Problem with an image load

i have a little problem here.. I have an awt.Choice, when i pick one of the options, in a JPanel bellow, appears a bidimentional array of JButtons (JButtons[][]) all with ImageIcons, and they all together makes one image... the problem is that the image appears cuted and incomplited, but if i minimize and restore the window, it fully appears.. in other words the image is there, but it doesn't shows rigth.. haw can i avoid this.. thanks...

Make each of those areas into TWO images: A B&W one, and
a COLOR one. Just
do a simple image swap.
You can see something similar on this page layer's menu -
http://www.madisonconcrete.com/testing/page.html
Those are just image swaps.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"cjallen1" <[email protected]> wrote in
message
news:e73fos$ee3$[email protected]..
> Can anyone help me with this problem !!
>
> I want the page to load with an image (that includes the
navigation menu)
> in
> black and white but when the mouse rollovers the
sections of the site i
> want
> that particular menu selection to become colour
>
> I hope i explained it well enough
>
> 1. Black and white image
> 2. User selects option on image (Hotspot??)
> 3. Only that part of the image (hotspot area) changes to
the image of that
> area in colour
>

Similar Messages

Problem with LILO to loading the OS

Hello everyone.
We have a problem with LILO to loading the OS in a CS-MARS 110R, find attached a screenshot.
The only solution is recovery the MARS Operating System.
Thanks in advance.
Regards
Antonio

Hi Matthew.
The re-image was impossible because this CS-MARS didn´t read the DVD correctly (hardware error) and we asked to Cisco a RMA.
Thanks
Antonio

Problems with importing images into Lightroom cc

Problems with importing images into Lightroom cc
I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
Now I have left lightroom 5 and where the input port works fine.
What happened to the upgrade from Lightroom 5 to lightroom cc?
The camera has the latest software.

I've now tested in various ways.
First, I have images on both memory cards in the camera.
Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
I turn the camera off after a while and get the next meddelnade (picture 1)
Which can be translated:
"The following files were not imported because they could not read (351)
Property 1-100
etc. "
Picture 1.
Picture 2

Problem with Gif image

Having a problem with gif image not showing up. It will show up in netscape6.2, but not in IE 5.0. Both are using the java 1.4 plugin. They are basic buttons (zoom in, zoom out, etc) and they actions work, just the icons aren't showing. Any help would be great! Below is a snip of code:
JPanel toolBarsPanel = new JPanel();
javax.swing.JToolBar toolbar = new javax.swing.JToolBar();
JButton zoomin = new JButton(new ImageIcon("tut/zoomin.gif"));
JButton fullext = new JButton(new ImageIcon("tut/fullextent.gif"));
JButton identify = new JButton(new ImageIcon("tut/identify.gif"));
JButton btn = new JButton(new ImageIcon("tut/addtheme.gif"));
toolbar.add(zoomin);
toolbar.add(fullext);
toolbar.add(identify);
toolbar.add(btn);
add(toolbar, BorderLayout.NORTH);
Thanks again for any help!

I used to do a lot of work in this sort of thing. After a while we were able to convince our bosses to use generated HTML (JSPs, etc.), so the problem moved to porting JavaScript to different platforms! (Platforms in this context means the different browser/OS combinations, etc.).
The only two things I can recommend are:
- complete control over you code. You will have to fix it! (Tried you apps on a Mac yet?)
- assume a minimal install. Don't assume users are going to have any fancy tools installed on their PC, unless you are developing an Intranet app, where you know the spec of the machines that are going to be using it.
As regarding getting IE to use a relative address, I don't think you are going to have any luck their, I'm afraid! (Although I am curious. It has been some time, but I though it did use relative addresses. Are you absolutely sure about this, did you check this out with System.outs and that?
HTH,
Manuel Amago.

Problem with module lazy loading in flex 3

Hi every body!
I have some problems with Module lazy loading. I am using flex 3.5, Module-flex3-0.14, parsley 3.2.
I can't get the LazyModuleLoadPolicy working correctly.
In my main application (the one that loads the modules), my parsley context is the following:
        <cairngorm:LazyModuleLoadPolicy objectId="lazyLoadPolicy" type="{ OpenViewMessage }" />
     <cairngorm:ModuleMessageInterceptor type="{ OpenViewMessage }"/>
     <cairngorm:ParsleyModuleDescriptor objectId="test"
          url="TestModule.swf"
          applicationDomain="{ClassInfo.currentDomain}"
     />
And to load my module:
[Inject(id="test")]
[Bindable] public var test:IModuleManager;
<core:LazyModulePod
     id="moduleLoader"
     moduleManager="{test}"
     moduleId="testModule"
/>
with LazyModulePod.mxml:
<mx:Canvas
    xmlns:mx="http://www.adobe.com/2006/mxml"
    xmlns:module="com.adobe.cairngorm.module.*"
    xmlns:parsley="http://www.spicefactory.org/parsley">
    <mx:Script>
        <![CDATA[
            import com.adobe.cairngorm.module.ILoadPolicy;
            import com.adobe.cairngorm.module.IModuleManager;
            [Bindable]
            public var moduleId:String;
            [Bindable]
            public var moduleManager:IModuleManager;
            [Bindable]
            [Inject(id="lazyLoadPolicy")]
            public var lazyLoadPolicy:ILoadPolicy;
        ]]>
    </mx:Script>
    <parsley:Configure/>
    <module:ViewLoader id="moduleLoader"
        moduleId="{ moduleId }"
        moduleManager="{ moduleManager }"
        loadPolicy="{lazyLoadPolicy}">
         
