setEditable(false);
                              // board[ row ][ col ].setText("");
                              squares[row][col].setBackground(Color.RED);
                              squares[row][col].addKeyListener(this);
                         } else {
                              squares[row][col] = new JTextField(1);
                              // squares[row][col].addActionListener(this);
                              squares[row][col].addKeyListener(this);
                              xs_and_os.add(squares[row][col]);
               this.add(xs_and_os);
               this.add(statusLabel);
               this.add(lbl_score);
               this.add(lbl_scorelocal);
          public void keyPressed(KeyEvent e) {
          public void keyReleased(KeyEvent e) {
               gameKeyReleased(e);
          public void keyTyped(KeyEvent e) {
     // main
     public static void main(String[] args) {
          SwingUtilities.invokeLater(new Runnable() {
               @Override
               public void run() {
                    new GameMain();
thanks a lot for your time , consideration and efforts.
jibby
Edited by: jibbylala on Sep 20, 2010 6:06 PM

jibbylala wrote:
thanks for mentioning as i wasn't able to write complete context here.Yep thanks camickr. I think that Darryl's succinct reply applies here as well.

Problem with htmldb 2 (Sorry APEX)!

I installed htmldb 2 on a windows XP, Oracle 10gR1 (which has enhanced by companion CD downloaded form Oracle's site). Everything went OK but when I want to connect to it by this url: http://localhost:7777/pls/htmldb it takes my username,pass but says:
"Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Oracle-HTTP-Server/1.3.28 Server at localhost Port 7777"
I noticed many differences between my installed Apache and documents of htmldb. I run a 9.0.4.0.0 Apache server and the dads.conf and httpd.conf are as following:
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
<Location /pls/htmldb>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDatabasePassword @BI+fAonVS+7xU8G04irVINWznM6s+A9fuQ==
PlsqlDatabaseConnectString chagh
PlsqlDefaultPage htmldb
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
</Location>
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/srm.conf and then E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "E:\oracle\product\10.1.0\Companion\Apache\Apache" will be interpreted by the
# server as "E:\oracle\product\10.1.0\Companion\Apache\Apache/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do NOT add a slash at the end of the directory path.
ServerRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile logs/httpd.scoreboard
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# SendBufferSize: controls setsockopt() call made to set send buffer size on
# all sockets. Default OS value on most Windows platforms is too small.
# Larger values can help if the average page size served by OHS is
# large (~64 k)
SendBufferSize 16384
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Apache on Win32 always creates one child process to handle requests. If it
# dies, another child process is created automatically. Within the child
# process multiple threads handle incoming requests. The next two
# directives control the behaviour of the threads and processes.
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For Win32, set this value to zero (unlimited)
# unless advised otherwise.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 0
# Number of concurrent threads (i.e., requests) the server will allow.
# Set this value according to the responsiveness of the server (more
# requests active at once means they're all handled more slowly) and
# the amount of system resources you'll allow the server to consume.
ThreadsPerChild 50
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
#MinSpareServers 5
#MaxSpareServers 20
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#MaxClients 150
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `apache -l' for the list of already
# built-in (statically linked and thus always available) modules in your Apache
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.dll
LoadModule mime_magic_module      modules/ApacheModuleMimeMagic.dll
LoadModule mime_module          modules/ApacheModuleMime.dll
LoadModule dbm_auth_module     modules/ApacheModuleAuthDBM.dll
LoadModule digest_auth_module     modules/ApacheModuleAuthDigest.dll
LoadModule anon_auth_module      modules/ApacheModuleAuthAnon.dll
LoadModule cern_meta_module      modules/ApacheModuleCERNMeta.dll
LoadModule digest_module      modules/ApacheModuleDigest.dll
LoadModule expires_module      modules/ApacheModuleExpires.dll
LoadModule headers_module      modules/ApacheModuleHeaders.dll
LoadModule proxy_module      modules/ApacheModuleProxy.dll
LoadModule speling_module      modules/ApacheModuleSpeling.dll
LoadModule status_module      modules/ApacheModuleStatus.dll
LoadModule info_module          modules/ApacheModuleInfo.dll
LoadModule usertrack_module      modules/ApacheModuleUserTrack.dll
LoadModule vhost_alias_module     modules/ApacheModuleVhostAlias.dll
LoadModule agent_log_module     modules/ApacheModuleLogAgent.dll
LoadModule referer_log_module     modules/ApacheModuleLogReferer.dll
LoadModule perl_module      modules/ApacheModulePerl.DLL
LoadModule fastcgi_module      modules/ApacheModuleFastCGI.dll
LoadModule onsint_module      modules/ApacheModuleOnsint.dll
LoadModule wchandshake_module     modules/ApacheModuleWchandshake.dll
ClearModuleList
AddModule mod_so.c
AddModule mod_onsint.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_negotiation.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_setenvif.c
AddModule mod_isapi.c
AddModule mod_vhost_alias.c
AddModule mod_log_referer.c
AddModule mod_log_agent.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_auth_digest.c
AddModule mod_cern_meta.c
AddModule mod_digest.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_proxy.c
AddModule mod_speling.c
AddModule mod_info.c
AddModule mod_status.c
AddModule mod_usertrack.c
AddModule mod_perl.c
AddModule mod_fastcgi.c
AddModule mod_wchandshake.c
<IfDefine SSL>
LoadModule ossl_module      modules/ApacheModuleOSSL.DLL
</IfDefine>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# Port: The port to which the standalone server listens. Certain firewall
# products must be configured before Apache can listen to a specific port.
# Other running httpd servers will also interfere with this port. Disable
# all firewall, security, and other services if you encounter problems.
# To help diagnose problems use the Windows NT command NETSTAT -a
Port 7777
Listen 7777
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
ServerName localhost
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
# Under Win32, we do not currently try to determine the home directory of
# a Windows login, so a format such as that below needs to be used. See
# the UserDir documentation for details.
<IfModule mod_userdir.c>
     UserDir "E:\oracle\product\10.1.0\Companion\Apache\Apache\users\"
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig conf/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# Alternate "common" format to use when fronted by webcache:
# LogFormat "%{ClientIP}i %l %u %t \"%r\" %>s %b %h" common_webcache
# When webcache is forwarding requests to OHS, %h becomes the IP of
# the originating webcache server and the real client IP is stored
# in the ClientIP header. The common_webcache format can be used
# in place of the common format when using webcache but with one
# important caveat: if clients are capable of bypassing webcache
# then it is possible to spoof the client IP by manually setting
# the ClientIP header so the %h field should be monitored in such
# an environment. Another alternative to specifying the ClientIP
# header directly in a LogFormat is to use the "UseWebCacheIp"
# directive:
# UseWebCacheIp On
# When this is specified, %h is derived internally from the ClientIP
# header and the access log format does not need to be modified.
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/access_log 43200" common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script. For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:
#!c:/program files/perl/perl
# Note you mustnot_ indent the actual shebang line, and it must be the
# first line of the file. Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention. The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#ScriptInterpreterSource registry
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/"..
Alias /jservdocs/ "E:\oracle\product\10.1.0\Companion\Apache\Jserv\docs/"
Alias /javacachedocs/ "E:\oracle\product\10.1.0\Companion\javacache\javadoc/"
Alias /icons/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\icons/"
Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
<Directory "icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<IfModule mod_perl.c>
     Alias /perl/ "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin/"
</IfModule>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin/"
# "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
# Note, add the option TrackModified to the IndexOptions default list only
# if all indexed directories reside on NTFS volumes. The TrackModified flag
# will report the Last-Modified date to assist caches and proxies to properly
# track directory changes, but it does not work on FAT volumes.
IndexOptions FancyIndexing
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
# If MultiViews are amongst the Options in effect, the server will
# first look for name.html and include it if found. If name.html
# doesn't exist, the server will then look for name.txt and include
# it as plaintext if found.
ReadmeName README
HeaderName HEADER
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbriviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage ar .ar
AddLanguage da .dk .da
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fi .fi
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage es .es_ES .es
AddLanguage he .he .iw
AddLanguage hu .hu
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage ko .ko
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt_BR .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage sk .sk
AddLanguage sv .sv
AddLanguage th .th
AddLanguage tr .tr
AddLanguage cz .cz .cs
AddLanguage ro .ro
AddLanguage ru .ru
AddLanguage zh-cn .zh_CN
AddLanguage zh-tw .zh_TW
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
# For example, the PHP 3.x module (not part of the Apache distribution - see
# http://www.php.net) will typically use:
#AddType application/x-httpd-php3 .php3
#AddType application/x-httpd-php3-source .phps
# And for PHP 4.x, use:
#AddType application/x-httpd-php .php
#AddType application/x-httpd-php-source .phps
AddType application/x-tar .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
AddType text/xml xbl
AddType text/x-component htc
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a_domain.com another_domain.edu joes.garage_sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *>
# ServerAdmin [email protected]
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
#<VirtualHost default:*>
#</VirtualHost>
SetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
<IfModule mod_perl.c>
# Perl Directives
# PerlWarn On
# PerlFreshRestart On
# PerlSetEnv PERL5OPT Tw
# PerlSetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
PerlModule Apache
# PerlModule Apache::Status
PerlModule Apache::Registry
# PerlModule Apache::CGI
# PerlModule Apache::DBI
# PerlRequire
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
AddHandler perl-script .pl
Options +ExecCGI
PerlSendHeader On
</Location>
# <Location /perl-status>
# SetHandler perl-script
# PerlHandler Apache::Status
# order deny,allow
# deny from all
# allow from localhost
# </Location>
</IfModule>
#Protect WEB-INF directory
<DirectoryMatch /WEB-INF/>
Order deny,allow
Deny from all
</DirectoryMatch>
# Setup of FastCGI module
<IfModule mod_fastcgi.c>
Alias /fastcgi/ "E:\oracle\product\10.1.0\Companion\Apache\fastcgi/"
ScriptAlias /fcgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin/"
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin">
     AllowOverride None
     Options None
     Order allow,deny
     Allow from all
     SetHandler fastcgi-script
     <IfModule mod_ossl.c>
     SSLOptions +StdEnvVars
     </IfModule>
</Directory>
</IfModule>
# Include the configuration for Apache JServ 1.1
#include "E:\oracle\product\10.1.0\Companion\Apache\Jserv\conf\jserv.conf"
# Setup of oprocmgr module.
# This directive identifies each remote apache instance that will be
# sending requests to processes (e.g., JServs), managed by local Apache
# instances. This directive is used by the local process manager to share
# routing information with remote apache instances via non-SSL HTTP messages.
# The directive is repeated for each remote apache instance that will be
# sending requests. The ProcNode directive that refers to the local apache
# instance will be ignored, but may be supplied to facilitate uniformity
# in configuration across apache instances. Arguments to the ProcNode must
# be sufficient to reach the remote instance of apache via non-SSL HTTP
# messages. It is not considered an error if the remote apache instance is
# unreachable, as no assumption is made about the starting order or
# availability of apache instances.
# Syntax: ProcNode <hostname> <port>
# Example: ProcNode abc.com 7777
<IfModule mod_oprocmgr.c>
<Location /oprocmgr-service>
SetHandler oprocmgr-service
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
<Location /oprocmgr-status>
SetHandler oprocmgr-status
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
</IfModule>
# Include the mod_oc4j configuration file
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_oc4j.conf"
# Include the mod_dms configuration file
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\dms.conf"
# Loading rewrite_module here so it loads before mod_oc4j
LoadModule rewrite_module      modules/ApacheModuleRewrite.dll
# Include the SSL definitions and Virtual Host container
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\ssl.conf"
# Include the mod_osso configuration file
#include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_osso.conf"
# Include the Oracle configuration file for custom settings
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\oracle_apache.conf"
------------------------------------------------------------------------------------------------------------------