    </module:ViewLoader>
</mx:Canvas>
OpenViewMessage.as in a swc:
public class OpenViewMessage
        private var _moduleId:String;
        private var _viewId:String;
        public function OpenViewMessage(moduleId:String, viewId:String)
            this._moduleId = moduleId;
            this._viewId = viewId;
        public function get viewId():String{
            return _viewId;
        [ModuleId]
        public function get moduleId():String
            return _moduleId;
In another flex project, my module context is:
<mx:Object
     xmlns:mx="http://www.adobe.com/2006/mxml"
     xmlns:controler="com.cegedim.myit.controler.*">
     <controler:WindowControler/>
</mx:Object>
The module implements IParsleyModule
<mx:Module xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical"
     implements="com.adobe.cairngorm.module.IParsleyModule"
     xmlns:spicefactory="http://www.spicefactory.org/parsley">
     <mx:Script>
          <![CDATA[
               import org.spicefactory.parsley.flex.FlexContextBuilder;
               import com.adobe.cairngorm.module.IParsleyModule;
               public function get contextBuilder():ContextBuilderTag
                return contextBuilderTag;
          ]]>
     </mx:Script>
     <spicefactory:ContextBuilder id="contextBuilderTag" config="{ MyITTestModuleContext }"/>
     <spicefactory:Configure/>
</mx:Module>
and the WindowControler:
public class WindowControler
     public function WindowControler(){}
     [Init]
        public function initialize():void
            Alert.show("Module Initialized");
        [MessageHandler(scope="local")]
        public function openViewMessageHandler(message:OpenViewMessage):void
            Alert.show("Opening view " + message.viewId + " in the module " + message.moduleId);
If i uncomment the basicLoadPolicy in LazyModulePod.mxml and remove the lazyModuleLoadPolicy, everything works fine. The module is loaded when it's added to stage and it receives correctly messages dispatched to it. But with the lazy policy the module never loads.
I may have missed something or there is somthing i don't understand because i tried the ModuleTest provided in example in cairngorm sources. It works fine (i mean loading the moduleA2 when receiving a message), but if i replace the change the lazyModulePolicy to listen to broadcasted messages instead of a pingMessage, the module never loads too.
    <cairngorm:LazyModuleLoadPolicy objectId="lazyLoadPolicy" type="{ BroadcastMessage }" />
    <cairngorm:ModuleMessageInterceptor
        type="{ BroadcastMessage }" moduleRef="moduleA" />
public class BroadcastMessage
    public function BroadcastMessage()
If someone has any clue, i'll be happy to test it =)
Thanks.

Hello, back on my issue, i tested a little bit more the message dispaching.
I read the lazyLoadPolicy class and noticed that it always has to have a ModuleId property in the message to work, that's why the broadcast message didn't work to awake the module with the lazy loading policy.
So i added copy of my module:
     <cairngorm:ParsleyModuleDescriptor objectId="test"
          url="TestModule.swf"
          applicationDomain="{ClassInfo.currentDomain}"
     />
     <cairngorm:ParsleyModuleDescriptor objectId="testbis"
          url="TestModuleBis.swf"
          applicationDomain="{ClassInfo.currentDomain}"
     />
Set them both with a basicLoadPolicy, and tries to dispatch a message to only one of them using the ModuleId metatag. I then noticed that both modules received the message and not only the one i expected.
I then changed the ModuleMessageInterceptor configuration to dispatch to only one kind of module:
<cairngorm:ModuleMessageInterceptor type="{ OpenViewMessage }" moduleRef="test"/>
and this worked as expected. Only the first module catched the message. I am obiously messing with the ModuleId metatag but i cannot see what's wrong...
I compiled with
-keep-as3-metadata+=ModuleId
but this hasn't changed anything...

For the last 2 days whenever I try to upload photos from my iPhoto page to facebook I get an error message: Bad Image There was a problem with the image file. I haven't knowingly changed any settings on iPhoto or facebook. Can anyone help, please ?

I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
Bad Image
There was a problem with the image file.
Please help.

Can you drag it to the Desktop?

I have a problem with vertical images burned on a cd

I have a problem with vertical images burned on a cd either from a Mac or a stand alone burner. What happens is the images come from the card and are put on the cd. Also note the the camera has been set for the computer to automatically show images vertically when shot that way. The images look good on my Mac, but are horizontal on windows computers. Both XP and Vista. What can be done?
John

Hi, thank you for the response... not sure looks that the battery its ok, I'm not sure.
Charge Information:
Charge remaining (mAh):    4356
Fully charged:    Yes
Charging:    No
Full charge capacity (mAh):    4356
Health Information:
Cycle count:    813
Condition:    Normal
Battery Installed:    Yes
Amperage (mA):    0
Voltage (mV):    12571

I have problems with uploading images to my printing company have the images have been manipulated through CS6 i have saved images as jpeg but the printer company tell me they are not j peg, they will not upload images save from a camera are fine

I have problems with uploading images to my internet printing company when the images have been manipulated through CS6 and i have saved images as jpeg the printer company tell me they are not j peg,
but images saved from my phone or camera images that have not been manipulated upload fine, What am i doing wrong?

Save/Export them as JPG. Photoshop defaults to PSD, so make sure you select JPG and not just rename the file to .jpg.
There are two ways to save them as JPG: Regular Save as option or Save for Web & Devices
Take your pick.

Problem with displaying image

Hello!
Sorry, I'm a beginner in APEX and have some problems with displaying images in my application. I have read the same topic but unfortunately didnt find the solution.
So.. I have the interactive report
table test (
NAME NOT NULL VARCHAR2(4000)
ID NUMBER
BLOB_CONTENT BLOB
MIME_TYPE VARCHAR2(4000))
I need to display the column blob_content.
Thnks a lot.

1009316 wrote:
Hello! Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your forum profile with a real handle instead of "1009316".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
Sorry, I'm a beginner in APEX and have some problems with displaying images in my application. I have read the same topic but unfortunately didnt find the solution.
So.. I have the interactive report
table test (
NAME NOT NULL VARCHAR2(4000)
ID NUMBER
BLOB_CONTENT BLOB
MIME_TYPE VARCHAR2(4000))
I need to display the column blob_content.This is described in the documentation: About BLOB Support in Forms and Reports and Display Image. There's an OBE tutorial that followed the introduction of declarative BLOB support in 3.1 as well.

Problem with whitespace then loading and saving xml

i do not know how to handle this problem. i modifed a texteditor to send XML to a server and load XML back to the container.
but then i do changes to the Textlayout it shows up like this --->
Text in Container not modifed
Text in Container modifed ---> with space beween the colorchanged string
Text inContainersend and loaded ---> i think this has something to to with the
TextFilter.export(_textFlow,TextFilter.TEXT_LAYOUT_FORMAT,ConversionType.XML_TYPE)
can someone give me a hint...

Hi,
the link is --->
http://www.horstmann-architekten.de/contentmanagment/SimpleEditor.html
its a modified example of the texteditor provided by Adobe. You can send a xml to the server. and also read it from the server. You just use the xml identifer to give the xml a name.
Try it out:
1. change the text and
2. give a XML-Identifer
   and then send it to the server. --> send to server
3. type in the XML-Identifer you have used and
4.   load it from the server ---> Load from Server Button
evering works ok exept the columns formating.
I Think the colums Formating is not embeded in the XML as it should be. I attached the Files. (Newbie programmer)
With best regards
Michael Sprinzl
--- robin.briggs <[email protected]> schrieb am Do, 17.9.2009:
Von: robin.briggs <[email protected]>
Betreff: Problem with whitespace then loading and saving xml
An: "Michael sprinzl" <[email protected]>
Datum: Donnerstag, 17. September 2009, 2:12
Sounds like you have two different issues going on: (1) inline graphics aren't coming out correctly when you use the TextLineFactory, and (2) columns aren't working correctly. It's difficult for me to tell by looking at the application you link what is going wrong. One of the examples does seem to have columns working -- can you be more specific about what you're doing, and what results you are seeing? As for the inline graphics, there is a timing issue involved with using URLs, due to the asynchronous loading. See this comment in the docs for TextFlowTextLineFactory:
Note: When using inline graphics, the source property of the InlineGraphicElement object   must either be an instance of a DisplayObject or a Class object representing an embedded asset.   URLRequest objects cannot be used. The width and height of the inline graphic at the time the line   is created is used to compose the flow.
- robin

Problem with scramb image MULTI DISTORTION COLOR

PROBLEM WITH IMAGE, SOMETIMES ITS DISTORTIONATED, AND SLOW

Are you writing of problems with the image displayed on your screen? Anyway that you can post a screenshot (to make a whole screenshot, hold down the Shift, Command and 3 keys at the same time). Upload your screenshot using the camera icon in the composition bar above.
It would also help to know which model MacBook Pro you have - 15" late 2011, for example.
Clinton

Problem with Atf, Image distortion

I got a problem with image Distortion
Here my atf in atf viewer: [IMG]http://i.imgur.com/d75aU.png[/IMG]
Heres my atf in FLashPlayer using 11.4.402.287: [IMG]http://i.imgur.com/H2vEV.png[/IMG]
notice the red pixel in the green part of the texture.
Im using png2atf with no parameters.