Firstly, there's no such thing as Apache 9.3, there's Apache 1 (and subversions) and Apache 2 (and subversions). Your error message -
Oracle-HTTP-Server/1.3.28Shows you're using Apache 1.3.28
Secondly, I'm confused by your comment -
I do not have Apache 9.3 or higher but I think oracle should offer this in its companion CDOracle does offer the Apache server, if you're saying you didn't get it from Oracle then where did your Apache server come from?
Thirdly, I notice from your config file -
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"That you're piping the logs through rotatelogs, are you sure the logfiles haven't just been renamed?

Problem with sqlloader and rtrim in direct path

Im trying to load near 40 Gb of information to Oracle 9i (9.2.0.6.0) so to acelerate the load we are using direct=true but we are having problems with table where we need to aply sql funtions. Like an example check this control file please:
LOAD DATA
INFILE 'PSACTIVIMG.dat' "str '~~~~~'"
BADFILE 'PSACTIVIMG.bad'
DISCARDFILE 'PSACTIVIMG.dsc'
INTO TABLE PSACTIVIMG
TRAILING NULLCOLS (
ACTIVITYNAME CHAR terminated by '@@#' "NVL(RTRIM(:ACTIVITYNAME),:ACTIVITYNAME)",
SEQNO terminated by '@@#',
PSIMAGEVER terminated by '@@#',
IMGSEG RAW(65536))
When we try to run it with direct=true we are getting:
SQL*Loader-961: Error calling once/load finishing for table PSACTIVIMG
ORA-26090: row is in partial state
SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
But in alert.log we are getting:
ORA-00600: internal error code, arguments: [klafre_30], [0], [], [], [], [], [], []
ORA-01403: no data found
If i remove the rtrim function or i use conventional path the data its loades correctly. Any body have any suggestion about this problem?
thanks in advance.
Alejandro Amador.

Could you use an external table and insert as select with the /*+ append */ hint?

Problem with data not displaying in website

Hello All,
I am having a problem with one of our applications. It is written in ColdFusion and uses SQL server. The problem that we are having is when we use the URL Http://bma.com (that is not actually the site name) we cannot see all the data that it is suppose to pull in. I get an error on page and when I select to view the error this is what I get
Message: 'WddxRecordset' is undefined Line: 184 Char: 2 Code: 0 URI: http://bma.com/user_maintenance.cfm and Message: 'jsusersTLV' is undefined Line: 3208 Char: 6 Code: 0 URI: http://bma.com/user_maintenance.cfm
If I put the IP address in the URL for example http://165.83.109.246/bma/login.cfm all of the data is displayed as it should.
Any thoughts or sugguestios on how to correct this?
Thanks

Yes, the user_maintenance.cfm is one of the forms that the data is not displaying on. There are multiple forms in the application and that just happens to be one of them. the login.cfm is just the login screen. Once you select your name and enter your password to the application then you can select the user maintenance form. If you select someones name the application should pull in all of that persons information. That is the problem, it is not pulling in any information on the user. We get a blank screen where data should be. When we use the IP address in the URL and select someones name in the user manintenance form, it pulls in all the data from that user as it should.

Problem with Amazigh chars in webkits

Similar Messages

Maybe you are looking for