Are you writing of problems with the image displayed on your screen? Anyway that you can post a screenshot (to make a whole screenshot, hold down the Shift, Command and 3 keys at the same time). Upload your screenshot using the camera icon in the composition bar above.
It would also help to know which model MacBook Pro you have - 15" late 2011, for example.
Clinton

I am facing a Problem with reading images from database

Hi everybody..
any help will be most appreciated, I am facing problem with reading images from database. I am pasting my code...
string connect = "datasource = localhost; port = 3306; username = root; password = ;";
MySqlConnection conn = new MySqlConnection(connect); // creating connecting string
MySqlCommand sda = new MySqlCommand(@"select * from management.add_products ", conn); //creating query
MySqlDataReader reader;
try
conn.Open(); // Opening Connection
reader = sda.ExecuteReader(); // Executing my Query..
while (reader.Read())
byte[] imgg = (byte[])(reader["Picture"]);
if (imgg == null)
pc1.Image = null;
else
MemoryStream mstream = new MemoryStream(imgg);
pc1.Image = System.Drawing.Image.FromStream(mstream);
It says Parameter not Valid... i am reading all the images from database

I agree with Viorel. You are getting the error because the format of the data is incorrect probably because the data was modify. It may not be the reading of the database the is incorrect, but the application that wrote the data into the database. You need
to compare the imgg array data with the data before it was written to the database to see if the data matches. I usually start by comparing the number of bytes which is easier to check then compare the actual to isolate which function is changing the
byte count.
An image is binary data. The standard VS methods for reading and writing data (usually stream classes) default to ASCII encoding which will corrupt binary data. The solution usually is to use UTF8 encoding instead of the default ascii encoding.
Ascii encoding with stream often aligns the data and adds extra null bytes to the end of the data which can produce these type errors.
jdweng

Problem with displaying images exported to PS

This is slightly different than the post about TIFF files not displaying properly.
In Aperture 1.2, when I exported an image to PS and did extensive work on it, and then saved back to Aperture, it would appear in Aperture just as it looked in PS when I saved it.
However, in 1.5, that does not happen. After I save the image, and then go back to Aperture, all of the changes I made in PS don't appear! However, if I again open the image in PS a second time, it will change to the PS version even before the image gets to PS (I can see it change right when I click "open with external editor").
Is this a difference with how 1.2 and 1.5 handle the files? I'm guessing it has something to do with image previews, because I chose not to have Aperture generate previews when I installed 1.5 due to the slow-down issues I saw reported here.
I'm starting to wonder what the point of upgrading to 1.5 was for me... if I can't take advantage of previews (accessing my Aperture library from other apps like Keynote, etc) and if the PS files I work on don't display properly, I'd rather go back to 1.2. This is a major problem in my workflow, since I often spend a lot of time working on images in PS, and I need to be able to see them that way when I return to Aperture.
I'm hoping there's some setting somewhere I can use to fix this. Is there?

David,
I really appreciate your offer to help. However, I have the problem with all images in my library in all projects, so I'm not sure how useful it would be for you to work with a single image I upload to a server.
I'm having the same problem on my MacBook too, though for some unknown reason there are certain projects on my MacBook that the process works fine with. I cannot tell any difference between those projects (that work) and those that don't.
What's even more strange... if I quit Aperture, and re-open it, and then go through the process (open a file in PS2, save, return to Aperture) - it works fine! But ONLY ONE TIME. If I try the same process again, on that same image, or any other image in my library, it will not work. It only works the FIRST TIME I do it after opening Aperture. I tested this several times and got the same result.
I am completely stumped here. I've tried generating previews for a project and turning all of the preview options on, but that doesn't solve the problem either.
Anyone out there have a clue what might be happening? This is more than a minor inconvenience... if my image management system can't display the image as it should appear, it's unusable.
Chris

Why do i have a problem with accessing images in adobe muse

why do i have a problem with accessing images in adobe muse ??????!!!!!
i need heeeeeelp ASAP
pleeeeease

I am on the begining stages with constructing the web so i do not have yet URL. The problem is i can not insert any image any way. Whether by fill a browser or by place image, i have the same issue. All the images with all image's format unable to be selected and it is turned off
I really need help plz
Is there any info i can supply that would help you figiring out the problem ??

Problem with an image load

Similar Messages

Maybe you are looking for